A genetic algorithm/method of moments approach to the optimization of an RF coil for MRI applications - Theoretical considerations - Abstract

A Combined Genetic Algorithm and Method of Moments design methods is presented for the design of unusual near-field antennas for use in Magnetic Resonance Imaging systems. The method is successfully applied to the design of an asymmetric coil structure for use at 190MHz and demonstrates excellent radiofrequency field homogeneity.

Theoretical and experimental studies of unbraced tubular trusses allowing for torsional stiffness

This paper describes the buckling phenomenon of a tubular truss with unsupported length through a full-scale test and presents a practical computational method for the design of the trusses allowing for the contribution of torsional stiffness against buckling, of which the effect has never been considered previously by others. The current practice for the design of a planar truss has largely been based on the linear elastic approach which cannot allow for the contribution of torsional stiffness and tension members in a structural system against buckling. The over-simplified analytical technique is unable to provide a realistic and an economical design to a structure. In this paper the stability theory is applied to the second-order analysis and design of the structural form, with detailed allowance for the instability and second-order effects in compliance with design code requirements. Finally, the paper demonstrates the application of the proposed method to the stability design of a commonly adopted truss system used in support of glass panels in which lateral bracing members are highly undesirable for economical and aesthetic reasons.

An approach to verifying and debugging simulation models governed by ordinary differential equations: Part 1. Methodology for residual generation

For dynamic simulations to be credible, verification of the computer code must be an integral part of the modelling process. This two-part paper describes a novel approach to verification through program testing and debugging. In Part 1, a methodology is presented for detecting and isolating coding errors using back-to-back testing. Residuals are generated by comparing the output of two independent implementations, in response to identical inputs. The key feature of the methodology is that a specially modified observer is created using one of the implementations, so as to impose an error-dependent structure on these residuals. Each error can be associated with a fixed and known subspace, permitting errors to be isolated to specific equations in the code. It is shown that the geometric properties extend to multiple errors in either one of the two implementations. Copyright (C) 2003 John Wiley Sons, Ltd.

An approach to verifying and debugging simulation models governed by ordinary differential equations: Part 2. Residuals analysis and a case study

In Part 1 of this paper a methodology for back-to-back testing of simulation software was described. Residuals with error-dependent geometric properties were generated. A set of potential coding errors was enumerated, along with a corresponding set of feature matrices, which describe the geometric properties imposed on the residuals by each of the errors. In this part of the paper, an algorithm is developed to isolate the coding errors present by analysing the residuals. A set of errors is isolated when the subspace spanned by their combined feature matrices corresponds to that of the residuals. Individual feature matrices are compared to the residuals and classified as 'definite', 'possible' or 'impossible'. The status of 'possible' errors is resolved using a dynamic subset testing algorithm. To demonstrate and validate the testing methodology presented in Part 1 and the isolation algorithm presented in Part 2, a case study is presented using a model for biological wastewater treatment. Both single and simultaneous errors that are deliberately introduced into the simulation code are correctly detected and isolated. Copyright (C) 2003 John Wiley Sons, Ltd.

A metalinguistic approach to deconstructing the concepts of 'face' and 'politeness' in Chinese, English and Japanese

In this paper we investigate the concepts of 'face' and 'politeness'. We introduce a metalanguage which we believe is a framework for simplifying the analysis of 'face' and 'politeness'. This metalanguage is based on the observation that both 'face' and 'politeness' involve external evaluations of people. This common element is represented in the metalanguage as B what A shows A thinks of B and what B thinks A thinks of B. The implications of the metalanguage for the analysis of Chinese mian and lion ('face') and English face are then discussed. This is followed by an analysis of examples of politeness in English and teineisa ('politeness') in Japanese. We conclude that the metalanguage may be further developed for use in comparisons of 'face' and 'politeness' across cultures. (C) 2003 Elsevier B.V. All rights reserved.

