Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.

Co-simulation Methodologies for Hybrid and Electric Vehicle Dynamics

In recent decades, full electric and hybrid electric vehicles have emerged as an alternative to conventional cars due to a range of factors, including environmental and economic aspects. These vehicles are the result of considerable efforts to seek ways of reducing the use of fossil fuel for vehicle propulsion. Sophisticated technologies such as hybrid and electric powertrains require careful study and optimization. Mathematical models play a key role at this point. Currently, many advanced mathematical analysis tools, as well as computer applications have been built for vehicle simulation purposes. Given the great interest of hybrid and electric powertrains, along with the increasing importance of reliable computer-based models, the author decided to integrate both aspects in the research purpose of this work. Furthermore, this is one of the first final degree projects held at the ETSII (Higher Technical School of Industrial Engineers) that covers the study of hybrid and electric propulsion systems. The present project is based on MBS3D 2.0, a specialized software for the dynamic simulation of multibody systems developed at the UPM Institute of Automobile Research (INSIA). Automobiles are a clear example of complex multibody systems, which are present in nearly every field of engineering. The work presented here benefits from the availability of MBS3D software. This program has proven to be a very efficient tool, with a highly developed underlying mathematical formulation. On this basis, the focus of this project is the extension of MBS3D features in order to be able to perform dynamic simulations of hybrid and electric vehicle models. This requires the joint simulation of the mechanical model of the vehicle, together with the model of the hybrid or electric powertrain. These sub-models belong to completely different physical domains. In fact the powertrain consists of energy storage systems, electrical machines and power electronics, connected to purely mechanical components (wheels, suspension, transmission, clutch…). The challenge today is to create a global vehicle model that is valid for computer simulation. Therefore, the main goal of this project is to apply co-simulation methodologies to a comprehensive model of an electric vehicle, where sub-models from different areas of engineering are coupled. The created electric vehicle (EV) model consists of a separately excited DC electric motor, a Li-ion battery pack, a DC/DC chopper converter and a multibody vehicle model. Co-simulation techniques allow car designers to simulate complex vehicle architectures and behaviors, which are usually difficult to implement in a real environment due to safety and/or economic reasons. In addition, multi-domain computational models help to detect the effects of different driving patterns and parameters and improve the models in a fast and effective way. Automotive designers can greatly benefit from a multidisciplinary approach of new hybrid and electric vehicles. In this case, the global electric vehicle model includes an electrical subsystem and a mechanical subsystem. The electrical subsystem consists of three basic components: electric motor, battery pack and power converter. A modular representation is used for building the dynamic model of the vehicle drivetrain. This means that every component of the drivetrain (submodule) is modeled separately and has its own general dynamic model, with clearly defined inputs and outputs. Then, all the particular submodules are assembled according to the drivetrain configuration and, in this way, the power flow across the components is completely determined. Dynamic models of electrical components are often based on equivalent circuits, where Kirchhoff’s voltage and current laws are applied to draw the algebraic and differential equations. Here, Randles circuit is used for dynamic modeling of the battery and the electric motor is modeled through the analysis of the equivalent circuit of a separately excited DC motor, where the power converter is included. The mechanical subsystem is defined by MBS3D equations. These equations consider the position, velocity and acceleration of all the bodies comprising the vehicle multibody system. MBS3D 2.0 is entirely written in MATLAB and the structure of the program has been thoroughly studied and understood by the author. MBS3D software is adapted according to the requirements of the applied co-simulation method. Some of the core functions are modified, such as integrator and graphics, and several auxiliary functions are added in order to compute the mathematical model of the electrical components. By coupling and co-simulating both subsystems, it is possible to evaluate the dynamic interaction among all the components of the drivetrain. ‘Tight-coupling’ method is used to cosimulate the sub-models. This approach integrates all subsystems simultaneously and the results of the integration are exchanged by function-call. This means that the integration is done jointly for the mechanical and the electrical subsystem, under a single integrator and then, the speed of integration is determined by the slower subsystem. Simulations are then used to show the performance of the developed EV model. However, this project focuses more on the validation of the computational and mathematical tool for electric and hybrid vehicle simulation. For this purpose, a detailed study and comparison of different integrators within the MATLAB environment is done. Consequently, the main efforts are directed towards the implementation of co-simulation techniques in MBS3D software. In this regard, it is not intended to create an extremely precise EV model in terms of real vehicle performance, although an acceptable level of accuracy is achieved. The gap between the EV model and the real system is filled, in a way, by introducing the gas and brake pedals input, which reflects the actual driver behavior. This input is included directly in the differential equations of the model, and determines the amount of current provided to the electric motor. For a separately excited DC motor, the rotor current is proportional to the traction torque delivered to the car wheels. Therefore, as it occurs in the case of real vehicle models, the propulsion torque in the mathematical model is controlled through acceleration and brake pedal commands. The designed transmission system also includes a reduction gear that adapts the torque coming for the motor drive and transfers it. The main contribution of this project is, therefore, the implementation of a new calculation path for the wheel torques, based on performance characteristics and outputs of the electric powertrain model. Originally, the wheel traction and braking torques were input to MBS3D through a vector directly