Estimating the prevalence of unregistered driving in Queensland. Report to Queensland Department of Transport and Main Roads

A state-wide observational study was undertaken by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q) in order to investigate the prevalence of unregistered vehicles on Queensland roads. This study was conducted on behalf of the Queensland department of Transport and Main Roads (TMR). This study builds upon research commissioned by Queensland Transport and conducted in 2000, 2003 and 2005. Vehicles were observed throughout Queensland from April 13th, 2010 to May 8th, 2010 in a mix of small rural towns, regional centres and metropolitan locations. The locations sampled for this study were restricted to destinations (e.g. shopping centres, hospitals, airports and park-and-ride facilities) rather than residential areas, and a variety of different destinations were sampled. Sampling vehicles in these types of locations provides a higher probability that the vehicles captured in the survey are being driven on a regular basis (Younglove, et al. 2004).

WNT16 influences bone mineral density, cortical bone thickness, bone strength, and osteoporotic fracture risk

We aimed to identify genetic variants associated with cortical bone thickness (CBT) and bone mineral density (BMD) by performing two separate genome-wide association study (GWAS) meta-analyses for CBT in 3 cohorts comprising 5,878 European subjects and for BMD in 5 cohorts comprising 5,672 individuals. We then assessed selected single-nucleotide polymorphisms (SNPs) for osteoporotic fracture in 2,023 cases and 3,740 controls. Association with CBT and forearm BMD was tested for ~2.5 million SNPs in each cohort separately, and results were meta-analyzed using fixed effect meta-analysis. We identified a missense SNP (Thr>Ile; rs2707466) located in the WNT16 gene (7q31), associated with CBT (effect size of -0.11 standard deviations [SD] per C allele, P = 6.2×10-9). This SNP, as well as another nonsynonymous SNP rs2908004 (Gly>Arg), also had genome-wide significant association with forearm BMD (-0.14 SD per C allele, P = 2.3×10-12, and -0.16 SD per G allele, P = 1.2×10-15, respectively). Four genome-wide significant SNPs arising from BMD meta-analysis were tested for association with forearm fracture. SNP rs7776725 in FAM3C, a gene adjacent to WNT16, was associated with a genome-wide significant increased risk of forearm fracture (OR = 1.33, P = 7.3×10-9), with genome-wide suggestive signals from the two missense variants in WNT16 (rs2908004: OR = 1.22, P = 4.9×10-6 and rs2707466: OR = 1.22, P = 7.2×10-6). We next generated a homozygous mouse with targeted disruption of Wnt16. Female Wnt16-/- mice had 27% (P<0.001) thinner cortical bones at the femur midshaft, and bone strength measures were reduced between 43%-61% (6.5×10-13<P<5.9×10-4) at both femur and tibia, compared with their wild-type littermates. Natural variation in humans and targeted disruption in mice demonstrate that WNT16 is an important determinant of CBT, BMD, bone strength, and risk of fracture. © 2012 Zheng et al.

Histopathological features of bone regeneration in a canine segmental ulnar defect model

Background Today, finding an ideal biomaterial to treat the large bone defects, delayed unions and non-unions remains a challenge for orthopaedic surgeions and researchers. Several studies have been carried out on the subject of bone regeneration, each having its own advantages. The present study has been designed in vivo to evaluate the effects of cellular auto-transplantation of tail vertebrae on healing of experimental critical bone defect in a dog model. Methods Six indigenous breeds of dog with 32 ± 3.6 kg average weight from both sexes (5 males and 1 female) received bilateral critical-sized ulnar segmental defects. After determining the health condition, divided to 2 groups: The Group I were kept as control I (n = 1) while in Group II (experimental group; n = 5) bioactive bone implants were inserted. The defects were implanted with either autogeneic coccygeal bone grafts in dogs with 3-4 cm diaphyseal defects in the ulna. Defects were stabilized with internal plate fixation, and the control defects were not stabilized. Animals were euthanized at 16 weeks and analyzed by histopathology. Results Histological evaluation of this new bone at sixteen weeks postoperatively revealed primarily lamellar bone, with the formation of new cortices and normal-appearing marrow elements. And also reformation cortical compartment and reconstitution of marrow space were observed at the graft-host interface together with graft resorption and necrosis responses. Finally, our data were consistent with the osteoconducting function of the tail autograft. Conclusions Our results suggested that the tail vertebrae autograft seemed to be a new source of autogenous cortical bone in order to supporting segmental long bone defects in dogs. Furthermore, cellular autotransplantation was found to be a successful replacement for the tail vertebrae allograft bone at 3-4 cm segmental defects in the canine mid- ulna. Clinical application using graft expanders or bone autotransplantation should be used carefully and requires further investigation.

