Low expression of sodium iodide symporter identifies aggressive thyroid tumors

A decreased radioiodine uptake is frequently detected in differentiated thyroid carcinomas (DTC) and is associated with high recurrence rate and reduced survival. We investigated the correlation between NIS mRNA expression levels in the primary tumor and patient outcome using a quantitative real-time RT-PCR method. NIS expression was decreased in 17 DTC (21.04 +/- 39.66 pg Eq) compared to four autoimune thyroid disease (180.51 +/- 92.63 pg Eq) and 14 normal tissues (75.71 +/- 66.98 pg Eq) (p < 0.0001). The 17 thyroid differentiated carcinoma patients were submitted to surgery complemented by radioiodine ablation and had at least 24 months of follow-up, under levothyroxine continued suppressive therapy. According to their outcome, we could characterize a group of papillary carcinoma patients with aggressive carcinomas, whose NIS mRNA levels were markedly lower than a group with non-aggressive carcinomas (0.62 +/- 0.79 versus 54.87 +/- 53.79: p < 0.005). We suggest that the quantification of NIS mRNA relative levels in the primary tumor may predict poor outcome. (C) 2003 Elsevier Ireland Ltd. All rights reserved.

Processing and characterization of ablative composites used in rocket motors

The main objective of this research work was to obtain two formulations of ablative composites. These composites are also known as ablative structural composites, for applications in atmospherically severe conditions according to the high-temperature, hot gaseous products flow generated from the burning of solid propellants. The formulations were manufactured with phenolic resin reinforced with chopped carbon fiber. The composites were obtained by the hot compression molding technique. Another purpose of this work was to conduct the physical and chemical characterization of the matrix, the reinforcements and the composites. After the characterization, a nozzle divergent of each formulation was manufactured and its performance was evaluated through the rocket motor static firing test. According to the results found in this work, it was possible to observe through the characterization of the raw materials that phenolic resins showed peculiarities in their properties that differentiate one from the other, but did not exhibit significant differences in performance as a composite material for use in ablation conditions. Both composites showed good performance for use in thermal protection, confirmed by firing static tests (rocket motor). Composites made with phenolic resin and chopped carbon fiber showed that it is a material with excellent resistance to ablation process. This composite can be used to produce nozzle parts with complex geometry or shapes and low manufacturing cost.

Datação por U-Pb em rutilos de rochas de metamorfismo de alta pressão do grupo Araxá na região de São Sebastião do Paraíso - MG

Although several studies of Araxá Group in the region of Passos, just a few works deal with the age of metamorphism of this group. The current work aims to determine the cooling age of these rocks by in situ U-Pb dating in rutiles. Interestingly, the region of São Sebastião do Paraíso shows a condensed lithostratigraphic column from the Passos Nappe and exposes the higher metamorphic grade rocks described for this unit. The use of rutile as a geochronometer is based on its ability to incorporate U in its structure, facilitating the calculation of the age of the isotope ratio by U-Pb. Furthermore, the use of in situ dating technique with Laser Ablation has been a reliable and advantageous study because the analysis are punctual, and do not destroy the whole sample to be analyzed. The analyses of this work were made at the University of Gothenburg - Sweden and obtained 238U/206Pb ages between 608-566 ± 10 Ma and 235U/207Pb between 627-572 ± 10 Ma, showing that these ages are concordant with the literature in the area and are interpreted as the cooling age of metamorphism

Estudo comparativo entre ressecção e eletrocoagulação endometrial em paciebtes com sangramento uterino anormal

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Human dental enamel and dentin structural effects after Er:yag laser irradiation

Ideally projected to be applied on soft tissues, infrared lasers were improved by restorative dentistry to be used in hard dental tissues cavity preparations-namely enamel and dentin. This paper evidentiates the relevant aspects of infrared Erbium laser's action mechanism and its effects, and characterizes the different effects deriving from the laser's beams emission. The criteria for use and selection of optimal parameters for the correct application of laser systems and infuence of supporting factors on the process, such as water amount and its presence in the ablation process, protection exerted by the plasma shielding and structural factors, which are indispensable in dental tissues cavity preparation related to restorative technique, are subordinated to optical modifcations caused by the interaction of the energy dissipated by these laser light emission systems in the targeted tissue substrate. Clinical relevance: Differences in the action of infrared Erbium laser system in regard to the nature of the ablation process and variations on the morphological aspects observed in the super-fcial structure of the target tissue irradiated, may be correlated to the structural optical modifcations of the substrate produced by an interaction of the energy propagated by laser systems.