computed by the user in a MATLAB script. Now, they are calculated as a function of the motor current which, in turn, depends on the current provided by the battery pack across the DC/DC chopper converter. The motor and battery currents and voltages are the solutions of the electrical ODE (Ordinary Differential Equation) system coupled to the multibody system. Simultaneously, the outputs of MBS3D model are the position, velocity and acceleration of the vehicle at all times. The motor shaft speed is computed from the output vehicle speed considering the wheel radius, the gear reduction ratio and the transmission efficiency. This motor shaft speed, somehow available from MBS3D model, is then introduced in the differential equations corresponding to the electrical subsystem. In this way, MBS3D and the electrical powertrain model are interconnected and both subsystems exchange values resulting as expected with tight-coupling approach.When programming mathematical models of complex systems, code optimization is a key step in the process. A way to improve the overall performance of the integration, making use of C/C++ as an alternative programming language, is described and implemented. Although this entails a higher computational burden, it leads to important advantages regarding cosimulation speed and stability. In order to do this, it is necessary to integrate MATLAB with another integrated development environment (IDE), where C/C++ code can be generated and executed. In this project, C/C++ files are programmed in Microsoft Visual Studio and the interface between both IDEs is created by building C/C++ MEX file functions. These programs contain functions or subroutines that can be dynamically linked and executed from MATLAB. This process achieves reductions in simulation time up to two orders of magnitude. The tests performed with different integrators, also reveal the stiff character of the differential equations corresponding to the electrical subsystem, and allow the improvement of the cosimulation process. When varying the parameters of the integration and/or the initial conditions of the problem, the solutions of the system of equations show better dynamic response and stability, depending on the integrator used. Several integrators, with variable and non-variable step-size, and for stiff and non-stiff problems are applied to the coupled ODE system. Then, the results are analyzed, compared and discussed. From all the above, the project can be divided into four main parts: 1. Creation of the equation-based electric vehicle model; 2. Programming, simulation and adjustment of the electric vehicle model; 3. Application of co-simulation methodologies to MBS3D and the electric powertrain subsystem; and 4. Code optimization and study of different integrators. Additionally, in order to deeply understand the context of the project, the first chapters include an introduction to basic vehicle dynamics, current classification of hybrid and electric vehicles and an explanation of the involved technologies such as brake energy regeneration, electric and non-electric propulsion systems for EVs and HEVs (hybrid electric vehicles) and their control strategies. Later, the problem of dynamic modeling of hybrid and electric vehicles is discussed. The integrated development environment and the simulation tool are also briefly described. The core chapters include an explanation of the major co-simulation methodologies and how they have been programmed and applied to the electric powertrain model together with the multibody system dynamic model. Finally, the last chapters summarize the main results and conclusions of the project and propose further research topics. In conclusion, co-simulation methodologies are applicable within the integrated development environments MATLAB and Visual Studio, and the simulation tool MBS3D 2.0, where equation-based models of multidisciplinary subsystems, consisting of mechanical and electrical components, are coupled and integrated in a very efficient way.

Evaluación estocástica de huecos de tensión en sistemas eléctricos: estudio de sensibilidad, estimación de índices y localización óptima de medidores

I. GENERALIDADES 1.1. Introducción Entre los diversos tipos de perturbaciones eléctricas, los huecos de tensión son considerados el problema de calidad de suministro más frecuente en los sistemas eléctricos. Este fenómeno es originado por un aumento extremo de la corriente en el sistema, causado principalmente por cortocircuitos o maniobras inadecuadas en la red. Este tipo de perturbación eléctrica está caracterizado básicamente por dos parámetros: tensión residual y duración. Típicamente, se considera que el hueco se produce cuando la tensión residual alcanza en alguna de las fases un valor entre 0.01 a 0.9 pu y tiene una duración de hasta 60 segundos. Para un usuario final, el efecto más relevante de un hueco de tensión es la interrupción o alteración de la operación de sus equipos, siendo los dispositivos de naturaleza electrónica los principalmente afectados (p. ej. ordenador, variador de velocidad, autómata programable, relé, etc.). Debido al auge tecnológico de las últimas décadas y a la búsqueda constante de automatización de los procesos productivos, el uso de componentes electrónicos resulta indispensable en la actualidad. Este hecho, lleva a que los efectos de los huecos de tensión sean más evidentes para el usuario final, provocando que su nivel de exigencia de la calidad de energía suministrada sea cada vez mayor. De forma general, el estudio de los huecos de tensión suele ser abordado bajo dos enfoques: en la carga o en la red. Desde el punto de vista de la carga, se requiere conocer las características de sensibilidad de los equipos para modelar su respuesta ante variaciones súbitas de la tensión del suministro eléctrico. Desde la perspectiva de la red, se busca estimar u obtener información adecuada que permita caracterizar su comportamiento en términos de huecos de tensión. En esta tesis, el trabajo presentado se encuadra en el segundo aspecto, es decir, en el modelado y estimación de la respuesta de un sistema eléctrico de potencia ante los huecos de tensión. 