Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-based scaffolds for tissue engineering

Development and selection of an ideal scaffold is of importance for tissue engineering. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) is a biocompatible bioresorbable copolymer that belongs to the polyhydroxyalkanoate family. Because of its good biocompatibility, PHBHHx has been widely used as a cell scaffold for tissue engineering. This review focuses on the utilization of PHBHHx-based scaffolds in tissue engineering. Advances in the preparation, modification, and application of PHBHHx scaffolds are discussed.

Fat gain with physical detraining is correlated with increased glucose transport and oxidation in periepididymal white adipose tissue in rats

As it is a common observation that obesity tends to occur after discontinuation of exercise, we investigated how white adipocytes isolated from the periepididymal fat of animals with interrupted physical training transport and oxidize glucose, and whether these adaptations support the weight regain seen after 4 weeks of physical detraining. Male Wistar rats (45 days old, weighing 200 g) were divided into two groups (n=10): group D (detrained), trained for 8 weeks and detrained for 4 weeks; and group S (sedentary). The physical exercise was carried out on a treadmill for 60 min/day, 5 days/week for 8 weeks, at 50-60% of the maximum running capacity. After the training protocol, adipocytes isolated from the periepididymal adipose tissue were submitted to glucose uptake and oxidation tests. Adipocytes from detrained animals increased their glucose uptake capacity by 18.5% compared with those from sedentary animals (P<0.05). The same cells also showed a greater glucose oxidation capacity in response to insulin stimulation (34.55%) compared with those from the S group (P<0.05). We hypothesize that, owing to the more intense glucose entrance into adipose cells from detrained rats, more substrate became available for triacylglycerol synthesis. Furthermore, this increased glucose oxidation rate allowed an increase in energy supply for triacylglycerol synthesis. Thus, physical detraining might play a role as a possible obesogenic factor for increasing glucose uptake and oxidation by adipocytes.

Effect of bariatric surgery on adipose tissue distribution in severely obese patients

Background and aim: Bariatric surgery leads to sustain weight loss, improve metabolic and lipids profiles and ultimately leads to remission of type 2 diabetes (T2DM) in some obese individuals. The aim of the project is to evaluate the effect of bariatric on abdominal fat distribution in severely obese T2DM and non-T2DM obese patients. Study design and methods: A total of 23 morbidly obese subjects (mean ± SD body mass index 43.0 ± 3.6 kg/m2, age 46.5 ± 9.0 years) were recruited from the lager multicenter SLEEVEPASS studies (ClinicalTrials.gov/NCT00793143). 10 healthy age-matched non-obese individuals served as controls. The obese patients were studied before and 6 months after surgery. At baseline, there were 9 T2DMs and 14 non-diabetics. After surgery, there were 5 remitters and 4 nonremitters. Whole body magnetic resonance imaging including the abdominal regions was performed for the obese subjects before and 6 months after surgery and for the controls once. Abdominal fat were compartmentalized and analyzed. Results: At 6 months of follow-up, BMI in the obese decreased significantly (from 43 ± 4 to 33 ± 2 kg/m2, p < 0.001) with substantial improvement in whole body insulin sensitivity (from 12.2 ± 5.7 to 23.3 ± 8.1 µmol/kg/min, p < 0.001). Intraperitoneal fat mass decreased by 46% (from 3.4 ± 1.1 to 1.9± 1.0 kg, p < 0.001) more than the rest of the compartments. Abdominal visceral compartments in obese correlated with glycemic status independent of surgery. Pre-surgery posterior deep and intraperitoneal fat mass were better predictors of post-surgery glycemic status in obese. Remitters showed significant improvement in whole body insulin sensitivity (from 9.1 ± 2.1 to 20.9 ± 8.4 µmol/kg/min, p = 0.02), fasting glucose decreased significant only in nonremitters (from 7.1 ± 1.1 to 6.0 ± 0.8 mmol/l, p = 0.05) after surgery. There were no differences in extraperitoneal fat mass in remitters and superficial subcutaneous fat in non-remitters but all other compartments decreased significantly 6 months after the surgery Conclusion: Both deep subcutaneous and visceral fat are important contributors to glycemic status in obese subjects. Whereas visceral fat compartments are directly involved in T2DM, superficial subcutaneous may have offered protection against T2DM in obese subjects.

