Innovative Solutions for Slope Stability Reinforcement and Characterization: Vol. I, TR-489, 2005

Soil slope instability concerning highway infrastructure is an ongoing problem in Iowa, as slope failures endanger public safety and continue to result in costly repair work. Characterization of slope failures is complicated, because the factors affecting slope stability can be difficult to discern and measure, particularly soil shear strength parameters. While in the past extensive research has been conducted on slope stability investigations and analysis, this research consists of field investigations addressing both the characterization and reinforcement of such slope failures. The current research focuses on applying an infrequently-used testing technique comprised of the Borehole Shear Test (BST). This in-situ test rapidly provides effective (i.e., drained) shear strength parameter values of soil. Using the BST device, fifteen Iowa slopes (fourteen failures and one proposed slope) were investigated and documented. Particular attention was paid to highly weathered shale and glacial till soil deposits, which have both been associated with slope failures in the southern Iowa drift region. Conventional laboratory tests including direct shear tests, triaxial compression tests, and ring shear tests were also performed on undisturbed and reconstituted soil samples to supplement BST results. The shear strength measurements were incorporated into complete evaluations of slope stability using both limit equilibrium and probabilistic analyses. The research methods and findings of these investigations are summarized in Volume 1 of this report. Research details of the independent characterization and reinforcement investigations are provided in Volumes 2 and 3, respectively. Combined, the field investigations offer guidance on identifying the factors that affect slope stability at a particular location and also on designing slope reinforcement using pile elements for cases where remedial measures are necessary. The research findings are expected to benefit civil and geotechnical engineers of government transportation agencies, consultants, and contractors dealing with slope stability, slope remediation, and geotechnical testing in Iowa.

Innovative Solutions for Slope Stability Reinforcement and Characterization: Vol. II, TR-489, 2005

Soil slope instability concerning highway infrastructure is an ongoing problem in Iowa, as slope failures endanger public safety and continue to result in costly repair work. While in the past extensive research has been conducted on slope stability investigations and analysis, this current research study consists of field investigations addressing both the characterization and reinforcement of such slope failures. While Volume I summarizes the research methods and findings of this study, Volume II provides procedural details for incorporating an infrequently-used testing technique, borehole shear tests, into practice. Fifteen slopes along Iowa highways were investigated, including thirteen slides (failed slopes), one unfailed slope, and one proposed embankment slope (the Sugar Creek Project). The slopes are mainly comprised of either clay shale or glacial till, and are generally gentle and of small scale, with slope angle ranging from 11 deg to 23 deg and height ranging from 6 to 23 m. Extensive field investigations and laboratory tests were performed for each slope. Field investigations included survey of slope geometry, borehole drilling, soil sampling, in-situ Borehole Shear Testing (BST) and ground water table measurement. Laboratory investigations mainly comprised of ring shear tests, soil basic property tests (grain size analysis and Atterberg limits test), mineralogy analyses, soil classifications, and natural water contents and density measurements on the representative soil samples from each slope. Extensive direct shear tests and a few triaxial compression tests and unconfined compression tests were also performed on undisturbed soil samples for the Sugar Creek Project. Based on the results of field and lab investigations, slope stability analysis was performed on each of the slopes to determine the possible factors resulting in the slope failures or to evaluate the potential slope instabilities using limit equilibrium methods. Deterministic slope analyses were performed for all the slopes. Probabilistic slope analysis and sensitivity study were also performed for the slope of the Sugar Creek Project. Results indicate that while the in-situ test rapidly provides effective shear strength parameters of soils, some training may be required for effective and appropriate use of the BST. Also, it is primarily intended to test cohesive soils and can produce erroneous results in gravelly soils. Additionally, the quality of boreholes affects test results, and disturbance to borehole walls should be minimized before test performance. A final limitation of widespread borehole shear testing may be its limited availability, as only about four to six test devices are currently being used in Iowa. Based on the data gathered in the field testing, reinforcement investigations are continued in Volume III.

