999 resultados para Capacitação de espermatozóide
Resumo:
This objective of this work was to investigate the enviromental perception of technician of clinical laboratories, in the city of the Natal/RN, focusing the generated environmental aspects and impacts in the activities, the strategical importance of the environmental management for the activity, as well as the knowledge about environmental norms and resolutions applied to the sector. A type survey exploratory and descriptive was carried through, using a questionnaire applied in 82 clinical laboratory, getting a return tax of 53,65%, or either, 44 laboratories. The results of the descriptive analyses point with respect to environmental conscience of the interviewed, therefore the majority (75%) described the activities of clinical analyses as great imapact on the environment. Although the interviewed present certain knowledge on the advantages of practical of envivonmental protection and the risks that the activities of clinical analyses offer, some important practical of environmental protection arer not develped by the majority of the iterviewed. The carried through statistical analyses had allowed to investigate the level of environmental knowledge of the professionals of the sector, being consisted themselves that they present little knowledge on practical ISO 14001 and of environmental protection in the health public sector. It can be conclude that, a program of environmental qualification for the sector becomes necessary, in order to improve the knowledge of the professionals of the area, and that the majority of the professionals would have a good recptivity therefore recognize the benefits of the practicadl of environmental protection for the competitiveness of the clinical analyses laboratories
Resumo:
The method of artificial lift of progressing cavity pump is very efficient in the production of oils with high viscosity and oils that carry a great amount of sand. This characteristic converted this lift method into the second most useful one in oil fields production. As it grows the number of its applications it also increases the necessity to dominate its work in a way to define it the best operational set point. To contribute to the knowledge of the operational method of artificial lift of progressing cavity pump, this work intends to develop a computational simulator for oil wells equipped with an artificial lift system. The computational simulator of the system will be able to represent its dynamic behavior when submitted to the various operational conditions. The system was divided into five subsystems: induction motor, multiphase flows into production tubing, rod string, progressing cavity pump and annular tubing-casing. The modeling and simulation of each subsystem permitted to evaluate the dynamic characteristics that defined the criteria connections. With the connections of the subsystems it was possible to obtain the dynamic characteristics of the most important arrays belonging to the system, such as: pressure discharge, pressure intake, pumping rate, rod string rotation and torque applied to polish string. The shown results added to a friendly graphical interface converted the PCP simulator in a great potential tool with a didactic characteristic in serving the technical capability for the system operators and also permitting the production engineering to achieve a more detail analysis of the dynamic operational oil wells equipped with the progressing cavity pump
Resumo:
This work consists of the creation of a Specialist System which utilizes production rules to detect inadequacies in the command circuits of an operation system and commands of electric engines known as Direct Start. Jointly, three other modules are developed: one for the simulation of the commands diagram, one for the simulation of faults and another one for the correction of defects in the diagram, with the objective of making it possible to train the professionals aiming a better qualification for the operation and maintenance. The development is carried through in such a way that the structure of the task allows the extending of the system and a succeeding promotion of other bigger and more complex typical systems. The computational environment LabView is employed to enable the system
Resumo:
This work proposes a computer simulator for sucker rod pumped vertical wells. The simulator is able to represent the dynamic behavior of the systems and the computation of several important parameters, allowing the easy visualization of several pertinent phenomena. The use of the simulator allows the execution of several tests at lower costs and shorter times, than real wells experiments. The simulation uses a model based on the dynamic behavior of the rod string. This dynamic model is represented by a second order partial differencial equation. Through this model, several common field situations can be verified. Moreover, the simulation includes 3D animations, facilitating the physical understanding of the process, due to a better visual interpretation of the phenomena. Another important characteristic is the emulation of the main sensors used in sucker rod pumping automation. The emulation of the sensors is implemented through a microcontrolled interface between the simulator and the industrial controllers. By means of this interface, the controllers interpret the simulator as a real well. A "fault module" was included in the simulator. This module incorporates the six more important faults found in sucker rod pumping. Therefore, the analysis and verification of these problems through the simulator, allows the user to identify such situations that otherwise could be observed only in the field. The simulation of these faults receives a different treatment due to the different boundary conditions imposed to the numeric solution of the problem. Possible applications of the simulator are: the design and analysis of wells, training of technicians and engineers, execution of tests in controllers and supervisory systems, and validation of control algorithms
