Ultrasound-assisted extraction of R-phycoerythrin from Grateloupia turuturu with and without enzyme addition

The aim of this study was to compare two processes for the extraction of R-phycoerythrin (R-PE) from the red seaweed Grateloupia turuturu: ultrasound-assisted extraction (UAE) and ultrasound-assisted enzymatic hydrolysis (UAEH). Process efficiencies were both evaluated by the yield of R-PE extraction and by the level of liquefaction. Experiments were conducted at 40 and 22 °C, for 6 h, using an enzymatic cocktail and an original ultrasonic flow-through reactor. R-PE appeared very sensitive to temperature, thus 22 °C is strongly recommended for its extraction by UAEH or UAE. However, the higher processing temperature (40 °C) clearly increased the extraction of water-soluble compounds (up to 91% of liquefaction). These two new processes are thus promising alternatives for the extraction of water-soluble components including R-PE, from wet seaweeds, with extraction yields at least similar to conventional solid–liquid extraction.

Water Quality Impacts due to the Addition of Biosolids-Derived Compost to Bioretention

Bioretention is a common stormwater control measure (SCM). While compost, combined with other bioretention soil media (BSM), has the potential for increased pollutant and water uptake and storage, it also may leach harmful nutrients. Limited information is available on the use of compost in SCMs. Therefore, this project seeks to analyze the impacts of the addition of biosolids-derived compost to bioretention. To accomplish this, bioretention mesocosm column studies were conducted to determine the leaching effects of 15%, 30%, and 30% tap water-washed compost, mixed with standard BSM. Synthetic storm runoff was applied to the columns and the effluent was analyzed for total nitrogen (N), phosphorus (P), and their speciation. All three columns leached N and P with maximum total N concentrations of 2,200, 2,100, and 300 mg-N/L and total P concentrations of 12, 4.9, and 4.6 mg-P/L for the 30%, 15%, and 30% washed mesocosms, respectively. Therefore, based on this study, it is not recommended that biosolids-derived compost be added to bioretention media.

Platinum–rhodium–tin/carbon electrocatalysts for ethanol oxidation in acid media: effect of the precursor addition order and the amount of tin

Carbon-supported Pt x –Rh y –Sn z catalysts (x:y:z = 3:1:4, 6:2:4, 9:3:4) are prepared by Pt, Rh, and Sn precursors reduction in different addition order. The materials are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and are evaluated for the electrooxidation of ethanol in acidic media by cyclic voltammetry, chronoamperometry, and anode potentiostatic polarization. The influence of both the order in which the precursors are added and the composition of metals in the catalysts on the electrocatalytic activity and physico-chemical characteristics of Pt x –Rh y –Sn z /C catalysts is evaluated. Oxidized Rh species prevail on the surface of catalysts synthesized by simultaneous co-precipitation, thus demonstrating the influence of synthesis method on the oxidation state of catalysts. Furthermore, high amounts of Sn in composites synthesized by co-precipitation result in very active catalysts at low potentials (bifunctional effect), while medium Sn load is needed for sequentially deposited catalysts when the electronic effect is most important (high potentials), since more exposed Pt and Rh sites are needed on the catalyst surface to alcohol oxidation. The Pt3–Rh1–Sn4/C catalyst prepared by co-precipitation is the most active at potentials lower than 0.55 V (related to bifunctional effect), while the Pt6–Rh2–Sn4/C catalyst, prepared by sequential precipitation (first Rh and, after drying, Pt + Sn), is the most active above 0.55 V.

Effects of solid poly (ethylene glycols) addition to the solutions of aniline or N,N-dimethylaniline with water:experimental measurements and modelling

In this work, the liquid-liquid and solid-liquid phase behaviour of ten aqueous pseudo-binary and three binary systems containing polyethylene glycol (PEG) 2050, polyethylene glycol 35000, aniline, N,N-dimethylaniline and water, in the temperature range 298.15-350.15 K and at ambient pressure of 0.1 MPa, was studied. The obtained temperature-composition phase diagrams showed that the only functional co-solvent was PEG2050 for aniline in water, while PEG35000 even showed a clear anti-solvent effect in the N,N-dimethylaniline aqueous system. The experimental solid-liquid equilibria (SLE) data have been correlated by the non-random two-liquid (NRTL) model, and the correlation results are in accordance with the experimental results.