Innovative Solutions for Slope Stability Reinforcement and Characterization: Vol. III, TR-489, 2005

Soil slope instability concerning highway infrastructure is an ongoing problem in Iowa, as slope failures endanger public safety and continue to result in costly repair work. Volume I of this current study summarizes research methods and findings, while Volume II provides procedural details for incorporating into practice an infrequently-used testing technique–borehole shear tests. Volume III of this study of field investigation of fifteen slopes in Iowa demonstrates through further experimental testing how lateral forces develop along stabilizing piles to resist slope movements. Results establish the feasibility of an alternative stabilization approach utilizing small-diameter pile elements. Also, a step-by-step procedure that can be used by both state and county transportation agencies to design slope reinforcement using slender piles is documented. Initial evidence of the efficiency and cost-effectiveness of stabilizing nuisance slope failures with grouted micropiles is presented. Employment of the remediation alternative is deemed more appropriate for stabilizing shallow slope failures. Overall, work accomplished in this research study included completing a comprehensive literature review on the state of the knowledge of slope stability and slope stabilization, the preparation and performance of fourteen full-scale pile load tests, the analysis of load test results, and the documentation of a design methodology for implementing the technology into current practices of slope stabilization. Recommendations for further research include monitoring pilot studies of slope reinforcement with grouted micropiles, supplementary experimental studies, and advanced numerical studies.

Plant architecture of Paspalum vaginatum schwartz modified by nitrate and ammonium nutrition

Paspalum vaginatum Schwartz plants were grown under greenhouse conditions in a continuous-flow hydroponic culture, containing NO3- or NH4+or NH4NO3 as nitrogen source. After 30 days, the size of aerial biomass and root system decreased significantly when plants were supplied with NH4+as exclusive nitrogen source. Compared to NO3- treatment, reducing and non-reducing sugars were decreasing together with a significant increase in amino acids content. NH4+-nutrition caused tillers to grow toward an orthogravitropic position (average angle of 68° with respect to the horizontal), and with NO3--nutrition, tillers tended to become diagravitropic (average angle of 23°). With NH4NO3 all the parameters measured had values in between those of the other two sources. Thus, the morphologic differences among plants growing in NO3- or NH4+ nutrition confirm the hypothesis that nitrogen source determines the growth habit of tillers in P. vaginatum by modulating the endogenous levels of reducing-non-reducing sugars.

Effects of Deicing Salt Trace Compounds on Deterioration of Portland Cement Concrete, HR-271, 1987

A study was made of the detrimental effects of trace amounts of calcium sulfate (occurring naturally in halite deposits used for deicing) on portland cement concrete pavements. It was found that sulfate introduced as gypsum with sodium chloride in deicing brines can have detrimental effects on portland cement mortar. Concentrations of sulfate as low as 0.5% of the solute rendered the brine destructive. Conditions of brine application were critical to specimen durability. The mechanisms of deterioration were found to be due to pore filling resulting from compound formation and deposition. A field evaluation of deteriorating joints suggests that the sulfate phenomena demonstrated in the laboratory also operates in the field. A preliminary evaluation was made of remedies: limits on sulfates, fly ash admixtures, treatment of existing pavement, and salt treatments. This report gives details of the research objectives, experimental design, field testing, and possible solutions. Recommendations for further study are presented.

Calcium entry blockade attenuates the acute blood pressure rise induced by cigarette smoking.

The purpose of this study was to assess whether the administration of a calcium entry blocker can prevent the acute blood pressure rise induced by cigarette smoking. Seven male habitual smokers were included. After 45 min of equilibration, they took in randomized single-blind fashion at a 1 week interval either a placebo or nifedipine, 10 mg p.o. Thirty minutes thereafter, the subjects smoked within 10 min two cigarettes containing 1.4 mg of nicotine each. In addition to heart rate and skin blood flow (laser Doppler method), blood pressure of the median left finger was monitored continuously for 100 min using a noninvasive device (Finapres). Nifedipine induced an increase in skin blood flow that was not influenced by smoking. This skin blood flow response was observed although nifedipine had by itself no effect on systemic blood pressure. The calcium antagonist markedly attenuated the blood pressure rise induced by cigarette smoking. However, it tended to accentuate the heart rate acceleration resulting from inhalation of nicotine-containing smoke.

Calcium phosphate transfection generates mammalian recombinant cell lines with higher specific productivity than polyfection.