1.2. Planteamiento del problema A pesar de que los huecos de tensión son el problema de calidad de suministro más frecuente en las redes, hasta la actualidad resulta complejo poder analizar de forma adecuada este tipo de perturbación para muchas compañías del sector eléctrico. Entre las razones más comunes se tienen: - El tiempo de monitorización puede llegar a ser de varios años para conseguir una muestra de registros de huecos estadísticamente válida. - La limitación de recursos económicos para la adquisición e instalación de equipos de monitorización de huecos. - El elevado coste operativo que implica el análisis de los datos de los medidores de huecos de tensión instalados. - La restricción que tienen los datos de calidad de energía de las compañías eléctricas. Es decir, ante la carencia de datos que permitan analizar con mayor detalle los huecos de tensión, es de interés de las compañías eléctricas y la academia poder crear métodos fiables que permitan profundizar en el estudio, estimación y supervisión de este fenómeno electromagnético. Los huecos de tensión, al ser principalmente originados por eventos fortuitos como los cortocircuitos, son el resultado de diversas variables exógenas como: (i) la ubicación de la falta, (ii) la impedancia del material de contacto, (iii) el tipo de fallo, (iv) la localización del fallo en la red, (v) la duración del evento, etc. Es decir, para plantear de forma adecuada cualquier modelo teórico sobre los huecos de tensión, se requeriría representar esta incertidumbre combinada de las variables para proveer métodos realistas y, por ende, fiables para los usuarios. 1.3. Objetivo La presente tesis ha tenido como objetivo el desarrollo diversos métodos estocásticos para el estudio, estimación y supervisión de los huecos de tensión en los sistemas eléctricos de potencia. De forma específica, se ha profundizado en los siguientes ámbitos: - En el modelado realista de las variables que influyen en la caracterización de los huecos. Esto es, en esta Tesis se ha propuesto un método que permite representar de forma verosímil su cuantificación y aleatoriedad en el tiempo empleando distribuciones de probabilidad paramétricas. A partir de ello, se ha creado una herramienta informática que permite estimar la severidad de los huecos de tensión en un sistema eléctrico genérico. - Se ha analizado la influencia la influencia de las variables de entrada en la estimación de los huecos de tensión. En este caso, el estudio se ha enfocado en las variables de mayor divergencia en su caracterización de las propuestas existentes. - Se ha desarrollado un método que permite estima el número de huecos de tensión de una zona sin monitorización a través de la información de un conjunto limitado de medidas de un sistema eléctrico. Para ello, se aplican los principios de la estadística Bayesiana, estimando el número de huecos de tensión más probable de un emplazamiento basándose en los registros de huecos de otros nudos de la red. - Plantear una estrategia para optimizar la monitorización de los huecos de tensión en un sistema eléctrico. Es decir, garantizar una supervisión del sistema a través de un número de medidores menor que el número de nudos de la red. II. ESTRUCTURA DE LA TESIS Para plantear las propuestas anteriormente indicadas, la presente Tesis se ha estructurado en seis capítulos. A continuación, se describen brevemente los mismos. A manera de capítulo introductorio, en el capítulo 1, se realiza una descripción del planteamiento y estructura de la presente tesis. Esto es, se da una visión amplia de la problemática a tratar, además de describir el alcance de cada capítulo de la misma. En el capítulo 2, se presenta una breve descripción de los fundamentos y conceptos generales de los huecos de tensión. Los mismos, buscan brindar al lector de una mejor comprensión de los términos e indicadores más empleados en el análisis de severidad de los huecos de tensión en las redes eléctricas. Asimismo, a manera de antecedente, se presenta un resumen de las principales características de las técnicas o métodos existentes aplicados en la predicción y monitorización óptima de los huecos de tensión. En el capítulo 3, se busca fundamentalmente conocer la importancia de las variables que determinen la frecuencia o severidad de los huecos de tensión. Para ello, se ha implementado una herramienta de estimación de huecos de tensión que, a través de un conjunto predeterminado de experimentos mediante la técnica denominada Diseño de experimentos, analiza la importancia de la parametrización de las variables de entrada del modelo. Su análisis, es realizado mediante la técnica de análisis de la varianza (ANOVA), la cual permite establecer con rigor matemático si la caracterización de una determinada variable afecta o no la respuesta del sistema en términos de los huecos de tensión. En el capítulo 4, se propone una metodología que permite predecir la severidad de los huecos de tensión de todo el sistema a partir de los registros de huecos de un conjunto reducido de nudos de dicha red. Para ello, se emplea el teorema de probabilidad condicional de Bayes, el cual calcula las medidas más probables de todo el sistema a partir de la información proporcionada por los medidores de huecos instalados. Asimismo, en este capítulo se revela una importante propiedad de los huecos de tensión, como es la correlación del número de eventos de huecos de tensión en diversas zonas de las redes eléctricas. En el capítulo 5, se desarrollan dos métodos de localización óptima de medidores de huecos de tensión. El primero, que es una evolución metodológica del criterio de observabilidad; aportando en el realismo de la pseudo-monitorización de los huecos de tensión con la que se calcula el conjunto óptimo de medidores y, por ende, en la fiabilidad del método. Como una propuesta alternativa, se emplea la propiedad de correlación de los eventos de huecos de tensión de una red para plantear un método que permita establecer la severidad de los huecos de todo el sistema a partir de una monitorización parcial de dicha red. Finalmente, en el capítulo 6, se realiza una breve descripción de las principales aportaciones de los estudios realizados en esta tesis. Adicionalmente, se describen diversos temas a desarrollar en futuros trabajos. III. RESULTADOS En base a las pruebas realizadas en las tres redes planteadas; dos redes de prueba IEEE de 24 y 118 nudos (IEEE-24 e IEEE-118), además del sistema eléctrico de la República del Ecuador de 357 nudos (EC-357), se describen los siguientes puntos como las observaciones más relevantes: A. Estimación de huecos de tensión en ausencia de medidas: Se implementa un método estocástico de estimación de huecos de tensión denominado PEHT, el cual representa con mayor realismo la simulación de los eventos de huecos de un sistema a largo plazo. Esta primera propuesta de la tesis, es considerada como un paso clave para el desarrollo de futuros métodos del presente trabajo, ya que permite emular de forma fiable los registros de huecos de tensión a largo plazo en una red genérica. Entre las novedades más relevantes del mencionado Programa de Estimación de Huecos de Tensión (PEHT) se tienen: - Considerar el efecto combinado de cinco variables aleatorias de entrada para simular los eventos de huecos de tensión en una pseudo-monitorización a largo plazo. Las variables de entrada modeladas en la caracterización de los huecos de tensión en el PEHT son: (i) coeficiente de fallo, (ii) impedancia de fallo, (iii) tipo de fallo, (iv) localización del fallo y (v) duración. - El modelado estocástico de las variables de entrada impedancia de fallo y duración en la