Mortality and movement of Yellowtail Flounder (Limanda ferruginea) tagged off New England

From 2003 to 2006, 44,882 Yellowtail Flounder (Limanda ferruginea) were captured and released with conventional disc tags in the western North Atlantic as part of a cooperative Yellowtail Flounder tagging study. From these releases, 3767 of the tags were recovered. The primary objectives of this tagging program were to evaluate the mortality and large-scale movement of Yellowtail Flounder among 3 stock areas in New England. To explore mortality, survival and recovery rate were estimated from traditional Brownie tag-recovery models fitted to the data with Program MARK. Models were examined with time and sex-dependent parameters over several temporal scales. The models with a monthly scale for both survival and recovery rate had the best overall fit and returned parameter estimates that were biologically reasonable. Estimates of survival from the tag-recovery models confirm the general magnitude of total mortality derived from age-based stock assessments but indicate that survival was greater for females than for males. In addition to calculating mortality estimates, we examined the pattern of release and recapture locations and revealed frequent movements within stock areas and less frequent movement among stock areas. The collaboration of fishermen and scientists for this study successfully resulted in independent confirmation of previously documented patterns of movement and mortality rates from conventional age-based analyses.

Observations on the mating behavior, spawn mass and larval development of Hydatina physis Linne, 1758 (Cephalaspidea: Hydatinidae) from Karachi

Reproduction of Hydatina physis was studied in a population from Karachi, Pakistan, including mating and egg laying behavior, spawn characteristics and development.Individuals first appear in the field in October and remain until March. The spawning occurs from mid-November till mid-February with a peak in December. During this period the individuals were also observed pairing. In captivity, mating lasts for 30 minutes, second mating occurs two days later. Oviposition occurs in a very interesting and unusual manner. The mother turns "up-side-down" with its food fully expanded and the shell completely hidden underneath, the expanded foot serves as protective cover to the eggs. Eggs are deposited in a complexly folded mass with a short stem and an adhesive disc. Capsules, arranged in a single layer, contain 4-6 eggs each of wich is 70 um in diameter. Development is planktotrophic and veligers hatch after 14 days at a temperature of 26-28 degrees Celsius.

INFLUENCE OF ATMOSPHERIC HUMIDITY ON THE ABRASIVE WEAR OF METALS.

A pin-on-disc apparatus has been used to obtain continuous simultaneous measurements of the wear and friction (sliding force) behaviour of metals on bonded silicon carbide abrasive paper under conditions of controlled humidity. Iron, mild steel, and copper exhibit qualitatively similar wear behaviour; the wear rate decreases progressively with the number of passes over the same track. In contrast, the wear rate of titanium remains constant. Variation in atmospheric humidity has little effect on the wear rates of copper or titanium, although a slight effect was found in mild steel and iron. Refs.

INFLUENCE OF ATMOSPHERIC COMPOSITION ON THE ABRASIVE WEAR OF TITANIUM AND Ti-6Al-4V.

A pin-on-disc apparatus has been used to investigate the wear and friction (sliding force) behavior of metals on bonded silicon carbide and alumina papers under conditions of controlled atmospheric composition. The wear rates of both commercial purity titanium and the alloy Ti-6%Al-4%V tested in air were found to remain constant with time, in contrast with the behavior of other metals tested under similar conditions, which exhibited a progressive decrease in wear rate with increasing number of passes along the same track. It is proposed that the concentration of interstitial nitrogen and oxygen in the worn metal surface, which largely determines its mechanical properties, strongly influences both the ductility of the abraded material and the force of adhesion between the metal and the abrasive particles. Parallels are drawn between abrasive wear and machining to illustrate the importance of oxygen at the interface between workpiece and tool surfaces.

