Reliability and Failure Modes of Implant-Supported Y-TZP and MCR Three-Unit Bridges

Purpose: Chipping within veneering porcelain has resulted in high clinical failure rates for implant-supported zirconia (yttria-tetragonal zirconia polycrystals [Y-TZP]) bridges. This study evaluated the reliability and failure modes of mouth-motion step-stress fatigued implant-supported Y-TZP versus palladium-silver alloy (PdAg) three-unit bridges. Materials and Methods: Implant-abutment replicas were embedded in polymethylmethacrylate resin. Y-TZP and PdAg frameworks, of similar design (n = 21 each), were fabricated, veneered, cemented (n = 3 each), and Hertzian contact-tested to obtain ultimate failure load. In each framework group, 18 specimens were distributed across three step-stress profiles and mouth-motion cyclically loaded according to the profile on the lingual slope of the buccal cusp of the pontic. Results: PdAg failures included competing flexural cracking at abutment and/or connector area and chipping, whereas Y-TZP presented predominantly cohesive failure within veneering porcelain. Including all failure modes, the reliability (two-sided at 90% confidence intervals) for a ""mission"" of 50,000 and 100,000 cycles at 300 N load was determined (Alta Pro, Reliasoft, Tucson, AZ, USA). No difference in reliability was observed between groups for a mission of 50,000. Reliability remained unchanged for a mission of 100,000 for PdAg, but significantly decreased for Y-TZP. Conclusions: Higher reliability was found for PdAg for a mission of 100,000 cycles at 300 N. Failure modes differed between materials.

Implant Abutment Deformation During Prosthetic Cylinder Screw Tightening: An In Vitro Study

Purpose: Nonpassive fit frameworks are believed to lead to implant overload and consequently loss of osseointegration. This is one of the most commonly reported failures of implant prostheses. In an ideal situation of passive fit, when torque is applied to bring the abutment-cylinder interface together some amount of deformation can be expected, and it should be homogeneous along the periphery of the abutment. The aim of this study was to verify the amount of abutment deformation that can be expected when a free-standing cylinder is screwed into place. This could give insight into what should be accepted as passive fit. Materials and Methods: Strain gauges were bonded to the sides of five standard abutments that had machined palladium-silver cylinders or cobalt-chromium cast cylinders screwed into place. Measurements were taken to verify the deformation at each site. Results: Values of abutment deformation after abutment screw tightening ranged from -127.70 to -590.27 mu epsilon. The deformation recorded for palladium-silver prosthetic cylinder tightening ranged from 56.905 to -381.50 mu epsilon (mean: 173.298 mu epsilon) and from -5.62638 to -383.86 mu epsilon ( mean: 200.474 mu epsilon) for cobalt-chromium cylinders. There was no statistically significant difference among the two groups. Conclusion: Both abutment screw tightening and prosthetic cylinder screw tightening result in abutment deformation, which is compressive most of the time. Int J Prosthodont 2009; 22: 391-395.

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

The purpose of this in vitro study was to analyze the stress distribution on components of a mandibular-cantilevered implant-supported prosthesis with frameworks cast in cobalt-chromium (Co-Cr) or palladium-silver (Pd-Ag) alloys, according to the cantilever length. Frameworks were fabricated on (Co-Cr) and (Pd-Ag) alloys and screwed into standard abutments positioned on a master-cast containing five implant replicas. Two linear strain gauges were fixed on the mesial and distal aspects of each abutment to capture deformation. A vertical static load of 100 N was applied to the cantilever arm at the distances of 10, 15, and 20 mm from the center of the distal abutment and the absolute values of specific deformation were recorded. Different patterns of abutment deformation were observed according to the framework alloy. The Co-Cr alloy framework resulted in higher levels of abutment deformation than the silver-palladium alloy framework. Abutment deformation was higher with longer cantilever extensions. Physical properties of the alloys used for framework interfere with abutment deformations patterns. Excessively long cantilever extensions must be avoided. To cite this article:Jacques LB, Moura MS, Suedam V, Souza EAC, Rubo JH. Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses.Clin. Oral Impl. Res. 20, 2009; 737-741.doi: 10.1111/j.1600-0501.2009.01712.x.