Características qualitativas de oócitos obtidos por Laparoscopic Ovum Pick-up (LOPU) e da maturação nuclear em ovinos

Pós-graduação em Medicina Veterinária - FMVZ

Non-hematopoietic PAR-2 is essential for matriptase-driven pre-malignant progression and potentiation of ras-mediated squamous cell carcinogenesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Down-regulation of SLC8A1 as a putative apoptosis evasion mechanism by modulation of calcium levels in penile carcinoma

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A flexible lab-on-a-chip for the synthesis and magnetic separation of magnetite decorated with gold nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface analysis of alumina ceramic exposed to shock waves produced by plasma expander

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Innovative low temperature plasma approach for deposition of alumina films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of copper vapor laser irradiation (λ = 510.6 nm) on the enamel and dentine of human teeth: An ultra-structural morphologic study

Objective: A morphological and ultra-structural study of copper vapor laser (λ = 510.6 nm) effects on enamel and dentine was performed to show the effects of this radiation. Methods: A total of 15 human molars were cut in half; 15 pieces were separated for irradiation on enamel and 15 for dentine. These two groups were further divided into five experimental groups, including a control group, comprised of three half-sections each, irradiated by a CVL laser with a power of 7 W, a repetition rate of 15,000 pulses/sec and exposed at 500, 600, and 800 msec and 1 sec irradiation times with a 5-sec interval between irradiations. Results: In an ultra-structural SEM exam, we observed that on the enamel surfaces irradiated for 1 sec there was morphological alteration that consisted of catering, flaking, and melting on the surfaces. There was no alteration for the other exposure times. On the dentine teeth irradiated for 1 sec, we observed an evident ultra-structural alteration of melted tissue and loss of morphological characteristics. In the dentine group irradiated by 800 msec, we observed ablation and a partial loss of morphological characteristics. In the dentine groups irradiated by 500 and 600 msec, no alteration was observed. Conclusions: The results showed that irradiation with CVL promoted morphologic changes in the enamel as well as in the dentine and demonstrated a need for future studies in order to establish a safe protocol for further use in the odontological practice.

Influência do espaçamento do feixe de laser Nd: YAG na obtenção de óxidos e nitretos na superfície do titânio em pressão atmosférica

Neste trabalho investigou-se a modificação de superfície do titânio pela irradiação com feixe de Laser Nd:YAG. Os parâmetros do laser como a potência, o comprimento de onda, a frequência, a velocidade de varredura e a área de exposição foram mantidos constantes, exceto o espaçamento da matriz, o qual foi de 0,01 e 0,02 mm. A caracterização da superfície foi realizada por Microscopia Eletrônica de Varredura (MEV) e Difração de Raios X (DRX), sendo que os espectros foram refinados pelo método Rietveld. Pela análise de MEV, observou-se uma mudança na topografia, obtendo uma superfície rugosa produzida pelo fenômeno de ablação. As análises por Rietveld dos espectros de difração de raios X detectaram TiN, Ti2N, TiO2 (anatásio e rutilo), sendo que a amostra com espaçamento 0,01 mm apresentou uma maior quantidade de óxidos e nitretos. Isso pode ser devido à sobreposição do feixe, induzindo à formação de uma superfície com maior estabilidade termodinâmica. Os óxidos e nitretos obtidos são de grande importância, pois são responsáveis por produzir uma maior interação entre o osso-implante.

Polidocanol versus hypertonic glucose for sclerotherapy treatment of reticular veins of the lower limbs: study protocol for a randomized controlled trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação termométrica entre preparos cavitários realizados com turbinas de alta-rotação e laser de Er:YAG

The aim of this study was to compare temperature increases produced by a well-known equipment, the high-speed handpieces, with a relatively new instrument, the Er:YAG laser (350 mJ/10 Hz). Thirty-five bovine mandibular incisors, which were reduced to an enamel/dentin thickness of 2,5 mm, were used. Cavity preparation was done till a depth of 2, 5 mm. A thermocouple was placed to read the temperature inside of the pulp chamber. Analysis was performed in these groups: I - high-speed handpiece without water-cooling (n=10); II - high-speed handpiece with water-cooling (n=10); III - Er:YAG laser without water-cooling (n=5); IV- Er:YAG laser with water-cooling (n=10) Group III had only 5 teeth because it was impossible to properly make the cavity preparations by the laser equipment without water cooling. The temperature increases were recorded in a computer linked to the thermocouples and the data of the groups I, II and IV were submitted to Dunn's multiple comparison test (p<0,05). The medium temperature increases were: 11,64ºC for group I, 0,96ºC for group II, 40,86ºC for group III and 2,9°C for group IV. There were no statistical differences between groups lI and IV, and these were different from group I. The cavity preparations made by the high-speed and the laser equipment generated very similar heat increases under water-cooling. The water-cooling is essential to avoid aggressive temperature increases, both when using the high-speed and the laser equipment, and with laser it is especially necessary for ablation of enamel