Accidental release of hazardous gases: modelling and assessing risk

The renewed concern in assessing risks and consequences from technological hazards in industrial and urban areas continues emphasizing the development of local-scale consequence analysis (CA) modelling tools able to predict shortterm pollution episodes and exposure effects on humans and the environment in case of accident with hazardous gases (hazmat). In this context, the main objective of this thesis is the development and validation of the EFfects of Released Hazardous gAses (EFRHA) model. This modelling tool is designed to simulate the outflow and atmospheric dispersion of heavy and passive hazmat gases in complex and build-up areas, and to estimate the exposure consequences of short-term pollution episodes in accordance to regulatory/safety threshold limits. Five main modules comprising up-to-date methods constitute the model: meteorological, terrain, source term, dispersion, and effects modules. Different initial physical states accident scenarios can be examined. Considered the main core of the developed tool, the dispersion module comprises a shallow layer modelling approach capable to account the main influence of obstacles during the hazmat gas dispersion phenomena. Model validation includes qualitative and quantitative analyses of main outputs by the comparison of modelled results against measurements and/or modelled databases. The preliminary analysis of meteorological and source term modules against modelled outputs from extensively validated models shows the consistent description of ambient conditions and the variation of the hazmat gas release. Dispersion is compared against measurements observations in obstructed and unobstructed areas for different release and dispersion scenarios. From the performance validation exercise, acceptable agreement was obtained, showing the reasonable numerical representation of measured features. In general, quality metrics are within or close to the acceptance limits recommended for ‘non-CFD models’, demonstrating its capability to reasonably predict hazmat gases accidental release and atmospheric dispersion in industrial and urban areas. EFRHA model was also applied to a particular case study, the Estarreja Chemical Complex (ECC), for a set of accidental release scenarios within a CA scope. The results show the magnitude of potential effects on the surrounding populated area and influence of the type of accident and the environment on the main outputs. Overall the present thesis shows that EFRHA model can be used as a straightforward tool to support CA studies in the scope of training and planning, but also, to support decision and emergency response in case of hazmat gases accidental release in industrial and built-up areas.

Micro/nanoreservoirs for controlled release of active species in smart functional coatings

This work reports one possible way to develop new functional coatings used to increase the life time of metallic structures. The functionalities selected and attributed to model coatings in the frame of this work were corrosion protection, self-sensing and prevention of fouling (antifouling). The way used to confer those functionalities to coatings was based on the encapsulation of active compounds (corrosion inhibitors, pH indicators and biocides) in micro and nanocontainers followed by their incorporation into the coating matrices. To confer active corrosion protection, one corrosion inhibitor (2-mercaptobenzothiazole, MBT) was encapsulated in two different containers, firstly in silica nanocapsules (SiNC) and in polyurea microcapsules (PU-MC). The incorporation of both containers in different models coatings shows a significant improvement in the corrosion protection of aluminum alloy 2024 (AA2024). Following the same approach, SiNC and PU-MC were also used for the encapsulation of phenolphthalein (one well known pH indicator) to introduce sensing properties in polymeric coatings. SiNC and PU-MC containing phenolphthalein acted as corrosion sensor, showing a pink coloration due to the beginning of cathodic reaction, resulting in a pH increase identified by those capsules. Their sensing performance was proved in suspension and when integrated in coatings for aluminium alloy 2024 and magnesium alloy AZ31. In a similar way, the biocide activity (antifouling) was assigned to two polymeric matrices using SiNC for encapsulation of one biocide (Dichloro-2-octyl-2H-isothiazol-3-one, DCOIT) and also SiNC-MBT was tested as biocide. The antifouling activity of those two encapsulated compounds was assessed through inhibition and consequent decrease in the bioluminescence of modified E. coli. That effect was verified in suspension and when incorporated in coatings for AISI 1008 carbon steel. The developed micro and nanocontainers presented the desired performance, allowing the introduction of new functionalities to model coatings, showing potential to be used as functional additives in the next generation of multifunctional coatings.