Weldability of high strength aluminium alloys

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Skeletal muscle fibre-type comparison of whole tissue and subcellular membrane phospholipids and fatty acids

Membranes are dynamic structures that affect cell structure and function. Compositional changes ofmembranes have been shown with the application of a perturbation; however these are limited to whole tissue analysis. The purpose of this thesis was to compare the phospholipid (PL) fatty acid (FA) composition of rat whole muscle (Wm) to 1) purified and non-purified subsarcolemmal (SS) mitochondria in soleus, plantaris, and red gastrocnemius, and 2) sarcolemma, transverse-tubules, SS and intermyofibrillar (IMF) mitochondria fix)m whole hindlimb. The major findings were that 1) contamination significantly altered the PL FA composition of the SS mitochondrial membrane fraction, 2) Wm and SS mitochondria compositions differed between muscle types, and 3) Wm did not accurately reflect the PL FA composition of any isolated subcellular membranes, with each being unique from each other. As such, the relevancy of the trends reported in the literature of the effects of perturbations on Wm may be limited.

An investigation into differences between indoleacetic acid and fusicoccin in their influence on RNA synthesis, protein synthesis and growth in Avena coleoptile tissue

Growth stimulation of Avena coleoptile tissue by indoleacetic acid (IAA) and fusicoccin (FC) was compared by measuring both their influence on RNA and protein synthesis during IAA or FC stimulated growth. FC stimulated growth more than IAA during the initial four hour exposure, after which the growth rate gradually declined to the control rate. FC, but not IAA, increased the uptake of 3H-Ieucine into tissue and the specific radioactivity of extracted protein. Cycloheximide inhibited the incorporation of 3H-Ieucine into protein by approximately 60% to 70% in all cases. In the presence of cycloheximide 3H-radioactivity accumulated in FC-treated tissue, whereas IAA did not seem to influence 3H-accumulation. These results suggest that FC stimulated leucine uptake into the tissue and that increased specific activity of coleoptile protein is due to increased leucine uptake, not an increased rate of protein synthesis. There was no measurable influence of IAA and/or FC on RNA and protein synthesis during the initial hours of a growth stimulation. Inhibitors of RNA and protein synthesis, actinomycin D and cycloheximide, respectively, severely inhibited IAA enhanced growth but only partially inhibited FC stimulated growth. The data are consistent with suggestions that a rapidly turning over protein participates in IAA stimulated growth, and that a continual synthesis of RNA and proteins is an absolute requirement for a long term growth response to IAA. On the contrary, FC-stimulated growth exhibited less dependency on the transcription and translation processes. The data are consistent with proposals suggesting different sites of action for FC and IAA stimulated growth. l?hen compared to CO2-free air, CO2 at 300 ppm had no significant influence on coleoptile growth and protein synthesis in the presence or absence of lAA or FC. Also, I mM malate, pH 6.0 did not influence growth of coleoptiles in the presence or absence of lAA. This result was obtained despite reports indicating that 300 ppm CO2 or I mM malate stimulates growth and protein synthesis. This lack of difference between CO2-treated and untreated tissue could indicate either that the interstitial space CO2 concentration is not actually different in the two treatments due to significant endogenous respiratory CO2 or else the data would suggest a very loose coupling between dark CO2 fixation and growth. IAA stimulated the in vivo fixation of 14c-bicarbonate (NaHI4c03) by about 25% and the addition of cycloheximide caused an inhibition of bicarbonate fixation within 30 min. Cycloheximide has also been reported to inhibit IAA-stimulated H+ excretion. These data are consistent with the acid growth theory and suggest that lAA stimulated growth involves dark CO2 fixation. The roles of dark CO2 fixation in lAA-stimulated growth are discussed.

