Zweikernige 3d-Übergangsmetall-Komplexe mit Derivaten des para-Phenylendiamins als redoxaktive Brückenliganden

Die vorliegende Arbeit beschäftigt sich mit der Darstellung zweikerniger Koordinationsverbindungen, bei denen zweiwertige Ionen der 3d-Übergangsmetalle über einen bestimmten Liganden verbrückt sind. Dieser Brückenligand, das N,N,N‘,N‘-Tetrakis-(2-methylpyridyl)-benzol-1,4-diamin (TPBD), besteht aus einem p-Phenylendiamin-Gerüst, an dessen Stickstoffe je zwei Methylpyridin-Gruppen gebunden sind. In diesen zwei jeweils dreizähnigen Bindungstaschen wurden 3d-Übergangsmetallionen komplexiert, wobei deren Koordinationssphäre mit einem zweizähnigen capping-Liganden vom Typ des 1,10-Phenanthrolins und einem einzähnigen dritten Liganden abgesättigt wird. Die strukturellen, magnetischen und elektronischen Eigenschaften der so erhaltenen homometallischen Komplexe mit Mn(II), Fe(II), Co(II), Ni(II), Cu(II) und Zn(II) wurden untersucht. Dabei wurde besonderes Augenmerk auf die Veränderung dieser Eigenschaften bei dem Einsatz unterschiedlicher capping- und dritter Liganden gerichtet. Die schwach antiferromagnetische Wechselwirkung der metallzentrierten Spins über den Brückenliganden führt dabei stets zu einem diamagnetischen Grundzustand, was diese als mögliche Einzelmolekülmagnete ausschließt. Mit der Oxidierbarkeit des Liganden zu seiner radikalischen Spezies besteht die Möglichkeit, einen zusätzlichen Spin in dem System zu erzeugen, woraus ein Spingrundzustand von ungleich null resultiert. Es zeigte sich, dass die Lebensdauer der radikalischen Spezies eine starke Abhängigkeit sowohl von den eingesetzten Metallionen als auch den weiteren Liganden besitzt. Auch vier Derivate des ursprünglichen Brückenliganden konnten synthetisiert und deren Oxidierbarkeit zu den entsprechenden Radikalformen gezeigt werden. Neben der Darstellung homometallischer Komplexe gelang zudem die Synthese und Strukturaufklärung dreier heterometallischer zweikerniger Komplexe mit Mn(II), Co(II) und Ni(II) als Metallionen. Es konnte gezeigt werden, dass diese auch ohne die Oxidation des Brückenliganden bei schwacher antiferromagnetischer Wechselwirkung der Spins einen paramagnetischen Spingrundzustand besitzen.

HCl gas gettering of 3d transition metals for crystalline silicon solar cell concepts

In order to reduce the costs of crystalline silicon solar cells, low-cost silicon materials like upgraded metallurgical grade (UMG) silicon are investigated for the application in the photovoltaic (PV) industry. Conventional high-purity silicon is made by cost-intensive methods, based on the so-called Siemens process, which uses the reaction to form chlorosilanes and subsequent several distillation steps before the deposition of high-purity silicon on slim high-purity silicon rods. UMG silicon in contrast is gained from metallurgical silicon by a rather inexpensive physicochemical purification (e.g., acid leaching and/or segregation). However, this type of silicon usually contains much higher concentrations of impurities, especially 3d transition metals like Ti, Fe, and Cu. These metals are extremely detrimental in the electrically active part of silicon solar cells, as they form recombination centers for charge carriers in the silicon band gap. This is why simple purification techniques like gettering, which can be applied between or during solar cell process steps, will play an important role for such low-cost silicon materials. Gettering in general describes a process, whereby impurities are moved to a place or turned into a state, where they are less detrimental to the solar cell. Hydrogen chloride (HCl) gas gettering in particular is a promising simple and cheap gettering technique, which is based on the reaction of HCl gas with transition metals to form volatile metal chloride species at high temperatures.rnThe aim of this thesis was to find the optimum process parameters for HCl gas gettering of 3d transition metals in low-cost silicon to improve the cell efficiency of solar cells for two different cell concepts, the standard wafer cell concept and the epitaxial wafer equivalent (EpiWE) cell concept. Whereas the former is based on a wafer which is the electrically active part of the solar cell, the latter uses an electrically inactive low-cost silicon substrate with an active layer of epitaxially grown silicon on top. Low-cost silicon materials with different impurity grades were used for HCl gas gettering experiments with the variation of process parameters like the temperature, the gettering time, and the HCl gas concentration. Subsequently, the multicrystalline silicon neighboring wafers with and without gettering were compared by element analysis techniques like neutron activation analysis (NAA). It was demonstrated that HCl gas gettering is an effective purification technique for silicon wafers, which is able to reduce some 3d transition metal concentrations by over 90%. Solar cells were processed for both concepts which could demonstrate a significant increase of the solar cell efficiency by HCl gas gettering. The efficiency of EpiWE cells could be increased by HCl gas gettering by approximately 25% relative to cells without gettering. First process simulations were performed based on a simple model for HCl gas gettering processes, which could be used to make qualitative predictions.

