Malicious code detection architecture inspired by human immune system

Malicious code is a threat to computer systems globally. In this paper, we outline the evolution of malicious code attacks. The threat is evolving, leaving challenges for attackers to improve attack techniques and for researchers and security specialists to improve detection accuracy. We present a novel architecture for an effective defense against malicious code attack, inspired by the human immune system. We introduce two phases of program execution: Adolescent and Mature Phase. The first phase uses a malware profile matching mechanism, whereas the second phase uses a program profile matching mechanism. Both mechanisms are analogous to the innate immune system

D-STATCOM control in distribution networks with composite loads to ensure grid code compatible performance of photovoltaic generators

This paper proposes an optimal linear quadratic Gaussian (LQG) controller for D-STATCOM to improve the dynamic performance of distribution networks with photovoltaic generators. The controller is designed based on the H∞ norm of the uncertain system. The change in system model due to the variation of load compositions in the composite load is considered as an uncertain term in the design algorithm. The performance of the designed controller is demonstrated on a widely used test system. Simulation results indicate that the proposed controller can be a potential solution for improving the voltage stability of distribution networks.

Storm water harvesting and reuse in Australia : enhanced sand filtration for the treatment of storm water

This study details the removal of common storm water pollutants along with heavy metals by enhanced sand filtration. Three filtration flow rates were trialled: 5, 10 and 20 m/h. The performance of each filter was rated on the ability to remove turbidity, suspended solids, dissolved solids, phosphorus, nitrogen, lead, copper and Zinc. Conventional sand filter was used as a performance benchmark, and compared with four sand filters that are enhanced with a nylon carpet fibre, polypropylene carpet fibre, Syrian carpet fibre-enhanced and alum sludge-enhanced sand filter. Carpet fibre-enhanced sand filtration was highly effective at filtering simulated storm water and in most cases performing well above the conventional sand filters. The carpet fibre-enhanced sand filters had no drop in flow rates over the 4 h filtration period with following removal rates: up to 90% total suspended solids, 70% zinc, 60% turbidity, 25% phosphorus, 15% nitrogen and 10% total dissolved solids. However, results showed that alum sludge-enhanced sand filter performed the highest, with removal rates up to 100% for total suspended solids, 80% zinc, 90% turbidity, up to 80% phosphorus, up to 40% nitrogen and 3% total dissolved solids. But the flow rates dropped approximately two-thirds of the original flow rates within the first hour. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Sturnus vulgaris, mitochondrial selection, MATLAB code and microsatellite data

Here we provide MATLAB code used to simulate drift and selection between and within individuals, which has been used to investigate mitochondrial haplotype frequency shifts in Sturnus vulgaris. Also provided is a microsatellite data set used to assess whether empirical allele frequency shifts were likely to be caused by admixture. These files support and upcoming publication, which concludes that within-individuals selection on mitochondrial DNA best explains empirical data.

CISR-ODE, A C plus plus framework with ODE solver for code based system dynamics simulation

Ordinary differential equations are used for modelling a wide range of dynamic systems. Even though there are many graphical software applications for this purpose, a fully customised solution for all problems is code-level programming of the model and solver. In this project, a free and open source C++ framework is designed to facilitate modelling in native code environment and fulfill the common simulation needs of control and many other engineering and science applications. The solvers of this project are obtained from ODEINT and specialised for Armadillo matrix library to provide an easy syntax and a fast execution. The solver code is minimised and its modification for users have become easier. There are several features added to the solvers such as controlling maximum step size, informing the solver about sudden input change and forcing custom times into the results and calling a custom method at these points. The comfort of the model designer, code readability, extendibility and model isolation have been considered in the structure of this framework. The application manages the output results, exporting and plotting them. Modifying the model has become more practical and a portion of corresponding codes are updated automatically. A set of libraries is provided for generation of output figures, matrix hashing, control system functions, profiling, etc. In this paper, an example of using this framework for a classical washout filter model is explained.

