A vibrational spectroscopic study of the phosphate mineral whiteite CaMn++Mg2Al2(PO4)4(OH)2·8(H2O)

Vibrational spectroscopy enables subtle details of the molecular structure of whiteite to be determined. Single crystals of a pure phase from a Brazilian pegmatite were used. The infrared and Raman spectroscopy were applied to compare the molecular structure of whiteite with that of other phosphate minerals. The Raman spectrum of whiteite shows an intense band at 972 cm-1 assigned to the m1 PO3- 4 symmetric stretching vibrations. The low intensity Raman bands at 1076 and 1173 cm-1 are assigned to the m3 PO3- 4 antisymmetric stretching modes. The Raman bands at 1266, 1334 and 1368 cm-1 are assigned to AlOH deformation modes. The infrared band at 967 cm-1 is ascribed to the PO3- 4 m1 symmetric stretching vibrational mode. The infrared bands at 1024, 1072, 1089 and 1126 cm-1 are attributed to the PO3-4 m3 antisymmetric stretching vibrations. Raman bands at 553, 571 and 586 cm-1 are assigned to the m4 out of plane bending modes of the PO3- 4 unit. Raman bands at 432, 457, 479 and 500 cm-1 are attributed to the m2 PO4 and H2PO4 bending modes. In the 2600 to 3800 cm-1 spectral range, Raman bands for whiteite are found 3426, 3496 and 3552 cm-1 are assigned to AlOH stretching vibrations. Broad infrared bands are also found at 3186 cm-1. Raman bands at 2939 and 3220 cm-1 are assigned to water stretching vibrations. Raman spectroscopy complimented with infrared spectroscopy has enabled aspects of the structure of whiteite to be ascertained and compared with that of other phosphate minerals.

Reported consumption of takeaway food and its contribution to socioeconomic inequalities in body mass index

The aim of this study was to examine whether takeaway food consumption mediated (explained) the association between socioeconomic position and body mass index (BMI). A postal-survey was conducted among 1500 randomly selected adults aged between 25 and 64 years in Brisbane, Australia during 2009 (response rate 63.7%, N=903). BMI was calculated using self-reported weight and height. Participants reported usual takeaway food consumption, and these takeaway items were categorised into "healthy" and "less healthy" choices. Socioeconomic position was ascertained by education, household income, and occupation. The mean BMI was 27.1kg/m(2) for men and 25.7kg/m(2) for women. Among men, none of the socioeconomic measures were associated with BMI. In contrast, women with diploma/vocational education (β=2.12) and high school only (β=2.60), and those who were white-collar (β=1.55) and blue-collar employees (β=2.83) had significantly greater BMI compared with their more advantaged counterparts. However, household income was not associated with BMI. Among women, the consumption of "less healthy" takeaway food mediated BMI differences between the least and most educated, and between those employed in blue collar occupations and their higher status counterparts. Decreasing the consumption of "less healthy" takeaway options may reduce socioeconomic inequalities in overweight and obesity among women but not men.

Review of the fire performance of LSF walls

Load bearing LSF walls are commonly made of cold-formed steel frames, gypsum plasterboards and insulation, and their fire performance is an important aspect of design. Many experimental and numerical studies have been conducted on the fire performance of LSF walls at the Queensland University of Technology (QUT). These studies have shown that increasing the number or thickness or quality of gypsum plasterboards has improved the fire resistance ratings (FRR) of LSF walls while the use of cavity insulation has reduced their FRR. Therefore new LSF wall systems with external insulation sandwiched between two layers of plasterboards were proposed, which provided higher FRR than cavity insulated walls. There are also other parameters that can improve the fire performance of LSF walls such as the steel type, stud geometry and depth, type of screw fasteners used, joints in the plasterboard and the plasterboard fall off time. This paper presents a review of the fire performance of LSF walls as a function of these parameters based on our research at QUT. Their effects on both the thermal and structural performance of LSF walls are discussed in detail and suitable improvements are recommended, for example, improved plasterboard joint types.

Experimental study on the fire performance of superior LSF wall systems

Load bearing Light Gauge Steel Frame (LSF) walls are commonly made of conventional lipped channel sections and gypsum plasterboards. Recently, innovative steel sections such as hollow flange channel sections have been proposed as studs in LSF wall frames with a view to improve their fire resistance ratings. A series of full scale fire tests was then undertaken to investigate the fire performance of the new LSF wall systems under standard fire conditions. Test wall frames made of hollow flange section studs were lined with fire resistant gypsum plasterboards on both sides, and were subjected to increasing temperatures as given by the standard fire curve on one side. Both uninsulated and cavity insulated walls were tested with varying load ratios from 0.2 to 0.6. This paper presents the details of this experimental study on the fire performance of LSF walls and the results. Test results showed that the walls made of the new hollow flange channel section studs have a superior fire performance in comparison to that of lipped channel section stud walls. They also showed that the fire performance of cavity insulated walls was inferior to that of uninsulated walls. The reasons for this fire behaviour are described in this paper.