Influence of kaolin addition on the dynamics of oxygen mass transport in polyvinyl alcohol dispersion coatings

The permeability of dispersion barriers produced from polyvinyl alcohol (PVOH) and kaolin clay blends coated onto polymeric supports has been studied by employing two different measurement methods: the oxygen transmission rate (OTR) and the ambient oxygen ingress rate (AOIR). Coatings with different thicknesses and kaolin contents were studied. Structural information of the dispersion-barrier coatings was obtained by Fourier transform infrared spectroscopy (FTIR) spectroscopy and scanning electron microscopy (SEM). These results showed that the kaolin content influences both the orientation of the kaolin and the degree of crystallinity of the PVOH coating. Increased kaolin content increased the alignment of the kaolin platelets to the basal plane of the coating. Higher kaolin content was accompanied by higher degree of crystallinity of the PVOH. The barrier thickness proved to be less important in the early stages of the mass transport process, whereas it had a significant influence on the steady-state permeability. The results from this study demonstrate the need for better understanding of how permeability is influenced by (chemical and physical) structure.

ADDITION OF VINEGAR TO EXTEND THE SHELF-LIFE OF CABEÇA DE XARA

Cabeça de xara is a ready-to-eat meat product, whose production is very characteristic in Alentejo, a particular region of Portugal. It is a galantine usually moulded into parallelepiped shape made with various meats obtained from the Alentejano pig breed reared in the same region, namely deboned pork heads, tongue and connective tissue to which a number of condiments like salt, parsley, wine and pepper, are added. This work intended to test the feasibility of adding vinegar in order to increase the shelf-life of cabeça de xara, by reducing the contaminating microbiota responsible for spoilage, as well as controlling the pathogen Listeria monocytogenes. Three independent batches were produced and proximate composition, pH, aw, microbiological parameters and biogenic amines content evaluated. A sensory analysis was also performed throughout the storage period. No significant differences between control and vinegar samples was found regarding the proximate composition of cabeça de xara. As expected, pH is lower in the vinegar samples, however no differences in aw were observed between the two treatments. L. monocytogenes was present from the first month on only in one batch in the control treatment. However, it is inhibited by the addition of vinegar until the third month of storage, where L. monocytogenes is present but below the limit established in the 2073/2005 regulation. The presence of vinegar significantly decreased the content in biogenic amines, particularly cadaverine, putrescine and tyramine, throughout the storage period. Concerning sensory evaluation, no vinegar taste was reported by the panellists in a depreciating way.

The Effect of Level Testosteron e Addition in Diluents and Level Dilution on Speed Movement and Abnormality of Kedu Chicken Sperm

The research entitled “The Effect of Level Testosterone Addition in Diluents and Level Dilution on Speed Movement and Abnormality of Kedu Chicken Sperm” was conducted in Laboratory of Physiology and Reproduction, Faculty of Animal Science, UNSOED, started at August 15th to September 15th , 2001. The aims of  this research were to obtain influences of level testosterone and dilution on speed movement and secondary abnormality kedu chicken sperm and obtain interaction between the treatments. The tapped sperm from nine kedu chickens were used in this research. This Experiment was performed 4 x 3 Factorials with Randomized  Completely Block Design (RCBD) as the basic design. The treatment combinations were level testosterone 0, 300, 600 and 900 μg (t0, t1, t2 and t3) and level of dilution 4, 6 and 8 time (in a row p1, p2 and p3). The tapping period was replicated four times as a group (replicated) with two days interval. The result of this research showed that the interaction between level of testosterone addition and level of dilution gave a non-significant effect to speed movement sperm but significant to abnormality of kedu chicken sperm. The group gave a significant influence (P<0.05) to speed movement sperm and non significant to sperm abnormality. The interaction of level testosterone addition and level dilution of kedu chicken semen (T x P) has a quadratic regression to sperm abnormality with regression comparison is Y = 24.418 – 0.014 X +1.187E – 05 X², with peak point is (543.76: 20.23) of correlation coefficient (r) 0.55 and determination coefficient (R²) as 30.34%. The addition of 600 μg testosterone level with 6 level dilutions was the best to defend sperm abnormality. (Animal Production 4(2): 60-70 (2002) Key Words : Spermatozoa, Kedu Chicken, Testosterone, Dilution, Speed Movement and Abnormality

