Caracterização de genes de reparo de DNA em cana-de-açúcar

Sugarcane is an important culture for Brazil that holds almost half of all worldwide productivity. Plants face many challenges, because of biotic and abiotic stresses presents in the production field, which could prevent plants from reaching their genetic potential. As consequence, those stresses can generate Reactive Oxygen Species – ROS – that can cause damages on DNA. Another consequence of stress is the early-flowering process, which contributes for a reduction on yield. In this context, the aim of this work is to characterize ScMUTM1 and ScMUTM2, two DNA glycosylases belonging to base excision repair pathway; and identify genes potentially related to stress and DNA repair in two sugarcane cultivars with contrasting flowering phenotypes. The characterization of the DNA glycosylases included the construction of vector to over express the recombinant proteins ScMUTM1 and ScMUTM2; they will be used in a near future to purification of these proteins and use in enzymatic assays. It was also made a phylogenetic reconstruction of this gene in plants and analysis of its promoter. With the phylogenetic analysis, it is possible to observe the presence of these genes grouped inside a branch with monocots and another one with dicots. This suggests that the duplication of this gene probably occurred after the separation of these two groups. The analysis of the promotor of MUTM shows of the presence of stress-related regulatory motifs at ScMUTM2 promoter, when compared with ScMUTM1. This may suggests that ScMUTM1 might be suffering sub functionalization process. After the analysis of microarrays data, it is observed an up-regulation from some stress-related genes in one of the conditions analyzed, related to early flowering process.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Foraminíferos como ferramenta de estudo na geologia ambiental do estuário do Rio Potengi e da plataforma interna, RN, Brasil

The Potengi River estuary has been affected by various anthropogenic factors over the years, as periodic dredging, industrial and domestic waste, traffic and other factors, causing various environmental disasters, including the notorious ecological accident in July 2007, which covered the municipalities of São Gonçalo do Amarante, Macaíba and Natal. Foraminifera serve as viable study tools in these environments; they are able to identify ecologically stressed environments, pointing out hydrographic changes and depositional environments in estuaries. The necessity to check the differences in environmental gradients in places anthropically impacted in Potengi River and adjacent inner shelf through species of foraminifera, and, the responses of these organisms to physical, chemical and geological factors is to provide baseline in the diagnosis of environments. The results show the dominance of opportunistic Ammonia tepida, Bolivina striatula, Quinqueloculina patagonica and Q. miletti especially in regions close to shrimp farms and Baldo Channel sewage in fine grain environments; and Q. lamarckiana indicates penetration of the saline waters in Potengi River. The occurrence of low-salinity tolerant foraminiferal species typical of mangrove environments as Trochammina inflata and T. squamata in Potengi River Channel suggest they probably could have been transported from mangrove area near the Potengi river mouth to the inner shelf regions. These findings suggest Potengi River is able to export mixohaline and mangrove organisms to inner shelf. Two distinct environments were observed, the outermost area is more influenced by marine influence and the innermost area is less influenced. Calcareous and agglutinated species dominate Potengi River, while mouth and inner shelf areas are dominated by calcareous, agglutinated and porcelaneous species, which are typical of highly saline and hydrodynamic environments and the contributive factors that controls foraminiferal distribution were balance of marine and freshwater currents, grain size, availability of CaCO3 and organic matter.

Foraminíferos como ferramenta de estudo na geologia ambiental do estuário do Rio Potengi e da plataforma interna, RN, Brasil

