A method for calculating the compliance of bonded-interfaces under shrinkage: Validation for Class I cavities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Blood pressure and lipid profile in young women: the role of anthropometric measurement

Body composition has fundamental importance in the quality of life and is a powerful predictor of mortality and morbidity in humans. The identification and monitoring of the amount of body fat have been receiving special attention in aspects related to health promotion, not just for its actions in the prevention and in the control of cardiovascular diseases but also for their induction and association with risk factors, especially in the plasmatic lipid levels and arterial pressure. It was investigated the relationship between body mass index (BMI) and body fat percentage (%BF) by bioelectrical impedance analysis (BIA) with the blood pressure levels (systolic and diastolic) and serum lipids (TC, HDL-c, LDL-c, VLDL-c, TG). In a group of fifty seven women (aged 18 to 26 years old ), obesity was detected in 5 and 19 women by BMI (≥ 30 kg/m2) and %BF (≥ 30%), respectively. BMI and % BF were positively correlated with blood pressure (systolic and diastolic), and highly significant in the obese group by %BF. Moreover, BMI and % BF were significantly correlated with all lipids and lipoprotein fractions VLDL-c and triglyceride, respectively. These results suggest that %BF is a good indicator of “occult obesity” in subjects with normal body mass index. The associated use of BMI and %BF to better evaluate obesity may improve the study of blood pressure levels and serum lipid changes that are commonly associated with obesity.

Arranjo fisico na montagem com fluxo continuo nas superficies de comando composto

Based on the fierce competitiveness of manufacturing companies and the planning problems arising from the lack of flexibility and forecasting demand, companies are increasingly looking to reflect on the most appropriate methods to manage its manufacture. Today it is possible to obtain higher gains and lower costs through very efficient tools, this paper uses action-research to model and implement the physical layout of a manufacturing cell, with strong theoretical basement returned to Lean Production System and acting systematically in flexibility in mounting. Through observation and joint action of the observer and staff can report problems that occurred during the phases of planning and implementation of improvements. With the improvement of the physical arrangement in the assembly was possible to obtain significant gains by reducing the production cycle, the manpower required, spending of non-compliance and increasing productivity, final product quality and health in the workplace

Vector Mode Analysis of Ring-Core Fibers: Design Tools for Spatial Division Multiplexing

Design tools have existed for decades for standard step-index fibers, with analytical expressions for cutoff conditions as a function of core size, refractive indexes, and wavelength. We present analytical expressions for cutoff conditions for fibers with a ring-shaped propagation region. We validate our analytical expressions against numerical solutions, as well as via asymptotic analysis yielding the existing solutions for standard step-index fiber. We demonstrate the utility of our solutions for optimizing fibers supporting specific eigenmode behaviors of interest for spatial division multiplexing. In particular, we address large mode separation for orbital angular momentum modes and fibers supporting only modes with a single intensity ring.

Collective screening tools for early identification of dyslexia

Current response to intervention models (RTIs) favor a three-tier system. In general, Tier 1 consists of evidence-based, effective reading instruction in the classroom and universal screening of all students at the beginning of the grade level to identify children for early intervention. Non-responders to Tier 1 receive small-group tutoring in Tier 2. Nonresponders to Tier 2 are given still more intensive, individual intervention in Tier 3. Limited time, personnel and financial resources derail RTI's implementation in Brazilian schools because this approach involves procedures that require extra time and extra personnel in all three tiers, including screening tools which normally consist of tasks administered individually. We explored the accuracy of collectively and easily administered screening tools for the early identification of second graders at risk for dyslexia in a two-stage screening model. A first-stage universal screening based on collectively administered curriculum-based measurements was used in 45 7 years old early Portuguese readers from 4 second-grade classrooms at the beginning of the school year and identified an at-risk group of 13 academic low-achievers. Collectively administered tasks based on phonological judgments by matching figures and figures to spoken words [alternative tools for educators (ATE)] and a comprehensive cognitive-linguistic battery of collective and individual assessments were both administered to all children and constituted the second-stage screening. Low-achievement on ATE tasks and on collectively administered writing tasks (scores at the 25th percentile) showed good sensitivity (true positives) and specificity (true negatives) to poor literacy status defined as scores <= 1 SD below the mean on literacy abilities at the end of fifth grade. These results provide implications for the use of a collectively administered screening tool for the early identification of children at risk for dyslexia in a classroom setting.