Effect of abutment`s height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis

In cantilevered implant-supported complete prosthesis, the abutments` different heights represent different lever arms to which the abutments are subjected resulting in deformation of the components, which in turn transmit the load to the adjacent bone. The purpose of this in vitro study was to quantitatively assess the deformation of abutments of different heights in mandibular cantilevered implant-supported complete prosthesis. A circular steel master cast with five perforations containing implant replicas (O3.75 mm) was used. Two groups were formed according to the types of alloy of the framework (CoCr or PdAg). Three frameworks were made for each group to be tested with 4, 5.5 and 7 mm abutments. A 100 N load was applied at a point 15 mm distal to the center of the terminal implant. Readings of the deformations generated on the mesial and distal aspects of the abutments were obtained with the use of strain gauges. Deformation caused by tension and compression was observed in all specimens with the terminal abutment taking most of the load. An increase in deformation was observed in the terminal abutment as the height was increased. The use of an alloy of higher elastic modulus (CoCr) also caused the abutment deformation to increase. Abutment`s height and framework alloy influence the deformation of abutments of mandibular cantilevered implant-supported prosthesis. To cite this article:Suedam V, Capello SouzaEA, Moura MS, Jacques LB, Rubo JH. Effect of abutment`s height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis. Clin. Oral Impl. Res. 20, 2009; 196-200.doi: 10.1111/j.1600-0501.2008.01609.x.

Fatigue life and failure modes of crowns systems with a modified framework design

Objectives: To evaluate the effect of framework design on the fatigue life and failure modes of metal ceramic (MC, Ni-Cr alloy core, VMK 95 porcelain veneer), glass-infiltrated alumina (ICA, In-Ceram Alumina/VM7), and veneered yttria-stabilized tetragonal zirconia polycrystals (Y-TZP, IPSe.max ZirCAD/IPS e.max,) crowns. Methods: Sixty composite resin tooth replicas of a prepared maxillary first molar were produced to receive crowns systems of a standard (MCs, ICAs, and Y-TZPs, n = 10 each) or a modified framework design (MCm, ICAm, and Y-TZPm, n = 10 each). Fatigue loading was delivered with a spherical steel indenter (3.18 mm radius) on the center of the occlusal surface using r-ratio fatigue (30-300 N) until completion of 10(6) cycles or failure. Fatigue was interrupted every 125,000 cycles for damage evaluation. Weibull distribution fits and contour plots were used for examining differences between groups. Failure mode was evaluated by light polarized and SEM microscopy. Results: Weibull analysis showed the highest fatigue life for MC crowns regardless of framework design. No significant difference (confidence bound overlaps) was observed between ICA and Y-TZP with or without framework design modification. Y-TZPm crowns presented fatigue life in the range of MC crowns. No porcelain veneer fracture was observed in the MC groups, whereas ICAs presented bulk fracture and ICAm failed mainly through the veneer. Y-TZP crowns failed through chipping within the veneer, without core fractures. Conclusions: Framework design modification did not improve the fatigue life of the crown systems investigated. Y-TZPm crowns showed comparable fatigue life to MC groups. Failure mode varied according to crown system. (C) 2010 Elsevier Ltd. All rights reserved.

Class III subdivision malocclusion corrected with asymmetric intermaxillary elastics

Correcting a Class III subdivision malocclusion is usually a challenge for an orthodontist, especially if the patient`s profile does not allow for any extractions. One treatment option is to use asymmetric intermaxillary elastics to correct the unilateral anteroposterior discrepancy. However, the success of this method depends on the individual response of each patient and his or her compliance in using the elastics. The objectives of this article were to present a successful treatment of a Class III subdivision patient with this approach and to illustrate and discuss the dentoskeletal changes that contributed to the correction. (Am J Orthod Dentofacial Orthop 2010;138:221-30)

Language and disability in Japan

Language relating to disability in the public arena has been a sensitive issue in Japan as elsewhere. Since the 1970s and 80s, major media organisations have replaced words considered derogatory with more acceptable equivalents; laws, statutes and other legal documents have likewise been revised. This article examines how the language used to portray people with disabilities has changed, how the changes came about and how they were received. The debate has largely been played out in four public spaces, which to some extent intersect and overlap: the media (both print and visual), the laws, literature and, increasingly now, the Internet. I argue that while the laws were rewritten primarily as the result of external international trends, such as the International Year of Disabled Persons, disability groups achieved media compliance mainly by exploiting the keen desire of Japanese media organisations to avoid public embarrassment resulting from vocal protests over infractions.

Pulmonary vascular remodeling: a target for therapeutic intervention in pulmonary hypertension