Recreational shore fishing in southern Portugal: biological and socio-economic aspects and perspectives for management

Although overfishing is a concern for many fish stocks, it was for a long time only associated with commercial fishing exploitation, with less or no attention being given to the recreational fisheries. Recent research has shown however that the impact of recreational fishing on particular species can be considerable, and that the recreational harvest needs to be taken into account if fisheries are to be accurately assessed and effectively managed. In Portugal, the first recreational fishing regulations were only recently implemented. However, mirroring other European countries, regulations lacked scientific support, and specific knowledge of the activity was limited to a few studies with limited coverage. This thesis aimed to characterize the biological and socioeconomic aspects of the recreational shore angling activity in southern Portugal, to investigate whether the regulations in place were adequate and effective, and to provide recommendations for improved management and conservation of the inshore fisheries resources. A combined aerial-roving survey was conducted to gather data on fishing effort, catch, fishing trips and socioeconomic aspects (including anglers’ perceptions of regulations) of the recreational angling activity. The analysis of anglers’ catches suggested that compliance with daily bag limits was high, with less than 0.5% of creels exceeding the 10 kg angler-1 day-1 bag limit. Overall, 11.5% of the retained fishes were undersized, but non-compliance with minimum size limits was found to be high for some species (e.g. seabass, 73% undersized). In terms of the impact of recreational shore angling, the total estimated catches corresponded to less than 1% of the commercial landings for the same period (shared species). However, shore angling catches for white sea bream (Diplodus sargus) were found to be considerable, corresponding to 65% of the commercial landings (39.4% of total catch). In terms of anglers’ perceptions about the recreational fishing regulations in Portugal, the present study has shown that the majority of anglers accepted the existence of some kind of SRF regulations, but in general there was a partial or total disagreement with the recreational fishing restrictions recently put in place. Most anglers perceived themselves as not being involved in the decision-making process and claimed that some restrictions lacked a meaningful rationale (e.g. prohibition of fishing from piers/jetties). Fishers’ awareness with regard to specific aspects of the restrictions (such as the rationale for minimum size limits) was found to be very limited. During the same period, catches from sport fishing competitions were examined to test for differences with the recreational activity in terms of catches, and evaluate long term trends in catch and mean size of fish. Catches of the sport fishing competitions were found to be different from those observed for recreational fishing, being dominated by different species (e.g. garfish, mullets), and suggesting different fishing strategies of the the two types of anglers. High percentages of undersized fish were observed to be captured (and retained) during the competitions (in particular seabass, with 100% undersized), probably as a result of a single allowable minimum size (AMS) of 15 cm for all species in use in competitions. Lastly, catch and release fishing experiments were carried out to assess post-release mortality of three recreationally important species: two banded sea bream Diplodus vulgaris; black sea bream Spondyliosoma cantharus; and gilthead sea bream Sparus aurata. Post-release mortalities were found to be low (0-12%). The main predictor of mortality for Sparus aurata was anatomical hooking location, with 63% of the fishes that died being deeply hooked. The results support the release of fish, either from mandatory (e.g. minimum landing sizes) or voluntary practices. In summary, this thesis has demonstrated that the impact of recreational fishing for particular species is significant and needs to be taken into account for more effective management and stock assessment purposes. It has also highlighted several management issues that should be addressed in order to promote more adequate regulations in the future and prevent noncompliance issues. A periodic monitoring of the recreational fishing activity including all fishing modes (i.e. spear fishing, boat, and shore angling) would also be beneficial to ensure a timely knowledge on the global recreational fishing activity and support future management actions.

TAG & RELEASE Volume 19, No. 1 March 2014

Tag & Release is the newsletter for the South Carolina Governor's Cup Billfishing Series, an official program of the South Carolina Department of Natural Resources in cooperation with the South Carolina Department of Parks, Recreation and Tourism and the Harry R.E. Hampton Memorial Wildlife Fund.

TAG & RELEASE Volume 19, No. 2 May 2014

Tag & Release is the newsletter for the South Carolina Governor's Cup Billfishing Series, an official program of the South Carolina Department of Natural Resources in cooperation with the South Carolina Department of Parks, Recreation and Tourism and the Harry R.E. Hampton Memorial Wildlife Fund.

TAG & RELEASE Volume 20, No. 1 March 2015

Tag & Release is the newsletter for the South Carolina Governor's Cup Billfishing Series, an official program of the South Carolina Department of Natural Resources in cooperation with the South Carolina Department of Parks, Recreation and Tourism and the Harry R.E. Hampton Memorial Wildlife Fund.

TAG & RELEASE Volume 19, No. 4 Nov. 2014

Tag & Release is the newsletter for the South Carolina Governor's Cup Billfishing Series, an official program of the South Carolina Department of Natural Resources in cooperation with the South Carolina Department of Parks, Recreation and Tourism and the Harry R.E. Hampton Memorial Wildlife Fund.