Defence against code injection attacks

Code injection attacks are considered serious threats to the Internet users. In this type of attack the attacker injects malicious codes in the user programs to change or divert the execution flows. In this paper we explore the contemporary defence strategies against code injection attacks (CIAs) and underline their limitations. To overcome these limitations, we suggest a number of countermeasure mechanisms for protecting from CIAs. Our key idea relies on the multiplexing technique to preserve the exact return code to ensure the integrity of program execution trace of shell code. This technique also maintains a FIFO (first in first out) queue to defeat the conflict state when multiple caller method makes a call simultaneously. Finally, our technique can provide better performance, in terms of protection and speed, in some point compared to the CFI (control flow integrity) as well as CPM (code pointer masking) techniques.

APSEE-Reuse : um meta-modelo para apoiar a reutilização de processos de software

Dentre as principais áreas que constituem a Ciência da Computação, uma das que mais influenciam o mundo atual é a Engenharia de Software, envolvida nos aspectos tecnológicos e gerenciais do processo de desenvolvimento de software. Software tornou-se a base de sustentação de inúmeras organizações dos mais diversos ramos de atuação espalhados pelo planeta, consistindo de um elemento estratégico na diferenciação de produtos e serviços atuais. Atualmente, o software está embutido em sistemas relacionados a infindável lista de diferentes ciências e tecnologias. A Tecnologia de Processo de Software surgiu em meados da década de 1980 e representou um importante passo em direção à melhoria da qualidade de software através de mecanismos que proporcionam o gerenciamento automatizado do desenvolvimento de software. Diversas teorias, conceitos, formalismos, metodologias e ferramentas surgiram nesse contexto, enfatizando a descrição formal do modelo de processo de software, para que possa ser automatizado por um ambiente integrado de desenvolvimento de software. Os modelos de processos de software descrevem o conhecimento de uma organização e, portanto, modelos que descrevem experiências bem sucedidas devem ser continuamente disseminados para reutilização em diferentes projetos. Apesar da importância desse tópico, atualmente apenas uma pequena porção do conhecimento produzido durante o desenvolvimento de software é mantido para ser reutilizado em novos projetos. Embora, à primeira vista, o desafio de descrever modelos reutilizáveis para processos de software pareça ser equivalente ao problema tratado pela tradicional área de reutilização de produtos software, isso é apenas parcialmente verdade, visto que os processos envolvem elementos relacionados com aspectos sociais, organizacionais, tecnológicos e ambientais. A crescente complexidade da atual modelagem de processos vem influenciando a investigação de tecnologias de reutilização que sejam viáveis nesse campo específico. A investigação conduzida nesse trabalho culminou na especificação de um meta-modelo que tem como objetivo principal aumentar o nível de automação fornecido na reutilização de processos, apoiando a modelagem de processos abstratos que possam ser reutilizados em diferentes contextos. O meta-modelo proposto por esse trabalho - denominado APSEE-Reuse - fornece uma série de construtores sintáticos que permitem que os diferentes aspectos desse contexto sejam descritos segundo múltiplas perspectivas, complementares entre si, contribuindo para diminuir a complexidade do modelo geral. A solução proposta destaca-se por fornecer um formalismo para modelagem de processos, o qual é integrado à uma infraestrutura de automação de processos de software, permitindo que a reutilização esteja intimamente relacionada com as outras etapas do ciclo de vida de processos. Os diferentes componentes envolvidos na definição do modelo APSEE-Reuse proposto foram especificados algebricamente, constituindo uma base semântica de alto 15 nível de abstração que deu origem a um conjunto de protótipos implementados no ambiente PROSOFT-Java. O texto ainda discute os experimentos realizados com o meta-modelo proposto na especificação de diferentes estudos de casos desenvolvidos a partir de exemplos retirados na literatura especializada, e de processos que fornecem soluções em contextos e necessidades específicas de projetos desenvolvidos no PPGC-UFRGS. Finalmente, são apresentadas considerações acerca dos trabalhos relacionados, os elementos críticos que influenciam a aplicabilidade do modelo e as atividades adicionais vislumbradas a partir do trabalho proposto.

