Coherent tunnelling in Cu2+- and Ag2+-doped MgO and CaO: Cu2+ explored through ab initio calculations

The observation of coherent tunnelling in Cu2+ - and Ag2+ -doped MgO and CaO:Cu2+ was a crucial discovery in the realm of the Jahn-Teller (JT) effect. The main reasons favoring this dynamic behavior are now clarified through ab initio calculations on Cu2+ - and Ag2+ -doped cubic oxides. Small JT distortions and an unexpected low anharmonicity of the eg JT mode are behind energy barriers smaller than 25 cm-1 derived through CASPT2 calculations for Cu2+ - and Ag2+ -doped MgO and CaO:Cu2+ . The low anharmonicity is shown to come from a strong vibrational coupling of MO610- units (M=Cu,Ag) to the host lattice. The average distance between the d9 impurity and ligands is found to vary significantly on passing from MgO to SrO following to a good extent the lattice parameter.

Characterization of CNTs and CNTs/MnO2 composite for supercapacitor application

Màster en Nanociència i Nanotecnologia

‘‘catalysis by nano sulfated titania modified by transition metals"

in the present study, we have prepared and evaluated the physical and chemical properties and catalytic activities of transition metal loaded sulfated titania via the sol-gel route. Sol-gel method is widely used for preparing porous materials having controlled properties and leads to the formation of oxide particles in nano range, which are spherical or interconnected to each other. Characterization using various physico-chemical techniques and a detailed study of acidic properties are also carried out. Some reactions of industrial importance such as Friedel-Crafts reaction, fen-butylation of phenol,Beckmann rearrangement of cyclohexanone oxime, nitration of phenol and photochemical degradation of methylene blue have been selected for catalytic activity study in the present venture. The work is organized into eight chapters

Synthesis, Characterization and Catalytic Activity of Nanocrystalline Ceria Modified With Zirconia

The use of catalysts in chemical and refining processes has increased rapidly since 1945, when oil began to replace coal as the most important industrial raw material. Catalysis has a major impact on the quality of human life as well as economic development. The demand for catalysts is still increasing since catalysis is looked up as a solution to eliminate or replace polluting processes. Metal oxides represent one of the most important and widely employed classes of solid catalysts. Much effort has been spent in the preparation, characterization and application of metal oxides. Recently, great interest has been devoted to the cerium dioxide (CeO2) containing materials due to their broad range of applications in various fields, ranging from catalysis to ceramics, fuel cell technologies, gas sensors, solid state electrolytes, ceramic biomaterials, etc., in addition to the classical application of CeO2 as an additive in the so-called three way catalysts (TWC) for automotive exhaust treatment. Moreover, it can promote water gas shift and steam reforming reactions, favours catalytic activity at the interfacial metal-support sites. The solid solutions of ceria with Group IV transitional-metals deserve particular attention for their applicability in various technologically important catalytic processes. Mesoporous CeO2−ZrO2 solid solutions have been reported to be employed in various reactions which include CO oxidation, soot oxidation, water-gas shift reaction, and so on. Inspired by the unique and promising characteristics of ceria based mixed oxides and solid solutions for various applications, we have selected ceria-zirconia oxides for our studies. The focus of the work is the synthesis and investigation of the structural and catalytic properties of modified and pure ceria-zirconia mixed oxide.

Strain induced anomalous red shift in mesoscopic iron oxide prepared by a novel technique

Nano magnetic oxides are promising candidates for high density magnetic storage and other applications. Nonspherical mesoscopic iron oxide particles are also candidate materials for studying the shape, size and strain induced modifications of various physical properties viz. optical, magnetic and structural. Spherical and nonspherical iron oxides having an aspect ratio, ~2, are synthesized by employing starch and ethylene glycol and starch and water, respectively by a novel technique. Their optical, structural, thermal and magnetic properties are evaluated. A red shift of 0⋅24 eV is observed in the case of nonspherical particles when compared to spherical ones. The red shift is attributed to strain induced changes in internal pressure inside the elongated iron oxide particles. Pressure induced effects are due to the increased overlap of wave functions. Magnetic measurements reveal that particles are superparamagnetic. The marked increase in coercivity in the case of elongated particles is a clear evidence for shape induced anisotropy. The decreased specific saturation magnetization of the samples is explained on the basis of weight percentage of starch, a nonmagnetic component and is verified by TGA and FTIR studies. This technique can be modified for tailoring the aspect ratio and these particles are promising candidates for drug delivery and contrast enhancement agents in magnetic resonance imaging

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary

Synthesis, Characterization and Applications of Hybrid Nanocomposites of TiO2 With Conducting Polymers

A nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm), or structures having nano-scale repeat distances between the different phases that make up the material. In the broadest sense this definition can include porous media, colloids, gels and copolymers, but is more usually taken to mean the solid combination of a bulk matrix and nano-dimensional phase(s) differing in properties due to dissimilarities in structure and chemistry. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed, <5 nm for catalytic activity, <20 nm for making a hard magnetic material soft, <50 nm for refractive index changes, and <100 nm for achieving superparamagnetism, mechanical strengthening or restricting matrix dislocation movement. Conducting polymers have attracted much attention due to high electrical conductivity, ease of preparation, good environmental stability and wide variety of applications in light-emitting, biosensor chemical sensor, separation membrane and electronic devices. The most widely studied conducting polymers are polypyrrole, polyaniline, polythiophene etc. Conducting polymers provide tremendous scope for tuning of their electrical conductivity from semiconducting to metallic region by way of doping and are organic electro chromic materials with chemically active surface. But they are chemically very sensitive and have poor mechanical properties and thus possessing a processibility problem. Nanomaterial shows the presence of more sites for surface reactivity, they possess good mechanical properties and good dispersant too. Thus nanocomposites formed by combining conducting polymers and inorganic oxide nanoparticles possess the good properties of both the constituents and thus enhanced their utility. The properties of such type of nanocomposite are strongly depending on concentration of nanomaterials to be added. Conducting polymer composites is some suitable composition of a conducting polymer with one or more inorganic nanoparticles so that their desirable properties are combined successfully. The composites of core shell metal oxide particles-conducting polymer combine the electrical properties of the polymer shell and the magnetic, optical, electrical or catalytic characteristics of the metal oxide core, which could greatly widen their applicability in the fields of catalysis, electronics and optics. Moreover nanocomposite material composed of conducting polymers & oxides have open more field of application such as drug delivery, conductive paints, rechargeable batteries, toners in photocopying, smart windows, etc.The present work is mainly focussed on the synthesis, characterization and various application studies of conducting polymer modified TiO2 nanocomposites. The conclusions of the present work are outlined below, Mesoporous TiO2 was prepared by the cationic surfactant P123 assisted hydrothermal synthesis route and conducting polymer modified TiO2 nanocomposites were also prepared via the same technique. All the prepared systems show XRD pattern corresponding to anatase phase of TiO2, which means that there is no phase change occurring even after conducting polymer modification. Raman spectroscopy gives supporting evidence for the XRD results. It also confirms the incorporation of the polymer. The mesoporous nature and surface area of the prepared samples were analysed by N2 adsorption desorption studies and the mesoporous ordering can be confirmed by low angle XRD measurementThe morphology of the prepared samples was obtained from both SEM & TEM. The elemental analysis of the samples was performed by EDX analysisThe hybrid composite formation is confirmed by FT-IR spectroscopy and X-ray photoelectron spectroscopyAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systemsAll the prepared samples have been used for the photocatalytic degradation of dyes, antibiotic, endocrine disruptors and some other organic pollutants. Photocatalytic antibacterial activity studies were also performed using the prepared systems Polyaniline modified TiO2 nanocomposite systems were found to have good antibacterial activity. Thermal diffusivity studies of the polyaniline modified systems were carried out using thermal lens technique. It is observed that as the amount of polyaniline in the composite increases the thermal diffusivity also increases. The prepared systems can be used as an excellent coolant in various industrial purposes. Nonlinear optical properties (3rd order nonlinearity) of the polyaniline modified systems were studied using Z scan technique. The prepared materials can be used for optical limiting Applications. Lasing studies of polyaniline modified TiO2 systems were carried out and the studies reveal that TiO2 - Polyaniline composite is a potential dye laser gain medium.

Compositional analysis of archaeological glasses

At CoDaWork'03 we presented work on the analysis of archaeological glass composi- tional data. Such data typically consist of geochemical compositions involving 10-12 variables and approximates completely compositional data if the main component, sil- ica, is included. We suggested that what has been termed `crude' principal component analysis (PCA) of standardized data often identi ed interpretable pattern in the data more readily than analyses based on log-ratio transformed data (LRA). The funda- mental problem is that, in LRA, minor oxides with high relative variation, that may not be structure carrying, can dominate an analysis and obscure pattern associated with variables present at higher absolute levels. We investigate this further using sub- compositional data relating to archaeological glasses found on Israeli sites. A simple model for glass-making is that it is based on a `recipe' consisting of two `ingredients', sand and a source of soda. Our analysis focuses on the sub-composition of components associated with the sand source. A `crude' PCA of standardized data shows two clear compositional groups that can be interpreted in terms of di erent recipes being used at di erent periods, re ected in absolute di erences in the composition. LRA analysis can be undertaken either by normalizing the data or de ning a `residual'. In either case, after some `tuning', these groups are recovered. The results from the normalized LRA are di erently interpreted as showing that the source of sand used to make the glass di ered. These results are complementary. One relates to the recipe used. The other relates to the composition (and presumed sources) of one of the ingredients. It seems to be axiomatic in some expositions of LRA that statistical analysis of compositional data should focus on relative variation via the use of ratios. Our analysis suggests that absolute di erences can also be informative