The Potengi River estuary has been affected by various anthropogenic factors over the years, as periodic dredging, industrial and domestic waste, traffic and other factors, causing various environmental disasters, including the notorious ecological accident in July 2007, which covered the municipalities of São Gonçalo do Amarante, Macaíba and Natal. Foraminifera serve as viable study tools in these environments; they are able to identify ecologically stressed environments, pointing out hydrographic changes and depositional environments in estuaries. The necessity to check the differences in environmental gradients in places anthropically impacted in Potengi River and adjacent inner shelf through species of foraminifera, and, the responses of these organisms to physical, chemical and geological factors is to provide baseline in the diagnosis of environments. The results show the dominance of opportunistic Ammonia tepida, Bolivina striatula, Quinqueloculina patagonica and Q. miletti especially in regions close to shrimp farms and Baldo Channel sewage in fine grain environments; and Q. lamarckiana indicates penetration of the saline waters in Potengi River. The occurrence of low-salinity tolerant foraminiferal species typical of mangrove environments as Trochammina inflata and T. squamata in Potengi River Channel suggest they probably could have been transported from mangrove area near the Potengi river mouth to the inner shelf regions. These findings suggest Potengi River is able to export mixohaline and mangrove organisms to inner shelf. Two distinct environments were observed, the outermost area is more influenced by marine influence and the innermost area is less influenced. Calcareous and agglutinated species dominate Potengi River, while mouth and inner shelf areas are dominated by calcareous, agglutinated and porcelaneous species, which are typical of highly saline and hydrodynamic environments and the contributive factors that controls foraminiferal distribution were balance of marine and freshwater currents, grain size, availability of CaCO3 and organic matter.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Um dermatam sulfato antitrombótico do camarão Litopenaeus vanammei inibe a inflamação e angiogênese

Inflammation is combined of a vascular and a cellular reaction, resulting in different cells and tissue responses, both the intravascular and extravascular environment. As the inflammatory process occurs, coagulation proteases, in particular thrombin (FIIa), are able to initiate various cellular responses in vascular biology and therefore is often observed activation of other biological systems, leading to complications during an event inflammatory, such as thrombosis and angiogenesis. Thus, antagonists molecules of these events are interesting models for the development of novel anti-inflammatory drugs. Thereby, it is worth stressing the glycosaminoglycans (GAGs), which are able to interact with several proteins involved in important biological processes, including inflammation and coagulation. Therefore, this study aimed to evaluate the anti-inflammatory, antithrombotic and anti-angiogenic potentials, as well anticoagulant of a dermatan sulfate-like GAG (DS) extracted from the Litopenaeus vannamei cephalotorax. The compound was obtained after proteolysis and purification by ion-exchange chromatography. After total digestion by DS-like compounds digesting lyases (chondroitinase ABC), the DS-like nature was revealed, and then called DSL. The shrimp compound showed reduced anticoagulant effect by the aPTT assay, but high anti-IIa activity, directly and through heparin cofactor II. On inflammation, the compound had a significant inhibitory effect with the reduction of proinflammatory cytokines. Potential Inhibitory were reported in the antithrombotic and anti-angiogenic assay, the latter being dose dependent. As for anti-hemostatic activity, the polysaccharides did not induced significant bleeding effect. Thus, the results shown by the shrimp DS-like compound indicate this glycosaminoglycan as a biotechnology target with prospects for the development of new multipotent drugs.

Caracterização funcional da BaltMTx, uma miotoxina isolada da peçonha de Bothrops alternatus

CHAPTER II: Snake venoms are a complex mixture of organic and inorganic compounds, proteins and peptides such as aminotransferases, acetylcholinesterase, hyaluronidases, L-amino acid oxidase, phospholipase A2, metalloproteases, serine proteases, lectins, disintegrins, and others. Phospholipase A2 directly or indirectly influence the pathophysiological effect on envenomation, as well as their participation in the digestion of the prey. They have several other activities such as hemolytic indirect action, cardiotoxicity, aggregating of platelets, anticoagulant, edema, myotoxic and inflammatory activities. In this work, we describe the functional characterization of BaltMTx, a PLA2 from Bothrops alternatus that inhibits platelet aggregation and present bactericidal effect. The purification of BaltMTx was carried out through three chromatographic steps (ion-exchange on a DEAE-Sephacel column, followed by hydrophobic chromatography on Phenyl–Sepharose and affinity chromatography on HiTrap™ Heparin HP). The protein was purified to homogeneity as judged by its migration profile in SDS–PAGE stained with coomassie blue, and showed a molecular mass of about 15 kDa under reducing conditions and approximately 25 kDa in non-reducing conditions. BaltMTx showed a rather specific inhibitory effect on platelet aggregation induced by epinephrine in human platelet-rich plasma in a dose-dependent manner, whereas it had little or no effect on platelet aggregation induced by collagen or adenosine diphosphate. BaltMTx also showed antibacterial activity against Staphylococcus aureus and Escherichia coli. High concentrations of BatlMTx stimulated the proliferation of Leishmania (Leishmania) infantum and Leishmania (Viania) braziliensis. BaltMTx induced production of inflammatory mediators such as IL-10, IL-12, TNF-α and NO. BaltMTx could be of medical interest as a new tool for the development of novel therapeutic agents for the prevention and treatment of thrombotic disorders as well as bactericidal agent.

