Continuous, Passive Liquid-Liquid Extraction and Emulsion Separation Within Microfluidic and Millifluidic Devices

Liquid-liquid extraction (LLE) is a method used to separate compounds based on their relative activity in two immiscible phases. By significantly reducing the scale of liquid-liquid extraction to the micro- and milli-fluidic levels, this separation process can bemade suitable for low volume, high value materials.

Efficient Liquid Liquid Extraction By Emulsion Formation and Separation in Robust Milli-Fluidic Devices

Conventional liquid liquid extraction (LLE) methods require large volumes of fluids to achieve the desired mass transfer of a solute, which is unsuitable for systems dealing with a low volume or high value product. An alternative to these methods is to scale down the process. Millifluidic devices share many of the benefits of microfluidic systems, including low fluid volumes, increased interfacial area-to-volume ratio, and predictability. A robust millifluidic device was created from acrylic, glass, and aluminum. The channel is lined with a hydrogel cured in the bottom half of the device channel. This hydrogel stabilizes co-current laminar flow of immiscible organic and aqueous phases. Mass transfer of the solute occurs across the interface of these contacting phases. Using a y-junction, an aqueous emulsion is created in an organic phase. The emulsion travels through a length of tubing and then enters the co-current laminar flow device, where the emulsion is broken and each phase can be collected separately. The inclusion of this emulsion formation and separation increases the contact area between the organic and aqueous phases, therefore increasing the area over which mass transfer can occur. Using this design, 95% extraction efficiency was obtained, where 100% is represented by equilibrium. By continuing to explore this LLE process, the process can be optimized and with better understanding may be more accurately modeled. This system has the potential to scale up to the industrial level and provide the efficient extraction required with low fluid volumes and a well-behaved system.

Quantification of plasma carnitine and acylcarnitines by high-performance liquid chromatography-tandem mass spectrometry using online solid-phase extraction

Carnitine is an amino acid derivative that plays a key role in energy metabolism. Endogenous carnitine is found in its free form or esterified with acyl groups of several chain lengths. Quantification of carnitine and acylcarnitines is of particular interest for screening for research and metabolic disorders. We developed a method with online solid-phase extraction coupled to high-performance liquid chromatography and tandem mass spectrometry to quantify carnitine and three acylcarnitines with different polarity (acetylcarnitine, octanoylcarnitine, and palmitoylcarnitine). Plasma samples were deproteinized with methanol, loaded on a cation exchange trapping column and separated on a reversed-phase C8 column using heptafluorobutyric acid as an ion-pairing reagent. Considering the endogenous nature of the analytes, we quantified with the standard addition method and with external deuterated standards. Solid-phase extraction and separation were achieved within 8 min. Recoveries of carnitine and acylcarnitines were between 98 and 105 %. Both quantification methods were equally accurate (all values within 84 to 116 % of target concentrations) and precise (day-to-day variation of less than 18 %) for all carnitine species and concentrations analyzed. The method was used successfully for determination of carnitine and acylcarnitines in different human samples. In conclusion, we present a method for simultaneous quantification of carnitine and acylcarnitines with a rapid sample work-up. This approach requires small sample volumes and a short analysis time, and it can be applied for the determination of other acylcarnitines than the acylcarnitines tested. The method is useful for applications in research and clinical routine.

Automatic extraction of the mid-facial plane for cranio-maxillofacial surgery planning

Recently developed computer applications provide tools for planning cranio-maxillofacial interventions based on 3-dimensional (3D) virtual models of the patient's skull obtained from computed-tomography (CT) scans. Precise knowledge of the location of the mid-facial plane is important for the assessment of deformities and for planning reconstructive procedures. In this work, a new method is presented to automatically compute the mid-facial plane on the basis of a surface model of the facial skeleton obtained from CT. The method matches homologous surface areas selected by the user on the left and right facial side using an iterative closest point optimization. The symmetry plane which best approximates this matching transformation is then computed. This new automatic method was evaluated in an experimental study. The study included experienced and inexperienced clinicians defining the symmetry plane by a selection of landmarks. This manual definition was systematically compared with the definition resulting from the new automatic method: Quality of the symmetry planes was evaluated by their ability to match homologous areas of the face. Results show that the new automatic method is reliable and leads to significantly higher accuracy than the manual method when performed by inexperienced clinicians. In addition, the method performs equally well in difficult trauma situations, where key landmarks are unreliable or absent.

