Seasonal factors influencing the failure of buried water reticulation pipes

While the use of environmental factors in the analysis and prediction of failures of buried reticulation pipes in cold environments has been the focus of extensive work, the same cannot be said for failures occurring on pipes in other (non-freezing) environments. A novel analysis of pipe failures in such an environment is the subject of this paper. An exploratory statistical analysis was undertaken, identifying a peak in failure rates during mid to late summer. This peak was found to correspond to a peak in the rate of circumferential failures, whilst the rate of longitudinal failures remained constant. Investigation into the effect of climate on failure rates revealed that the peak in failure rates occurs due to differential soil movement as the result of shrinkage in expansive soils.

Sewer performance reporting : factors that influence blockages

Managing sewer blockages represents a significant operational challenge for water utilities. In Australia, company-level blockage rates are used to compare the effectiveness of the management strategies of different utilities. Anecdotal evidence suggests this may not be a fair basis for comparison because blockages are influenced by a range of factors beyond management control and that vary from company to company. This issue was investigated as part of a broader research effort on sewer blockage management undertaken in conjunction with the Water Services Association of Australia (WSAA) and its members. A Web-based survey was used to collate expert opinion on factors that influence blockage rate. The identified factors were then investigated in an exploratory analysis of blockage-related data provided by two participating utilities, supported by literature reviews. The results indicate that blockage rate is influenced by a range of factors, including asset attributes, climatic conditions, water consumption, and soil type. Since these factors vary from utility to utility, this research supports the assertion that company-level blockage rate is not in itself an appropriate metric for comparing management effectiveness.

A comparison of factors influencing perceived risk by French and Australian cyclists and drivers

Differences in the levels of risk perceived by cyclists and car drivers may contribute to the dangers in their interactions. Levels of perceived risk have been shown to vary according to personal and environmental factors and between countries. Cycling rates in France are higher than in Australia, particularly among women. This study investigated whether cultural differences between France and Australia are reflected in perceived risks for experienced adult cyclists and drivers in the two countries. In online surveys, regular cyclists (France 336, Australia 444) and drivers (France 92, Australia 151) were asked to rate the level of risk in six situations: failure to yield; going through a red light; not signalling when turning; swerving; tail-gating; and not checking traffic. The effects of type of interacting vehicle and participant type on perceived risk were similar in France and Australia. However, the influence of responsibility for the risky behaviour differed according to participant type, type of situation and nationality. When the bicycle rider committed the road rule violation, Australian cyclists and drivers gave higher risk ratings than French cyclists and drivers. In both countries, cyclists rated themselves significantly higher than drivers on the perceived control and overconfidence subscales of the perceived skill measure. The French cyclists rated themselves higher than Australian cyclists on these scales, which could be responsible for overall lower perceived risk levels when interacting with a bike. Australian cyclists rated themselves significantly lower than drivers on the incompetence subscale but French cyclists rated themselves higher than drivers. In both countries incompetence scores were positively related to levels of perceived risk. Weekly time was associated with perceived risk in Australia but not in France. Frequency of traffic violations was not associated with perceived risk in either country. In conclusion, levels of perceived risk differed between drivers and cyclists in both countries and were influenced by type of interacting vehicle, experience and perceived skill. However, some differences between the results from the two countries merit further investigation to shed light on potential improvements in safety and cycling participation.

A critical success factors model for enterprise resource planning implementation

Enterprise Resource Planning (ERP) systems are integrated enterprise-wide standard information systems that automate all aspects of an organisations’ business processes. The ERP philosophy is that business systems incorporating sales, marketing, manufacturing, distribution, personnel and finance modules can be supported by a single integrated system with all of the company’s data captured in a central database. The ERP packages of vendors such as SAP, Baan, J.D. Edwards and Intentia represent more than a common systems platform for a business. They prescribe information blueprints of how organisation’s business processes should operate. In this paper, the scale and strategic importance of ERP systems is identified and the problem of ERP implementation is defined. Five company examples are analysed using a Critical Success Factors (CSFs) theoretical framework. The paper offers a framework for managers which provides the basis for developing an ERP implementation strategy. The case analysis identifies different approaches to ERP implementation, highlights the critical role of legacy systems in influencing the implementation process, and identifies the importance of business process change and software configuration in addition to factors already cited in the literature such as top management support and communication. The implications of the results and future research opportunities are outlined.