Interlake Tissue Mills Fire Slides

The Interlake Tissue Mills storage location was at the intersection of Glendale and Merritt Street in Merritton. In the 1850s, the Beaver Cotton Mills (later Merritton Cotton Mills) was built. It was a frame building that burned down in 1881. A sandstone structure replaced the previous building. In 1906, the cotton mill closed and in 1912, the Independent Rubber Company took over the building. The mill was doubled in size. The rubber company remained there for ten years and then the building remained vacant until 1935. Interlake Tissue Mills acquired the building for storage purposes. A fire razed the larger of the plant’s buildings on Memorial Day weekend in 1961. After the fire, Domtar used the smaller building for storage for a short time. This is currently the site of the Keg Restaurant.

Analyse avantages-coûts de la réglementation visant l'accroissement du montant de consignation à 10¢ sur les contenants de boissons gazeuses composés d'aluminium.

Rapport de recherche

Étude critique de la densité électronique et des températures (excitation et ionisation) d'un plasma d'aluminium induit par laser

La caractérisation de matériaux par spectroscopie optique d’émission d’un plasma induit par laser (LIPS) suscite un intérêt qui ne va que s’amplifiant, et dont les applications se multiplient. L’objectif de ce mémoire est de vérifier l’influence du choix des raies spectrales sur certaines mesures du plasma, soit la densité électronique et la température d’excitation des atomes neutres et ionisés une fois, ainsi que la température d’ionisation. Nos mesures sont intégrées spatialement et résolues temporellement, ce qui est typique des conditions opératoires du LIPS, et nous avons utilisé pour nos travaux des cibles binaires d’aluminium contenant des éléments à l’état de trace (Al-Fe et Al-Mg). Premièrement, nous avons mesuré la densité électronique à l’aide de l’élargissement Stark de raies de plusieurs espèces (Al II, Fe II, Mg II, Fe I, Mg I, Halpha). Nous avons observé que les densités absolues avaient un comportement temporel différent en fonction de l’espèce. Les raies ioniques donnent des densités électroniques systématiquement plus élevées (jusqu’à 50 % à 200 ns après l’allumage du plasma), et décroissent plus rapidement que les densités issues des raies neutres. Par ailleurs, les densités obtenues par les éléments traces Fe et Mg sont moindres que les densités obtenues par l’observation de la raie communément utilisée Al II à 281,618 nm. Nous avons parallèlement étudié la densité électronique déterminée à l’aide de la raie de l’hydrogène Halpha, et la densité électronique ainsi obtenue a un comportement temporel similaire à celle obtenue par la raie Al II à 281,618 nm. Les deux espèces partagent probablement la même distribution spatiale à l’intérieur du plasma. Finalement, nous avons mesuré la température d’excitation du fer (neutre et ionisé, à l’état de trace dans nos cibles), ainsi que la température d’ionisation, à l’aide de diagrammes de Boltzmann et de Saha-Boltzmann, respectivement. À l’instar de travaux antérieurs (Barthélémy et al., 2005), il nous est apparu que les différentes températures convergeaient vers une température unique (considérant nos incertitudes) après 2-3 microsecondes. Les différentes températures mesurées de 0 à 2 microsecondes ne se recoupent pas, ce qui pourrait s’expliquer soit par un écart à l’équilibre thermodynamique local, soit en considérant un plasma inhomogène où la distribution des éléments dans la plume n’est pas similaire d’un élément à l’autre, les espèces énergétiques se retrouvant au cœur du plasma, plus chaud, alors que les espèces de moindre énergie se retrouvant principalement en périphérie.