A group psychological intervention to enhance the coping and acculturation of international students

There is a shortage of psychological interventions to aid the acculturation of international students. To address this issue, the present study developed and trialled a brief group psychological intervention, the STAR program: Strengths, Transitions, Adjustments, and Resilience. This program was developed using suggestions from international students and university professional and academic staff that had significant dealings and designated roles to guide support international students. It comprises of four weekly two-hour sessions, and is experiential and cognitive-behavioural in nature. The STAR program aims to enhance coping, which is predicted to subsequently improve psychological adaptation (an acculturation outcome). Sixteen international students participated in the pilot trial of the STAR program. The participants completed measures on coping self-efficacy, social self-efficacy, psychological adaptation, and psychological distress pre-intervention, post-intervention, and one-month follow-up. Results showed that participants’ psychological adaptation and coping self-efficacy significantly increased from pre to post, with the treatment gain maintained at the one-month follow-up for psychological adaptation. Increases in social self-efficacy were evident, but these did not reach significance, possibly due to a lack of power. The STAR program did not have an impact on psychological distress; however, participants were only minimally distressed at the commencement of the program. The qualitative feedback gathered from the participants, provided suggestions for further refinement, as well as information about the clinical utility of the STAR program.

Breastfeeding self-efficacy of women using second-line strategies for healthy term infants in the first week postpartum : an Australian observational study

Background Breastfeeding self-efficacy (BFSE) supports breastfeeding initiation and duration. Challenges to breastfeeding may undermine BFSE, but second-line strategies including nipple shields, syringe, cup, supply line and bottle feeding may support breastfeeding until challenges are resolved. The primary aim of this study was to examine BFSE in a sample of women using second-line strategies for feeding healthy term infants in the first week postpartum. Methods A retrospective self-report study was conducted using the Breastfeeding Self-Efficacy Scale - Short Form (BSES-SF), demographic and infant feeding questionnaires. Breastfeeding women who gave birth to a singleton healthy term infant at one private metropolitan birthing facility in Australia from November 2008 to February 2009 returned anonymous questionnaires by mail. Results A total of 128 (73 multiparous, 55 primiparous) women participated in the study. The mean BSES-SF score was 51.18 (Standard deviation, SD: 12.48). The median BSES-SF score was 53. Of women using a second-line strategy, 16 exceeded the median, and 42 were below. Analyses using Kruskal-Wallis tests confirmed this difference was statistically significant (H = 21.569, p = 0.001). The rate of second-line strategy use was 48%. The four most commonly used second-line strategies were: bottles with regular teats (77%); syringe feeding (44%); bottles with wide teats (34%); and nipple shields (27%). Seven key challenges were identified that contributed to the decision to use second-line strategies, including: nipple pain (40%); unsettled infant (40%); insufficient milk supply (37%); fatigue (37%); night nursery care (25%); infant weight loss > 10% (24%); and maternal birth associated pain (20%). Skin-to-skin contact at birth was commonly reported (93%). At seven days postpartum 124 women (97%) were continuing to breastfeed. Conclusions The high rate of use of second-line strategies identified in this study and high rate of breastfeeding at day seven despite lower BFSE indicate that such practices should not be overlooked by health professionals. The design of this study does not enable determination of cause-effect relationships to identify factors which contribute to use of second-line strategies. Nevertheless, the significantly lower BSES-SF score of women using a second-line strategy highlights this group of women have particular needs that require attention.

Mining universities : can we count on the integrity of research coming out of today's mining-funded tertiary sector?

Australia's economic growth and national identity have been widely celebrated as being founded on the nation's natural resources. With the golden era of pastoralism fading into the distance, a renewed love affair with primary industries has been much lauded, particularly by purveyors of neoliberal ideology. The considerable wealth generated by resource extraction has, despite its environmental and social record, proved seductive to the university sector. The mining industry is one of a number of industries and sectors (alongside pharmaceutical, chemical and biotechnological) that is increasingly courting Australian universities. These new public-private alliances are often viewed as the much-needed cash cow to bridge the public funding shortfall in the tertiary sector. However, this trend also raises profound questions about the capacity of public good institutions, as universities were once assumed to be, to maintain institutional independence and academic freedoms.

Review of community facilities in Australian retirement villages : a content analysis

Aim Facilities in retirement villages form a supportive environment for older residents. The purpose of this paper is to investigate the provision of these facilities in retirement villages, which are regarded as a viable accommodation option for the ever-increasing ageing population in Australia. Method A content analysis of 124 retirement villages operated by 22 developers in Queensland and South Australia was conducted for the research purpose. Results The most widely provided facilities are community centres, libraries, barbeque facilities, hairdressers/salons and billiards/snooker/pool tables. Commercial operators provide more facilities than not-for-profit organisations and larger retirement villages normally have more facilities due to the economics of scale involved. Conclusions The results of the study provide a useful reference for providing facilities within retirement villages that may support the quality lifestyles for the older residents.