Ricostruzione 3d da immagini rgb-d su piattaforma mobile

Viene proposto un porting su piattaforma mobile Android di un sistema SLAM (Simultaneous Localization And Mapping) chiamato SlamDunk. Il porting affronta problematiche di prestazioni e qualità delle ricostruzioni 3D ottenute, proponendo poi la soluzione ritenuta ottimale.

Evaluation of 3D cell culture systems for host-pathogen interaction studies

Traditional cell culture models have limitations in extrapolating functional mechanisms that underlie strategies of microbial virulence. Indeed during the infection the pathogens adapt to different tissue-specific environmental factors. The development of in vitro models resembling human tissue physiology might allow the replacement of inaccurate or aberrant animal models. Three-dimensional (3D) cell culture systems are more reliable and more predictive models that can be used for the meaningful dissection of host–pathogen interactions. The lung and gut mucosae often represent the first site of exposure to pathogens and provide a physical barrier against their entry. Within this context, the tracheobronchial and small intestine tract were modelled by tissue engineering approach. The main work was focused on the development and the extensive characterization of a human organotypic airway model, based on a mechanically supported co-culture of normal primary cells. The regained morphological features, the retrieved environmental factors and the presence of specific epithelial subsets resembled the native tissue organization. In addition, the respiratory model enabled the modular insertion of interesting cell types, such as innate immune cells or multipotent stromal cells, showing a functional ability to release pertinent cytokines differentially. Furthermore this model responded imitating known events occurring during the infection by Non-typeable H. influenzae. Epithelial organoid models, mimicking the small intestine tract, were used for a different explorative analysis of tissue-toxicity. Further experiments led to detection of a cell population targeted by C. difficile Toxin A and suggested a role in the impairment of the epithelial homeostasis by the bacterial virulence machinery. The described cell-centered strategy can afford critical insights in the evaluation of the host defence and pathogenic mechanisms. The application of these two models may provide an informing step that more coherently defines relevant molecular interactions happening during the infection.

A new 3D modelling paradigm for discrete model

Until few years ago, 3D modelling was a topic confined into a professional environment. Nowadays technological innovations, the 3D printer among all, have attracted novice users to this application field. This sudden breakthrough was not supported by adequate software solutions. The 3D editing tools currently available do not assist the non-expert user during the various stages of generation, interaction and manipulation of 3D virtual models. This is mainly due to the current paradigm that is largely supported by two-dimensional input/output devices and strongly affected by obvious geometrical constraints. We have identified three main phases that characterize the creation and management of 3D virtual models. We investigated these directions evaluating and simplifying the classic editing techniques in order to propose more natural and intuitive tools in a pure 3D modelling environment. In particular, we focused on freehand sketch-based modelling to create 3D virtual models, interaction and navigation in a 3D modelling environment and advanced editing tools for free-form deformation and objects composition. To pursuing these goals we wondered how new gesture-based interaction technologies can be successfully employed in a 3D modelling environments, how we could improve the depth perception and the interaction in 3D environments and which operations could be developed to simplify the classical virtual models editing paradigm. Our main aims were to propose a set of solutions with which a common user can realize an idea in a 3D virtual model, drawing in the air just as he would on paper. Moreover, we tried to use gestures and mid-air movements to explore and interact in 3D virtual environment, and we studied simple and effective 3D form transformations. The work was carried out adopting the discrete representation of the models, thanks to its intuitiveness, but especially because it is full of open challenges.