Pulmonary vascular remodeling is an important pathological feature of pulmonary hypertension, leading to increased pulmonary vascular resistance and reduced compliance. It involves thickening of all three layers of the blood vessel wall (due to hypertrophy and/or hyperplasia of the predominant cell type within each layer), as well as extracellular matrix deposition. Neomuscularisation of non-muscular arteries and formation of plexiform and neointimal lesions also occur. Stimuli responsible for remodeling involve transmural pressure, stretch, shear stress, hypoxia, various mediators [angiotensin II, endothelin (ET)-1, 5-hydroxytryptamine, growth factors, and inflammatory cytokines], increased serine elastase activity, and tenascin-C. In addition, there are reductions in the endothelium-derived antimitogenic substances, nitric oxide, and prostacyclin. Intracellular signalling mechanisms involved in pulmonary vascular remodeling include elevations in intracellular Ca2+ and activation of the phosphatidylinositol pathway, protein kinase C, and mitogen-activated protein kinase. In animal models of pulmonary hypertension, various drugs have been shown to attenuate pulmonary vascular remodeling. These include angiotensin-converting enzyme inhibitors, angiotensin receptor antagonists, ET receptor antagonists, ET-converting enzyme inhibitors, nitric oxide, phosphodiesterase 5 inhibitors, prostacyclin, Ca2+-channel antagonists, heparin, and serine elastase inhibitors. Inhibition of remodeling is generally accompanied by reductions in pulmonary artery pressure. The efficacy of some of the drugs varies, depending on the animal model of the disease. In view of the complexity of the remodeling process and the diverse aetiology of pulmonary hypertension in humans, it is to be anticipated that successful anti-remodeling therapy in the clinic will require a range of different drug options. (C) 2001 Elsevier Science Inc. All rights reserved.

New perspectives on the role of aldosterone excess in cardiovascular disease

1. Evidence from recent experimental and clinical studies suggests that excessive circulating levels of aldosterone can bring about adverse cardiovascular sequelae independent of the effects on blood pressure. Examples of these sequelae are the development of myocardial and vascular fibrosis in uninephrectomized, salt-loaded rats infused with mineralocorticoids and, in humans, an association of aldosterone with left ventricular hypertrophy, impaired diastolic and systolic function, salt and water retention causing aggravation of congestion in patients with established congestive cardiac failure (CCF), reduced vascular compliance and an increased risk of arrhythmias (resulting from intracardiac fibrosis, hypokalaemia, hypomagnesaemia, reduced baroreceptor sensitivity and potentiation of catecholamine effects). 2. These sequelae of aldosterone excess may contribute to the pathogenesis and worsen the prognosis of CCF and hypertension. 3. The heart and blood vessels may be capable of extra-adrenal aldosterone biosynthesis, raising the possibility that aldosterone may have paracrine or autocrine (and not just endocrine) effects on cardiovascular tissues. 4. The high prevalence of CCF, which is associated with secondary aldosteronism, and primary aldosteronism (PAL; recently recognized to be a much more common cause of hypertension than was previously thought) argue for an important role for aldosterone excess as a cause of cardiovascular injury. 5. The recognition of non-blood pressure-dependent adverse sequelae of aldosterone excess raises the question as to whether normotensive individuals with PAL, who have been detected as a result of genetic or biochemical screening among families with inherited forms of PAL, are at excess risk of cardiovascular events. 6. Provided that patients are carefully investigated in order to permit the appropriate selection of specific surgical (laparoscopic adrenalectomy for PAL that lateralizes on adrenal venous sampling) or medical (treatment with aldosterone antagonist medications) management and safety considerations for the use of aldosterone antagonists are kept in mind, the appreciation of a widening role for aldosterone in cardiovascular disease should provide a substantially better outlook for many patients with CCF and hypertension.

Living with under-fives: a programme for parents with a mental illness

Parenthood is considered a major life role. Yet for people with a major mental illness, it is one that is fraught with difficulties and for which they receive the least support. Research on parenting and parenting programmes for people with a major mental illness is sparse and most of the papers presented do not provide a working model that can be easily replicated. This lack of support for parents or knowledge of working parenting programmes has often resulted in children being placed in care. Occupational therapists working in an Australian mental health service developed a two-stream programme which aimed to consolidate the parent/child relationship and enable the parents to develop effective parenting skills. This programme has a parents' educational stream and a stream with developmentally appropriate activities for the children. Observed outcomes have included the parents becoming more responsive to their children, increased treatment compliance, improved community access, and a decrease in the number of children in temporary foster care.

Briefing: Factored material properties and limit state loads-unlikely extreme or impossible pretense

In the limit state design (LSD) method each design criterion is formally stated and assessed using a performance function. The performance function defines the relationship between the design parameters and the design criterion. In practice, LSD involves factoring up loads and factoring down calculated strengths and material parameters. This provides a convenient way to carry out routine probabilistic-based design. The factors are statistically calculated to produce a design with an acceptably low probability of failure. Hence the ultimate load and the design material properties are mathematical concepts that have no physical interpretation. They may be physically impossible. Similarly, the appropriate analysis model is also defined by the performance function and may not describe the real behaviour at the perceived physical equivalent limit condition. These points must be understood to avoid confusion in the discussion and application of partial factor LSD methods.