Balancing the number and size of sites: An economic approach to the optimal design of cluster samples

The design of randomized controlled trials entails decisions that have economic as well as statistical implications. In particular, the choice of an individual or cluster randomization design may affect the cost of achieving the desired level of power, other things being equal. Furthermore, if cluster randomization is chosen, the researcher must decide how to balance the number of clusters, or sites, and the size of each site. This article investigates these interrelated statistical and economic issues. Its principal purpose is to elucidate the statistical and economic trade-offs to assist researchers to employ randomized controlled trials that have desired economic, as well as statistical, properties. (C) 2003 Elsevier Inc. All rights reserved.

Quantum theory of the far-off-resonance continuous-wave Raman laser: Heisenberg-Langevin approach

We present the quantum theory of the far-off-resonance continuous-wave Raman laser using the Heisenberg-Langevin approach. We show that the simplified quantum Langevin equations for this system are mathematically identical to those of the nondegenerate optical parametric oscillator in the time domain with the following associations: pump pump, Stokes signal, and Raman coherence idler. We derive analytical results for both the steady-state behavior and the time-dependent noise spectra, using standard linearization procedures. In the semiclassical limit, these results match with previous purely semiclassical treatments, which yield excellent agreement with experimental observations. The analytical time-dependent results predict perfect photon statistics conversion from the pump to the Stokes and nonclassical behavior under certain operational conditions.

Representing organizational structures in enterprise architecture : an ontology-based approach

Arquitetura Corporativa promove o estabelecimento de uma visão holística da estrutura e forma de trabalho de uma organização. Um dos aspectos abordados em Arquitetura Corporativa está associada a "estrutura ativa" da organização, que diz respeito a “quem" realiza as atividades organizacionais. Várias abordagens têm sido propostas a fim de proporcionar um meio para a representação de Arquitetura Corporativa, entre as quais ARIS, RM-ODP, UPDM e ArchiMate. Apesar da aceitação por parte da comunidade, as abordagens existentes se concentram em propósitos diferentes, têm limitações de escopo e algumas não têm semântica de mundo real bem definida. Além das abordagens de modelagem, muitas abordagens de ontologias têm sido propostas, a fim de descrever o domínio de estrutura ativa, incluindo as ontologias de SUPER Project, TOVE, Enterprise Ontology e W3C Org Ontology. Embora especificadas para fundamentação semântica e negociação de significado, algumas das abordagens propostas têm fins específicos e cobertura limitada. Além disso, algumas das abordagens não são definidas usando linguagens formais e outras são especificadas usando linguagens sem semântica bem definida. Este trabalho apresenta uma ontologia de referência bem fundamentada para o domínio organizacional. A ontologia organizacional de referência apresentada abrange os aspectos básicos discutidos na literatura organizacional, tais como divisão do trabalho, relações sociais e classificação das unidades estruturais. Além disso, também abrange os aspectos organizacionais definidos em abordagens existentes, levando em consideração tanto abordagens de modelagem quanto abordagens ontológicas. A ontologia resultante é especificada em OntoUML e estende os conceitos sociais de UFO-C.

Tecnologia assistiva e computacional : contribuições para o atendimento educacional especializado e desafios na formação de professores