caracterización de los eventos de huecos de tensión. Para la parametrización de las variables mencionadas, se realizó un estudio detallado del comportamiento real de las mismas en los sistemas eléctricos. Asimismo, se define la función estadística que mejor representa la naturaleza aleatoria de cada variable. - Considerar como variables de salida del PEHT a indicadores de severidad de huecos de uso común en las normativas, como es el caso de los índices: SARFI-X, SARFI-Curve, etc. B. Análisis de sensibilidad de los huecos de tensión: Se presenta un estudio causa-efecto (análisis de sensibilidad) de las variables de entrada de mayor divergencia en su parametrización entre las referencias relacionadas a la estimación de los huecos de tensión en redes eléctricas. De forma específica, se profundiza en el estudio de la influencia de la parametrización de las variables coeficiente de fallo e impedancia de fallo en la predicción de los huecos de tensión. A continuación un resumen de las conclusiones más destacables: - La precisión de la variable de entrada coeficiente de fallo se muestra como un parámetro no influyente en la estimación del número de huecos de tensión (SARFI-90 y SARFI-70) a largo plazo. Es decir, no se requiere de una alta precisión del dato tasa de fallo de los elementos del sistema para obtener una adecuada estimación de los huecos de tensión. - La parametrización de la variable impedancia de fallo se muestra como un factor muy sensible en la estimación de la severidad de los huecos de tensión. Por ejemplo, al aumentar el valor medio de esta variable aleatoria, se disminuye considerablemente la severidad reportada de los huecos en la red. Por otra parte, al evaluar el parámetro desviación típica de la impedancia de fallo, se observa una relación directamente proporcional de este parámetro con la severidad de los huecos de tensión de la red. Esto es, al aumentar la desviación típica de la impedancia de fallo, se evidencia un aumento de la media y de la variación interanual de los eventos SARFI-90 y SARFI-70. - En base al análisis de sensibilidad desarrollado en la variable impedancia de fallo, se considera muy cuestionable la fiabilidad de los métodos de estimación de huecos de tensión que omiten su efecto en el modelo planteado. C. Estimación de huecos de tensión en base a la información de una monitorización parcial de la red: Se desarrolla un método que emplea los registros de una red parcialmente monitorizada para determinar la severidad de los huecos de todo el sistema eléctrico. A partir de los casos de estudio realizados, se observa que el método implementado (PEHT+MP) posee las siguientes características: - La metodología propuesta en el PEHT+MP combina la teoría clásica de cortocircuitos con diversas técnicas estadísticas para estimar, a partir de los datos de los medidores de huecos instalados, las medidas de huecos de los nudos sin monitorización de una red genérica. - El proceso de estimación de los huecos de tensión de la zona no monitorizada de la red se fundamenta en la aplicación del teorema de probabilidad condicional de Bayes. Es decir, en base a los datos observados (los registros de los nudos monitorizados), el PEHT+MP calcula de forma probabilística la severidad de los huecos de los nudos sin monitorización del sistema. Entre las partes claves del procedimiento propuesto se tienen los siguientes puntos: (i) la creación de una base de datos realista de huecos de tensión a través del Programa de Estimación de Huecos de Tensión (PEHT) propuesto en el capítulo anterior; y, (ii) el criterio de máxima verosimilitud empleado para estimar las medidas de huecos de los nudos sin monitorización de la red evaluada. - Las predicciones de medidas de huecos de tensión del PEHT+MP se ven potenciadas por la propiedad de correlación de los huecos de tensión en diversas zonas de un sistema eléctrico. Esta característica intrínseca de las redes eléctricas limita de forma significativa la respuesta de las zonas fuertemente correlacionadas del sistema ante un eventual hueco de tensión. Como el PEHT+MP está basado en principios probabilísticos, la reducción del rango de las posibles medidas de huecos se ve reflejado en una mejor predicción de las medidas de huecos de la zona no monitorizada. - Con los datos de un conjunto de medidores relativamente pequeño del sistema, es posible obtener estimaciones precisas (error nulo) de la severidad de los huecos de la zona sin monitorizar en las tres redes estudiadas. - El PEHT+MP se puede aplicar a diversos tipos de indicadores de severidad de los huecos de tensión, como es el caso de los índices: SARFI-X, SARFI-Curve, SEI, etc. D. Localización óptima de medidores de huecos de tensión: Se plantean dos métodos para ubicar de forma estratégica al sistema de monitorización de huecos en una red genérica. La primera propuesta, que es una evolución metodológica de la localización óptima de medidores de huecos basada en el criterio de observabilidad (LOM+OBS); y, como segunda propuesta, un método que determina la localización de los medidores de huecos según el criterio del área de correlación (LOM+COR). Cada método de localización óptima de medidores propuesto tiene un objetivo concreto. En el caso del LOM+OBS, la finalidad del método es determinar el conjunto óptimo de medidores que permita registrar todos los fallos que originen huecos de tensión en la red. Por otro lado, en el método LOM+COR se persigue definir un sistema óptimo de medidores que, mediante la aplicación del PEHT+MP (implementado en el capítulo anterior), sea posible estimar de forma precisa las medidas de huecos de tensión de todo el sistema evaluado. A partir del desarrollo de los casos de estudio de los citados métodos de localización óptima de medidores en las tres redes planteadas, se describen a continuación las observaciones más relevantes: - Como la generación de pseudo-medidas de huecos de tensión de los métodos de localización óptima de medidores (LOM+OBS y LOM+COR) se obtienen mediante la aplicación del algoritmo PEHT, la formulación del criterio de optimización se realiza en base a una pseudo-monitorización realista, la cual considera la naturaleza aleatoria de los huecos de tensión a través de las cinco variables estocásticas modeladas en el PEHT. Esta característica de la base de datos de pseudo-medidas de huecos de los métodos LOM+OBS y LOM+COR brinda una mayor fiabilidad del conjunto óptimo de medidores calculado respecto a otros métodos similares en la bibliografía. - El conjunto óptimo de medidores se determina según la necesidad del operador de la red. Esto es, si el objetivo es registrar todos los fallos que originen huecos de tensión en el sistema, se emplea el criterio de observabilidad en la localización óptima de medidores de huecos. Por otra parte, si se plantea definir un sistema de monitorización que permita establecer la severidad de los huecos de tensión de todo el sistema en base