Transfection with polyethylenimine (PEI) was evaluated as a method for the generation of recombinant Chinese hamster ovary (CHO DG44) cell lines by direct comparison with calcium phosphate-DNA coprecipitation (CaPO4) using both green fluorescent protein (GFP) and a monoclonal antibody as reporter proteins. Following transfection with a GFP expression vector, the proportion of GFP-positive cells as determined by flow cytometry was fourfold higher for the PEI transfection as compared to the CaPO4 transfection. However, the mean level of transient GFP expression for the cells with the highest level of fluorescence was twofold greater for the CaPO4 transfection. Fluorescence in situ hybridization on metaphase chromosomes from pools of cells grown under selective pressure demonstrated that plasmid integration always occurred at a single site regardless of the transfection method. Importantly, the copy number of integrated plasmids was measurably higher in cells transfected with CaPO4. The efficiency of recombinant cell line recovery under selective pressure was fivefold higher following PEI transfection, but the average specific productivity of a recombinant antibody was about twofold higher for the CaPO4-derived cell lines. Nevertheless, no difference between the two transfection methods was observed in terms of the stability of protein production. These results demonstrated the feasibility of generating recombinant CHO-derived cell lines by PEI transfection. However, this method appeared inferior to CaPO4 transfection with regard to the specific productivity of the recovered cell lines.

Experimental Use of Calcium Magnesium Acetate, HR-253, 1983

The Iowa Department of Transportation Materials Laboratory personnel announced in early 1982 a process to produce a road deicer consisting of sand grains coated with calcium magnesium acetate (CMA). From that point forward the Iowa DOT began searching for a means of economically producing CMA to their concept. During 1983 and 1984 the first attempts devised for commercially producing CMA were attempted by the W.G. Block Company, Davenport, Iowa, under Iowa Highway Research Board Project HR-253. This first attempt at commercially producing CMA was accomplished by the use of concrete transit mixer equipment. Even though this procedure proved successful in the batch mixing of CMA, the need for higher production rates to reduce the cost per ton still existed. During the fall of 1984, Cedarapids Inc, Cedar Rapids, Iowa, proposed to Iowa DOT personnel the application of their technology to a continuous mixing concept for CMA. Arrangements were made for the continuous test mixing of 60 to 100 tons of CMA/sand deicer. This report covers the production effort, description and results of procedures outlined in Cedarapids Inc's proposal of September 19, 1984. The objectives of this research were: 1. To produce the CMA/sand deicer concept on a continuous mixing basis to Iowa DOT CMA concentration levels. 2. To evaluate the results of preheating the carrying vehicle (sand) prior to CMA ingredient introduction. 3. To analyze the feasibility of production equipment and procedures necessary for portable and/or stationary applications of continuous mixing concepts.

Neuronal calcium channel mutation in a patient with congenital ataxia and attacks of hemiplegic migraine with cerebral edema

Background: Familial Hemiplegic Migraine (FHM), characterized by a prolonged unilateral hemiparesis, mainly results from mutations in the alpha-1a subunit of the calcium channel gene CACNA1A that can also cause two other dominantly inherited neurological disorders, Episodic Ataxia type 2 (EA2, with sometimes migrainous headaches) and Spinocerebellar Ataxia type 6 (SCA6, late-onset and progressive). A same mutation can have different clinical expression in a family (hemiplegic migraine, migraine-coma, cerebellar ataxia). CACNA1A mutations in FHM are usually missense, leading to gain-of-function, while truncating mutations leading to loss-of-function are usually associated with EA2. Case report: This 9-year-old girl was seen as a baby for hypotonia and transient vertical nystagmus. Her first brain MRI was normal. She evolved as a congenital ataxia, but since the age of two, she had attacks of coma, hemiparesis (either side), partial seizures, dystonic movements and fever. Attacks were initially triggered by minor head bumps, subsequently spontaneous. Brain MRIs in the acute stage always showed transient unilateral hemisphere swelling. Follow-up images revealed atrophic lesions in the temporo-occipital regions and cerebellar atrophy. A prophylactic trial with flunarizine was ineffective. Acetazolamide was recently introduced. Methods: Since our patient shared features of both FHM and EA2, we studied the CACNA1A gene by direct sequencing in the patient's and parents' DNA. Results: We identified an unreported de novo heterozygous deletion of three base pairs (c.4503_4505delCTT) predicting the deletion of one amino acid (p.Phe1502del). The CACNA1A protein contains 4 domains, each formed by six transmembrane segments. The deletion is located in a highly conserved region in segment 6 (S6) of the third domain. Mutations in S6 segments of calcium channels change single-channel conductance and channel selectivity, most resulting in loss-of-function. Outlook: In vitro expression studies of the identified mutation are underway, aiming at understanding its functional consequences and finding an efficient treatment.