Neste trabalho, analisamos aspectos relacionados a como a tecnologia computacional é utilizada no Atendimento Educacional Especializado (AEE) e como se deu a formação de professores para utilizar esses recursos. Para tanto, delimitamos os seguintes objetivos específicos: investigar a utilização da tecnologia assistiva (TA) computacional no âmbito das salas de recursos multifuncionais (SRM); problematizar as tensões, dificuldades e possibilidades relacionadas à TA com ênfase na tecnologia computacional para o AEE; analisar a formação do professor de educação especial para o AEE tendo como recurso a TA com ênfase na tecnologia computacional, visando à mediação dos processos de aprendizagem. O aporte teórico deste trabalho foi a abordagem histórico-cultural, tomando por referência os estudos de Vigotski e seus colaboradores. Trata-se de uma pesquisa qualitativa que fez uso de diferentes instrumentos metodológicos como, os grupos focais, o questionário online e a entrevista semiestruturada. Para desenvolvê-lo, realizamos a coleta de dados em diferentes contextos, começando pelos grupos focais da pesquisa inaugural do Oneesp, que serviram como dispositivo para esta pesquisa, seguida da aplicação de um questionário aos professores participantes da pesquisa-formação desenvolvida como um desdobramento no estado do Espírito Santo da pesquisa inaugural do Oneesp pelos integrantes do Oeeesp e da aplicação in loco de entrevistas semiestruturadas com professores de educação especial, de uma SRM do Tipo II. Foram oitenta e nove professores participantes na pesquisa do Oneesp, trinta professores na pesquisa-formação do Oeeesp e dois professores para aplicação da entrevista semiestruturada in loco, respectivamente. Esses dois professores participaram tanto da pesquisa do Oneesp como da pesquisa do Oeeesp. Analisamos esses três momentos, dos quais emergiram os apontamentos que nos proporcionaram pensar, com base nas narrativas orais e escritas dos professores: sua formação para uso da TA computacional; seu entendimento sobre sua formação para este fim; seus anseios por uma formação mais direcionada; a forma como utilizam a tecnologia na sala de recursos; seus entendimentos sobre as dificuldades e possibilidades relacionadas a TA com ênfase na tecnologia computacional para o AEE. Após essas análises, concluímos que poucos professores que atuam nas SRM tiveram uma formação que possibilitasse a aplicação das tecnologias computacionais em sua mediação pedagógica, aliando teoria e prática, com momentos de formação que privilegiassem os momentos presenciais e em laboratórios, onde possam interagir com os computadores e suas ferramentas simbólicas. Sem essa familiaridade com os recursos computacionais, os professores acabam sentindo-se inseguros para utilizá-los, deixando de potencializar, pela via desses recursos, os processos de ensinoaprendizagem do aluno com deficiência. Faz-se necessário um investimento nesse tipo de formação e, mais do que isso, que se viabilize para os professores que atuam ou que pretendem atuar nas SRM. A partir de uma formação apropriada é possível fazer com que os professores utilizem os recursos computacionais como mediadores dos processos de ensino-aprendizagem de seus alunos.

Rendering peacekeeping instrumental? The Brazilian approach to United Nations peacekeeping during the Lula da Silva years (2003-2010)

The article analyses how Brazilian state actions and policies regarding peace operations during the Presidency of Lula da Silva relate to the country's positions and attitudes towards United Nations peacekeeping. It argues that the inconsistencies identified on the Brazilian positions reflect the lack of a clear strategic horizon guiding the country's participation in UN peacekeeping, which consequentially hinders the country emergence as a great power.

Security issues during Lula's administration: from the reactive to the assertive approach

Brazil's security agenda during Lula's administration was not homogeneous through the two mandates: the first tenure (2002-2006) revealed a reactive approach towards security topics, while the second one (2006-2010) was more assertive. More specifically, the shift occurred in terms of both its geographical scope - once it incorporated global issues in a more systematic way -, and instruments through which the security agenda was exercised, given the multilateral initiative of Unasur's CDS

Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

A practical framework for the generation and selection of strategic plans of action, The relevance of timeframe considerations and a systems thinking approach

The paper proposes a methodology especially focused on the generation of strategic plans of action, emphasizing the relevance of having a structured timeframe classification for the actions. The methodology explicitly recognizes the relevance of long-term goals as strategic drivers, which must insure that the complex system is capable to effectively respond to changes in the environment. In addition, the methodology employs engineering systems techniques in order to understand the inner working of the system and to build up alternative plans of action. Due to these different aspects, the proposed approach features higher flexibility compared to traditional methods. The validity and effectiveness of the methodology has been demonstrated by analyzing an airline company composed by 5 subsystems with the aim of defining a plan of action for the next 5 years, which can either: improve efficiency, redefine mission or increase revenues.