a los datos de un conjunto reducido de medidores de huecos, el criterio de correlación resultaría el adecuado. De forma específica, en el caso del método LOM+OBS, basado en el criterio de observabilidad, se evidenciaron las siguientes propiedades en los casos de estudio realizados: - Al aumentar el tamaño de la red, se observa la tendencia de disminuir el porcentaje de nudos monitorizados de dicho sistema. Por ejemplo, para monitorizar los fallos que originan huecos en la red IEEE-24, se requiere monitorizar el 100\% de los nudos del sistema. En el caso de las redes IEEE-118 y EC-357, el método LOM+OBS determina que con la monitorización de un 89.5% y 65.3% del sistema, respectivamente, se cumpliría con el criterio de observabilidad del método. - El método LOM+OBS permite calcular la probabilidad de utilización del conjunto óptimo de medidores a largo plazo, estableciendo así un criterio de la relevancia que tiene cada medidor considerado como óptimo en la red. Con ello, se puede determinar el nivel de precisión u observabilidad (100%, 95%, etc.) con el cual se detectarían los fallos que generan huecos en la red estudiada. Esto es, al aumentar el nivel de precisión de detección de los fallos que originan huecos, se espera que aumente el número de medidores requeridos en el conjunto óptimo de medidores calculado. - El método LOM+OBS se evidencia como una técnica aplicable a todo tipo de sistema eléctrico (radial o mallado), el cual garantiza la detección de los fallos que originan huecos de tensión en un sistema según el nivel de observabilidad planteado. En el caso del método de localización óptima de medidores basado en el criterio del área de correlación (LOM+COR), las diversas pruebas realizadas evidenciaron las siguientes conclusiones: - El procedimiento del método LOM+COR combina los métodos de estimación de huecos de tensión de capítulos anteriores (PEHT y PEHT+MP) con técnicas de optimización lineal para definir la localización óptima de los medidores de huecos de tensión de una red. Esto es, se emplea el PEHT para generar los pseudo-registros de huecos de tensión, y, en base al criterio planteado de optimización (área de correlación), el LOM+COR formula y calcula analíticamente el conjunto óptimo de medidores de la red a largo plazo. A partir de la información registrada por este conjunto óptimo de medidores de huecos, se garantizaría una predicción precisa de la severidad de los huecos de tensión de todos los nudos del sistema con el PEHT+MP. - El método LOM+COR requiere un porcentaje relativamente reducido de nudos del sistema para cumplir con las condiciones de optimización establecidas en el criterio del área de correlación. Por ejemplo, en el caso del número total de huecos (SARFI-90) de las redes IEEE-24, IEEE-118 y EC-357, se calculó un conjunto óptimo de 9, 12 y 17 medidores de huecos, respectivamente. Es decir, solamente se requeriría monitorizar el 38\%, 10\% y 5\% de los sistemas indicados para supervisar los eventos SARFI-90 en toda la red. - El método LOM+COR se muestra como un procedimiento de optimización versátil, el cual permite reducir la dimensión del sistema de monitorización de huecos de redes eléctricas tanto radiales como malladas. Por sus características, este método de localización óptima permite emular una monitorización integral del sistema a través de los registros de un conjunto pequeño de monitores. Por ello, este nuevo método de optimización de medidores sería aplicable a operadores de redes que busquen disminuir los costes de instalación y operación del sistema de monitorización de los huecos de tensión. ABSTRACT I. GENERALITIES 1.1. Introduction Among the various types of electrical disturbances, voltage sags are considered the most common quality problem in power systems. This phenomenon is caused by an extreme increase of the current in the network, primarily caused by short-circuits or inadequate maneuvers in the system. This type of electrical disturbance is basically characterized by two parameters: residual voltage and duration. Typically, voltage sags occur when the residual voltage, in some phases, reaches a value between 0.01 to 0.9 pu and lasts up to 60 seconds. To an end user, the most important effect of a voltage sags is the interruption or alteration of their equipment operation, with electronic devices the most affected (e.g. computer, drive controller, PLC, relay, etc.). Due to the technology boom of recent decades and the constant search for automating production processes, the use of electronic components is essential today. This fact makes the effects of voltage sags more noticeable to the end user, causing the level of demand for a quality energy supply to be increased. In general, the study of voltage sags is usually approached from one of two aspects: the load or the network. From the point of view of the load, it is necessary to know the sensitivity characteristics of the equipment to model their response to sudden changes in power supply voltage. From the perspective of the network, the goal is to estimate or obtain adequate information to characterize the network behavior in terms of voltage sags. In this thesis, the work presented fits into the second aspect; that is, in the modeling and estimation of the response of a power system to voltage sag events. 1.2. Problem Statement Although voltage sags are the most frequent quality supply problem in electrical networks, thistype of disturbance remains complex and challenging to analyze properly. Among the most common reasons for this difficulty are: - The sag monitoring time, because it can take up to several years to get a statistically valid sample. - The limitation of funds for the acquisition and installation of sag monitoring equipment. - The high operating costs involved in the analysis of the voltage sag data from the installed monitors. - The restrictions that electrical companies have with the registered power quality data. That is, given the lack of data to further voltage sag analysis, it is of interest to electrical utilities and researchers to create reliable methods to deepen the study, estimation and monitoring of this electromagnetic phenomenon. Voltage sags, being mainly caused by random events such as short-circuits, are the result of various exogenous variables such as: (i) the number of faults of a system element, (ii) the impedance of the contact material, (iii) the fault type, (iv) the fault location, (v) the duration of the event, etc. That is, to properly raise any theoretical model of voltage sags, it is necessary to represent the combined uncertainty of variables to provide realistic methods that are reliable for users. 