Release of Bet v 1 from Birch Pollen 1 from 5 European 2 Countries. Results from the HIALINE Study

Exposure to allergens is pivotal in determining sensitization and allergic symptoms in individuals. Pollen grain counts in ambient air have traditionally been assessed to estimate airborne allergen exposure. However, the exact allergen content of ambient air is unknown. We therefore monitored atmospheric concentrations of birch pollen grain and the matched major birch pollen allergen Bet v 1 simultaneously across Europe within the EU-funded project HIALINE (Health Impacts of Airborne Allergen Information Network). Pollen count was assessed with Hirst type pollen traps at 10 l/min at sites in France, United Kingdom, Germany, Italy and Finland. Allergen concentrations in ambient air were sampled at 800l/min with a Chemvol high-volume cascade impactor equipped with stages PM>10μm, 10 μm>PM>2.5μm, and in Germany also 2.5 μm>PM>0.12μm. The major birch pollen allergen Bet v 1 was determined with an allergen specific ELISA. Bet v 1 isoform patterns were analyzed by 2D-SDS-PAGE blots and mass spectrometric identification. Basophil activation was tested in an FcεR1-humanized rat basophil cell line passively sensitized with serum of a birch pollen lmptomatic patient. Compared to 10 previous years, 2009 was a representative birch pollen season for all stations. About 90% of the allergen was found in the PM>10μm fraction at all stations. Bet v 1 isoforms pattern did not varied substantially neither during ripening of pollen nor between different geographical locations. The average European allergen release from birch pollen was 3.2 pg Bet v 1/pollen and did not vary much between the European countries. However, in all countries a >10-fold difference in daily allergen release per pollen was measured which could be explained by long range transport of pollen with a deviating allergen release. Basophil activation by ambient air extracts correlated better with airborne allergen than with pollen concentration. Although Bet v 1 is a mixture of different isoforms, its fingerprint is constant across Europe. Bet v 1 was also exclusively linked to pollen. Pollen from different days varied >10-fold in allergen release. Thus exposure to allergen is inaccurately monitored by only monitoring birch pollen grains. Indeed, a humanized basophil activation test correlated much better with allergen concentrations in ambient air than with pollen count. Monitoring the allergens themselves together with pollen in ambient air might be an improvement in allergen exposure assessment.

Pollen Season and Climate: Is the Timing of Birch Pollen Release in the UK Approaching its Limit?

In light of heightened interest in the response of pollen phenology to temperature, we investigated recent changes to the onset of Betula (birch) pollen seasons in central and southern England, including a test of predicted advancement of the Betula pollen season for London. We calculated onset of birch pollen seasons using daily airborne pollen data obtained at London, Plymouth and Worcester, determined trends in the start of the pollen season and compared timing of the birch pollen season with observed temperature patterns for the period 1995–2010. We found no overall change in the onset of birch pollen in the study period although there was evidence that the response to temperature was nonlinear and that a lower asymptotic start of the pollen season may exist. The start of the birch pollen season was strongly correlated with March mean temperature. These results reinforce previous findings showing that the timing of the birch pollen season in the UK is particularly sensitive to spring temperatures. The climate relationship shown here persists over both longer decadal-scale trends and shorter, seasonal trends as well as during periods of ‘sign-switching’ when cooler spring temperatures result in later start dates. These attributes, combined with the wide geographical coverage of airborne pollen monitoring sites, some with records extending back several decades, provide a powerful tool for the detection of climate change impacts, although local site factors and the requirement for winter chilling may be confounding factors.

Antifungal nanofibers made by controlled release of sea animal derived peptide

© The Royal Society of Chemistry 2015

Pulsed extremely low-frequency magnetic fields stimulate microvesicle release from human monocytic leukaemia cells

Microvesicles are released from cell surfaces constitutively during early apoptosis or upon activation with various stimuli including sublytic membrane attack complex (MAC). This study shows that an alternating current, pulsed, extremely low-frequency electromagnetic field (0.3 μT at 10 Hz, 6 V AC) induced transient plasma membrane damage that allowed calcium influx. This in turn caused a release of stimulated microvesicles (sMV). When extracellular calcium was chelated with EGTA, sMV biogenesis initiated by ELFMF was markedly reduced and the reduction was less than when the stimulation was the deposition of sublytic MAC. This suggested that pulsed ELFMF resulted in transcellular membrane pores causing organelles to leak additional calcium into the cytoplasm (which EGTA would not chelate) which itself can lead to sMV release.

