Scientific use of the finite element method in Orthodontics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantificação de parâmetros da dinâmica da bandeja do basquetebol por variáveis temporais do salto e antropométricas

The objective of this research study was quantify the power, force of vertical impulse, jumping height and the relation of the power output during the execution of the layup in basketball, by variables associated to anthropometric data. The study was carried with seven basketball players, university students, male, from the Universidade Estadual Paulista Julio Mesquita Filho (Unesp) basketball team, from Bauru City. The players were an age of 20,7 ± 2,4 years old, body weight of 77,1 ± 9,4 kg, body fat of 14,7 ± 3,6%, lean mass of 65,5 ± 6,2 kg and height of 180,0 ± 5,0 cm. Each player did the ability of the layup three times, with a previous time to adapt. The kinetic and kinematic values was obtained from the data of a system that consists of photocells and a contact carpet from a system called JumpSystemâ (CEFISE), using after that equations of UVRM and impulse. The photocells was dispose to capture the previous run-up, as well the speedy in the time of two steps of the layup, and it was also synchronized with the contact carpet in the last step, to preserve the exactly time of the propulsion of jump. In this way, the values and the kinetic variables found was vV (2,94 ± 0,3 m's-1), vH (11,3 ± 3,4 m's-1), vI (11,8 ± 3,2 m's-1), time of contact (0,214 ± 0,2 s), angle of jump (15,9 ± 6,26 graus) and H (44,3 ± 8,9 cm). The variables and the kinematic values found was FimpV (974,9 ± 119,03 N, PP (3112,9 ± 633,9 W) and PM (1556,4 ± 316,9 W). To better understand the ability of layup in basketball, as the kinetic variables, kinematic variables and anthropometrics that determine the performance, the study did correlations between dV (H) with vV, vH, vI, angle, FimpV, PP e PM; FimpV, PP e PM com with the kinetic variables of vV, vH, vI, angle, and anthropometric variables of PC and height, and correlations of PP e PM with %G and MM. So, significant results was found between the correlations of dV with FimpV (R2 = 0,81)...

Effects of gaseous atmosphere and antioxidants on the development and cryotolerance of bovine embryos at different periods of in vitro culture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of random/aligned nylon-6/MWCNT fibers on dental resin composite reinforcement

The aims of this study were (1) to synthesize and characterize random and aligned nanocomposite fibers of multi-walled carbon nanotubes (MWCNT)/nylon-6 and (2) to determine their reinforcing effects on the flexural strength of a dental resin composite.Nylon-6 was dissolved in hexafluoropropanol (10 wt%), followed by the addition of MWCNT (hereafter referred to as nanotubes) at two distinct concentrations (i.e., 0.5 or 1.5 wt%). Neat nylon-6 fibers (without nanotubes) were also prepared. The solutions were electrospun using parameters under low- (120 rpm) or high-speed (6000 rpm) mandrel rotation to collect random and aligned fibers, respectively. The processed fiber mats were characterized by scanning (SEM) and transmission (TEM) electron microscopies, as well as by uni-axial tensile testing. To determine the reinforcing effects on the flexural strength of a dental resin composite, bar-shaped (20 x 2 x 2 mm(3)) resin composite specimens were prepared by first placing one increment of the composite, followed by one strip of the mat, and one last increment of composite. Non-reinforced composite specimens were used as the control. The specimens were then evaluated using flexural strength testing. SEM was done on the fractured surfaces. The data were analyzed using ANOVA and the Tukey's test (alpha=5%).Nanotubes were successfully incorporated into the nylon-6 fibers. Aligned and random fibers were obtained using high- and low-speed electrospinning, respectively, where the former were significantly (p<0.001) stronger than the latter, regardless of the nanotubes'presence. Indeed, the dental resin composite tested was significantly reinforced when combined with nylon-6 fibrous mats composed of aligned fibers (with or without nanotubes) or random fibers incorporated with nanotubes at 0.5 wt%. (C) 2015 Elsevier Ltd. All rights reserved.