Development of a comprehensive method for analyzing clerodane-type diterpenes and phenolic compounds from Casearia sylvestris Swartz (Salicaceae) based on ultra high performance liquid chromatography combined with chemometric tools

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Different tools to trace geographic origin and seasonality of croaker (Micropogonias furnieri)

The aim of this study was to use proximate chemical composition, macro and trace elements, fatty acid profile and stable isotopes as traceability tools to assess geographic origin and seasonality of croaker (Micropogonicts fumieri). Croaker from Parnaiba contained higher ash in July and lower fat content than croaker from Santos. In contrast, croaker from Santos had statistically higher proportion of 16:1n-9+16:1n-7, 20:1n-11, 20:1n-9, MUFA and n-3/n-6 ratio than croaker from Parnaiba. Concerning seasonality, croaker caught in July had significantly higher amounts of 14:0, 15:0, 16:1n-9+16:1n-7 and saturated fatty acids than fish caught in December. Concerning elements, significant differences were also detected between seasons for Cl, Ca, Fe, Sr and S, whereas differences between geographic origins were only observed with K. delta C-13 and delta N-15 were statistically different between geographic origins, whereas differences between seasons were only detected in delta N-15 ratio of croaker from Santos. Fatty acids, minerals and stable isotope are effective methods to trace geographic origin and seasonality of croaker. Nonetheless, further investigation is still required with larger samples of croaker to enable the implementation of fatty acids, elements or stable isotope as authenticity tools by food control agencies. (C) 2014 Elsevier Ltd. All rights reserved.

Anthropometric indicators predict metabolic syndrome diagnosis in maintenance hemodialysis patients

Obesity has been considered the key in metabolic syndrome (MetS) development, and fat accumulation may be responsible for the occurrence of metabolic abnormalities in hemodialysis patients. The use of gold-standard methods to evaluate obesity is limited, and anthropometric measures may be the simplest methods. However, no study has investigated the association between anthropometric indexes and MetS in these patients. Therefore, the aim was to determine which anthropometric indexes had the best association and prediction for MetS in patients undergoing hemodialysis. Cross-sectional study that included patients older than 18 years, undergoing hemodialysis for at least 3 months. Patients with liver disease and cancer or those receiving corticosteroids or antiretroviral therapy were excluded. Diagnostic criteria from Harmonizing Metabolic Syndrome were used for the diagnosis of MetS. Anthropometric indexes evaluated were body mass index (BMI); percent standard of triceps skinfold thickness and of middle arm muscle circumference; waist circumference (WC); sagittal abdominal diameter; neck circumference; waist-to-hip, waist-to-thigh, and waist-to-height ratios; sagittal index; conicity index; and body fat percentage. Ninety-eight patients were included, 54.1% male, and mean age was 57.8 ± 12.9 years. The prevalence of MetS was 74.5%. Individuals with MetS had increased accumulation of abdominal fat and general obesity. Waist-to-height ratio was the variable independently associated with MetS diagnosis (odds ratio, 1.21; 95% confidence interval, 1.09-1.34; P < .01) and that better predicts MetS, followed by WC and BMI (area under the curve of 0.840, 0.836, and 0.798, respectively, P < .01). Waist-to-height ratio was the best anthropometric predictor of MetS in maintenance hemodialysis patients.

Avaliação do estado nutricional, ingestão proteica e qualidade de vida de indivúduos cirróticos com encefalopatia hepática

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anthropometric profile and upper-limbs strength of bull rider s competitors