Determinants of the citation rate of medical research publications from a developing country

Background The number of citations received by an article is considered as an objective marker judging the importance and the quality of the research work. The present study aims to study the determinants of citations for research articles published by Sri Lankan authors. Methods Papers were selectively retrieved from the SciVerse Scopus® (Elsevier Properties S.A, USA) database for 10 years from 1st January 1997 to 31st December 2006, of which 50% were selected for inclusion by simple random sampling. The primary outcome measure was citation rate (defined as the number of citations during the 2 subsequent years after publication). Citation data was collected using the SciVerse Scopus® Citation Analyzer and self citations were excluded. A linear regression analysis was performed with ‘number of citations’ as the continuous dependent variable and other independent variables. Result The number of publications has steadily increased during the period of study. Over three quarter of papers were published in international journals. More than half of publications were research studies (55.3%), and most of the research studies were descriptive cross-sectional studies (27.1%). The mean number of citations within 2 years of publication was 1.7 and 52.1% of papers were not cited within the first two years of publication. The mean number of citations for collaborative studies (2.74) was significantly higher than that of non-collaborative studies (0.66). The mean number of citations did not significantly change depending on whether the publication had a positive result (2.08) or not (2.92) and was also not influenced by the presence (2.30) or absence (1.99) of the main study conclusion in the title of the article. In the linear regression model, the journal rank, number of authors, conducting the study abroad, being a research study or systematic review/meta-analysis and having regional and/or international collaboration all significantly increased the number of citations. Conclusion The journal rank, number of authors, conducting the study abroad, being a research study or systematic review/meta-analysis and having regional and/or international collaboration all significantly increased the number of citations. However, the presence of a positive result in the study did not influence the citation rate.

An electron microscopic study of quasicrystals in a quaternary alloy : Mg32(Al, Zn, Cu)49

The discovery of a solid exhibiting m 3 5 point group symmetry by Shechtman et. al. (l) in a rapidly solidified Al-14at%Mn alloy has activated intensive studies of a new class of solids, termed as quasicrystals (2). While the original discovery reported the existence of quasicrystals in AI-Mn. AI-Fe and AI-Cr alloys, subsequent work has revealed their existence in Mg-Zn-Al(3,4), Mg-A]-Cu(5), AI-Mn-Si(6) and Ti-Ni-V(7) alloys (Table l).

Estimating daily methane production in individual cattle with irregular feed intake patterns from short-term methane emission measurements