Analisi FEM 3D d'interazione terreno-struttura: effetti dello scavo di una galleria sotto edifici in muratura

La presente tesi ha riguardato lo studio numerico con un modello 3D dell' interazione tra lo scavo di una galleria urbana e un edificio esistente in muratura, la Stazione di Ferrara Porta Reno (risalente ai primi del '900). A tale scopo è stato utilizzato il programma di calcolo agli elementi finiti Plaxis 3D. Nello studio numerico, per il terreno è stato adottato un modello costitutivo avanzato elasto-plastico con incrudimento isotropo, l’Hardening soil model with small strain stiffness, mentre per la muratura e stato utilizzato il criterio di Mohr-Coulomb. Inoltre, lo scavo della galleria è stato simulato con una procedura per passi, tenendo in conto i principali aspetti del processo. La subsidenza in superficie è stata controllata applicando una contrazione fittizia lungo lo scudo. E’ stata svolta un'analisi numerica in condizione di campo libero, ossia in assenza di strutture, al fine di valutare i movimenti del terreno indotti dal processo di scavo; successivamente sono state eseguite diverse analisi accoppiate, in condizioni di simmetria e con eccentricità della costruzione rispetto all'asse della galleria, per studiare il complesso fenomeno di interazione galleria-terreno-struttura. I risultati di tali analisi accoppiate sono stati utilizzati per effettuare una stima del livello di danno atteso per l'edificio. Le analisi numeriche condotte hanno messo in luce, confermando quanto già noto in letteratura, che la presenza di un edificio a piano campagna interagente con l’opera di scavo modifica la forma del profilo dei cedimenti relativa alle condizioni di campo libero. Tale modifica, che dipende dalle specifiche caratteristiche di rigidezza e peso della struttura presa in esame, generalmente si traduce in una riduzione del cedimento differenziale che può influenzare in modo significativo la stima del danno sull’edificio. Ciò è tanto più evidente, quanto maggiore è la perdita di volume indotta dallo scavo della galleria.

Kinematics of local and high-z galaxies through 3D modeling of emission-line datacubes

The kinematics is a fundamental tool to infer the dynamical structure of galaxies and to understand their formation and evolution. Spectroscopic observations of gas emission lines are often used to derive rotation curves and velocity dispersions. It is however difficult to disentangle these two quantities in low spatial-resolution data because of beam smearing. In this thesis, we present 3D-Barolo, a new software to derive the gas kinematics of disk galaxies from emission-line data-cubes. The code builds tilted-ring models in the 3D observational space and compares them with the actual data-cubes. 3D-Barolo works with data at a wide range of spatial resolutions without being affected by instrumental biases. We use 3D-Barolo to derive rotation curves and velocity dispersions of several galaxies in both the local and the high-redshift Universe. We run our code on HI observations of nearby galaxies and we compare our results with 2D traditional approaches. We show that a 3D approach to the derivation of the gas kinematics has to be preferred to a 2D approach whenever a galaxy is resolved with less than about 20 elements across the disk. We moreover analyze a sample of galaxies at z~1, observed in the H-alpha line with the KMOS/VLT spectrograph. Our 3D modeling reveals that the kinematics of these high-z systems is comparable to that of local disk galaxies, with steeply-rising rotation curves followed by a flat part and H-alpha velocity dispersions of 15-40 km/s over the whole disks. This evidence suggests that disk galaxies were already fully settled about 7-8 billion years ago. In summary, 3D-Barolo is a powerful and robust tool to separate physical and instrumental effects and to derive a reliable kinematics. The analysis of large samples of galaxies at different redshifts with 3D-Barolo will provide new insights on how galaxies assemble and evolve throughout cosmic time.

3D-Elektronenmikroskopie dreier respiratorischer Proteine unter Verbesserung der bioinformatischen Abläufe