1.3. Objective This Thesis has been aimed at developing various stochastic methods for the study, estimation and monitoring of voltage sags in electrical power systems. Specifically, it has deepened the research in the following areas: - This research furthers knowledge in the realistic modeling of the variables that influence sag characterization. This thesis proposes a method to credibly represent the quantification and randomness of the sags in time by using parametric probability distributions. From this, a software tool was created to estimate the severity of voltage sags in a generic power system. - This research also analyzes the influence of the input variables in the estimation of voltage sags. In this case, the study has focused on the variables of greatest divergence in their characterization of the existing proposals. - A method was developed to estimate the number of voltage sags of an area without monitoring through the information of a limited set of sag monitors in an electrical system. To this end, the principles of Bayesian statistics are applied, estimating the number of sags most likely to happen in a system busbar based in records of other sag network busbars. - A strategy was developed to optimize the monitorization of voltage sags on a power system. Its purpose is to ensure the monitoring of the system through a number of monitors lower than the number of busbars of the network assessed. II. THESIS STRUCTURE To describe in detail the aforementioned proposals, this Thesis has been structured into six chapters. Below is are brief descriptions of them: As an introductory chapter, Chapter 1, provides a description of the approach and structure of this thesis. It presents a wide view of the problem to be treated, in addition to the description of the scope of each chapter. In Chapter 2, a brief description of the fundamental and general concepts of voltage sags is presented to provide to the reader a better understanding of the terms and indicators used in the severity analysis of voltage sags in power networks. Also, by way of background, a summary of the main features of existing techniques or methods used in the prediction and optimal monitoring of voltage sags is also presented. Chapter 3 essentially seeks to know the importance of the variables that determine the frequency or severity of voltage sags. To do this, a tool to estimate voltage sags is implemented that, through a predetermined set of experiments using the technique called Design of Experiments, discusses the importance of the parameters of the input variables of the model. Its analysis is interpreted by using the technique of analysis of variance (ANOVA), which provides mathematical rigor to establish whether the characterization of a particular variable affects the system response in terms of voltage sags or not. In Chapter 4, a methodology to predict the severity of voltage sags of an entire system through the sag logs of a reduced set of monitored busbars is proposed. For this, the Bayes conditional probability theorem is used, which calculates the most likely sag severity of the entire system from the information provided by the installed monitors. Also, in this chapter an important property of voltage sags is revealed, as is the correlation of the voltage sags events in several zones of a power system. In Chapter 5, two methods of optimal location of voltage sag monitors are developed. The first one is a methodological development of the observability criteria; it contributes to the realism of the sag pseudo-monitoring with which the optimal set of sag monitors is calculated and, therefore, to the reliability of the proposed method. As an alternative proposal, the correlation property of the sag events of a network is used to raise a method that establishes the sag severity of the entire system from a partial monitoring of the network. Finally, in Chapter 6, a brief description of the main contributions of the studies in this Thesis is detailed. Additionally, various themes to be developed in future works are described. III. RESULTS. Based on tests on the three networks presented, two IEEE test networks of 24 and 118 busbars (IEEE-24 and IEEE-118) and the electrical system of the Republic of Ecuador (EC-357), the following points present the most important observations: A. Estimation of voltage sags in the absence of measures: A stochastic estimation method of voltage sags, called PEHT, is implemented to represent with greater realism the long-term simulation of voltage sags events in a system. This first proposal of this thesis is considered a key step for the development of future methods of this work, as it emulates in a reliable manner the voltage sag long-term records in a generic network. Among the main innovations of this voltage sag estimation method are the following: - Consideration of the combined effect of five random input variables to simulate the events of voltage sags in long-term monitoring is included. The input variables modeled in the characterization of voltage sags on the PEHT are as follows: (i) fault coefficient, (ii) fault impedance, (iii) type of fault, (iv) location of the fault, and (v) fault duration. - Also included is the stochastic modeling of the input variables of fault impedance and duration in the characterization of the events of voltage sags. For the parameterization of these variables, a detailed study of the real behavior in power systems is developed. Also, the statistical function best suited to the random nature of each variable is defined. - Consideration of sag severity indicators used in standards as PEHT output variables, including such as indices as SARFI-X, SARFI-Curve, etc. B. Sensitivity analysis of voltage sags: A cause-effect study (sensitivity analysis) of the input variables of greatest divergence between reference parameterization related to the estimation of voltage sags in electrical networks is presented. Specifically, it delves into the study of the influence of the parameterization of the variables fault coefficient and fault impedance in the voltage sag estimation. Below is a summary of the most notable observations: - The accuracy of the input variable fault coefficient is shown as a non-influential parameter in the long-term estimation of the number of voltage sags (SARFI-90 and SARFI-70). That is, it does not require a high accuracy of the fault rate data of system elements for a proper voltage sag estimation. - The parameterization of the variable fault impedance is shown to be a very sensitive factor in the estimation of the voltage sag severity. For example, by increasing the average value of this random variable, the reported sag severity in the network significantly decreases. Moreover, in assessing the standard deviation of the fault impedance parameter, a direct relationship of this parameter with the voltage sag severity of the network is observed. That is, by increasing the fault impedance standard deviation, an increase of the average and the interannual variation of the SARFI-90 and SARFI-70 events is evidenced. - Based on the sensitivity analysis developed in the variable fault impedance, the omission of