Self-exciting hurdle models for terrorist activity

A predictive model of terrorist activity is developed by examining the daily number of terrorist attacks in Indonesia from 1994 through 2007. The dynamic model employs a shot noise process to explain the self-exciting nature of the terrorist activities. This estimates the probability of future attacks as a function of the times since the past attacks. In addition, the excess of nonattack days coupled with the presence of multiple coordinated attacks on the same day compelled the use of hurdle models to jointly model the probability of an attack day and corresponding number of attacks. A power law distribution with a shot noise driven parameter best modeled the number of attacks on an attack day. Interpretation of the model parameters is discussed and predictive performance of the models is evaluated.

Why are there Different Age Related Trends for Different Chemicals?

Persistent organic pollutants (POPs) such as dioxins, PCBs, persistent organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) as well as perfluorinated compounds (PFCs) and triclosan are ubiquitous in the human population. In Australia, we have pooled and subsequently analysed over 10 000 human serum samples for the determination of these chemicals by age group (0–0.5; 0.6–1; 1.1–1.5; 1.6–2; 2.1–2.5; 2.6–3; 3.1–3.5; 3.6–4; 4.1–6; 6.1–9; 9.1–12; 12.1–15; 16–30; 31–45; 46–60 and >60 years) and gender. The results of this analysis were then used to assess the trends of these different chemicals as a function of age, gender and to a lesser extent region. Our data demonstrate clear chemical specific age trends. In particular we demonstrate that for the traditional POPs there is an increase in body burden with age whereas the opposite is true for chemicals such as PBDEs. For PFCs we find chemical specific age trends that vary from compound to compound. For triclosan we show that no apparent age trend is observable. The results of the study and its implications to the collection and archiving of samples for retrospective analysis are discussed.

Are lifecycle funds appropriate as default options in participant-directed retirement plans?

The appropriateness of default investment options in participant-directed retirement plans like 401(k) has been in sharp focus given that most participants fail to nominate an investment option to direct their contributions. In United States (US), prior to the Pension Protection Act (PPA) of 2006, plan fiduciaries often selected a money market fund as the default option. Whilst this ‘low risk and low return’ investment option was considered to be a ‘safe’ choice by many fiduciaries who were fearful of litigation risk, it was heavily criticized for resulting in inadequate wealth at retirement, particularly when retirees were living much longer and facing inflation risk (see, for example, Viceira, 2008; Skinner, 2009)...

The mining boom and Western Australia's changing landscape : towards sustainability or business as usual?

The practices and public reputation of mining have been changing over time. In the past, mining operations frequently stood accused of being socially and environmentally disruptive, whereas mining today invests heavily in ‘socially responsible’ and ‘sustainable’ business practices. Changes such as these can be witnessed internationally as well as in places like Western Australia (WA), where the mining sector has matured into an economic pillar of the state, and indeed the nation in the context of the recent resources boom. This paper explores the role of mining in WA, presenting a multi-disciplinary perspective on the sector's contribution to sustainable development in the state. The perspectives offered here are drawn from community-based research and the associated academic literature as well as data derived from government sources and the not-for-profit sector. Findings suggest that despite noteworthy attitudinal and operational improvements in the industry, social, economic and environmental problem areas remain. As mining in WA is expected to grow in the years to come, these problem areas require the attention of business and government alike to ensure the long-term sustainability of development as well as people and place.

A place in the sun : the politics of place, identity and branding

There is no doubt that place branding is a powerful and ubiquitous practice deployed around the globe. Parallel to its acceptance and development as a distinct discipline is an understanding that place branding as responsible practice offers the means to achieve widespread economic, social and cultural benefits. Drawing on work around place and identity in cultural geography and cultural studies, this paper engages critically with this vision. Specifically, it challenges the widely-held assumption that the relationship between place branding and place identity is fundamentally reflective, arguing instead that this relationship is inherently generative. This shift in perspective, explored in relation to current responsible place branding practice, is central to the realisation of place branding as a force for good.

A Survey of the 2010 Quartz Crystal Microbalance Literature

In 2010 there has again been an increase in the number of papers published involving piezoelectric acoustic sensors, or quartz crystal microbalances (QCM), when compared to the last period reviewed 2006-2009. The average number of QCM publications per annum was 124 in the period 2001-2005, 223 in the period 2006-9, and 273 in 2010. There are trends towards increasing use of QCM in the study of protein adsorption to surfaces (93% increase), homeostasis (67% increase), protein-protein interactions (40% increase), and carbohydrates (43% increase). New commercial systems have been released that are driving the uptake of the technology for characterisation of binding specificities, affinities, kinetics and conformational changes associated with a molecular recognition event. This article highlights theoretical and practical aspects of the principals that underpin acoustic analysis, then reviews exemplary papers in key application areas involving small molecular weight ligands, carbohydrates, proteins, nucleic acids, viruses, bacteria, cells, and membrane interfaces.