Calcium Microdomains Control Exo-Endocytosis of Synaptic-Like Microvesicles in Astrocytes

During the last decade, the discovery that astrocytes possess a nonelectrical form of excitability (Ca21-excitability) that leads to the release of chemical transmitters, an activity called ''gliotransmission'', indicates that these cells may have additional important roles in brain function. Elucidating the stimulus-secretion coupling leading to the exocytic release of chemical transmitters (such as glutamate, Bezzi et al., Nature Neurosci, 2004) may therefore clarify i) whether astrocytes represent in full a new class of secretory cells in the brain and ii) whether they can participate to the fast brain signaling in the brain. Here by using a recently developed approach for studying vesicle recycling dynamics at synapses (Voglmaier et al., Neuron, 2006; Balaji and Ryan, PNAS, 2007) combined with epifluorescence and total internal reflection fluorescence (TIRF) imaging, we investigated the spatiotemporal characteristics of stimulus-secretion coupling leading glutamate exocytosis of synaptic-like microvesicles (SLMVs) in astrocytes. We performed the analysis at both the whole-cell and single-vesicle levels providing the first system for comparing exo-endocytic processes in astrocytes with those in neurons. Both the time course and modalities of secretion in astrocytes present more similarities to neurons then previously expected. We found that 1. the G-protein-coupled receptor (GPCR)-evoked exocytosis reached the maximum on a ms time scale and that 2. ER tubuli formed sub-micrometer domains beneath the plasma membrane in close proximity to exocytic vesicles, where fusion events were spatiotemporally correlated with fast Ca21 events.

Evaluation of Calcium Magnesium Acetate Deicer in Scott County, HR-253, Progress Report, 1987

The field testing of the noncorrosive alternative deicing agent, calcium magnesium acetate is described. Seventy three tons were produced of one part CMA and three parts sand deicer which was field tested on I-280 from I-80 to the Mississippi River (7,000 ADT with 50% trucks). A comparative application was made with one part sand and one part sodium chloride. The study found that CMA deicer required a longer time for the pavement to reach normal conditions, and 20-25% more CMA deicer to provide the desired deicing. It was concluded that the CMA deicer was not as dependable as the sodium chloride deicing agent, and it was more difficult to clean up the equipment for spreading the CMA deicer.

Long-term and long range migration of radioisotopes in terrestrial systems : mechanisms of radioisotopes (Cs, Sr, Pu, Am) mobilization in soils