Resumo:
This paper presents methodology based on Lev Vigotsky`s social interactionist theory through investigative activities, which integrates the teaching of physics to robotics, directed to students of the Physics degree course, seeking to provide further training for future teachers. The method is organized through educational robotics workshops that addresses concepts of physics through the use of low-cost educational robots along with several activities. The methodology has been presented and discussed and put into practice afterwards in workshops so that these future teachers may be able to take robotics to their classroom. Students from the last and penultimate semester of the Physics degree course of the Federal Institute of Education, Science and Technology of Rio Grande do Norte, Caicó campus participated in this project
Resumo:
Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery
Resumo:
Este artigo avalia os resultados do processo de reestruturação da indústria brasileira de máquinas têxteis, originado pelas reformas econômicas liberalizantes iniciadas no final dos anos 1980 e início dos 1990 e pelas medidas macroeconômicas que deram sustentação ao Plano Real, a partir de julho de 1994. Inicialmente, fazemos uma avaliação teórica das fontes do conhecimento e das formas de capacitação tecnológica nessa indústria. A seguir, expomos brevemente as principais características da indústria de máquinas têxteis em âmbito global. Posteriormente, direcionando a discussão para o caso brasileiro, apresentamos as especificidades da indústria têxtil, usuária daqueles bens, e do próprio setor de máquinas nacional. Através dos fluxos de comércio exterior do Brasil entre 1990 e 2004 e da variação do valor médio (US$ FOB/KG) desses fluxos, o artigo examina as mudanças estruturais, tecnológicas e, por conseguinte, na competitividade, que culminaram na transformação da indústria brasileira de máquinas têxteis, em termos de dimensão (escala) e escopo, e em uma nova inserção internacional, agora mais especializada e subordinada.
Resumo:
This study aims to include topics related to Space Science in elementary education from an experiment that aims to rescue the science teachers in public schools of São Tomé, RN, a taste for experimentation and exploration of advanced technologies. During this research with teachers found that they knew enough about the subject, but this knowledge was restricted to the events disclosed by the media. Regarding scientific knowledge, that same surface, they had many conceptual difficulties which hindered the approach of these topics in their classes. To overcome this difficulty, a workshop was held where teachers had the opportunity to discuss the historical aspect of Space Science, some physical concepts related to it, and the conduct of experiments with PET bottle rockets that recover from the curiosity typical of how the science. The results were outlined in the form of Planning Didactic built by teachers and using themes related to space science, from there, discussing content already provided in the composition of the schools curriculum. Therefore, this work allowed the teachers a minimum training required for them to not only reproduce, but readjusted and build, from this, their own paths in the classroom at the fundamental level
Resumo:
Recent research has revealed that the majority of Biology teachers believe the practice of experimental activities as a didactical means would be the solution for the improvement of the Biology teaching-learning process. There are, however, studies which signal the lack of efficiency in such practice lessons as far as building scientific knowledge is concerned. It is also said that despite the enthusiasm on the teachers‟ part, such classes are rarely taught in high school. Several studies point pedagogical difficulties as well as nonexistence of a minimal infrastructure needed in laboratories as cause of low frequency in experimental activities. The poor teacher performance in terms of planning and development of classes; the large number of students per class; lack of financial stimulus for teachers are other reasons to be taken into account among others, in which can also be included difficulties of epistemological nature. That means an unfavorable eye of the teacher towards experimental activities. Our study aimed to clarify if such scenario is generalized in high schools throughout the state of Rio Grande do Norte Brazil. During our investigation a sample of twenty teaching institutions were used. They were divided in two groups: in the first group, five IFRN- Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte schools. Two of those in Natal, and the other three from the country side. The second group is represented by fifteen state schools belonging to the Natal metropolitan area. The objectives of the research were to label schools concerning laboratory facilities; to identify difficulties pointed by teachers when performing experiment classes, and to become familiar with the conceptions of the teachers in regarding biology experiment classes. To perform such task, a questionnaire was used as instrument of data collecting. It contained multiple choice, essay questions and a