Problemática nutricional en escolares de la Comunidad de Madrid

"Introducción y Objetivo" En los últimos años se han producido importantes cambios en los estilos de vida de la población y con ello en la alimentación de niños y adolescentes. El mayor desarrollo económico, el avance tecnológico alimentario y culinario, el seguimiento de hábitos alimentarios inadecuados, como por ejemplo no desayunar, la incorporación de la mujer al trabajo fuera del hogar, la nueva estructura familiar, la gran influencia de la publicidad y de la televisión, la incorporación más temprana de los niños a la escuela, junto con la mayor posibilidad de elegir sus menús sin una adecuada supervisión familiar, entre otras, condiciona un consumo de alimentos con elevado aporte calórico y baja calidad nutricional. Debido a lo anterior cada vez es más frecuente la presencia de obesidad y sobrepeso en la población escolar, así como la aparición de otras conductas del comportamiento alimentario y la ingesta insuficiente de algunos micronutrientes como el caso de la vitamina D, calcio, hierro, acido fólico, etc. Por otra parte, también es destacable el aumento de tabaquismo y del sedentarismo entre los jóvenes de nuestro país. Como consecuencia de lo anterior, se ha producido un aumento de problemas de salud entre nuestros niños y adolescentes, entre los que se encuentran las enfermedades cardiovasculares y el síndrome metabólico. Por todo lo anteriormente descrito, el objetivo de este trabajo fue conocer el estado nutricional de un colectivo de escolares españoles de la ciudad de Madrid. Material y Métodos Para conseguir datos, se agruparon los 21 distritos de Madrid Capital, en función de sus características socioeconómicas similares y buscando también que todas las zonas geográficas de Madrid queden representadas. Se constituyeron 5 grupos escogiendo al azar un distrito de cada grupo resultando al final los barrios de Carabanchel, Moratalaz, Chamberí, Villaverde y Fuencarral...

Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas

ALVES, Ana paula Melo. Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas. 2009. 124 f. Tese (Doutorado em Quimica) - Centro de Ciências Exatas e da Natureza, Universidade Federal da Paraíba, João Pessoa, PB, 2009.

Resíduos da indústria agro-alimentar como possíveis fontes de ácido ferúlico

A indústria agro-alimentar produz anualmente uma grande quantidade de subprodutos, ainda tratados como desperdício. A indústria cervejeira, em particular, está associada à produção de vários resíduos, entre os quais o bagaço de malte, também designado bagaço de cerveja ou dreche. Sendo produzida numa razão de 20 kg por cada 100 litros de cerveja, só na Ilha da Madeira a produção de dreche ultrapassa as 2000 toneladas/ano. O presente trabalho foi realizado com o intuito de estudar a utilização da dreche como material de partida para a extracção de ácido ferúlico, um ácido hidroxicinâmico com elevada bioactividade e aplicações. A caracterização físico-química da dreche permitiu determinar um teor de humidade de aproximadamente 70% e um teor de cinzas de cerca de 3,6%. A distribuição granulométrica da dreche seca, revelou que cerca de 70% das partículas que a constituem têm dimensão entre 1 e 0,25 mm. A extracção com acetona produziu um extracto contendo 5 compostos de natureza fenólica, determinados por LC-MS. A hidrólise alcalina – uma das técnicas que permitem a extracção de compostos como o ácido ferúlico a partir de matrizes lenhocelulósicas – foi estudada em amostras de dreche submetidas a tratamento prévio. O pré-tratamento com ácido diluído demonstrou ser eficiente na extracção do ácido ferúlico a partir da dreche. A extracção em autoclave mostrou ser eficiente na extracção do ácido ferúlico [0,28% (m/m)] e uma simplificação do procedimento posterior à reacção de hidrólise alcalina fez aumentar o rendimento de extracção em cerca de 84%, comparativamente ao procedimento habitual. As condições óptimas de hidrólise alcalina em tubos autopressurizados aconteceram a 120 ºC, por 1,5 horas, num rácio de 20 mL/g e NaOH (1,5%). O processo de purificação do ácido ferúlico extraído por adsorção numa resina sintética resultou em percentagens de adsorção de 90,83% e de dessorção em torno dos 68,70%.