Spot measurements of methane emission rate (n = 18 700) by 24 Angus steers fed mixed rations from GrowSafe feeders were made over 3- to 6-min periods by a GreenFeed emission monitoring (GEM) unit. The data were analysed to estimate daily methane production (DMP; g/day) and derived methane yield (MY; g/kg dry matter intake (DMI)). A one-compartment dose model of spot emission rate v. time since the preceding meal was compared with the models of Wood (1967) and Dijkstra et al. (1997) and the average of spot measures. Fitted values for DMP were calculated from the area under the curves. Two methods of relating methane and feed intakes were then studied: the classical calculation of MY as DMP/DMI (kg/day); and a novel method of estimating DMP from time and size of preceding meals using either the data for only the two meals preceding a spot measurement, or all meals for 3 days prior. Two approaches were also used to estimate DMP from spot measurements: fitting of splines on a 'per-animal per-day' basis and an alternate approach of modelling DMP after each feed event by least squares (using Solver), summing (for each animal) the contributions from each feed event by best-fitting a one-compartment model. Time since the preceding meal was of limited value in estimating DMP. Even when the meal sizes and time intervals between a spot measurement and all feeding events in the previous 72 h were assessed, only 16.9% of the variance in spot emission rate measured by GEM was explained by this feeding information. While using the preceding meal alone gave a biased (underestimate) of DMP, allowing for a longer feed history removed this bias. A power analysis taking into account the sources of variation in DMP indicated that to obtain an estimate of DMP with a 95% confidence interval within 5% of the observed 64 days mean of spot measures would require 40 animals measured over 45 days (two spot measurements per day) or 30 animals measured over 55 days. These numbers suggest that spot measurements could be made in association with feed efficiency tests made over 70 days. Spot measurements of enteric emissions can be used to define DMP but the number of animals and samples are larger than are needed when day-long measures are made.

How do Australian podiatrists manage patients with diabetes The Australian diabetic foot management survey

Background Diabetic foot complications are the leading cause of lower extremity amputation and diabetes-related hospitalisation in Australia. Studies demonstrate significant reductions in amputations and hospitalisation when health professionals implement best practice management. Whilst other nations have surveyed health professionals on specific diabetic foot management, to the best of the authors’ knowledge this appears not to have occurred in Australia. The primary aim of this study was to examine Australian podiatrists’ diabetic foot management compared with best practice recommendations by the Australian National Health Medical Research Council. Methods A 36-item Australian Diabetic Foot Management survey, employing seven-point Likert scales (0 = Never; 7 = Always) to measure multiple aspects of best practice diabetic foot management was developed. The survey was briefly tested for face and content validity. The survey was electronically distributed to Australian podiatrists via professional associations. Demographics including sex, years treating patients with diabetes, employment-sector and patient numbers were also collected. Chi-squared and Mann Whitney U tests were used to test differences between sub-groups. Results Three hundred and eleven podiatrists responded; 222 (71%) were female, 158 (51%) from the public sector and 11–15 years median experience. Participants reported treating a median of 21–30 diabetes patients each week, including 1–5 with foot ulcers. Overall, participants registered median scores of at least “very often” (>6) in their use of most items covering best practice diabetic foot management. Notable exceptions were: “never” (1 (1 – 3)) using total contact casting, “sometimes” (4 (2 – 5)) performing an ankle brachial index, “sometimes” (4 (1 – 6)) using University of Texas Wound Classification System, and “sometimes” (4 (3 – 6) referring to specialist multi-disciplinary foot teams. Public sector podiatrists reported higher use or access on all those items compared to private sector podiatrists (p < 0.01). Conclusions This study provides the first baseline information on Australian podiatrists’ adherence to best practice diabetic foot guidelines. It appears podiatrists manage large caseloads of people with diabetes and are generally implementing best practice guidelines recommendations with some notable exceptions. Further studies are required to identify barriers to implementing these recommendations to ensure all Australians with diabetes have access to best practice care to prevent amputations.

Gravitational stresses in single span deep beams

A theoretical solution for the gravitational stresses in single span deep beams using Fourier series has been given. Numerical results for different span to depth ratios are given and these have been compared with the photoelastic results given by Saad and Hendry [1], and the finite difference results of Chow et al. [2,3].

The buoyant plume above a heat source

The boundary-layer type conservation equations of mass, momentum and energy for the steady free turbulent flow in gravitational convection over heat sources are set up for both two-dimensional and axisymmetric cases. These are reduced to ordinary differential equations in a similarity parameter by suitable transformations. The three classical hypotheses of turbulent diffusion-the Constant Exchange Coefficient hypothesis, Prandtl's Momentum Transfer theory and Taylor's Vorticity Transfer theory-are then incorporated into these equations in succession. The resulting equations are solved numerically and the results compared with some experimental results on gravitational convection over heat sources reported by Rouse et al.