A força de preensão manual tem sido relatada como determinante no desempenho de empunhadura em modalidades como lutas e escalada. Este estudo teve por propósito avaliar a aptidão de força isotônica máxima e de preensão manual em praticantes e não praticantes de montaria em touros, a fim de obter parâmetros de referência desta população. Foram avaliados 20 sujeitos em dois grupos, sendo 10 classificados como atletas de montaria e 10 não-atletas. A avaliação da força de preensão manual foi realizada em dinamômetro em posição convencional (DP) e específica (DE), com ambas as mãos (D e E). A força isotônica máxima foi determinada pelo teste de uma repetição máxima (1RM) e também foram obtidas medidas de circunferência dos segmentos, bem como a composição corporal por protocolo de dobras cutâneas. Os valores das variáveis foram comparados pelo teste-t (ρ ≤ 0,05) para dados independentes. As relações entre os valores de força e características antropométricas foram traçadas pelo coeficiente de Pearson. Os resultados para AMT em DPD (43.8±6.8 kgf), DPE (39.4±7.7 kgf), DED (44.9±5.6 kgf) e DEE (39.8±8.3 kgf) comparados aos apresentados por n-AMT em DPD (47.0±3.0 kgf), DPE (42.2±6.1 kgf), DED (49.2±1.5 kgf) e DEE (46.2±4.1 kgf) apresentaram diferenças apenas para DED e DEE. A força nos testes de 1RM (supino reto: 73.2±12.0 kg e 82.0±12.0 kg; rosca direta: 45.2±8.9 kg e 43.8±8.9 kg; tríceps pulley: 67.0±6.3 kg e 72.0±6.3 kg; e puxada posterior: 73.5±8.5 kg e 73.7±7.5 kg) não mostram diferenças entre os grupos. A influência sobre a dinamometria apresenta-se diferente entre os grupos, sendo relevante a força de flexão do cotovelo em AMT e a antropometria e força isotônica para n-AMT. Conclui-se que as características morfo-funcionais de membros superiores não demandam especificidade à montaria em touros.

Co-simulation tools for networked control systems: revision and utilization

Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.

Sistema de informação geográfica na formulação de indicadores ambientais para sustentabilidade dos recursos hídricos

Planning and sustainable management of water resources require actions that focuses on life quality, recovery and preservation of natural resources. As such, a municipality must have tools which empower the government with the right to exercise such actions, for example, the Master Plan and Sector Plans. To develop municipal plans which will guide the development of the city and provide information for establishment of public policies, it is of the utmost importance that they are designed based on primary and safe data. In view of these considerations, this study aimed at formulating environmental indicators by using a Geographic Information System – GIS. The environmental diagnosis based on the gvGIS was used as database, which made the process to be agile and accurate. The watershed of Lençóis River – SP was the study area. It has a good database from the Environmental Diagnosis of the watershed of Lençóis River, which was created through funds from the State Funds for Water Resources – FEHIDRO. The borrower was the Service of Water Supply and Sewage of Lençóis Paulista – SAAELP. Based on the diagnosis, the indicators were formulated concerning land use and occupation as well as water resources. The results were considered satisfactory and showed that the methodology used in this study is of great importance to evaluate water resources, as it provides a reliable basis for the decision-making process seeking environmental compliance and sustainable development. By using environmental indicators, the sustainability of an area as a whole can be analyzed, and the parts as well, i.e., it is possible to identify which sector is experiencing significant problems and take actions to solve them.

GIS-based analytical tools for transport planning: spatial regression models for transportation demand forecast

Considering the importance of spatial issues in transport planning, the main objective of this study was to analyze the results obtained from different approaches of spatial regression models. In the case of spatial autocorrelation, spatial dependence patterns should be incorporated in the models, since that dependence may affect the predictive power of these models. The results obtained with the spatial regression models were also compared with the results of a multiple linear regression model that is typically used in trips generation estimations. The findings support the hypothesis that the inclusion of spatial effects in regression models is important, since the best results were obtained with alternative models (spatial regression models or the ones with spatial variables included). This was observed in a case study carried out in the city of Porto Alegre, in the state of Rio Grande do Sul, Brazil, in the stages of specification and calibration of the models, with two distinct datasets.

As políticas públicas ambientais e a dinâmica do espaço rural no município de Araras (SP)

Historically the evolution of the occupation of ararense territory was due to the expansion of agricultural activities. Such activities were intensified with the transformations engendered by the Green Revolution, increasing the exploitation, the area occupied by agriculture and the deforestation and consequent environmental degradation. Therefore the current reality of rural areas in Araras/SP has shown that part of agricultural practices made it does not guarantee the effectiveness of environmental legislation and the sustainability of farms. Considering the recently implemented environmental policies, such as Law nº 12.651 / 2012, better known as New Forest Code and Decree nº 8.235 / 2014 establishing a period of one year to rural property registered with the Rural Environmental Registry (CAR), as tools targeting to reduce environmental degradation and contribute to building a sustainable rural development. This work aims to analyze the dynamics of the rural municipality of Araras on the environmental situation in some rural properties and actions to be taken by the owners to the full compliance of its properties before the environmental public policy

Análise de habitações sociais na perspectiva da ergonomia do ambiente construído: estudo de caso do PROMORE

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)