Re-evaluating adjuvant breast cancer trials: assessing hormone receptor status by immunohistochemical versus extraction assays

BACKGROUND: Tumor levels of steroid hormone receptors, a factor used to select adjuvant treatment for early-stage breast cancer, are currently determined with immunohistochemical assays. These assays have a discordance of 10%-30% with previously used extraction assays. We assessed the concordance and predictive value of hormone receptor status as determined by immunohistochemical and extraction assays on specimens from International Breast Cancer Study Group Trials VIII and IX. These trials predominantly used extraction assays and compared adjuvant chemoendocrine therapy with endocrine therapy alone among pre- and postmenopausal patients with lymph node-negative breast cancer. Trial conclusions were that combination therapy provided a benefit to pre- and postmenopausal patients with estrogen receptor (ER)-negative tumors but not to ER-positive postmenopausal patients. ER-positive premenopausal patients required further study. METHODS: Tumor specimens from 571 premenopausal and 976 postmenopausal patients on which extraction assays had determined ER and progesterone receptor (PgR) levels before randomization from October 1, 1988, through October 1, 1999, were re-evaluated with an immunohistochemical assay in a central pathology laboratory. The endpoint was disease-free survival. Hazard ratios of recurrence or death for treatment comparisons were estimated with Cox proportional hazards regression models, and discriminatory ability was evaluated with the c index. All statistical tests were two-sided. RESULTS: Concordance of hormone receptor status determined by both assays ranged from 74% (kappa = 0.48) for PgR among postmenopausal patients to 88% (kappa = 0.66) for ER in postmenopausal patients. Hazard ratio estimates were similar for the association between disease-free survival and ER status (among all patients) or PgR status (among postmenopausal patients) as determined by the two methods. However, among premenopausal patients treated with endocrine therapy alone, the discriminatory ability of PgR status as determined by immunohistochemical assay was statistically significantly better (c index = 0.60 versus 0.51; P = .003) than that determined by extraction assay, and so immunohistochemically determined PgR status could predict disease-free survival. CONCLUSIONS: Trial conclusions in which ER status (for all patients) or PgR status (for postmenopausal patients) was determined by immunohistochemical assay supported those determined by extraction assays. However, among premenopausal patients, trial conclusions drawn from PgR status differed--immunohistochemically determined PgR status could predict response to endocrine therapy, unlike that determined by the extraction assay.

[Tooth extraction under medication with acetylsalicylic acid.]

PURPOSE: The purpose of this prospective study was to show and analyze the bleeding complications after teeth extraction under therapy with 100 mg acetylsalicylic acid (ASA) and to compare them to bleeding complications after teeth extraction in patients with a healthy blood profile.PATIENTS AND METHODS: In 65 patients under medication with 100 mg ASA and in 252 healthy patients, 151/ 543 teeth were extracted and the bleeding complications monitored.RESULTS: The postoperative bleeding frequency was 1.54% in the ASA 100 group and 1.59% in the healthy control group without any medication. No serious or uncontrollable postoperative bleedings arose in either group. All bleedings could be easily handled. No obvious difference concerning the bleeding frequency between the two groups was observed. The small number of bleeding events and the complexity of affecting parameters did not permit statistical tests.CONCLUSION: It is not necessary to interrupt the medication of 100 mg acetylsalicylic acid given to prevent thromboembolism before tooth extractions.

A study of the fate of the buccal wall of extraction sockets of teeth with prominent roots

The objective of this investigation was to determine the fate of thin buccal bone encasing the prominent roots of maxillary anterior teeth following extraction. Resorption of the buccal plate compromises the morphology of the localized edentulous ridge and makes it challenging to place an implant in the optimal position for prosthetic restoration. In addition, the use of Bio-Oss as a bone filler to maintain the form of the edentulous ridge was evaluated. Nine patients were selected for the extraction of 36 maxillary anterior teeth. Nineteen extraction sockets received Bio-Oss, and seventeen sockets received no osteogenic material. All sites were completely covered with soft tissue at the conclusion of surgery. Computerized tomographic scans were made immediately following extraction and then at 30 to 90 days after healing so as to assess the fate of the buccal plates and resultant form of the edentulous sites. The results were assessed by an independent radiologist, with a crest width of 6 mm regarded as sufficient to place an implant. Those sockets treated with Bio-Oss demonstrated a loss of less than 20% of the buccal plate in 15 of 19 test sites (79%). In contrast, 12 of 17 control sockets (71%) demonstrated a loss of more than 20% of the buccal plate. In conclusion, the Bio-Oss test sites outperformed the control sites by a significant margin. No investigator was able to predict which site would be successful without the grafting material even though all were experienced clinicians. This leads to the conclusion that a patient has a significant benefit from receiving grafting materials at the time of extraction.