Influencia de las condiciones del estrés salino sobre un cultivar resistente y un cultivar susceptible de Lotus tenuis al estado vegetativo

Resumen: Lotus tenuis es una leguminosa perenne, naturalizada en los campos bajos de la Cuenca del Salado. Es una especie alógama y presenta una alta variabilidad genética (Andrés A., and Rosso 2007), que le permite crecer y desarrollarse en distintas condiciones ambientales (Goldberg, E.E. et al 2010). Son pocas las especies de relevancia agrícola capaces de crecer bajo condiciones que combinan inundación y salinidad (Escaray 2007). Se ha demostrado la existencia de poblaciones de L. tenuis con diferentes niveles de tolerancia a distintos niveles de inundación y salinidad (Teakle, N.L. et al 2010; Striker et al. 2012). La tolerancia a la salinidad se define como la habilidad de una planta para crecer y completar su ciclo de vida en un medio que contiene altas concentraciones de sal. Debido a esto surgió mi interés por profundizar en el estudio de esta especie y su posible adaptación a suelos con problemas de salinidad. Se trabajo con dos familias de medios hermanos (FMH) de L. tenuis caracterizadas como tolerantes o susceptibles a salinidad provenientes del programa de mejoramiento genético del INTA Pergamino. Se utilizaron 550 plantas de cada genotipo que fueron sometidas a dos tratamientos salinos. Las plantas se colocaron de a cinco en macetas (20 cm. de diámetro) en invernáculo, se las dividió en: dosis 1 (9 repeticiones), fueron regadas con una solución 75mM de cloruro de sodio (NaCl), dosis 2 (9 repeticiones) regadas con una solución 150 mM NaCl, y un grupo testigo control para cada genotipo (4 repeticiones) regado sin NaCl. El tratamiento salino se aplicó durante 62 días hasta la aparición de la primera flor. Se determinó producción de biomasa de parte aérea (tallos mas hojas). También se determinó porcentaje de materia seca, por secado a 65ºC hasta peso constante de tallo más hojas, corona más raíz, longitud de tallo y raíz, y número de ramificaciones del tallo. Los resultados analizados muestran que la FMH 490 o tolerante posee mayor desarrollo en todas las variables analizadas y en todas las condiciones ensayadas excepto en longitud de raíz y corona. Pero, al sufrir el estrés los porcentajes de reducción en esta FMH que se observan son similares a los porcentajes de reducción observados en la FMH 2241 e incluso, para algunas variables el genotipo susceptible 2241 presentaba menores pérdidas frente al estrés recibido (MS por planta corona y raíz, Biomasa por planta corona y raíz, largo de tallo y Grs de tallo por planta.). El efecto de la salinidad fue igual o similar entre ambas isolíneas, por lo que la que presentaba mayor crecimiento produjo mayor biomasa en condiciones de estrés salino que la de menor crecimiento. La tolerancia al estrés salino fue similar en ambos genotipos, solo que una presentó más desarrollo que la otra. El análisis de las variables estudiadas mostró que en este ensayo el crecimiento de las plantas tiende a disminuir al aumentar la dosis de NaCl y que, a igualdad de dosis, los parámetros de crecimiento evaluados fueron mayores en el genotipo tolerante.