semi-structured interview with the assistance of a voice recorder. The data analysis and the in loco observation allowed the conclusion that the federal schools do present better facilities for the practice of experimental activities when compared to state schools. Another aspect pointed is the fact that teachers of federal schools have more time available for planning the experiments; they are also better paid and are given access a career development, which leads to better salaries. All those advantages however, do not show a significantly higher frequency regarding the development of experiments when compared to state school teachers. Both teachers of federal and state schools pointed infra-structure problems such as the availability of reactants, equipments and consumption supplies as main obstacle to the practice of experiments in biology classes. Such fact leads us to conclude that maybe there are other problems not covered by the questionnaire such as poor ability to plan and execute experimental activities. As far as conceptions about experimental activities, it was verified in the majority of the interviewees a inductive-empiric point of view of science possibly inherited during their academic formation and such point of view reflected on the way they plan and execute experiments with students
Resumo:
Settled within the realm of a problematization towards teaching and learning the Portuguese language, this study aims to investigate the way how the Portuguese Language discipline is dealt with in Secondary School. We propose specifically to analyze the orientations of the official documents concerning the educator practice, examining the way the PCNEM proposal is approached in the didactic book, identifying the treatment given to language questions, analyzing the way the teacher uses the didactic book and verifying the relations between the official approach and the pedagogical practice. The analysis takes into account the several discourses concerning school literacy, considering the various political-educational instances which institutionalize the teaching of the mother tongue - where we locate the teaching that is wanted . In what teachers and students say in their activities and concerning them - the realm of the teaching that is performed - we presuppose that there are signs of the principles - or conceptions - that orientate what they understand by language, teaching and learning. Such evidences are considered within the interrelation of the enunciative places where this literacy is promoted: the public policies concerning education - focusing the language questions - the academic researches about those questions, the educator formation and capacitation and the very school practices in the complexity of their discoursive inter-subjectivity. The principles - or conceptions - are pursued in what is said (or not) about what is done (or not) in the classroom when dealing with the Portuguese Language. The corpus is made up of oral and written texts produced in Portuguese classes in the Secondary School at a public school in the city of Natal, Rio Grande do Norte, Brazil. Situated in the realm of Applied Linguistics, the research is conducted in a qualitative and interpretative perspective, following the ethnography of communication procedures and the contributions of the Functional Linguistics. In the observations, language conceptions were discerned, among others, besides beliefs and representations where the theoretical and practical aspects, professional roles, expectations and uncertainties were diluted.
Resumo:
O presente artigo apresenta uma análise do Plano Nacional de Saúde publicado em 2004. Este documento expressa um importante período de transição na gestão do SUS, uma vez que foi predecessor do Pacto pela Saúde. A partir de um estudo descritivo com base em procedimentos quantitativos e qualitativos, o objetivo foi compreender as ideias centrais do documento, identificando as conexões existentes entre seus princípios, objetivos e prioridades. O principal resultado do estudo foi a identificação da integralidade das ações, da capacitação dos recursos humanos e mudança do marco regulatório com base numa visão intersetorial como núcleo central do documento. Essas ideias, por sua vez, circulam pelo discurso das diretrizes do plano, fortalecendo os laços do eixo central do texto na reorganização da atenção ambulatorial e na qualificação profissional. Por fim, quando comparadas metas e ações previstas nas diretrizes, observa-se uma tensão entre o que foram denominados vetores da verticalidade e da horizontalidade, deixando em aberto o rumo do lugar social em disputa.
Resumo:
Pretendemos abordar os aspectos relacionados à Dança na Escola e pensarmos sobre uma formação continuada, a fim de discutir e refletir a elaboração de propostas de capacitação em Dança voltadas aos professores de Educação Física, principalmente no interior do Estado de São Paulo. Analisaremos a formação inicial dos professores, objetivos, conteúdos e possibilidades de aplicação da Dança no contexto educacional. Apesar do aumento das pesquisas em relação ao ensino da Dança na Escola, falta um espaço adequado e professores comprometidos com um trabalho sério, consciente e crítico, pois a hegemonia do esporte se encontra muito arraigada na cultura escolar. Uma forma de amenizar esse problema seriam cursos de capacitação, de forma permanente, voltados aos conteúdos de Dança, a fim de que esses professores possam ter vivências em práticas dançantes embasadas em uma fundamentação teórica para, assim, discutir, analisar e refletir a melhor maneira de trabalhar esta arte no âmbito escolar.
