Domain structure of hard magnetic NdAlFeCo bulk metallic glass

Magnetic domain structure of hard magnetic Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic force microscopy. In the magnetic force images it is shown that the exchange interaction type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. As the scale of the magnetic domain is much larger than the size of the short-range ordered atomic clusters existing in the BMG, it is believed that the large areas of magnetic contrast are actually a collection of a group of clusters aligned in parallel by strong exchange coupling interaction. After fully crystallization, the BMG exhibits paramagnetism. No obvious magnetic contrast is observed in the magnetic force images of fully crystallized samples, except for a small quantity of ferromagnetic crystalline phase with low coercivity and an average size of 900 nm.

Stability of ZrTiCuNiBe Bulk Metallic Glass Upon Isothermal Annealing Near the Glass Transition Temperature

The stability of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass (BMG) upon isothermal annealing near the glass transition temperature has been investigated by using x-ray diffraction, differential scanning calorimetry, and the pulse echo overlap method. The density, elastic constants, and thermodynamic parameters as well as their annealing time dependence have been determined. The microstructural and properties changes of the annealed BMG were checked by acoustic measurement. Obvious structural and property changes were observed with prolonged annealing of the BMG near the glass transition temperature.

Evaluación de dos grupos de cerdos alimentados con dos tipos de raciones, concentrado comercial y desperdicios de cocina

El presente trabajo se realizó en la granja "Santa Rosa" propiedad de la UNA, ubicada en Sabana Grande, Managua El objetivo general del estudio fue: evaluar comparativamente el concentrado comercial y los desperdicios de cocina, sobre los indicadores técnicos del cerdo en producción. Los objetivos específicos fueron: l. Evaluar el comportamiento de las variables ganancia media diaria, ganancia por periodo, peso inicial, peso final, consumo de alimento por animal y por periodo, conversión alimenticia por animal y por periodo de dos grupos de cerdos alimentados, uno con concentrado comercial y otro con desperdicios de cocina; 2. Comparar económicamente las dietas utilizadas. El experimento se analizó en tres etapas productivas (crecimiento, desarrollo y engorde) con dos grupos de cerdos alimentados con: Concentrado comercial (T1) y Desperdicios de cocina (T2). Se utilizaron 16 cerdos Híbridos divididos en dos grupos de 8 animales (4♀ y 4♂ castrados),con peso promedio de 27.5 kg., los animales se pesaron cada 30 días. Las variables evaluadas fueron: ganancia media diaria (GMD), ganancia media por periodo (GMPP), peso inicial, peso final, consumo animal (CA), consumo por periodo (CP), conversión de alimento por animal (Convan) y por periodo (convp). Las variables PI, PF, G.MD. y G.M.P.P. se analizaron como un BCA en arreglo bifactorial considerando los factores: A: Sexo y B: Dietas. Las variables CA, CP, Convan y ConvP se analizaron como un DCA. Se realizó el ANDEVA y pruebas de separaciones de medias para todas las variables. Para relacionar las variables peso inicial con el peso final, se realizó un análisis de regresión. Se realizó un análisis económico por presupuestos parciales. La variable GMD se vio afectada (0.05 %) por la interacción. sexo*dieta, no así por el tiempo, sexo y dieta La GMPP fue afectada (0.05%) dieta y no por el tiempo, sexo y la interacción. sexo*dieta. El peso inicial se vio afectado (0.05%) por el tiempo, la dieta y la interacción sexo*dieta, y no por el sexo. El peso final se vio afectado (0.05%) por el tiempo, sexo, dieta y la interacción sexo*dieta. La Convan, ConvP, CA y CP se observan diferencias significativa pan ambos tratamientos, observándose un mejor comportamiento con el T1. El peso final se ve afectado por el peso inicial en ambos tratamientos, con r2 de 0.99 y 0.97 respectivamente. El tratamiento que presentó mayor fue el T2. Se concluye que: Los desperdicios de cocina son una alternativa de alimentación no convencional viable para los productores; tanto T1 y T2 tuvieron estadísticamente igual comportamiento GMD y GMPP, no siendo así para el peso inicial y peso final que fueron mayores al el T1; El CA, CP, Convan y ConvP fueron inferiores al el T1.De igual forma en ambos tratamientos el peso final dependió del peso inicial en un 99 y 97% respectivamente. El tratamiento que mayor Utilidad Obtuvo fue el de desperdicios de cocina. Económicamente producir un kilogramo de carne de cerdo con desperdicios de cocina es más rentable que hacerlo a partir de alimentos concentrados.