Die Transmissionselektronenmikroskopie gepaart mit bioinformatischen Methoden zur digitalen Bildverarbeitung ist ein schneller Weg zur Erstellung dreidimensionaler Rekonstruktionen großer Proteinkomplexe. Durch die Kombination der 3D-Elektronenmikroskopie mit der Röntgenstruktur von Untereinheiten erhält man ein pseudoatomares Modell der Quartärstruktur.rnIn dieser Arbeit wurden auf diese Weise die Quartärstrukturen von drei unterschiedlichen respiratorischen Proteinen analysiert (einem Hämoglobin und zwei Hämocyaninen). Zudem wurden spezielle Software-Tools entwickelt, um vorhandene Softwarepakete besser miteinander kombinieren zu können.rnDie ca. 15Å 3D-Rekonstruktion des Hämoglobins vom Wasserfloh Daphnia pulex klärt die umstrittene Frage, wie viele Untereinheiten die Quartärstruktur aufbauen: Es sind 16 (mit je zwei Häm-Domänen), angeordnet in zwei Schichten als D4-symmetrisches Sandwich. Die ca. 15 Å 3D-Rekonstruktion des 2x6meren Hämocyanins des Flusskrebses Astacus leptodactylus gibt neue Einblicke in die Kontaktstelle zwischen den beiden Hexameren; sie liegt im Bereich der Domäne 3. Bei dem aus 48 Untereinheiten bestehenden Hämocyanin des Pfeilschwanzes Limulus polyphemus wurde eine Auflösung von ca. 7 Å erreicht. Die Homologiemodelle der Untereinheiten wurden flexibel gefittet. An einer der Kontaktstellen zwischen den beiden Halbmolekülen wurden Molekulardynamik (MD)-Simulationen durchgeführt, um mehr über die Art der chemischen Bindung an dieser Kontaktstelle zu erfahren.rnSpeziell für die Kombination von 3D-Elektronenmikroskopie und MD-Simulation wurden verschiedene bioinformatische Werkzeuge und eine leicht zu erweiternde universelle grafische Benutzeroberfläche (GUI) entwickelt.

2D and 3D numerical modelling of multilayer detachment folding and salt tectonics

Numerical modelling was performed to study the dynamics of multilayer detachment folding and salt tectonics. In the case of multilayer detachment folding, analytically derived diagrams show several folding modes, half of which are applicable to crustal scale folding. 3D numerical simulations are in agreement with 2D predictions, yet fold interactions result in complex fold patterns. Pre-existing salt diapirs change folding patterns as they localize the initial deformation. If diapir spacing is much smaller than the dominant folding wavelength, diapirs appear in fold synclines or limbs.rnNumerical models of 3D down-building diapirism show that sedimentation rate controls whether diapirs will form and influences the overall patterns of diapirism. Numerical codes were used to retrodeform modelled salt diapirs. Reverse modelling can retrieve the initial geometries of a 2D Rayleigh-Taylor instability with non-linear rheologies. Although intermediate geometries of down-built diapirs are retrieved, forward and reverse modelling solutions deviate. rnFinally, the dynamics of fold-and-thrusts belts formed over a tilted viscous detachment is studied and it is demonstrated that mechanical stratigraphy has an impact on the deformation style, switching from thrust- to folding-dominated. The basal angle of the detachment controls the deformation sequence of the fold-and-thrust belt and results are consistent with critical wedge theory.rn

Disegno e sviluppo di scenari di simulazione in 3D per l'addestramento dei controllori del traffico aereo

In questo elaborato verrà illustrato il processo di realizzazione degli scenari tridimensionali utilizzati nell’addestramento dei Controllori del Traffico Aereo di aeroporto. Verrà esposto nel dettaglio il processo di modellazione al computer di scenari compatibili con il sistema Adacel™ MaxSim® attualmente utilizzato nei simulatori di ENAV Academy; verranno inoltre analizzati e descritti i processi decisionali che si affrontano prima e durante le diverse fasi di realizzazione dello scenario. Nell’illustrare i processi e le metodologie si farà riferimento all’esperienza acquisita durante la collaborazione con il team di ENAV per la realizzazione di modelli e scenari tridimensionali. In particolare, si farà riferimento allo scenario dell’Aeroporto di Ciampino in una fase di addestramento resa necessaria dal delicato passaggio dalla gestione militare alla gestione civile.

Un'applicazione 3D con HTML5 e WebGL

Progetto e realizzazione di un’applicazione web per la visualizzazione di NURBS

3D-ultrastructure, functions and stress responses of rhogocytes from the freshwater gastropods Biomphalaria glabrata and Lymnaea stagnalis