Summary Artificial radionuclides were released in the environment during the atmospheric nuclear weapon tests and after accidental events involving nuclear industries. As a primary receptor of the deposition, the soil is a very sensitive compartment and understanding the interaction and migration of radionuclides within soils allows the development of scenario for the contamination risk of the population and of the environment. Most available field studies on radionuclides in soils only concern one or two isotopes, mostly 137Cs, and few physico-chemical soil parameters. The purpose of this study was a broader understanding of the radioecology of an Alpine valley. In a first part, we aimed to describe the depth distribution of 137Cs, 90Sr, 239+240Pu, and 241Am within different alpine soils and to identify some stable elements as indicators for accumulating layers. In the central part of the study, the goal was to investigate the repartition of ^Sr and 239Pu between the truly dissolved fraction and the colloidal fraction of the soil solutions and to identify the nature of colloids involved in the adsorption of ^Sr and 239Pu. These results were integrated in an "advection- sorption" transport model seeking to explain the migration of 239Pu and 90Sr within the soils and to assess the importance of colloidal transport for these two isotopes. A further aspect studied was the role of the competition between the radioisotopes (137Cs and 90Sr) and their stable chemical analogues (K and Ca) with respect to plant uptake by different plant species. The results on the depth distribution within the soils showed that 137Cs was mostly retained in the topsoil, to the exception of an organic-rich soil (Histosol 2) receiving important surface runoff, where migration down to a depth of 30 cm was observed. 137Cs depth distribution within the soils was similar to unsupported 210Pb depth distribution. The plant uptake of 137Cs clearly depended on the concentration of exchangeable potassium in the soils. Moreover, we showed that the 137Cs uptake by certain species of the taxonomic orders Poales and Rosales was more sensitive to the increase in exchangeable Κ compared to other orders. Strontium-90 was much more mobile in the soils than 137Cs and depth migration and accumulation in specific AI- and Fe-rich layers were found down to 30 cm. Copper and Ni showed accumulations in these same layers, indicating their potential to be used as indicators for the migration of ^Sr within the soils. In addition, we observed a 90Sr activity peak in the topsoil that can be attributable to recycling of 90Sr by plant uptake. We demonstrated for the first time that a part of 90Sr (at least 40%) was associated with the colloids in organic-rich soil solutions. Therefore, we predict a significant effect of the colloidal migration of ^Sr in organic-rich soil solutions. The plant uptake results for 90Sr indicated a phylogenetic effect between Non-Eudicot and Eudicots: the order Poales concentrating much less 90Sr than Eudicots do. Moreover, we were able to demonstrate that the sensitivity of the 90Sr uptake by 5 different Alpine plant species to the amount of exchangeable Ca was species-independent. Plutonium and 241Am accumulated in the second layer of all soils and only a slight migration deeper than 20 cm was observed. Plutonium and 241Am showed a similar depth distribution in the soils. The model results suggested that the present day migration of 239Pu was very slow and that the uptake by plants was negligible. 239Pu activities between 0.01 to 0.08 mBq/L were measured in the bulk soil solutions. Migration of 239Pu with the soil solution is dominated by colloidal transport. We reported strong evidences that humic substances were responsible of the sorption of 239Pu to the colloidal fraction of the soil solutions. This was reflected by the strong correlation between 239Pu concentrations and the content of (colloidal) organic matter in the soil solution. Résumé Certains radioéléments artificiels ont été disséminés dans l'environnement suite aux essais atmosphériques de bombes nucléaires et suite à des accidents impliquant les industries nucléaires. En tant que récepteur primaire de la déposition, le sol est un compartiment sensible et des connaissances sur les interactions et la migration des radioéléments dans le sol permettent de développer des modèles pour estimer la contamination de la population et de l'environnement. Actuellement, la plupart des études de terrain sur ce sujet concernent uniquement un ou deux radioéléments, surtout le 137Cs et peu d'études intègrent les paramètres du sol pour expliquer la migration des radioéléments. Le but général de cette étude était une compréhension étendue de la radio-écologie d'une vallée alpine. Notre premier objectif était de décrire la distribution en profondeur de 137Cs, ^Sr, 239+240pu et 241Am dans différents sols alpins en relation avec des éléments stables du sol, dans le but d'identifier des éléments stables qui pourraient servir d'indicateurs pour des horizons accumulateurs. L'objectif de la deuxième partie, qui était la partie centrale de l'étude, était d'estimer le pourcentage d'activité sous forme colloïdale du 239Pu et du 90Sr dans les solutions des sols. De plus nous avons déterminé la nature des colloïdes impliqués dans la fixation du ^Sr et 239Pu. Nous avons ensuite intégré ces résultats dans un modèle de transport développé dans le but de décrire la migration du 239Pu et 90Sr dans le sol. Finalement, nous avons étudié l'absorption de 137Cs et 90Sr par les plantes en fonction de l'espèce et de la compétition avec leur élément analogue stable (K et Ca). Les résultats sur la migration en profondeur du 137Cs ont montré que ce radioélément était généralement retenu en surface, à l'exception d'un sol riche en matière organique dans lequel nous avons observé une nette migration