The Quail Response of Growth Period to Protein Level and Synthetic Methionine Addition in Ration

A research  has been conducted to study the effect of interaction between protein level and synthetic methionine addition in quail ration on growth rate up to 40 days. The method was used experiment with Factorial (3x3) based on CRD. The first factor was protein level (P) : P1 = 22 %, P2 = 24 %, P3 = 26 %. The second factor was methionine addition (M) : M0 = 0,00, M1 = 0,05 %, M2 = 0,10 %. Variance analysis indicated that protein level did not have significant effect (P>0.05) on feed consumption, growth rate, feed conversion, weight and percentage of carcass, but it had significant effect (P≤0.05) on IOFC. The effect of methionine addition was not significant (P> 0.05). Interaction between those treatments did not give significant effect (P>0.05). It can be concluded that the response on 26 % protein level with 0,05 % methionine addition give the highest IOFC (Rp. 342.693) (Animal Production 1(1) : 17-23 (1999). Key Words : Quail, Growing Periode, Protein Level, Synthetis Methionine.

Near-infrared spectroscopic study of basic aluminum sulfate and nitrate

The tridecameric Al-polymer [AlO4Al12(OH)24(H2O)12]7+ was prepared by forced hydrolysis of Al3+ up to an OH/Al molar ratio of 2.2. Under slow evaporation crystals were formed of Al13-nitrate. Upon addition of sulfate the tridecamer crystallised as the monoclinic Al13-sulfate. These crystals have been studied using near-infrared spectroscopy and compared to Al2(SO4)3.16H2O. Although the near-infrared spectra of the Al13-sulfate and nitrate are very similar indicating similar crystal structures, there are minor differences related to the strength with which the crystal water molecules are bonded to the salt groups. The interaction between crystal water and nitrate is stronger than with the sulfate as reflected by the shift of the crystal water band positions from 6213, 4874 and 4553 cm–1 for the Al13 sulfate towards 5925, 4848 and 4532 cm–1 for the nitrate. A reversed shift from 5079 and 5037 cm–1 for the sulfate towards 5238 and 5040 cm–1 for the nitrate for the water molecules in the Al13 indicate that the nitrate-Al13 bond is weakened due to the influence of the crystal water on the nitrate. The Al-OH bond in the Al13 complex is not influenced by changing the salt group due to the shielding by the water molecules of the Al13 complex.

How do customers of a financial services institution judge its communications

Communications are important for relationships within a marketing channel from both a theoretical and managerial perspective. Yet it is a problematic area for scholars. Thus, this research addresses the problem of how do customers of a financial services institution perceive communications with an ideal institution? This study's case research methodology used in-depth interviews with 34 carefully selected customers of a building society. The factors that make up customers' attitudes about corporate communications for an ideal financial services institution were identified and actual perceptions were compared against that ideal. The findings confirmed the importance of communications for customers in a relationship with a financial services provider and suggested communication priorities for customers in this context. In addition, the findings suggested sources of communication dissatisfaction for customers. These findings build upon the literature that speculates about customer perceptions of communications with organizations but provides little evidence to support hypotheses. The contributions arose from the emphasis on the customers' own attitudes and the patterns found within them.

Hydrazine-hydrate intercalated halloysite under controlled-rate thermal analysis conditions