New tools for self-organised pattern formation

Position-dependent gene expression is a critical aspect of the development and behaviour of multicellular organisms. It requires a complex series of interactions to occur between different cell types in addition to intracellular signalling cascades. We used Escherichia coli to study the properties of an artificial signalling system at the interface between two expanding cell populations. We genetically engineered one population to produce a diffusible acyl-homoserine lactone (AHL) signal, and another population to respond to it. Our experiments demonstrate how such a signal can be used to reproducibly generate simple visible patterns with high accuracy in swimming agar. The producing and responding cassettes of two such signalling systems can be linked to produce a symmetric interface for bidirectional communication that can be used to visualise molecular logic. Intracellular feedback between these two cassettes would then create a framework for self-organised patterning of higher complexity. Adapting the experiments of Basu et al. (Basu et al., 2005) using cell motility, rather than a differential response to AHL concentrations as a way to define zones of response, we noted how the interaction of sender and receiver cell populations on a swimming plate could lead to complex pattern formation. Equipping highly motile strains such as E. coli MC1000 with AHL-mediated auto-inducing systems based on Vibrio fischeri luxI/luxR and Pseudomonas aeruginosa lasI/lasR cassettes would allow the amplification of a response to an AHL signal and its propagation. We designed and synthesised codon-optimised auto-inducing luxI/R and lasI/R cassettes as optimal gene expression is crucial for the generation of robust patterns. We still have to complete and test the entire genetic circuitry, although by modelling the system we were able to demonstrate its feasibility. © 2007 The Institution of Engineering and Technology.

Onset of Adiabatic Shear Instability in Strain Gradient Dependent Metal Matrix Composites

In this paper, effect of strain gradient on adiabatic shear instability in particle reinforced metal matrix composites is investigated by making use of the strain gradient dependent constitutive equation developed by Dai et al. [9] and the linear perturbation analysis presented by Bai [10]. The results have shown that the onset of adiabatic shear instability in metal matrix composites reinforced with small particles is more prone to occur than in the composites reinforced with large particles. This means that the strain gradient provides a strong deriving force for onset of adiabatic shear instability in metal matrix composites.

Evaluación del impacto de la implementación de prácticas de adaptación al cambio climático en 3 fincas del municipio de San Ramón, Matagalpa, Nicaragua

El presente estudio forma parte del trabajo conjunto del Centro Internacional de Agricultura Tropical (CIAT), el Programa de Investigación sobre Cambio Climático, Agricultura y Seguridad Alimentaria (CCAFS) y la Central de Cooperativas Cafetaleras del Norte (CECOCAFEN). Se identificaron las prácticas de adaptación al cambio climático que se están implementando en tres fincas del departamento de Matagalpa y se analizó el impacto de las mismas a nivel socioeconómico y ambiental. Según el estudio Tortillas en el Comal (TOR – por sus siglas en inglés), se espera un aumento en las temperaturas medias anuales (alrededor de 1° C en la década de 2020 y 2° C en la década de 2050). Las temperaturas mínimas y máximas diarias serán más altas. Habrá un déficit creciente del agua debido a una menor precipitación y altas tasas de evap otranspiración de las plantas (...) el déficit hídrico del suelo que va a empeorar el estrés por calor para las plantas, reducirá significativamente los rendimientos y representa una grave amenaza para la seguridad alimentaria. (Eitzinger et al., 2012). Sin embargo, se ha logrado determinar que las prácticas de adaptación al cambio climático implementadas por los productores han tenido un impacto positivo. A nivel social, la diversificación de los medios de vida permite el abastecimiento alimentario suficiente para contrarrestar la problemática de los meses de escasez en las zonas cafetaleras. A nivel económico, la cosecha de agua y las estrategias de alimentación de verano en bovinos aseguran la producción de lácteos y carnes aún en tiempo de sequía en las zonas ganaderas. Y, finalmente a nivel ambiental, se ha mejorado la calidad del suelo mediante el establecimiento de sistemas agroforestales en café y cacao y el uso de Canavalia ensiformis para la recuperación de suelos.

SEM and EDS Characterisation of Layering TiOx Growth onto the Cutting Tool Surface in Hard Drilling Processes of Ti-Al-V Alloys

10 p.

Respuesta bacteriana al estrés. Identificación de los factores celulares y moleculares que controlan la respuesta al estrés ambiental en bacterias autóctonas y alóctonas en los sistemas acuáticos

Poster presentado a la Rodríguez 1ª Jornadas de Investigación de la Facultad de Ciencia y Tecnología celebrada en Leioa del 21 a 23 de mayo de 2008.