Domain structure of a Nd60Al10Fe20Co10 bulk metallic glass

Magnetic domain structure of Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic-force microscopy. In the magnetic-force images it is shown that the exchange-interaction-type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. The existence of the large-scale domains demonstrates that the magnetic moments of a great deal of short-scale ordered atomic clusters in the BMG have been aligned by exchange coupling. Annealing at 715 K leads to partial crystallization of the BMG. However, the exchange coupling is stronger in the annealed sample, which is considered to arise from the increase of transition-metal concentration in the amorphous phase due to the precipitation of Nd crystalline phase.

El pensamiento filosófico-jurídico de Juan Alfredo Casaubón

Resumen: En el presente trabajo se estudia y analiza el pensamiento iusfilosófico de Juan Alfredo Casaubón, unos de los autores iusnaturalistas más significativo de la Argentina en el siglo XX. Heredero de la tradición clásica que conocerá en los famosos Cursos de Cultura Católica y, posteriormente, en la Pontificia Universidad Católica Santa María de los Buenos Aires, de la cual será uno de sus profesores fundadores. Abogado, docente, juez, investigador, padre y esposo. Su pensamiento, si bien se puede encuadrar en la Tradición Central de Occidente, tendrá diversas particularidades que le darán a su pensamiento una nueva impronta a la filosofía jurídica. Se ha tratado de sintetizar el pensamiento casaubiano en diez tesis principales que reflejan en su estricta medida todo el corpus de este filósofo argentino. Previo al desarrollo iusfilosófico del autor, se ha tratado de encuadrar su posición filosófica general y, luego, jurídica, a través de su concepción iusnaturalista. Por último, se hará un pequeño homenaje a este gran pensador en el marco de la filosofía argentina del siglo XX.

Glass Transition and Thermal Stability of Hard Magnetic Bulk NdAlFeCo Metallic Glass

Glass transition and thermal stability of bulk Nd60Al10Fe20Co10 metallic glass were investigated by means of dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The glass transition temperature, not revealed by DSC, is alternatively determined by DMTA via storage modulus E' and loss modulus E" measurement to be 498 K at a heating rate of 0.167 K s (-1). The calculated reduced glass transition temperature (T-g/T-m) is 0.63. The large value of T-g/T-m of this alloy is consistent with its good glass-forming ability. The crystallization process of the metallic glass is concluded as follows: amorphous --> amorphous + metastable FeNdAl phase --> amorphous + primary delta-FeNdAl phase --> primary delta-phase + eutectic delta-phase + Nd3Al + Nd3Co. The appearance of hard magnetism in this alloy is ascribed to the presence of amorphous phase with highly relaxed structure. The hard magnetism disappeared after the eutectic crystallization of the amorphous phase. (C) 2002 Elsevier Science B.V. All rights reserved.

Un testigo directo de las tensiones religiosas en la Alejandría de los siglos IV y V D.C. : Páladas de Alejandría en la Antología Palatina

Abstract: Although he is the most prolific writer of the Greek Anthology, Palladas’ life is almost unknown. But, in spite of the limited biographical data, his work has fortunately been preserved in the GA. Because of his literary creation, the old times rewarded him with the nickname Μετέωρος, high, since the literary merits of a hundred poems of his authorship was recognized (others are discussed by critics). A dozen of them contains invaluable information about the political, religious and social situation in Alexandria immediately after the victory of the bishop Theophilus, Cyril’s predecessor and uncle, during the conflict between Christians and Gentiles, each sector backed up by an Alexandrian population segment (cfr. 9.528, 10.82, 10.85) . Resigned at times, constantly demanding, Palladas complains about the decline of the belief professed by him due to the increasing penetration of the new faith. Therefore, four epigrams record the conversion of the temple of Tyche into a tavern (9.180-183) and 10.90 seems to attack the doctrine of the Resurrection. When religion and politics go hand-in-hand, when religious conspiracies link up with palace intrigues, consequences are predictable: a man called Doroteo denounced him for his negative response to the new dogma, which caused him the loss of his teacher paid work. His annoyance was even greater with further sufferings, chiefly economic, and he had to sell his books (9.171 and 9.175) among other desperate decisions Forewarned about his radical bitterness against Church, it is just to make clear that he is not fully acquiescent with ancient gods and heroes. Thus, in 5.257 he questions Zeus’ ars amandi, in 9.377 refutes Tantalus’ possibility of thirst and hunger in Hades and 9.773 mischievously points out that Eros has been changed into a pan. The work begins with the selection, personal translation and comprehensive analysis of twenty two epigrams. Through such philological aid, we attempt to verify the frictions and the main perceptible factors in his poetic creation to justify his worldview, according to the pagan sentiment widespread in that time before the twilight already overwhelming of its ailing traditions