Abrasive wear of steel during rolling-sliding contact with rock counterfaces

In many mining operations (e.g. excavation, drilling, tunnelling, rock crushing) metallic components are forced against abrasive rocks in a complex motion. This study examines the relative importance of combined rolling and sliding motion in the two-body abrasive wear of a low carbon tempered martensitic steel against rock counterfaces. A novel wear test rig has been used to vary the amount of rolling and sliding motion between a rotating steel cylinder and a counter-rotating sandstone (highly abrasive) or limestone (much less abrasive) disc. Weight-loss measurements reveal that the wear rate of the steel increases as the amount of motion against the rock counterface is reduced from pure sliding to approximately 50% sliding (and approximately 50% rolling). Scanning electron microscopy shows that when the amount of motion is reduced from pure sliding to approximately 50% sliding the topographical and sub-surface physical properties of the worn steel and rock surfaces are modified.

The influence of water-miscible solvents on the permeability of clay

Centrifuge tests were carried out to determine the effect of 5 different water-soluble chemicals on a thin consolidated disc of clay. The evolution of changes in the clay permeability with time was investigated and other structural changes due to chemical attack were monitored. The findings presented here demonstrate that the permeability of the clay appear to be generally related to the polarity of the chemicals and the dielectric constant, with the exception of Butanol. In the case of Butanol at low flow rate and low stress level, the action of the chemical caused the clay to crack, with a consequent large increase in flow.

Bi-annual environment monitoring technical report for the SON cage fish culture site at Bugungu, Napoleon Gulf, northern Lake Victoria, December 2012

The first year-round quarterly surveys were completed for the year 2011. For the year 2012, SON management decided to change the frequency of the surveys from quarterly to biannual and the first such survey, was undertaken in June 2012. The second survey was undertaken in December 2012 and is the subject of this report: Results/observations made are presented in this technical report along with a scientific interpretation and discussion of the results with reference to possible impacts of the cage facilities to the water environment and aquatic biota. SON cage study sites were coded as downstream of cages (DSC), within cages (WIC) and upstream of cages (USC). Physical-chemical parameters (water column temperature, dissolved oxygen, pH, conductivity, were measured in-situ with a pre-calibrated hydrolab at each site. A digital Echo Sounder was used to determine the total water column depth at each site. A black and white Secchi disc was used to determine water column transparency. Coordinate locations were determined with a GPS device.

A novel measurement of dynamic friction

A tribometer, based on a pin-on-disc machine, uses a PZT drive to produce small sinusoidal fluctuations of sliding speed. The frequency and amplitude of these fluctuations can be controlled, and the dynamic response measured. Preliminary test results show that the dynamic friction variation is influenced by the contact materials, normal force, oscillation frequency and steady sliding speed. The variation of friction force amplitude and phase with frequency gives clues about the underlying state variables determining the friction. Modelling studies illustrate the expected behaviour for idealized friction laws governed by, for example, sliding speed, contact temperature, and "rate-state" laws. © 2008 SAE International.

Observation on some of the environmental parameters and feed quality of selected golda (Macrobrachium rosenbergii) farms in Bangladesh

A study was conducted to ascertain the existing farm water, effluent and feed quality of selected giant freshwater prawn farms from major prawn farming areas (Bagerhat Sadar, Noakhali Sadar and Mymensingh) of Bangladesh during July to November 2005. Water quality parameters such as the mean values of dissolved oxygen, alkalinity, nitrite-nitrogen, phosphate-phosphorus and ammoniacal nitrogen did not show any significantly differences among the farming areas. Whereas significant differences (p < 0.05) were observed in the mean values of temperature, secchi disc visibility, pH and chlorophyll a. However, all the water quality parameters in the farming areas were within the suitable range for prawn culture. There was no significant variation in nutrients concentration of discharged effluent among the prawn farming areas. All of the nutrients measured in effluent water were within the acceptable range and did not seem to pose a direct threat to the recipient environment. The analysed crude protein contents of commercial CP, Quality and Saudi-Bangla prawn feeds were 31.84%, 27.21% and 28.97%, respectively, whereas all analysed farm made feeds were less than 25%. The other nutrients of prawn feeds varied largely with the source of feeds and ingredients used to prepare feed. The annual yield of prawn varied from 320.4 to 512.6 kg/ha (mean 412.3 kg/ha) depending on the management system.