Alpha-conotoxins: Nicotinic acetylcholine receptor antagonists as pharmacological tools and potential drug leads

Alpha-Conotoxins are small disulfide rich peptides from the venoms of marine cone snails. They target specific nicotinic acetylcholine receptor (nAChR) subtypes with high affinity and potency and are therefore valuable as neurophamacological probes and potential drug leads. This article gives a general overview of the chemical and biological features of alpha -conotoxins, including their pharmacology, binding interactions and structure. A detailed analysis of recently reported three-dimensional structures from members of different subfamilies of the alpha -conotoxins, including those with 3/5, 4/3, 4/6 and 4.7 spacings of their two intracysteine loops is given. The structures are generally well defined and represent useful frameworks for the display of amino acid residues to target molecules.

Adherence with naltrexone prescription advice in hospital outpatient alcohol rehabilitation programme

Background: The anti-craving drug, naltrexone, is used as a pharmacotherapeutic adjunct in the treatment of alcohol dependence. In addictive disorders, compliance issues remain central. There are limited data on compliance with naltrexone treatment regimens within formalized rehabilitation programs and even less data that identifies factors that have an impact on this. Objective: To study patient adherence to naltrexone medication regimens and examine whether patients' reported pre-treatment alcohol use, dependence severity and measures of psychological health are predictive of medication compliance. Method: Fifty outpatients meeting DSM IV criteria for alcohol dependence enrolled in 12-week rehabilitation programme. This included cognitive behavioural therapy (CBT) and naltrexone, 50 mg orally daily. Measures included: pharmacy prescription pick-up including number of tablets dispensed, programme attendance and patient pre-treatment alcohol use variables. Measures of psychological health included somatic symptoms, anxiety, social dysfunction and depression as measured by the General Health Questionnaire (GHQ-28). Results: Classifying the sample into compliant (greater than or equal to 90% medication pick-up) and less compliant groups, 66% of subjects were naltrexone-compliant. Pre-treatment alcohol use variables were not predictive of compliance. Although social dysfunction and depression tended towards poorer prescription filling, measures of psychological distress (GHQ-28) did not identify factors predictive of medication non-compliance. One patient withdrew from treatment because of naltrexone-induced dysphoria. Conclusion: Patients with alcohol dependence demonstrated high levels of anti-craving medication compliance, good rehabilitation programme participation and favourable outcomes. Naltrexone was well tolerated. Medication compliance in this study group compared well with those of other hospital populations with chronic disorders. Factors predictive of anti-craving medication compliance in alcohol dependence require further study.

Lipid-lowering therapy following major cardiac events: progress and deficits

Objective: To assess hospital prescribing of lipid-lowering agents in a tertiary hospital, and examine continuation of, or changes to, such therapy in the 6-18 months following discharge. Design: Retrospective data extraction from the hospital records of patients admitted from October 1998 to April 1999. These patients and their general practitioners were then contacted to obtain information about ongoing management after discharge. Setting: Tertiary public hospital and community. Participants: 352 patients admitted to hospital with acute myocardial infarction or unstable angina, and their GPs. Main outcome measures: Percentage of eligible patients discharged on lipid-lowering therapy and percentage of patients continuing or starting such therapy 6-18 months after discharge. Results: 10% of inpatients with acute coronary syndromes did not have lipid-level estimations performed or arranged during admission. Documentation of lipid levels in discharge summaries was poor. Eighteen per cent of patients with a total serum cholesterol level greater than 5.5 mmol/L did not receive a discharge prescription for a cholesterol-lowering agent. Compliance with treatment on follow-up was 88% in the group discharged on treatment. However, at follow-up, 70% of patients discharged without therapy had not been commenced on lipid-lowering treatment by their GPs. Conclusions: Prescribing of lipid-lowering therapy for secondary prevention following acute coronary syndromes remains suboptimal. Commencing treatment in hospital is likely to result in continuing therapy in the community. Better communication of lipid-level results, treatment and treatment aims between hospitals and GPs might encourage optimal treatment practices.

Conceptualising the virtual and the posthuman

This article aims to explore the relations between technology and the subject. With new media intensifying the provisionality of discursive structures and in turn embodied experiences, questions pertaining to virtuality have become vital, particularly since Western society's increasing reliance on technologies now permeates our everyday practices. While many theorists often resort to a reification of the subject when conceptualising the posthuman condition, this analysis will recover the notion of embodiment in order to avoid such technological determinism. Tracing this complexity in contemporary texts can be achieved through various means. Here, the focus will remain on how narrative frameworks can create new possibilities for understanding and interpreting shifting subjectivities in the digital age. To explore this, I shall provide an analysis of a contemporary film, Being John Malkovich, which has been chosen due to its unexpected success at the box office, indicating how finely attuned the film is to contemporary concerns.