Advance Care Planning in palliative care : a systematic literature review of the contextual factors influencing its uptake 2008-2012

Background: Advance Care Planning is an iterative process of discussion, decision-making and documentation about end-of-life care. Advance Care Planning is highly relevant in palliative care due to intersecting clinical needs. To enhance the implementation of Advance Care Planning, the contextual factors influencing its uptake need to be better understood. Aim: To identify the contextual factors influencing the uptake of Advance Care Planning in palliative care as published between January 2008 and December 2012. Methods: Databases were systematically searched for studies about Advance Care Planning in palliative care published between January 2008 and December 2012. This yielded 27 eligible studies, which were appraised using National Institute of Health and Care Excellence Quality Appraisal Checklists. Iterative thematic synthesis was used to group results. Results: Factors associated with greater uptake included older age, a college degree, a diagnosis of cancer, greater functional impairment, being white, greater understanding of poor prognosis and receiving or working in specialist palliative care. Barriers included having non-malignant diagnoses, having dependent children, being African American, and uncertainty about Advance Care Planning and its legal status. Individuals’ previous illness experiences, preferences and attitudes also influenced their participation. Conclusion: Factors influencing the uptake of Advance Care Planning in palliative care are complex and multifaceted reflecting the diverse and often competing needs of patients, health professionals, legislature and health systems. Large population-based studies of palliative care patients are required to develop the sound theoretical and empirical foundation needed to improve uptake of Advance Care Planning in this setting.

Activation of forkhead box O transcription factors by oncogenic BRAF promotes p21cip1-dependent senescence

Oncogene-induced senescence (OIS) is a potent tumor-suppressive mechanism that is thought to come at the cost of aging. The Forkhead box O (FOXO) transcription factors are regulators of life span and tumor suppression. However, whether and how FOXOs function in OIS have been unclear. Here, we show a role for FOXO4 in mediating senescence by the human BRAFV600E oncogene, which arises commonly in melanoma. BRAFV600E signaling through mitogen-activated protein kinase/extracellular signal-regulated kinase kinase resulted in increased reactive oxygen species levels and c-Jun NH 2 terminal kinase-mediated activation of FOXO4 via its phosphorylation on Thr223, Ser226, Thr447, and Thr451. BRAFV600E-induced FOXO4 phosphorylation resulted in p21cip1-mediated cell senescence independent of p16 ink4a or p27kip1. Importantly, melanocyte-specific activation of BRAFV600E in vivo resulted in the formation of skin nevi expressing Thr223/Ser226-phosphorylated FOXO4 and elevated p21cip1. Together, these findings support a model in which FOXOs mediate a trade-off between cancer and aging.

Psip1/Ledgf p52 binds methylated histone H3K36 and splicing factors and contributes to the regulation of alternative splicing

Increasing evidence suggests that chromatin modifications have important roles in modulating constitutive or alternative splicing. Here we demonstrate that the PWWP domain of the chromatin-associated protein Psip1/Ledgf can specifically recognize tri-methylated H3K36 and that, like this histone modification, the Psip1 short (p52) isoform is enriched at active genes. We show that the p52, but not the long (p75), isoform of Psip1 co-localizes and interacts with Srsf1 and other proteins involved in mRNA processing. The level of H3K36me3 associated Srsf1 is reduced in Psip1 mutant cells and alternative splicing of specific genes is affected. Moreover, we show altered Srsf1 distribution around the alternatively spliced exons of these genes in Psip1 null cells. We propose that Psip1/p52, through its binding to both chromatin and splicing factors, might act to modulate splicing.

Straminipilan protists : a study of their taxonomic position, morphology and abiotic stress-mediated gene expression