Reuse-based test planning for core-based systems-on-chip

Electronic applications are currently developed under the reuse-based paradigm. This design methodology presents several advantages for the reduction of the design complexity, but brings new challenges for the test of the final circuit. The access to embedded cores, the integration of several test methods, and the optimization of the several cost factors are just a few of the several problems that need to be tackled during test planning. Within this context, this thesis proposes two test planning approaches that aim at reducing the test costs of a core-based system by means of hardware reuse and integration of the test planning into the design flow. The first approach considers systems whose cores are connected directly or through a functional bus. The test planning method consists of a comprehensive model that includes the definition of a multi-mode access mechanism inside the chip and a search algorithm for the exploration of the design space. The access mechanism model considers the reuse of functional connections as well as partial test buses, cores transparency, and other bypass modes. The test schedule is defined in conjunction with the access mechanism so that good trade-offs among the costs of pins, area, and test time can be sought. Furthermore, system power constraints are also considered. This expansion of concerns makes it possible an efficient, yet fine-grained search, in the huge design space of a reuse-based environment. Experimental results clearly show the variety of trade-offs that can be explored using the proposed model, and its effectiveness on optimizing the system test plan. Networks-on-chip are likely to become the main communication platform of systemson- chip. Thus, the second approach presented in this work proposes the reuse of the on-chip network for the test of the cores embedded into the systems that use this communication platform. A power-aware test scheduling algorithm aiming at exploiting the network characteristics to minimize the system test time is presented. The reuse strategy is evaluated considering a number of system configurations, such as different positions of the cores in the network, power consumption constraints and number of interfaces with the tester. Experimental results show that the parallelization capability of the network can be exploited to reduce the system test time, whereas area and pin overhead are strongly minimized. In this manuscript, the main problems of the test of core-based systems are firstly identified and the current solutions are discussed. The problems being tackled by this thesis are then listed and the test planning approaches are detailed. Both test planning techniques are validated for the recently released ITC’02 SoC Test Benchmarks, and further compared to other test planning methods of the literature. This comparison confirms the efficiency of the proposed methods.

RST: Reuse through Speculation on Traces

In this thesis, we present a novel approach to combine both reuse and prediction of dynamic sequences of instructions called Reuse through Speculation on Traces (RST). Our technique allows the dynamic identification of instruction traces that are redundant or predictable, and the reuse (speculative or not) of these traces. RST addresses the issue, present on Dynamic Trace Memoization (DTM), of traces not being reused because some of their inputs are not ready for the reuse test. These traces were measured to be 69% of all reusable traces in previous studies. One of the main advantages of RST over just combining a value prediction technique with an unrelated reuse technique is that RST does not require extra tables to store the values to be predicted. Applying reuse and value prediction in unrelated mechanisms but at the same time may require a prohibitive amount of storage in tables. In RST, the values are already stored in the Trace Memoization Table, and there is no extra cost in reading them if compared with a non-speculative trace reuse technique. . The input context of each trace (the input values of all instructions in the trace) already stores the values for the reuse test, which may also be used for prediction. Our main contributions include: (i) a speculative trace reuse framework that can be adapted to different processor architectures; (ii) specification of the modifications in a superscalar, superpipelined processor in order to implement our mechanism; (iii) study of implementation issues related to this architecture; (iv) study of the performance limits of our technique; (v) a performance study of a realistic, constrained implementation of RST; and (vi) simulation tools that can be used in other studies which represent a superscalar, superpipelined processor in detail. In a constrained architecture with realistic confidence, our RST technique is able to achieve average speedups (harmonic means) of 1.29 over the baseline architecture without reuse and 1.09 over a non-speculative trace reuse technique (DTM).

Reusing values in a dynamic conditional execution architecture

A Execução Condicional Dinâmica (DCE) é uma alternativa para redução dos custos relacionados a desvios previstos incorretamente. A idéia básica é buscar todos os fluxos produzidos por um desvio que obedecem algumas restrições relativas à complexidade e tamanho. Como conseqüência, um número menor de previsões é executado, e assim, um número mais baixo de desvios é incorretamente previsto. Contudo, tal como outras soluções multi-fluxo, o DCE requer uma estrutura de controle mais complexa. Na arquitetura DCE, é observado que várias réplicas da mesma instrução são despachadas para as unidades funcionais, bloqueando recursos que poderiam ser utilizados por outras instruções. Essas réplicas são geradas após o ponto de convergência dos diversos fluxos em execução e são necessárias para garantir a semântica correta entre instruções dependentes de dados. Além disso, o DCE continua produzindo réplicas até que o desvio que gerou os fluxos seja resolvido. Assim, uma seção completa do código pode ser replicado, reduzindo o desempenho. Uma alternativa natural para esse problema é reusar essas seções (ou traços) que são replicadas. O objetivo desse trabalho é analisar e avaliar a efetividade do reuso de valores na arquitetura DCE. Como será apresentado, o princípio do reuso, em diferentes granularidades, pode reduzir efetivamente o problema das réplicas e levar a aumentos de desempenho.

