Re-framing risk transfer to assess integrative partnership opportunities: the S.A.R. approach and the AIG/BID/CNO regional surety bond facility of 2007

Identificar, compartilhar e gerenciar os riscos de contratar são preocupações que impedem o estabelicmento e a administração das Parcerias Públicos Particulares (PPP). Porem, gerentes das entidades públicas, bancos de formento, construtoras e seguradoras pesquisam e utilizam muitas técnicas para enfrentar a avaliação e gerenciamento dos riscos. A transferência de risco é uma indicação dos chamados benefícios que são inspirados pelos PPP, contudo devido às realidades contratuais e conceptuais, a entidade de cede o risco (o partido público) permanece quase sempre como o portador final do risco. Conseqüentemente, o partido público retem um interesse de resistência na gerência total destes riscos cedidos. Esta dissertação explora alguns defeitos das aproximações comuns a conceituar a gestão de risco no contexto de um PPP. Focalizando os conceitos da interdependência e da reciprocidade e usando na decisão para transferir o risco do projeto, esta dissertação molda a decisão para transferir o risco nos termos das realidades interdependentes de relacionamentos sistemáticos, alargam os conceitos técnicos do risco e da avaliação de risco, considerando o uso reflexivo das diferenças na analise de um estudo de caso. O autor explora estes conceitos em uma análise da decisão de um gerente de risco da empresa de construção civil brasileira Construtora Norberto Odebrecht (ODB) para projetar uma facilidade inovadora da ligação de garantia com Inter-American Development Bank (BID) e uma seguradora, American International Group (AIG), um negócio que ganhe o reconhecimento Trade Finance Magazine’s 2007 deal of the year. O autor mostra que por compreender a transferência de risco nos termos abordados nesta dissertação, um atore que transfere o risco pode identificar e criar mais oportunidades de estabelecer relacionamentos em longo prazo, através dos processos que a literatura atual do PPP ainda não considere. Os resultados devem fornecer contribuições para a pesquisas sobre a transferência do risco do projeto, na cooperação entre organizações e na seleção do sócio do projeto do potencial.

Evaluation of solid residues removed from a mangrove swamp in the Sao Vicente Estuary, SP, Brazil

Mangrove swamps are found in estuaries along the coastal plains of tropical regions and have be subjected to heavy occupation and use pressure due to their privileged locations and abundance of biological resources. The present work evaluated the ecological characteristics and solid wastes accumulated in eight areas along the Santos - Sao Vicente Estuary Complex. The superficially deposited residues at each sampling site were collected and subsequently washed, drained, counted, weighed and separated into classes according to their composition and predominant use. The predominant litter type in terms of density was plastic (62.81%) and, by weight, wood (55.53%). The greatest deposition of residues was associated with areas that were less inclined and that had low plant density levels, indicating that the presence of obstacles was not critical for retaining floating residues in mangrove areas. The presence of the most frequently encountered types of solid waste residues could be explained by local activities. (C) 2010 Elsevier Ltd. All rights reserved.

Reproductive migration and population dynamics of the blue crab Callinectes danae in an estuary in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Respiratory heat loss in the sheep: a comprehensive model

A model is presented for the respiratory heat loss in sheep, considering both the sensible heat lost by convection (C-R) and the latent heat eliminated by evaporation (E-R). A practical method is described for the estimation of the tidal volume as a function of the respiratory rate. Equations for C-R and E-R are developed and the relative importance of both heat transfer mechanisms is discussed. At air temperatures up to 30 degreesC sheep have the least respiratory heat loss at air vapour pressures above 1.6 kPa. At an ambient temperature of 40 degreesC respiratory loss of sensible heat can be nil; for higher temperatures the transfer by convection is negative and thus heat is gained. Convection is a mechanism of minor importance for the respiratory heat transfer in sheep at environmental temperatures above 30 degreesC. These observations show the importance of respiratory latent heat loss for thermoregulation of sheep in hot climates.

Best site for embryo transfer: the upper or lower half of endometrial cavity?