Adiabatic compression of plasma with purely toroidal rotation

A variational method is developed to find approximate solutions to the generalized Grad-Shafranov equations for an adiabatic compression of the plasma with toroidal rotation, via the expansion in Fourier series in poloidal angle of the flux surface coordinates. The numerical results, which are carried out by the present method and by the usual two-dimensional method for a static equilibrium state, agree well.

Variational method for adiabatic compression of plasma with poloidal and toroidal rotation

A variational method is developed for adiabatic compression of plasma with both poloidal and toroidal rotation.

Comparative Observation of DC Arc Plasma Jets and Their Arc Root Behaviors at Reduced Pressure

Experimentally observed, results are presented for the DCarcplasmajets and theirarc-rootbehaviors generated atreduced gas pressure and without or with an' applied magnetic field. Pure argon, argon -hydrogen or argon-nitrogen mixture is used as the plasma-forming gas. A specially designed copper mirror is constructed and used for better observing the arc-root behavior on the anode surface of the DC non-transferred arcplasma torch. It is shown that for the cases without applied magnetic field, the laminar plasmajets are stable and approximately axisymmetrical. The arc-root attachment on the anode surface is completely diffusive when argon is used as the plasma-forming gas, while the arc-root attachment often becomes constrictive when hydrogen or nitrogen is added into the argon. When an external magnetic field is applied, the arcroot tends to rotate along the anode surface of the non-transferred arcplasma torch.

Characteristics of Laminar and Turbulent Argon Plasma Jets Impinging Normally Upon a Workpiece in Ambient Air

Modeling results are presented concerning the characteristicsoflaminar and turbulentargonplasmajetsimpingingnormally upon a flat plate (workpiece) in ambient air. It is found that the presence of the flat plate significantly enhances the entrainment rate of ambient air into the jets and affects on the flow and temperature fields in the near-plate region of the jets. At comparatively large distances between the plate and the jet inlet, the axial gradients of the plasma parameters in the laminarplasmaimpinging-jets assume values much less than those in the turbulentplasmaimpinging-jets.

Modeling of a Laminar DC Arc Plasma Torch

In recent years, stable and long laminarplasma jets have been successfully generated, and thus it is possible to achieve low-noise working surroundings, better process repeatability and controllability, and reduced metal-oxidation degree in plasma materials processing. With such a recent development in thermal plasma science and technology as the main research background, modeling studies are performed concerning the DCarcplasmatorch for generating the long laminar argon plasma jet. Two different two-dimensional modeling approaches are employed to deal with the arc-root attachment at the anode surface. The first approach is based on circumferentially uniform arc-root attachment, while the second uses the so-called fictitious anode method. Modeling results show that the highest temperature and maximum axial-velocity at the plasmatorch exit are ～15000 K and ～1100 m/s, respectively, for the case with arc current of 160 A and argon flow rate of 1.95×10{sup}(-4)kg/s.

Remark on Laser Bending Mechanisms

Laser bending mechanism is remarked, and its essence is the temperature gradient mechanism. The reverse bending and the thickened mechanisms are included in the temperature gradient mechanism because they are only different phenomena based on different thickness of the material. Experimental result shows that there is a kind of un-convention temperature distribution in the limit thickness specimen under laser irradiation. This phenomenon cannot be explained by the classical Fourier Law and is defined as Pan-Fourier effect in order to explain laser bending mechanism further.