Thraustochytrids have become of considerable industrial and scientific interest in the past decade due to their health benefits. They have been proven to be the principle source in marine and estuarine fish diets with high percentage of long chain (LC) or polyunsaturated fatty acids (PUFA). Therefore, the oil extracted from fish for human document.forms[0].elements[13].select();consumption is rich in PUFA with high omega-3 fatty acid content. Docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) of all of the omega-3 fatty acids, are considered beneficial essential oils for humans with a wide range of health benefits. These include brain and neural development in infants, general wellbeing of adults and drug delivery through precursor molecules. They have become one of the most extensively studied organisms for industrial oil preparations as PUFA extraction from fish becomes less profitable. Many forms of these Thraustochytrid oils are being trialled for human consumption all over the world. In Australia, there has been little research performed on these organisms in the past ten years. A few Australian studies have been conducted in the form of comparative studies related to PUFA production within the related genera, but not focussed on their identification or cellular and genomic characterisation. Therefore, the main aim of this study was to investigate the morphological and genetic characteristics of Australian Thraustochytrids in order to aid in their identification and characterisation, as well as to better understand the effect of environmental conditions in the regulation of PUFA production. It was also noted that there was a knowledge gap in the preservation and total genomic DNA extraction of these organisms for the purposes of scientific research. The cryopreservation of these organisms for studies around the world follows existing generic methods. However, it is well understood that many of these generic methods attract not only high costs for chemicals, but also uses considerable storage space and other resources, all of which can be improved with new or modified approaches. In this context, a simple and inexpensive bead preservation method is described, without compromising the storage shelf life. We also describe, for the first time, the effects of culture age on the successful cryopreservation of Thraustochytrids. It was evident in the literature that DNA and RNA extractions for molecular and genetic studies of Thraustochytrids follow the classical phenol-chloroform extraction methods. It was also observed that modern protocols failed to avoid the use of phenol-chloroform rather than improving preparation and cell disruption. In order to provide a high quantity and quality DNA extraction, a modified protocol has been introduced that employs the use of modern commercial extraction kits and standard laboratory equipment. Thraustochytrids have been shown to be highly conserved in their 18S rDNA gene sequences, which is used as the current standard for identification. It was demonstrated that the 18S rDNA gene sequence limits the recognition of closely related genera or within the genera from each member. Therefore, it was proposed that another profile, such as a randomly amplified polymorphic DNA (RAPD) based profiling system, be tested for use in the characterisation of Thraustochytrids. The RAPD profiles were shown to provide a unique DNA fingerprint for each isolate and small variations in their genome were able to be detected. This method involved the use of a minimum number of standard arbitrary primers and with an increase in the number of different primers used, a very high discrimination between organisms could be achieved. However, the method was not suitable for taxonomic purposes because the results did not correlate with other taxonomic features such as morphology. Another knowledge gap was found with respect to Australian Thraustochytrid growth characteristics, in that these had not been recorded and published. In order to rectify this, a record of colony and microscopic features of 12 selected isolates was performed. The results of preliminary studies indicated that further microbiological and biochemical studies are needed for full characterisation of these organisms. This information is of great importance to bio-prospecting of new Thraustochytrids from Australian ecosystems and would allow for their accurate identification, and so permit the prediction of their PUFA capability by comparison with related genera/species. It was well recognized that environmental stress plays a role in the PUFA production and is mainly due to the reactive oxygen species as abiotic stress (Chiou et al., 2001; Okuyama et al., 2008; Shabala et al., 2009; Shabala et al., 2001). In this aspect, this study makes the first attempt towards better understanding of this phenomenon by way of the use of real-time PCR for the detection of environmental effects on the regulation of PUFA production. Three main environmental conditions including temperature, pH and oxygen availability were monitored as stress inducers. In summary, this study provides novel approaches for the preservation and handling of Thraustochytrids, their molecular biological features, taxonomy, characterisation and responses to environmental factors with respect to their oil production enzymes. The information produced from this study will prove to be vital for both industrial and scientific investigations in the future.

Profiling contextual factors which influence safety in heavy vehicle industries

A significant proportion of worker fatalities within Australia result from truck-related incidents. Truck drivers face a number of health and safety concerns. Safety culture, viewed here as the beliefs, attitudes and values shared by an organisation’s workers, which interact with their surrounding context to influence behaviour, may provide a valuable lens for exploring safety-related behaviours in heavy vehicle operations. To date no major research has examined safety culture within heavy vehicle industries. As safety culture provides a means to interpret experiences and generate behaviour, safety culture research should be conducted with an awareness of the context surrounding safety. The current research sought to examine previous health and safety research regarding heavy vehicle operations to profile contextual factors which influence health and safety. A review of 104 peer-reviewed papers was conducted. Findings of these papers were then thematically analysed. A number of behaviours and scenarios linked with crashes and non-crash injuries were identified, along with a selection of health outcomes. Contextual factors which were found to influence these outcomes were explored. These factors were found to originate from government departments, transport organisations, customers and the road and work environment. The identified factors may provide points of interaction, whereby culture may influence health and safety outcomes.

Factors affecting new project delays in Saudi Arabian manufacturing organisations

Delay in the delivery of manufacturing projects is a major problem in manufacturing industries. This research investigates the factors that influence the lead time of new projects in manufacturing organisations. Employing a questionnaire survey and interview methodologies, this study collected data from five leading manufacturing organisations as well as their suppliers and contractors in Saudi Arabia to examine what, how and why the new project implementation delay occurs. Results show that the main factors contributing to manufacturing delays are related to people and material. On the other hand, social, political and cultural factors were the least significant factors as per the outcome of this study. Views of manufacturers, suppliers and contractors regarding causes of delays have also been analysed.

Spatial analysis of risk factors for transmission of the Barmah forest virus in Queensland, Australia

Barmah Forest virus (BFV) disease is the second most common mosquito-borne disease in Australia but few data are available on the risk factors. We assessed the impact of spatial climatic, socioeconomic and ecological factors on the transmission of BFV disease in Queensland, Australia, using spatial regression. All our analyses indicate that spatial lag models provide a superior fit to the data compared to spatial error and ordinary least square models. The residuals of the spatial lag models were found to be uncorrelated, indicating that the models adequately account for spatial and temporal autocorrelation. Our results revealed that minimum temperature, distance from coast and low tide were negatively and rainfall was positively associated with BFV disease in coastal areas, whereas minimum temperature and high tide were negatively and rainfall was positively associated with BFV disease (all P-value.