Dynamics of a charged particle in a dissipative Fermi-Ulam model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlation between heart rate variability indexes and aerobic physiological variables in patients with COPD

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de tratamentos termo-mecânicos na estrutura e microestrutura da liga Ti-10%pNi obtida por fusão a arco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do acabamento superficial e força de corte no torneamento de alumina a verde

In experimental conditions, cutting forces were studied during turning of green alumina billets, including their correlation with surface aspects of the workpiece. The correlation between cutting power and the removal rate are important parameters for defining the design of ceramic products, since inadequate parameters can produce excessive surface damage to the workpiece. This study examined the forces obtained during turning of alumina workpieces with 99.8% purity in their green state, by means of a three-point dynamometer, evaluating the cutting, feed and depth forces, using a cermet tool under constant machining conditions. Variables were compared with the forces, including surface finish, tool wear and temperature during machining. In the study, it was found that the depth of cut had no significant effect on the surface quality, and the cutting speed and feed influencing the finish. However, preliminary tests for selecting the cutting conditions showed that unsuitables cutting speeds and feeds generate severe damage to the workpiece surface. The best condition was 1.00 mm depth of cut, and the forces increasedfor with each pass performed, with the feed force the variable with greatest increases in relation to the cutting and depth forces, and wear of the cutting tool directly influenced the surface finish, generated by the highly abrasive nature of the alumina particles of the green compact. It is emphasized that the alumina in its green state showed high abrasive effect on the cutting tool during the turning process and the surface finishing of the green workpiece had a direct influence on the sintered workpiece.

Avaliação dos parâmetros tempo, corrente e pressão na soldagem por resistência elétrica de compósitos PEI/fibras contínuas: influência na resistência mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lumped Element Modeling of a Flexible Manipulator System

This paper is concerned with a modeling method that can be used for an experimental identification of a dynamic system. More specifically, an equivalent lumped element system is presented to represent in a unique and exact manner a complete proportional-derivative (PD) controlled servo positioning system having a flexible manipulator. The impedance and mobility approach is used to transform the P and D control gains to an electrical spring and an electrical damper, respectively. The impedance model method is used to transform the flexible manipulator to a coupled system between a single contact mass at the driving position and a series of noncontact masses each of which is connected to the contact mass via a resilient member. This method is applicable whenever the driving point response of such a manipulator is available. Experimental work is presented to support the theory developed.

Fertirrigação na produção de mudas de Eucalyptus grandis nos períodos de inverno e verão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da rotação ombro-quadril e co-contração muscular do tronco durante um movimento de rotação axial com manuseio de carga

Pós-graduação em Engenharia Mecânica - FEG

Avaliação proteômica do conteúdo vaginal em resposta ao tratamento da vaginose bacteriana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação e correlação da presença de endotoxinas e MMP-3, -8 e -9 em canais radiculares com necrose pulpar submetidos ao tratamento endodôntico - estudo in vivo

It is know that endotoxin and various matrix metalloproteinases (MMPs) are involved in the development of periapical lesions. The purpose of this study was to evaluate and correlate the presence of endotoxins and MMP- 3, MMP-8 and MMP-9 in root canals of teeth with necrotic pulp and periapical lesion before, during and after the biomechanical preparation (PBM) using a combination of different irrigations solutions and intracanal dressing. Thirty-three single-root teeth with a diagnosis of pulp necrosis and periapical lesion radiographically visible were selected. Immediately after the coronal opening was collected the first sample from the root canal content. Then, all canals were prepared (cervical and middle thirds) by oscillatory instruments (EndoEze) and irrigated by 2.5% NaOCl. After, a manual preparation was made for the apical third and the teeth were divided into three groups according to the irrigation protocol: G1) 2.5% NaOCl (4 manual files); G2) 2.5% NaOCl (2 manual files) + [Ca (OH)2 0.14%] (2 manual files) and G3) 2.5% NaOCl (2 manual files) + polymyxin B (2 manual files). After the PBM, the second sample was collected; then the third collect was performed after using EDTA final flush. The fourth sample was collected 14 days after placing the dressing [2% chlorhexidine gel + Ca(OH)2]. Quantification of endotoxins was performed by a kinetic chromogenic lysate from amoebocytes of Limulus (LAL) and quantification of MMPs by ELISA assay. The results were analyzed statistically by Kruskal-Wallis and Dunn's test (5%) and ordinal Spearman correlation. Presence of endotoxin was observed in 100% of cases and G3 showed the greatest reduction of endotoxins from the 1st to the 2nd samples (97%), being statistically similar to G2 (84.2%) and different from G1 (49.4%) (p<0.05). The intracanal dressing promoted a significant reduction of endotoxin, no difference among the groups. For...

Vibrational and rotational spectroscopy of (CD3OD)-C-13

We have used Fourier Transform spectral data on the C-O stretching mode of (CD3OD)-C-13 in order to perform a vibro-rotational analysis for this molecule. We have estimated a few molecular parameters of the ground and C-O stretching vibrational modes. Based on these parameters, and by using the Kwan-Dennison model, we propose assignments for a number of far-infrared laser transitions of (CD3OD)-C-13.