BACKGROUND: the objective of the present study was to determine the importance of the site of embryo transfer (upper or lower half endometrial cavity) on implantation and clinical pregnancy rates. METHODS: A total of 400 transfers guided by ultrasound were randomly assigned to two groups according to the distance between the uterine fundus and the catheter tip at the time of embryo placement. Group I (n=200) consisted of transfers corresponding to a distance of <50% of the endometrial cavity length (ECL), i.e. transfer in upper half of the cavity; and group II (n=200) consisted of transfers corresponding to a distance of greater than or equal to50%, of the ECL, i.e. transfer in lower half of cavity. The Student's t-test, Mann-Whitney test and Fisher's exact test were used where appropriate. RESULTS: the general characteristics of the study population and the main transfer cycle characteristics had an equal distribution (P>0.05) between groups I and II. No significant difference in implantation or pregnancy rates was observed between groups I and II. CONCLUSION: the implantation or pregnancy rates were similar whether the embryos were deposited in the upper or lower half of the endometrial cavity.

Low-energy muon-transfer reaction from hydrogen isotopes to helium isotopes

Direct muon transfer in low-energy collisions of the muonic hydrogen H-mu and helium (He++) is considered in a three-body quantum-mechanical framework of coordinate-space integro-differential Faddeev-Hahn-type equations within two- and six-state close coupling approximations. The final-state Coulomb interaction is treated without any approximation employing appropriate Coulomb waves in the final state. This procedure of treating Coulomb interaction leads to much improved results for low-energy transfer rates. The present results agree reasonably well with previous semiclassical calculations. (C) 2002 Elsevier B.V. B.V. All rights reserved.

On energy transfer between vibrating systems under linear and nonlinear interactions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On energy transfer between linear and nonlinear oscillators

In this paper energy transfer in a dissipative mechanical system is analysed. Such system is composed of a linear and a nonlinear oscillator with a nonlinearizable cubic stiffness. Depending on initial conditions, we find energy transfer either from linear to nonlinear oscillator (energy pumping) or from nonlinear to linear. Such results are valid for two different potentials. However, under resonance and absence of external excitation, if the mass of the nonlinear oscillator is adequately small then the linear oscillator always loses energy. Our approach uses rigorous Regular Perturbation Theory. Besides, we have included the case of two linear oscillators under linear or cubic interactions. Comparisons with the earlier case are made. (c) 2008 Elsevier Ltd. All rights reserved.

Analysis of Er3+ incorporation in SnO2 by optical investigation

Er3+ emission in the wide bandgap matrix SnO2 is observed either through a direct Er ion excitation process as well as by an indirect process, through energy transfer in samples codoped with Yb3+ ions. Electron-hole generation in the tin dioxide matrix is also used to promote rare-earth ion excitation. Photoluminescence spectra as function of temperature indicate a slight decrease in the emission intensity with temperature increase, yielding low activation energy, about 3.8meV, since the emission even at room temperature is rather considerable.

Forced convection to laminar flow of liquid egg yolk in circular and annular ducts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do fator de crescimento semelhante à insulina I (IGF-I) adicionado ao meio fluido sintético de tuba uterina (SOF) sobre a maturação in vitro de oócitos caninos (Canis familiaris)

The follicular growth and oocyte maturation knowledge are very important to the development and improvement of new biotechnologies such as in vitro fertilization and somatic cell nuclear transfer. In order to the necessity of clarify the basic mechanisms related to canine oocyte maturation, this investigation focuses on the evaluation of the effect of insulin-like growth factor-i (IGF-I), added to synthetic oviductal fluid medium (SOF) on the in vitro maturation of domestic dog oocytes. Thirty-seven bitches undergoing ovariohysterectomy for castration or due to pathological conditions of the uterus were selected as oocytes' donors (n=875). The oocytes were allocated in the following groups: MO (stained in the collection's time), Control (72h in SOF) and Experimental (72h in SOF plus 100 ng IGF-I). After 72 hours of maturation the oocytes' nuclear status were assessed by Hoechst 33342 dye. The best results in terms of oocyte harvest were observed in those juvenile donors,, females in estrus, nuliparous and pure breeds. No significant differences were observed between treatments control (SOF) or experimental (IGF-I).