A practical demonstration of scalable, parallel mesh generation

Cambridge Flow Solutions Ltd, Compass House, Vision Park, Cambridge, CB4 9AD, UK Real-world simulation challenges are getting bigger: virtual aero-engines with multistage blade rows coupled with their secondary air systems & with fully featured geometry; environmental flows at meta-scales over resolved cities; synthetic battlefields. It is clear that the future of simulation is scalable, end-to-end parallelism. To address these challenges we have reported in a sequence of papers a series of inherently parallel building blocks based on the integration of a Level Set based geometry kernel with an octree-based cut-Cartesian mesh generator, RANS flow solver, post-processing and geometry management & editing. The cut-cells which characterize the approach are eliminated by exporting a body-conformal mesh driven by the underpinning Level Set and managed by mesh quality optimization algorithms; this permits third party flow solvers to be deployed. This paper continues this sequence by reporting & demonstrating two main novelties: variable depth volume mesh refinement enabling variable surface mesh refinement and a radical rework of the mesh generation into a bottom-up system based on Space Filling Curves. Also reported are the associated extensions to body-conformal mesh export. Everything is implemented in a scalable, parallel manner. As a practical demonstration, meshes of guaranteed quality are generated for a fully resolved, generic aircraft carrier geometry, a cooled disc brake assembly and a B747 in landing configuration. Copyright © 2009 by W.N.Dawes.

Water quality of two semi-closed areas in the United Arab Emirates Coast along the Arabian Gulf:a comparative study

A comparative study was carried out between the two biggest creeks along the Arabian Gulf coast of the United Arab Emirates to evaluate impacts of sewage and industrial effluents on their hydrochemical characteristics. Surface and bottom water samples were collected from Abu Dhabi and Dubai creeks during the period from October 1994 to September 1995. The hydrochemical parameters studied were: temperature (21.10-34.00°C), salinity (37.37-47.09%), transparency (0.50-10.0 m), pH (7.97-8.83), dissolved oxygen (1.78-13.93 mg/l) and nutrients ammonia (ND- 13.12,ug-at N/1), nitrite (ND-6.66 ,ug-at N/1), nitrate (ND- 41.18 ,ug-at N/1), phosphate (ND- 13.06 ,ug-at P/1), silicate (0.68-32.50 ,ug-at Si/1), total phosphorus (0.26- 21.48 ,ug-at P/1), and total silicon (0.95- 40.32 ,ug-at Si/1). The present study indicates clearly that seawater of Abu-Dhabi Creek was warmer (28.l2°C) than Dubai (27.56°C) resulting in a higher rate of evaporation. Owing to more evaporation, salinity levels showed higher levels at Abu Dhabi (43.33%) compared to Dubai (39.03%) seawater. The study also revealed higher secchi disc readings at Abu Dhabi Creek (4.68 m) as compared to Dubai Creek (2.60 m) suggesting more transparency at Abu Dhabi Creek. Whereas, seawater of Dubai exhibited higher levels of pH (1.03 times), and dissolved oxygen (1.05 times) than Abu Dhabi seawater due to an increase in productivity. Meantime, seawater of Dubai showed higher tendency to accumulate ammonia (8.22 times), nitrite (10.93 times), nitrate (5.85 times), phosphate (10.64 times), silicate (1.60 times), total phosphorus (3.19 times), and total silicon (1.54 times) compared to Abu Dhabi seawater due to the enrichment of seawater at Dubai with domestic sewage waters which has distinctly elevated the levels of the nutrient salts particularly in inner-most parts of the creek leading to eutrophication signs. The changes occurred in the receiving creek water of Dubai as a result of waste-water disposal that have also reflected on the atomic ratios of nit: Effect of pollution rogen: phosphorus: silicon.

The frequency response of dynamic friction: Model comparisons

Any linearised theory of the initiation of friction-excited vibration via instability of the state of steady sliding requires information about the dynamic friction force in the form of a frequency response function for sliding friction. Recent measurements of this function for an interface consisting of a nylon pin against a glass disc are used to probe the underlying constitutive law. Results are compared to linearised predictions from the simplest ratestate model of friction, and a ratetemperature model. In both cases the observed variation with frequency is not compatible with the model predictions, although there are some significant points of similarity. The most striking result relates to variation of the normal load: any theory embodying the Coulomb relation F∝N would predict behaviour entirely at variance with the measurements, even though the steady friction force obtained during the same measurements does follow the Coulomb law. © 2011 Elsevier Ltd. All rights reserved.