this variable in the voltage sag estimation would significantly call into question the reliability of the responses obtained. C. Voltage sag estimation from the information of a network partially monitored: A method that uses the voltage sag records of a partially monitored network for the sag estimation of all the power system is developed. From the case studies performed, it is observed that the method implemented (PEHT+MP) has the following characteristics: - The methodology proposed in the PEHT+MP combines the classical short-circuit theory with several statistical techniques to estimate, from data the of the installed sag meters, the sag measurements of unmonitored busbars of a generic power network. - The estimation process of voltage sags of the unmonitored zone of the network is based on the application of the conditional probability theorem of Bayes. That is, based on the observed data (monitored busbars records), the PEHT+MP calculates probabilistically the sag severity at unmonitored system busbars. Among the key parts of the proposed procedure are the following: (i) the creation of a realistic data base of voltage sags through of the sag estimation program (PEHT); and, (ii) the maximum likelihood criterion used to estimate the sag indices of system busbars without monitoring. - The voltage sag measurement estimations of PEHT+MP are potentiated by the correlation property of the sag events in power systems. This inherent characteristic of networks significantly limits the response of strongly correlated system zones to a possible voltage sag. As the PEHT+MP is based on probabilistic principles, a reduction of the range of possible sag measurements is reflected in a better sag estimation of the unmonitored area of the power system. - From the data of a set of monitors representing a relatively small portion of the system, to obtain accurate estimations (null error) of the sag severity zones without monitoring is feasible in the three networks studied. - The PEHT+MP can be applied to several types of sag indices, such as: SARFI-X, SARFI-Curve, SEI, etc. D. Optimal location of voltage sag monitors in power systems: Two methods for strategically locating the sag monitoring system are implemented for a generic network. The first proposal is a methodological development of the optimal location of sag monitors based on the observability criterion (LOM + OBS); the second proposal is a method that determines the sag monitor location according to the correlation area criterion (LOM+COR). Each proposed method of optimal location of sag monitors has a specific goal. In the case of LOM+OBS, the purpose of the method is to determine the optimal set of sag monitors to record all faults that originate voltage sags in the network. On the other hand, the LOM+COR method attempts to define the optimal location of sag monitors to estimate the sag indices in all the assessed network with the PEHT+MP application. From the development of the case studies of these methods of optimal location of sag monitors in the three networks raised, the most relevant observations are described below: - As the generation of voltage sag pseudo-measurements of the optimal location methods (LOM+OBS and LOM+COR) are obtained by applying the algorithm PEHT, the formulation of the optimization criterion is performed based on a realistic sag pseudo-monitoring, which considers the random nature of voltage sags through the five stochastic variables modeled in PEHT. This feature of the database of sag pseudo-measurements of the LOM+OBS and LOM+COR methods provides a greater reliability of the optimal set of monitors calculated when compared to similar methods in the bibliography. - The optimal set of sag monitors is determined by the network operator need. That is, if the goal is to record all faults that originate from voltage sags in the system, the observability criterion is used to determine the optimal location of sag monitors (LOM+OBS). Moreover, if the objective is to define a monitoring system that allows establishing the sag severity of the system from taken from information based on a limited set of sag monitors, the correlation area criterion would be appropriate (LOM+COR). Specifically, in the case of the LOM+OBS method (based on the observability criterion), the following properties were observed in the case studies: - By increasing the size of the network, there was observed a reduction in the percentage of monitored system busbars required. For example, to monitor all the faults which cause sags in the IEEE-24 network, then 100% of the system busbars are required for monitoring. In the case of the IEEE-118 and EC-357 networks, the method LOM+OBS determines that with monitoring 89.5 % and 65.3 % of the system, respectively, the observability criterion of the method would be fulfilled. - The LOM+OBS method calculates the probability of using the optimal set of sag monitors in the long term, establishing a relevance criterion of each sag monitor considered as optimal in the network. With this, the level of accuracy or observability (100%, 95%, etc.) can be determined, with which the faults that caused sags in the studied network are detected. That is, when the accuracy level for detecting faults that cause sags in the system is increased, a larger number of sag monitors is expected when calculating the optimal set of monitors. - The LOM + OBS method is demonstrated to be a technique applicable to any type of electrical system (radial or mesh), ensuring the detection of faults that cause voltage sags in a system according to the observability level raised. In the case of the optimal localization of sag monitors based on the criterion of correlation area (LOM+COR), several tests showed the following conclusions: - The procedure of LOM+COR method combines the implemented algorithms of voltage sag estimation (PEHT and PEHT+MP) with linear optimization techniques to define the optimal location of the sag monitors in a network. That is, the PEHT is used to generate the voltage sag pseudo-records, and, from the proposed optimization criterion (correlation area), the LOM+COR formulates and analytically calculates the optimal set of sag monitors of the network in the long term. From the information recorded by the optimal set of sag monitors, an accurate prediction of the voltage sag severity at all the busbars of the system is guaranteed with the PEHT+MP. - The LOM + COR method is shown to be a versatile optimization procedure, which reduces the size of the sag monitoring system both at radial as meshed grids. Due to its characteristics, this optimal location method allows emulation of complete system sag monitoring through the records of a small optimal set of sag monitors. Therefore, this new optimization method would be applicable to network operators that looks to reduce the installation and operation costs of the voltage sag monitoring system.