Dip financing of financially distressed companies in Brazil – the conditions provided by the brazilian bankruptcy law act as real incentives for dip lenders as in chapter 11 of the American bankruptcy code?

O objeto deste trabalho é a compreensão do financiamento de empresas em crise, mais especificamente, o financiamento concedido após o pedido de recuperação judicial, como forma de permitir que a empresa saia da situação de crise e retorne à condição de normalidade. Para tanto, nos apropriando do termo cunhado pela doutrina norte-americana, para fazer referência ao aporte de recursos em empresas em dificuldade, utilizaremos o termo DIP financing ou financiamento DIP. Para uma compreensão adequada do objeto, é necessário que entendamos a origem do DIP financing nos Estados Unidos e como é a regulação norte-americana sobre a matéria atualmente. O segundo passo será avaliar a possibilidade de aplicação da mesma estrutura de aporte de recursos no Brasil. Ao estudarmos a origem desse mecanismo nos Estados Unidos, veremos os problemas que surgiram ao longo dos anos e como foram superados jurisprudencialmente e doutrinariamente para que o financiamento DIP se consolidasse como uma das formas de aporte de capital em empresas em crise, culminando no desenvolvimento de uma verdadeira indústria de crédito às empresas em dificuldade. Uma análise dos problemas enfrentados pelo sistema falimentar americano nos levará a hipótese de que, a menos que sejam afirmados mecanismos que assegurem a quem concede o financiamento após o pedido de recuperação judicial, uma super prioridade no recebimento após a recuperação judicial, será possível o desenvolvimento de um mercado de DIP financing no Brasil.

Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials

Sugarcane bagasse ash (SCBA) is a residue resulting from the burning of bagasse in boilers in the sugarcane/alcohol industry. SCBA has a very high silica concentration and contains aluminum, iron, alkalis and alkaline earth oxides in smaller amounts. In this work, the properties of sintered ceramic bodies were evaluated based on the concentration of SCBA, which replaced non-plastic material. The ash was mixed (up to 60 wt%) with a clayed raw material that is used to produce roof tiles. Prismatic probes were pressed and sintered at different temperatures (up to 1200 degrees C). Technological tests of ceramic probes showed that the addition of ash has little influence on the ceramic properties up to 1000 C. X-ray diffraction and thermal analysis data showed that, above this temperature the ash participates in the sintering process and in the formation of new important phases. The results reported show that the reuse of SCBA in the ceramic industry is feasible. (C) 2011 Elsevier Ltd. All rights reserved.

Reuse of norgestomet implants in an eCG-based superovulation protocol administered to Nelore (Bos taurus indicus) cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microbiological and physicochemical treatments applied to metallurgic industry aiming water reuse

Estudou-se o reuso de água de um sistema composto por estação de tratamento de esgoto (ETE) com aeração prolongada e lodo ativado, e em uma estação compacta de tratamento de água (ECTA) de uma indústria metalúrgica. Os processos para obtenção da água de reuso foram: microbiológico e físico-químico. O esgoto doméstico foi bombeado para a ETE, onde houve formação de flocos biológicos e água clarificada. Avaliou-se a eficiência do processo microbiológico da ETE mediante a remoção de demanda bioquímica de oxigênio (DBO), demanda química de oxigênio (DQO) e sólidos sedimentáveis (SS). A eficiência do processo físico-químico de clarificação e desinfecção foi avaliada mediante análises de pH, turbidez, cor, contagem de bactérias heterotróficas aeróbias, cloro livre, dureza, alcalinidade, cloretos, sulfatos, sólidos totais dissolvidos (STD). Na água de reuso além desses parâmetros avaliou-se a toxicidade aguda ao microcrustáceo Daphnia similis.