Heparinized nanohydroxyapatite/collagen granules for controlled release of vancomycin

The purpose of this study was to develop a bone substitute material capable of preventing or treating osteomyelitis through a sustainable release of vancomycin and simultaneously inducing bone regeneration. Porous heparinized nanohydroxyapatite (nanoHA)/collagen granules were characterized using scanning electron microscopy, micro-computed tomography and attenuated total reflectance Fourier transform infrared spectroscopy. After vancomycin adsorption onto the granules, its releasing profile was studied by UV molecular absorption spectroscopy. The heparinized granules presented a more sustainable release over time, in comparison with nonheparinized nanoHA and nanoHA/collagen granules. Vancomycin was released for 360 h and proved to be bioactive until 216 h. Staphylococcus aureus adhesion was higher on granules containing collagen, guiding the bacteria to the material with antibiotic, improving their eradication. Moreover, cytotoxicity of the released vancomycin was assessed using osteoblast cultures, and after 14 days of culture in the presence of vancomycin, cells were able to remain viable, increasing their metabolic activity and colonizing the granules, as observed by scanning electron microscopy and confocal laser scanning microscopy. These findings suggest that heparinized nanoHA/collagen granules are a promising material to improve the treatment of osteomyelitis, as they are capable of releasing vancomycin, eliminating the bacteria, and presented morphological and chemical characteristics to induce bone regeneration.

Da assessoria ao jornalismo : análise do processo de produção de press release na era digital em Portugal

A presente dissertação pretende fazer a análise do processo de produção do press release na assessoria em Portugal, a eficácia dessa ferramenta de comunicação junto dos jornalistas e, por inerência, a evolução da figura do assessor enquanto profissional reconhecido junto da comunidade jornalística. São também objetivos, compreender a relevância de um press release, perceber se gera efeito, analisar a possível forma de melhorar esta ferramenta e, ainda, perceber se esta ferramenta sofreu algum tipo de adaptação à era digital. A investigação inicia-se com a incursão pelos contextos e história das áreas profissionais em estudo, a assessoria de comunicação em agências e o jornalismo em Portugal, no quadro da crise económica e financeira de 2008 a 2013. O enfoque deste estudo será o procedimento e a eficácia de um press release, no período considerado. A pós-produção desta ferramenta implica o contacto entre dois interlocutores, os profissionais de assessoria e os profissionais do jornalismo. Finda esta investigação com análise baseada em seis entrevistas semiestruturadas, divididas em categorias profissionais e setores de atividade: jornalistas, assessores, assessores ex-jornalistas, nas áreas de saúde e consumo. Deste estudo resulta que o press release, privilegiando-se a sua estrutura e conteúdo, é, como foi, uma ferramenta fundamental muitas vezes, e nos dias de hoje, no auxílio às negociações one to one.

Projecto de criação de metodologia de análise da Usabilidade para selecção de plataforma SaaS de Gestão de Projectos online CATCH, Global Marketing

O aparecimento de soluções de software baseadas na Cloud vieram democratizar o acesso a aplicações de suporte à actividade empresarial, permitindo a micro e pequenas empresas aceder a ferramentas que outrora apenas as grandes empresas poderiam financiar, dada a introdução de novas formas de pagamento mensais com base em contratos flexíveis, acesso via internet e ausência de instalação de hardware específico ou compra de licenças por utilizador – a verdadeira utilização de software como um serviço, vulgo SaaS (Software as a Service). As aplicações de tipo SaaS aportam inúmeros benefícios para as empresas e mesmo vantagens competitivas importantes, estando disponíveis soluções em diversas áreas, nomeadamente para a Gestão de Projectos, como ferramentas de CRM (Customer Relationship Management) e CMS (Content Management System), entre outros. Assim, as empresas de Marketing e Comunicação, caso da empresa em que se centra este Projecto, têm hoje em dia acesso a um conjunto de aplicações SaaS, que pelo seu custo acessível e fácil acesso online, permitem às empresas mais pequenas serem rapidamente tão competitivas quanto as maiores, por norma com processos mais pesados e tradicionais. Adicionalmente, assistimos também ao fenómeno da consumerização das TI, em que os consumidores passam a querer ter o mesmo tipo de User Experience (UX) de que usufruem na utilização de aplicações fora do seu trabalho, aplicadas à vida empresarial. Este Projecto argumenta que a Usabilidade deve ser um dos elementos chave para a selecção correcta de uma aplicação online de Gestão de Projectos (do tipo SaaS), algo que deveria ser facilitado pela aplicação de uma metodologia de teste da Usabilidade, disponível numa plataforma online de acesso livre. A metodologia deverá ser eficaz e passível de ser utilizada por colaboradores de uma micro ou pequena empresa, apoiando o seu processo decisório de investimento, sendo eles especialistas ou não na matéria. A metodologia proposta neste projecto exploratório pressupõe uma complementaridade entre a avaliação Heurística de Usabilidade pelo método de Nielsen e o Método de Purdue - Purdue Usability Testing Questionnaire (PUTQ).