Trophic State Index, morphoedaphic index and fish yield prediction in a sub-tropical lake, Manchar (Sindh), Pakistan

Limnological factors of a sub-tropical lake Manchar were studied on seasonal basis. The mean values of various parameters were: transparency, (secchi disc reading): 90.5 cm, Orthophosphate: 0.257 mg/l, TDS: 3310,5 mg/l, Conductivity: 5232 µs/l, Total Chlorophyll (Planktonic): 31.3 µg/l Planktonic biomass: 5466 µg/l. Trophic state index (TSI) was calculated by using Carlson's (1977) equations. Mean TSI for transparency was 61, while for orthophosphate and chlorophyll, it was 82 and 64 respectively. TSI values indicate advanced eutrophic state of Manchar Lake. Morphoedaphic index (MEI) was also calculated on seasonal basis. The mean values were, TDS: 1103, conductivity: 1744, alkalinity: 60, transparency: 29 and biomass (plankton dry weight): 1746. Fish yield prediction for Manchar Lake (Z =3m, mean area=100 km²) was calculated by using MEI values. The results were quite different among various parameters. Conductivity (89.1mt/y), biomass (67.6 mt/y) and TDS (44.6 mt/y) were found to be good predictors of fish yield. Chlorophyll, transparency and alkalinity values gave very low estimate.

Identification and distribution of cartilaginous fishes of the Persian Gulf (Bushehr Province waters)

Class Condrichthyes consist of two sub-classes: Holocehali and. Elasmobranchii, the second one are more divers and has more importance. Selachimorpha (sharkes) and Batidoidimorpha (rays and skates) are two super-order of Elasmobranchii, which they have crucial role in ecological balance in marine ecosystmes. Except few cases, most of sharks and rays (rays and skates) are not well identified, so a lot of works need to be done in this regards. The area of study is located between 49°, 35' and 52°, 33' E and between 27°, 21' and 30°, 02' N in depth of 7 to 78 in. Study were conducted diuring August 1998, September 1999. Samples were taken during 3 sea cruises from 70 bottom trawl net. All sharks and batoid fishes were identified based on biometric specifications (weight, total, length and sexuality for both group and extra biometric specifications, disc width, disc length, and tail length only for, batoid fishes). The 1140 specimens of batoid fishes identified belonged to 6 families, and 18 species. 3 new species were identified, they are Himantura sp.1 and Himantura sp.2 belonged to Dasyatidae family and Rhinobatos sp. belonged to Rhinobatidae Familiy. It needs more works and more adaquate ducuments for cl.earfing scientific names of these species. The 275 specimens of sharks identified belonged to 6 families and 10 species. Chiloscyllium sp. belonged to Hemiscylliidae, family as a new species was identified.

Composite hydrogels for nucleus pulposus tissue engineering

Tissue engineering offers a paradigm shift in the treatment of back pain. Engineered intervertebral discs could replace degenerated tissue and overcome the limitations of current treatments, which substantially alter the biomechanical properties of the spine. The centre of the disc, the nucleus pulposus, is an amorphous gel with a large bound water content and it can resist substantial compressive loads. Due to similarities in their compositions, hydrogels have frequently been considered as substitutes for the nucleus pulposus. However, there has been limited work characterising the time-dependent mechanical behaviour of hydrogel scaffolds for nucleus pulposus tissue engineering. Poroelastic behaviour, which plays a key role in nutrient transport, is of particular importance. Here, we investigate the time-dependent mechanical properties of gelatin and agar hydrogels and of gelatin-agar composites. The time-dependent properties of these hydrogels are explored using viscoelastic and poroelastic frameworks. Several gel formulations demonstrate comparable equilibrium elastic behaviour to the nucleus pulposus under unconfined compression, but permeability values that are much greater than those of the native tissue. A range of time-dependent responses are observed in the composite gels examined, presenting the opportunity for targeted design of custom hydrogels with combinations of mechanical properties optimized for tissue engineering applications. © 2011 Elsevier Ltd.