Studio di membrane a base di liquidi ionici per il trasporto facilitato di CO2

In questo lavoro viene effettuata un’analisi di membrane per la separazione di CO2 basate sul meccanismo di trasporto facilitato. Queste membrane sono caratterizzate da un supporto poroso impregnato di una fase liquida le cui proprietà chimico-fisiche vengono presentate in relazione alle performance di separazione fornite: si tratta di liquidi ionici che presentano gruppi funzionali in grado di reagire con la CO2 consentendo il trasporto facilitato del gas acido attraverso la membrana. Le prestazioni in termini di separazione di CO2 da miscele gas fornite da questa tecnologia vengono analizzate e confrontate con quelle offerte da altre tipologie di membrane: alcune basate sul meccanismo di solution-diffusion (membrane polimeriche e membrane impregnate di liquidi ionici room-temperature) ed altre caratterizzate da permeazione di CO2 con presenza di reazione chimica ottenuta mediante facilitatori (mobili o legati allo scheletro carbonioso del polimero costituente la membrana). I risultati ottenuti sono analizzati in merito alla possibile implementazione di tale sistema di separazione a membrana in processi di cattura di CO2 nell'ambito della tecnologia di Carbon Capture and Storage.

Studio e validazione sperimentale di un nuovo sistema per ultrafiltrazione in emodialisi

La dialisi, le cui basi sono state fondate a metà ottocento dal chimico Thomas Graham, è la terapia, alternativa al trapianto, utilizzata su pazienti affetti da insufficienza renale. Ad oggi tale terapia ha un numero sempre maggiore di utilizzatori, più di 2,5 milioni di persone al mondo, ragione per cui ha un impatto sempre più grande sul sistema sanitario. La terapia, ha come scopo principale quello ripristinare gli equilibri idro-elettrolitico e acido-base del sangue del paziente utilizzando principi quali ultrafiltrazione, convezione e diffusione. Per raggiungere questo obiettivo, il sangue del paziente viene fatto scorrere controcorrente al liquido di dialisi, di composizione nota, ai capi di una membrana semipermeabile. Nel caso dell’emodialisi tutto il processo si svolge in circolazione extracorporea. La dialisi viene eseguita quando i reni del paziente non riescono più a espletare la loro funzione, con conseguente accumulo di tossine e di liquidi, che nel giro di pochi giorni porterebbe alla morte se non si interviene. Data la sua funzione, una parte importante della macchina che esegue l’emodialisi, è il sistema di controllo dell’ultrafiltrazione, che permette di rimuovere in maniera controllata i liquidi che il paziente non riesce a smaltire in maniera autonoma. La rimozione di liquidi avviene mediante la creazione di un gradiente pressorio tra il lato sangue e il lato dializzato, che causa il passaggio di liquidi da una parte all’altra della membrana semipermeabile. Esistono vari metodi che permettono di realizzare questo processo, che si differenziano per la strategia utilizzata per creare i gradienti pressori; ognuno dei quali permette di ottenere una determinata accuratezza. Scopo del mio lavoro di tesi è stato quello di studiare e validare un nuovo sistema di realizzazione e controllo dell’ultrafiltrazione.

Hyaluronic acid as neuropathic ulcer treatment: a case report

The prevalence of diabetic polyneuropathy in Spain is 22% increasing with age, standing at less than 5% in patients between 15 and 19 years and reaching 29.8% in those aged 70 to 74 years age. Infection is an important complication in Diabetic Foot, frequently associated with minor amputation and even lower extremity amputation. The study presents a clinical case of a 68-year-old man who consulted for a diabetic foot ulcer in the metatarseal area of the right foot, diagnosed two years ago and without healing success. An exploration protocol of the diabetic food was made. Afterwards, a surgical debridement was done and a cure procedure with pure hyaluronic acid, a bandage and foot unloading was followed. After 69 days of treatment, a complete ulcer healing was achieved. After the injure healing, a biomechanical exploration was made and a plantar support was produced to avoid the reappearance of the injury because of local hyperpressure.