Cephalosporin C production by immobilized Cephalosporium acremonium cells in a repeated batch tower bioreactor

The industrial production of antibiotics with filamentous fungi is usually carried out in conventional aerated and agitated tank fermentors. Highly viscous non-Newtonian broths are produced and a compromise must be found between convenient shear stress and adequate oxygen transfer. In this work, cephalosporin C production by bioparticles of immobilized cells of Cephalosporium acremonium ATCC 48272 was studied in a repeated batch tower bioreactor as an alternative to the conventional process. Also, gas-liquid oxygen transfer volumetric coefficients, k(L)a, were determined at various air flow-rates and alumina contents in the bioparticle. The bioparticles were composed of calcium alginate (2.0% w/w), alumina (<44 micra), cells, and water. A model describing the cell growth, cephalosporin C production, oxygen, glucose, and sucrose consumption was proposed. To describe the radial variation of oxygen concentration within the pellet, the reaction-diffusion model forecasting a dead core bioparticle was adopted. The k(L)a measurements with gel beads prepared with 0.0, 1.0, 1.5, and 2.0% alumina showed that a higher k(L)a value is attained with 1.5 and 2.0%. An expression relating this coefficient to particle density, liquid density, and air velocity was obtained and further utilized in the simulation of the proposed model. Batch, followed by repeated batch experiments, were accomplished by draining the spent medium, washing with saline solution, and pouring fresh medium into the bioreactor. Results showed that glucose is consumed very quickly, within 24 h, followed by sucrose consumption and cephalosporin C production. Higher productivities were attained during the second batch, as cell concentration was already high, resulting in rapid glucose consumption and an early derepression of cephalosporin C synthesizing enzymes. The model incorporated this improvement predicting higher cephalosporin C productivity. (C) 2004 Wiley Periodicals, Inc.

The electrochemical cleavage of the nitrobenzoyl group from butyl nitrobenzoates in N,N-dimethylformamide

The applicability of the nitrobenzoyl group [NO2C6H4CO-] to protecting the functional hydroxyl group was investigated through study of the electrochemical behaviour of the butyl 4-, 3- and 2-nitrobenzoate compounds. These isomers are reduced in two cathodic steps. The first, at potentials of ca. -0.9 V vs. SCE, is attributed to the formation of rather stable anion radicals, involving one-electron transfer. The second, at potentials of ca. -1.7 V vs. SCE, occurs with a two-electron transfer in an ECE process, in which the dianion produced undergoes scission of the C-O bond giving n-butanoate ions with high yields (similar to 80%)

Respiratory heat loss of Holstein cows in a tropical environment

In order to develop statistical models to predict respiratory heat loss in dairy cattle using simple physiological and environmental measurements, 15 Holstein cows were observed under field conditions in a tropical environment, in which the air temperature reached up to 40 &DEG; C. The measurements of latent and sensible heat loss from the respiratory tract of the animals were made by using a respiratory mask. The results showed that under air temperatures between 10 and 35 &DEG; C sensible heat loss by convection decreased from 8.24 to 1.09 W m(-2), while the latent heat loss by evaporation increased from 1.03 to 56.51 W m(-2). The evaporation increased together with the air temperature in almost a linear fashion until 20 &DEG; C, but it became increasingly high as the air temperature rose above 25 &DEG; C. Convection was a mechanism of minor importance for respiratory heat transfer. In contrast, respiratory evaporation was an effective means of thermoregulation for Holsteins in a hot environment. Mathematical models were developed to predict both the sensible and latent heat loss from the respiratory tract in Holstein cows under field conditions, based on measurements of the ambient temperature, and other models were developed to predict respiration rate, tidal volume, mass flow rate and expired air temperature as functions of the ambient temperature and other variables.

Numerical and experimental analysis of natural convection in a cavity with flush mounted heat sources on a side wall

This work considers a problem of interest in several technological applications such as the thermal control of electronic equipment. It is also important to study the heat transfer performance of these components under off-normal conditions, such as during failure of cooling fans. The effect of natural convection on the flow and heat transfer in a cavity with two flush mounted heat sources on the left vertical wall, simulating electronic components, is studied numerically and experimentally. The influence of the power distribution, spacing between the heat sources and cavity aspect ratio have been investigated. An analysis of the average Nusselt number of the two heat sources was performed to investigate the behavior of the heat transfer coefficients. The results obtained numerically and experimentally, after an error analysis, showed a good agreement.