Rhogocytes, also termed ‘pore cells’, exist free in the hemolymph or embedded in the connective tissue of different body parts of molluscs, notably gastropods. These unique cells can be round, elongated or irregularly shaped, and up to 30 μm in diameter. Their hallmark is the so-called slit apparatus: i.e. pocket-like invaginations of the plasma membrane creating extracellular lacunae, bridged by cytoplasmic bars. These bars form distinctive slits of ca. 20 nm width. A slit diaphragm composed of proteins establishes a molecular sieve with holes of 20 x 20 nm. Different functions have been assigned to this special molluscan cell type, notably biosynthesis of the hemolymph respiratory protein hemocyanin. It has further been proposed, but not proven, that in the case of red-blooded snail species rhogocytes might synthesize the hemoglobin. However, the secretion pathway of these hemolymph proteins, and the functional role of the enigmatic slit apparatus remained unclear. Additionally proposed functions of rhogocytes, such as heavy metal detoxification or hemolymph protein degradation, are also not well studied. This work provides more detailed electron microscopical, histological and immunobiochemical information on the structure and function of rhogocytes of the freshwater snails Biomphalaria glabrata and Lymnaea stagnalis. By in situ hybridization on mantle tissues, it proves that B. glabrata rhogocytes synthesize hemoglobin and L. stagnalis rhogocytes synthesize hemocyanin. Hemocyanin is present, in endoplasmic reticulum lacunae and in vesicles, as individual molecules or pseudo-crystalline arrays. The first 3D reconstructions of rhogocytes are provided by means of electron tomography and show unprecedented details of the slit apparatus. A highly dense material in the cytoplasmic bars close to the diaphragmatic slits was shown, by immunogold labeling, to contain actin. By immunofluorescence microscopy, the protein nephrin was localized at the periphery of rhogocytes. The presence of both proteins in the slit apparatus supports the previous hypothesis, hitherto solely based on similarities of the ultrastructure, that the molluscan rhogocytes are phylogenetically related to mammalian podocytes and insect nephrocytes. A possible secretion pathway of respiratory proteins that includes a transfer mechanism of vesicles through the diaphragmatic slits is proposed and discussed. We also studied, by electron microscopy, the reaction of rhogocytes in situ to two forms of animal stress: deprivation of food and cadmium contamination of the tank water. Significant cellular reactions to both stressors were observed and documented. Notably, the slit apparatus surface and the number of electron-dense cytoplasmic vesicles increased in response to cadmium stress. Food deprivation led to an increase in hemocyanin production. These observations are also discussed in the framework of using such animals as potential environmental biomarkers.

Ottimizzazione di metodi numerici e realizzazione di un setup per l'imaging di colture cellulari 3D con tomografia ad impedenza elettrica

Il presente lavoro di tesi presenta la progettazione, realizzazione e applicazione di un setup sperimentale miniaturizzato per la ricostruzione di immagine, con tecnica di Tomografia ad Impedenza Elettrica (EIT). Il lavoro descritto nel presente elaborato costituisce uno studio di fattibilità preliminare per ricostruire la posizione di piccole porzioni di tessuto (ordine di qualche millimetro) o aggregati cellulari dentro uno scaffold in colture tissutali o cellulari 3D. Il setup disegnato incorpora 8 elettrodi verticali disposti alla periferia di una camera di misura circolare del diametro di 10 mm. Il metodo di analisi EIT è stato svolto utilizzando i) elettrodi conduttivi per tutta l’altezza della camera (usati nel modello EIT bidimensionale e quasi-bidimensionale) e ii) elettrodi per deep brain stimulation (conduttivi esclusivamente su un ridotto volume in punta e posti a tre diverse altezze: alto, centro e basso) usati nel modello EIT tridimensionale. Il metodo ad elementi finiti (FEM) è stato utilizzato per la soluzione sia del problema diretto che del problema inverso, con la ricostruzione della mappa di distribuzione della conduttività entro la camera di misura. Gli esperimenti svolti hanno permesso di ricostruire la mappa di distribuzione di conduttività relativa a campioni dell’ordine del millimetro di diametro. Tali dimensioni sono compatibili con quelle dei campioni oggetto di studio in ingegneria tissutale e, anche, con quelle tipiche dei sistemi organ-on-a-chip. Il metodo EIT sviluppato, il prototipo del setup realizzato e la trattazione statistica dei dati sono attualmente in fase di implementazione in collaborazione con il gruppo del Professor David Holder, Dept. Medical Physics and Bioengineering, University College London (UCL), United Kingdom.

Modulo di gestione della stampa 3D e CAM in ambiente FreeCAD

In Italia hanno visto stampanti 3D commerciali, e grazie al gruppo di professori e ricercatori della Facoltà di Ingegneria Meccanica dell'Università di Bologna, con cui ho avuto la possibilità di realizzare questa tesi, è nato il progetto di una stampante 3D ibrida, dotata sia di una fresatrice che di un estrusore: una stampante talmente grande che si va a posizionare come la stampante più grande di tutta Italia. Il mio progetto, si chiama PrinterCAD, è in grado infatti di gestire le diverse fasi della stampa 3D ibrida con i necessari parametri di lavorazione e controllo. Questo applicazione è un modulo realizzato in Python e segue la filosofia del MVC; inoltre estende il software opensource FreeCAD.