The thermal behaviour of halloysite fully expanded with hydrazine-hydrate has been investigated in nitrogen atmosphere under dynamic heating and at a constant, pre-set decomposition rate of 0.15 mg min-1. Under controlled-rate thermal analysis (CRTA) conditions it was possible to resolve the closely overlapping decomposition stages and to distinguish between adsorbed and bonded reagent. Three types of bonded reagent could be identified. The loosely bonded reagent amounting to 0.20 mol hydrazine-hydrate per mol inner surface hydroxyl is connected to the internal and external surfaces of the expanded mineral and is present as a space filler between the sheets of the delaminated mineral. The strongly bonded (intercalated) hydrazine-hydrate is connected to the kaolinite inner surface OH groups by the formation of hydrogen bonds. Based on the thermoanalytical results two different types of bonded reagent could be distinguished in the complex. Type 1 reagent (approx. 0.06 mol hydrazine-hydrate/mol inner surface OH) is liberated between 77 and 103°C. Type 2 reagent is lost between 103 and 227°C, corresponding to a quantity of 0.36 mol hydrazine/mol inner surface OH. When heating the complex to 77°C under CRTA conditions a new reflection appears in the XRD pattern with a d-value of 9.6 Å, in addition to the 10.2 Ĺ reflection. This new reflection disappears in contact with moist air and the complex re-expands to the original d-value of 10.2 Å in a few h. The appearance of the 9.6 Å reflection is interpreted as the expansion of kaolinite with hydrazine alone, while the 10.2 Å one is due to expansion with hydrazine-hydrate. FTIR (DRIFT) spectroscopic results showed that the treated mineral after intercalation/deintercalation and heat treatment to 300°C is slightly more ordered than the original (untreated) clay.

The mechanical strength of phosphates under friction-induced cross-linking

Purpose: In the present study, we consider mechanical properties of phosphate glasses under high temperatureinduced and under friction-induced cross-linking, which enhance the modulus of elasticity. Design/methodology/approach: Two nanomechanical properties are evaluated, the first parameter is the modulus of elasticity (E) (or Young's modulus) and the second parameter is the hardness (H). Zinc meta-, pyro - and orthophosphates were recognized as amorphous-colloidal nanoparticles were synthesized under laboratory conditions and showed antiwear properties in engine oil. Findings: Young's modulus of the phosphate glasses formed under high temperature was in the 60-89 GPa range. For phosphate tribofilm formed under friction hardness and the Young's modulus were in the range of 2-10 GPa and 40-215 GPa, respectively. The degree of cross-linking during friction is provided by internal pressure of about 600 MPa and temperature close to 1000°C enhancing mechanical properties by factor of 3 (see Fig 1). Research limitations/implications: The addition of iron or aluminum ions to phosphate glasses under high temperature - and friction-induced amorphization of zinc metaphosphate and pyrophosphate tends to provide more cross-linking and mechanically stronger structures. Iron and aluminum (FeO4 or AlO4 units), incorporated into phosphate structure as network formers, contribute to the anion network bonding by converting the P=O bonds into bridging oxygen. Future work should consider on development of new of materials prepared by solgel processes, eg., zinc (II)-silicic acid. Originality/value: This paper analyses the friction pressure-induced and temperature–induced the two factors lead phosphate tribofilm glasses to chemically advanced glass structures, which may enhance the wear inhibition. Adding the coordinating ions alters the pressure at which cross-linking occurs and increases the antiwear properties of the surface material significantly.

Influence of host plant structure and microclimate on the abundance and behaviour of Tephritid fly

Microclimate and host plant architecture significantly influence the abundance and behavior of insects. However, most research in this field has focused at the invertebrate assemblage level, with few studies at the single-species level. Using wild Solanum mauritianum plants, we evaluated the influence of plant structure (number of leaves and branches and height of plant) and microclimate (temperature, relative humidity, and light intensity) on the abundance and behavior of a single insect species, the monophagous tephritid fly Bactrocera cacuminata (Hering). Abundance and oviposition behavior were signficantly influenced by the host structure (density of foliage) and associated microclimate. Resting behavior of both sexes was influenced positively by foliage density, while temperature positively influenced the numbers of resting females. The number of ovipositing females was positively influenced by temperature and negatively by relative humidity. Feeding behavior was rare on the host plant, as was mating. The relatively low explanatory power of the measured variables suggests that, in addition to host plant architecture and associated microclimate, other cues (e.g., olfactory or visual) could affect visitation and use of the larval host plant by adult fruit flies. For 12 plants observed at dusk (the time of fly mating), mating pairs were observed on only one tree. Principal component analyses of the plant and microclimate factors associated with these plants revealed that the plant on which mating was observed had specific characteristics (intermediate light intensity, greater height, and greater quantity of fruit) that may have influenced its selection as a mating site.