en profondeur. Dans tous les sols, la distribution en profondeur du 137Cs était corrélée avec la distribution du 210Pb. L'absorption du 137Cs par les plantes, était dépendante de la concentration en Κ échangeable dans le sol, le potassium étant un compétiteur. De plus, nous avons observé que les espèces ne réagissaient pas de la même manière aux variations de la concentration de Κ échangeable. En effet, les espèces appartenant aux ordres des Poales et des Rosales étaient plus sensibles aux variations de potassium échangeable dans le sol. Dans tous les sols Le 90Sr était beaucoup plus mobile que le 137Cs. En effet, nous avons observé des accumulations de 90Sr dans des horizons riches en Fe et Al jusqu'à 30 cm de profondeur. De plus, le Cu et le Ni montraient des accumulations dans les mêmes horizons que le 90Sr, indiquant qu'il pourrait être possible d'utiliser ces deux éléments comme analogues pour la migration du 90Sr. D'après le modèle développé, le pic de 90Sr dans les premiers centimètres du sol peut être attribué à du recyclage par les plantes. Le 90Sr en solution était principalement sous forme dissoute dans des solutions de sols peu organique (entre 60 et 100% de 90Sr dissous). Par contre, dans des solutions organiques, un important pourcentage de 90Sr (plus de 40%) était associé aux colloïdes. La migration colloïdale du 90Sr peut donc être significative dans des solutions organiques. Comme pour le 137Cs, l'absorption du 90Sr par les plantes dépendait de la concentration de son analogue chimique dans la fraction échangeable du sol. Par contre, les espèces de plantes étudiées avaient la même sensibilité aux variations de la concentration du calcium échangeable. Le plutonium et l'américium étaient accumulés dans le deuxième horizon du sol et nous avons observé seulement une faible migration plus profondément que 20 cm. Selon le modèle, la migration actuelle du plutonium est très lente et l'absorption par les plantes semble négligeable. Nous avons mesuré entre 0.01 et 0.08 mBq/L de 239Pu dans les solutions de sol brutes. La migration du plutonium par la solution du sol est due principalement aux colloïdes, probablement de nature humique. Résumé grand public Dans les années 1950 à 1960, l'environnement a été contaminé par des éléments radioactifs (radioéléments) artificiels provenant des essais des armes atomiques et de l'industrie nucléaire. En effet, durant ces années, les premiers essais de bombes atomiques se faisaient dans l'atmosphère, libérant de grandes quantités d'éléments radioactifs. De plus certains accidents impliquant l'industrie nucléaire civile ont contribué à la dissémination d'éléments radioactifs dans l'environnement. Ce fut par exemple le cas de l'accident de la centrale atomique de Tchernobyl en 1986 qui a causé une importante contamination d'une grande partie de l'Europe par le 137Cs. Lorsqu'ils sont libérés dans l'atmosphère, les radioéléments sont dispersés et transportés par les courants atmosphériques, puis peuvent être déposés dans l'environnement, principalement par les précipitations. Une fois déposés sur le sol, les radioéléments vont interagir avec les composants du sol et migrer plus ou moins vite. La connaissance des interactions des éléments radioactifs avec le sol est donc importante pour prédire les risques de contamination de l'environnement et de l'homme. Le but général de ce travail était d'évaluer la migration de différents éléments radioactifs (césium-137, strontium-90, plutonium et américium-241) à travers le sol. Nous avons choisi un site d'étude en milieu alpin (Val Piora, Tessin, Suisse), contaminé en radioéléments principalement par les retombées de l'accident de Tchernobyl et des essais atmosphériques de bombes atomiques. Dans un premier temps, nous avons caractérisé la distribution en profondeur des éléments radioactifs dans le sol et l'avons comparée à divers éléments stables. Cette comparaison nous a permit de remarquer que le cuivre et le nickel s'accumulaient dans les mêmes horizons du sol que le strontium-90 et pourraient donc être utilisés comme analogue pour la migration du strontium-90 dans les sols. Dans la plupart des sols étudiés, la migration du césium-137, du plutonium et de l'américium-241 était lente et ces radioéléments étaient donc accumulés dans les premiers centimètres du sol. Par contre, le strontium-90 a migré beaucoup plus rapidement que les autres radioéléments si bien qu'on observe des accumulations de strontium-90 à plus de 30 cm de profondeur. Les radioéléments migrent dans la solution du sol soit sous forme dissoute, soit sous forme colloïdale, c'est-à-dire associés à des particules de diamètre < Ιμηι. Cette association avec des colloïdes permet à des radioéléments peu solubles, comme le plutonium, de migrer plus rapidement qu'attendu. Nous avons voulu savoir quelle était la part de strontium-90 et plutonium associés à des colloïdes dans la solution du sol. Les résultats ont montré que le plutonium en solution était principalement associé à des colloïdes de type organique. Quant au strontium-90, ce dernier était en partie associé à des colloïdes dans des solutions de sol riches en matière organique, par contre, il était principalement sous forme dissoute dans les solutions de sol peu organiques. L'absorption de radioéléments par les plantes représente une voie importante pour le transfert vers la chaîne alimentaire, par conséquent pour la contamination de l'homme. Nous avons donc étudié le transfert du césium-137 et du strontium-90 de plusieurs sols vers différentes espèces de plantes. Les résultats ont montré que l'absorption des radioéléments par les plantes était liée à la concentration de leur analogue chimique (calcium pour le strontium-90 et potassium pour le césium- 137) dans la fraction échangeable du sol. De plus certaines espèces de plantes accumulent significativement moins de strontium-90.