Effect of hormone replacement therapy on retinal and optic nerve head blood flow and topography in postmenopausal women, and retinal tissue perfusion in ovariectomized rats

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

Impact of (pro)renin receptor deficiency in adipose tissue using a genetically engineered mouse model

La stimulation du récepteur de la rénine/prorénine [(P) RR], un membre récemment découvert du système rénine-angiotensine (SRA), augmente l'activité du SRA et des voies de signalisation angiotensine II-indépendante. Pour étudier l'impact potentiel du (P)RR dans le développement de l`obésité, nous avons émis l'hypothèse que les souris déficientes en (P)RR uniquement dans le tissus adipeux (KO) auront une diminution du poids corporel en ciblant le métabolisme du tissu adipeux, l'activité locomoteur et/ou la prise alimentaire. Ainsi, des souris KO ont été générées en utilisant la technologie Cre/Lox. Le gain de poids et la prise alimentaire ont été évalués hebdomadairement dans les mâles et femelles KO et de type sauvage (WT) pendant 4 semaines alors qu’ils étaient maintenu sur une diète normal. De plus, un groupe de femelles a été placé pour 6 semaines sur une diète riche en gras et en glucides (HF/HC). La composition corporelle et l'activité ambulatoire ont été évaluées par l’EchoMRI et à l’aide de cages Physioscan, respectivement. Les tissus adipeux ont été prélevés et pesés. De plus, les gras péri-gonadaux ont été utilisés pour le microarray. Finalement, le niveaux d'expression d'ARNm du (P)RR ont été évalués. Comme le gène du (P)RR est situé sur le chromosome X, les mâles étaient des KOs complets et les femelles étaient des KOs partielles. Les souris KO avaient un poids corporel significativement plus petit par rapport à WT, les différences étant plus prononcées chez les mâles. De plus, les femelles KOs étaient résistantes à l'obésité lorsqu'elles ont été placées sur la diète HF/HC et donc elles avaient significativement moins de masse grasse par rapport aux WTs. L’analyse histologique des gras péri-gonadaux des KOs nous ont dévoilés qu’il avait une réduction du nombre d'adipocytes mais de plus grande taille. Bien qu'il n'y ait eu aucun changement dans la consommation alimentaire, une augmentation de près de 3 fois de l'activité ambulatoire a été détectée chez les mâles. De plus, nous avons observé que leurs tibias étaient de longueur réduite ce qui suggère fortement l'affection de leur développement. Les gras péri-gonadaux des souris KO avaient une expression réduite de l`ABLIM2 (Actin binding LIM protein family, member 2) qui est associé avec le diabète de type II chez l'humain. Ainsi, les données recueillies suggèrent fortement que le (P)RR est impliquée dans la régulation du poids corporelle.

2D, 3D and 4D active compound delivery in tissue engineering and regenerative medicine

Recent advances in tissue engineering and regenerative medicine have shown that controlling cells microenvironment during growth is a key element to the development of successful therapeutic system. To achieve such control, researchers have first proposed the use of polymeric scaffolds that were able to support cellular growth and, to a certain extent, favor cell organization and tissue structure. With nowadays availability of a large pool of stem cell lines, such approach has appeared to be rather limited since it does not offer the fine control of the cell micro-environment in space and time (4D). Therefore, researchers are currently focusing their efforts on developing strategies that include active compound delivery systems in order to add a fourth dimension to the design of 3D scaffolds. This review will focus on recent concepts and applications of 2D and 3D techniques that have been used to control the load and release of active compounds used to promote cell differentiation and proliferation in or out of a scaffold. We will first present recent advances in the design of 2D polymeric scaffolds and the different techniques that have been used to deposit molecular cues and cells in a controlled fashion. We will continue presenting the recent advances made in the design of 3D scaffolds based on hydrogels as well as polymeric fibers and we will finish by presenting some of the research avenues that are still to be explored.

A physically based trunk soft tissue modeling for scoliosis surgery planning systems

One of the major concerns of scoliotic patients undergoing spinal correction surgery is the trunk's external appearance after the surgery. This paper presents a novel incremental approach for simulating postoperative trunk shape in scoliosis surgery. Preoperative and postoperative trunk shapes data were obtained using three-dimensional medical imaging techniques for seven patients with adolescent idiopathic scoliosis. Results of qualitative and quantitative evaluations, based on the comparison of the simulated and actual postoperative trunk surfaces, showed an adequate accuracy of the method. Our approach provides a candidate simulation tool to be used in a clinical environment for the surgery planning process.