Studies in stoichiometry with compositional data

Geochemical data that is derived from the whole or partial analysis of various geologic materials represent a composition of mineralogies or solute species. Minerals are composed of structured relationships between cations and anions which, through atomic and molecular forces, keep the elements bound in specific configurations. The chemical compositions of minerals have specific relationships that are governed by these molecular controls. In the case of olivine, there is a well-defined relationship between Mn-Fe-Mg with Si. Balances between the principal elements defining olivine composition and other significant constituents in the composition (Al, Ti) have been defined, resulting in a near-linear relationship between the logarithmic relative proportion of Si versus (MgMnFe) and Mg versus (MnFe), which is typically described but poorly illustrated in the simplex. The present contribution corresponds to ongoing research, which attempts to relate stoichiometry and geochemical data using compositional geometry. We describe here the approach by which stoichiometric relationships based on mineralogical constraints can be accounted for in the space of simplicial coordinates using olivines as an example. Further examples for other mineral types (plagioclases and more complex minerals such as clays) are needed. Issues that remain to be dealt with include the reduction of a bulk chemical composition of a rock comprised of several minerals from which appropriate balances can be used to describe the composition in a realistic mineralogical framework. The overall objective of our research is to answer the question: In the cases where the mineralogy is unknown, are there suitable proxies that can be substituted? Kew words: Aitchison geometry, balances, mineral composition, oxides

Parque Natural de Somiedo : itinerarios did??cticos en la naturaleza. Gu??a del profesor

Desde el Principado de Asturias, se desarrolla un programa de Educaci??n Ambiental, en el que se facilita la realizaci??n de diversos itinerarios did??cticos en espacios naturales protegidos como es el caso de la Reserva Natural de Somiedo en la zona de monta??a de Asturias. En esta gu??a del profesor se ofrecen datos sobre el parque: su situaci??n, historia, climatolog??a (al ser un ??rea de monta??a esta es especialmente adversa, por lo que se estudian factores determinantes como latitud, continentalidad y altitud), la geolog??a (definiendo las de formaciones geol??gicas y el glaciarismo, de los que hay ejemplos significativos en las zonas de lagos y monta??a del parque), los suelos, la vegetaci??n (describiendo las especies m??s comunes en la zona), la fauna (mencionando especialmente las especies que corren riesgo de desaparecer) y sobre los modelos tradicionales de explotaci??n (rasgos etnogr??ficos: vivienda, construcciones, usos y costumbres, etc.) El itinerario est?? marcado en un mapa con sus correspondientes etapas. Finalmente se ofrece una relaci??n de actividades previas a la visita, trabajando mapas, datos sobre el clima, estudio de la zona, etc..

Nuevos riesgos ambientales y derecho administrativo

El objetivo de este trabajo investigativo, consiste en determinar los mecanismos que contempla el derecho administrativo para materializar el principio de precaución, enfocado a la eficiente protección del medio ambiente. En resumen, se trata de analizar el funcionamiento y la estructura de las diferentes herramientas jurídicas que se aplican para prevenir la causación de riesgos en el medio ambiente El enfoque conceptual que se empleó, se basó en el concepto de “análisis jurídico del riesgo ambiental” para realizar una aproximación a la naturaleza de este, exponer los mecanismos de evaluación de riesgos dentro del derecho administrativo, y finalizar con un análisis del papel que cumple la administración en el manejo, control y represión frente a la causación de estos riesgos ambientales.

MA167exam01pdf

Exam questions and solutions in PDF

Preliminares

--

Perfil epidemiológico de la prevalencia de hipoacusia en un grupo de empleados que trabaja en el ambiente urbano, 2015

El propósito de este estudio es determinar la relación entre la exposición ocupacional y los niveles de audición en trabajadores urbanos en espacio abierto (aseo urbano en general). Se realizó un estudio de corte transversal con 491 personas que incluyen hombres y mujeres, cuyo ambiente laboral es el espacio abierto de la ciudad. Los datos se obtuvieron durante los exámenes médicos periódicos realizados en el año 2014 a los empleados de una empresa cuya actividad económica es el aseo urbano, que incluye recolección de basuras, cuidado forestal y de prados de uso común, y limpieza del borde de los andenes. Se realizó estadística descriptiva para las características demográficas y razón de disparidad u Odds Ratio (OR) para buscar la relación de antecedentes y hábitos personales con el riesgo de desarrollar pérdida auditiva. De las 491 personas expuestas a niveles altos de ruido ocupacional, 62% presentó pérdida auditiva, de los cuales la mayoría se desempeña como guadañadores y cortadores de césped, y son personas que llevan trabajando entre 1-5 años en la empresa. Se encontró un aumento estadísticamente significativo entre la baja escolaridad y el riesgo de sufrir hipoacusia (p=0.0001) y un efecto protector del uso de motocicleta y audífonos. La enfermedad vascular periférica, la práctica de tejo y la diabetes mostraron una fuerte tendencia a aumentar el riesgo. La pérdida auditiva encontrada en este grupo no se puede relacionar directamente con la exposición ocupacional a ruido, a pesar de ser trabajos que se llevan a cabo en el espacio urbano. Sin embargo, la baja escolaridad favorece la lesión auditiva y puede verse acelerada por enfermedades de alta prevalencia como diabetes y practicas recreacionales locales.

Matemáticas : resolución de problemas.

Resumen tomado del autor. Incluye un CD-ROM que recoge numerosos ejemplos para trabajar la resolución de problemas de distintos tipos, al tiempo que se aportan ideas para que el profesorado diseñe sus propias propuestas y actividades