Development of an Economic Dust Palliative for Limestone Surfaced Secondary Roads, HR-297, 1990

This research project was directed at laboratory and field evaluation of sodium montmorillonite clay (bentonite) as a dust palliative for limestone surfaced secondary roads. It had been postulated that the electrically charged surfaces of the clay particles could interact with the charged surfaces of the limestone and act as a bonding agent to agglomerate fine (-#200) particulates and also to band the fine particulates to larger (+#200) limestone particles. Laboratory testing using soda ash dispersed bentonite treatment of limestone fines indicated significant improvement of compressive strength and slaking characteristics. It was recommended that the project proceed to field trials and test roads were constructed in Dallas and Adair counties in Iowa. Soda ash dispersed bentonite solutions can be field mixed and applied with conventional spray distribution equipment. A maximum of 1.5% bentonite(by weight of aggregate)can be applied at one time. Higher applications would have to be staged allowing the excess moisture to evaporate between applications. Construction of higher application treatments can be accomplished by adding dry bentonite to the surfacing material and then by dry road mixing. The soda ash water solution can then be spray applied and the treated surfacing material wet mixed by motor graders to a consistency of 3 to 4 inch slump concrete. Two motor graders working in tandem can provide rapid mixing for both methods of construction. Calcium and magnesium chloride treatments are 2 to 3 times more effective in dust reduction in the short term (3-4 months) but are prone to washboarding and potholing due to maintenance restrictions. Bentonite treatment at the 2-3% level is estimated to provide a 30-40% dust reduction over the long term(18-24 months). Normal maintenance blading operations can be used on bentonite treated areas. Vehicle braking characteristics are not adversely affected up to the 3.0% treatment level. The bentonite appears to be functioning as a banding agent to bind small particulates to larger particles and is acting to agglomerate fine particles of limestone. This bonding capability appears recoverable from environmental effects of winter, and from alternating wet and dry periods. The bentonite appears to be able to interact with new applications of limestone maintenance material and maintains a dust reduction capability. Soda ash dispersed bentonite treatment is approximately 10 times more cost effective per percent dust reduction than conventional chloride treatments with respect to time. However,the disadvantage is that there is not the initial dramatic reduction in dust generation as with the chloride treatment. Although dust is reduced 30-40% after treatment there is still dust being generated and the traveling public or residents may not perceive the reduction.

Mobilizing and evaluating anticancer T cells: pitfalls and solutions.

Immunotherapy is a promising means to fight cancer, prompting a steady increase in clinical trials and correlative laboratory studies in this field. As antitumor T cells play central roles in immunity against malignant diseases, most immunotherapeutic protocols aim to induce and/or strengthen their function. Various treatment strategies have elicited encouraging clinical responses; however, major challenges have been uncovered that should be addressed in order to fully exploit the potential of immunotherapy. Here, we outline pitfalls for the mobilization of antitumor T cells and offer solutions to improve their therapeutic efficacy. We provide a critical perspective on the main methodologies used to characterize T-cell responses to cancer therapies, with a focus on discrepancies between T-cell attributes measured in vitro and protective responses in vivo. This review altogether provides recommendations to optimize the design of future clinical trials and highlights important considerations for the proficient analysis of clinical specimens available for research.

N-partitioning, nitrate reductase and glutamine synthetase activities in two contrasting varieties of maize

In order to identify useful parameters for maize genetic breeding programs aiming at a more efficient use of N, two maize varieties of contrasting N efficiency, Sol da Manhã NF (efficient) and Catetão (inefficient) were compared. Experiments were carried out under field and greenhouse conditions, at low and high N levels. The parameters analysed included total and relative plant and grain N content, biomass and the activities of nitrate reductase and glutamine synthetase in different parts of the plant. It was found that the translocation efficiency of N and photoassimilates to the developing seeds and the source-sink relations were significantly different for the two varieties. N content of the whole plant and grain, cob weight and the relative ear dry weight were useful parameters for characterizing the variety Sol da Manhã NF as to its efficient use of N. Enzymes activity of glutamine synthetase (transferase reaction) and nitrate reductase did not differ among the varieties.