Resumo:
O objetivo desta pesquisa foi investigar se o repertório de habilidades sociais importantes para a formação ética de um grupo de estudantes de ensino médio, curso pré-vestibular e curso de graduação em psicologia evidenciava mudanças relacionadas à diferença de idade e características específicas dos contextos interativos oferecidos pelas instituições de ensino participantes desse processo. Foi aplicado o Inventário de Habilidades Sociais a uma amostra de 45 estudantes e questionários semiestruturados a nove professores. Entre os alunos, os resultados indicaram diferença estatisticamente significativa entre as classes das categorias de ensino investigadas em relação a diferentes conjuntos de habilidades sociais. Dos resultados obtidos com os professores, pode-se depreender que estes possuem noção clara das capacidades que o aluno deve obter para agir com ética e ser cidadão, mas esses professores não propiciam condições, no contexto escolar, para a promoção de tais habilidades. Isso indicou a necessidade de melhorias na capacitação dos docentes, visando à ampliação do repertório de habilidades sociais de seus alunos.
Resumo:
Correntes teóricas presentes na literatura científica têm demonstrado a importância das relações interpessoais para o processo de construção do conhecimento. É no contexto da interação professor e aluno que se configura a relação entre as necessidades educacionais dos alunos e as respostas pedagógicas a elas disponibilizadas, o que envolve o domínio do conhecimento pelo professor, sua capacitação técnico-científica, a competência de ensinar pesquisando, as características sócio-culturais e o perfil psicológico dos atores sociais envolvidos- professor e aluno. Buscando melhor compreender este universo, elaborou-se este estudo que teve como objetivo descrever as interações ocorridas entre uma professora, e seus alunos, em classes em que se propunha adotar uma prática pedagógica inclusiva. Os dados foram coletados em 2 salas de aula, em escola estadual de Ensino Fundamental, no município de Bauru. O processo de coleta de dados se deu através do registro da realidade de sala de aula em vídeo tape. Optou-se por este método, por permitir a recuperação posterior dos dados. A coleta se deu no transcorrer do 1º semestre do ano letivo de 2001. A análise fundamentou-se em sistema prévio de categorias, e tratou os dados quantitativa e qualitativamente. Os resultados demonstraram peculiaridades e diferenças nas interações da professora com os seus alunos, em função da presença ou ausência da deficiência. Indicaram, também, que a interação vem demonstrando avanços na prática educacional, no que diz respeito à atenção pedagógica, da professora, ao aluno com deficiência.
Resumo:
Family Health Strategy (FHS), founded in 1994 has appeared to play a strategic role in the SUS construction and consolidation. It has reaffirmed its Principles and Guidelines and has elected family as core of attention. The principle that has guided the work concerns the quality of the relationship between professional and family. Thus, the FHS has the family as a subject of health-disease process, and relations with its own characteristics and can be partners in building their health and improvement of quality of life of its members and the entire community. This study aims to characterize the surgeon-dentist (SD) working process in the family health strategy, from the knowledge of the SD integration with other team members; organization of services; development of shares, changes perceived by SDs, as well as knowing the surgeon-dentist profile who is part of this strategy. The collecting tool used was a semi-structured questionnaire, in which participated 30 professionals. As for profile, most professionals were women, completed the graduation in public university and did not have any training to work by joining the FHS. Almost all have other public or private working ties. They often carry out activities with students, and occasionally do home visits. In relation to team work, in activities such as home visits, school health, community activities, among others, they sometimes seek the cooperation of other members. The way of accessing for users in the most part has occurred through the schedule. The most frequently activities made to the Centro Especialidades Odontológicas (CEO), are in Endodontics and Prosthesis. The majority of them participate in team meetings, but they do not have frequency set to happen. As for the planning and programming of activities to be conducted, most said that individually develops them. Concerning the performance of their duties, most reported being satisfied, but that improvements could happen. Besides, they reported improvements in dental care following the inclusion of SD in the FHS in various aspects, such as access, organization, humanization, care and oral disease prevention. The professionals had poor integration with other team members, in addition to have a profile to more individualistic work, a fact seized by way of development and planning of actions. They work the actions in individual and curative way, in detriment promotion and collective ones. They work humanization, definition of territory and adscript population. Thus, it is concluded that the working process developed by SDs, includes the part which is advocated by FHS. This points out to a greater undertaking of this process aiming to detect the weakness met in order to reach the potential that the FHS represents in organization of basic attention