El centro comercial : una teoría tipológica : claves para el reconocimiento de una arquitectura ignorada

Existe en el panorama edificado un patrimonio construido que se reconoce como Centro Comercial. Un conjunto entendido, en sentido genérico, como familia arquitectónica que tiene características propias y específicas que la identifican. El objeto de la presente tesis doctoral consiste en argumentar que este conjunto constituye un nuevo tipo en el panorama de las tipologías arquitectónicas. Un tipo con entidad propia, que se conecta a una forma diferente de entender la idea de modelo. Un concepto que va más allá de la consideración tradicional del término. Modelo virtual. Este tipo, que surge de una estructura teórica que hemos denominado teoría tipológica, se constituye en una herramienta más para el estudio y el desarrollo proyectual de los espacios arquitectónicos, tanto del propio Centro Comercial como del conjunto de la disciplina arquitectónica, como referencia legítima. El presente trabajo de tesis se inicia con un bloque introductorio denominado Método. Definimos en él una metodología que hemos llamado emocional. Trata de la oportunidad de la tesis. Del porqué de un título que recoge la palabra ignorada. Del interés que suscita el asunto en el contexto del momento presente. Oportunidad e interés en base a una vida profesional dedicada al mundo del Centro Comercial y a la importancia del patrimonio elegido como objeto de estudio. También ha sido un aliciente detectar como las planificaciones del territorio y de los ámbitos de las relaciones colectivas no han sido capaces de integrar un resultado satisfactorio. Quizás por no considerar la complejidad de sus muchas facetas. En consecuencia, el texto busca la esencia del Centro Comercial como soporte para la crítica de su impacto en los nuevos escenarios de relación que la sociedad y el entorno físico imponen. Ámbitos donde los mecanismos históricos del asociacionismo tradicional han dado paso a otros, como el Centro Comercial, de exaltación del individualismo, pero demandados por una sociedad que se identifica con ellos. Espacios que, con Galbraith, existen por de la perversidad intrínseca del binomio consumo-producción que inducen la perplejidad. Ésta pasa a formar parte de la esencia del nuevo espacio comercial, como quedó de manifiesto en el Congreso de Minnesota de 1997, sobre el Centro Comercial. Una sociedad que ha girado hacia el logro material en términos de culto, ocasionando creciente valor significante del consumo. Razón última de la humanidad al decir de Rem Koolhaas. Culto que desemboca en la urgencia de alcanzar niveles de estatus y de identificación con el grupo. Dos parámetros que marcan la relación con el otro. Relación de comparación que excita la necesidad de posesión de objetos que llevaban a recrear en el consumidor la ilusión de ser especiales, de no pasar desapercibidos. El producto de consumo, el objeto, se eleva a la consideración de valor social. En el Centro Comercial se venden valores. Marketing de valores. El deseo del individuo, no la necesidad, queda involucrado en el proceso. La oportunidad y el interés de este estudio surgen además para aclarar el significado de un espacio que sirve al consumidor y a su entorno. Un significado que alcanza sentido, entre otros, por la aparición de un nuevo contexto tras la Segunda Guerra Mundial. Suburbanización, automóvil, nivel de vida, un nuevo papel de la mujer. La Era del Consumo. Una era que genera la paradoja de un individuo con autodeterminación y autosuficiencia crecientes, en un mundo cada vez más condicionado y controlado por dinámicas de ofertas mediatizadas e ilimitadas. La arquitectura en este contexto ha de juzgarse por su relación con un hombre contemporáneo que camina hacia una progresiva excepcionalidad. Cerramos la presentación justificando el término ignorada que aparece en el Título de la Tesis. Subrayamos la escasa existencia de estudios estructurados que relacionen Centro Comercial y arquitectura. Realidad que se constata partiendo del libro de Pevsner, Historia de las Tipologías Arquitectónicas, de 1976. Analizamos también la aceptación que el Centro Comercial, valorado en algunos ámbitos como arquitectura populista. Primer Capítulo, los antecedentes. Se propone un recorrido histórico por la arquitectura comercial de todos los tiempos. El Documento busca concretar las características de la arquitectura comercial a lo largo de la historia para determinar relaciones entre ella y el Centro Comercial. Estas correspondencias van a permitir contestar la pregunta retórica que nos hacemos al inicio del Capítulo: ¿Es la arquitectura del Centro Comercial una arquitectura subsidiaria, o tiene personalidad propia independiente de la del mundo comercial? Con Zevi40, queremos dejar constancia que la relación arquitectura-historia es imprescindible en la tarea proyectual. Un análisis novedoso solo es posible desde la búsqueda de unas raíces auténticas. Así mismo, con Guy de Maupassant, estamos convencidos que “La arquitectura, a través de los siglos, ha tenido el privilegio de dar un símbolo a cada una de las épocas, de resumir con un pequeñísimo número de monumentos típicos, el modo de pensar, de soñar de una raza y de una civilización”. Este recorrido se inicia interpretando la arquitectura comercial minoica. Llegaremos, paso a paso, hasta el siglo XX, los grandes itinerarios comerciales y el Centro Comercial. Se descubren una serie de invariantes que permiten comparar y extraer conclusiones. Resulta novedoso constatar que el Centro Comercial nace para dar respuesta al hombre contemporáneo en su afán consumista. También lo es la rápida implantación y evolución del Centro Comercial en un corto periodo de sesenta años frente al ritmo sosegado de otras soluciones comerciales. Novedad es ver como el comercio y sus arquitecturas nacen abiertos, bajo tenderetes y el Centro Comercial se presenta cerrado. Así mismo, las referencias sacras constituyen un elemento de novedad para la reflexión, en un contexto materialista. Y tantas otras. En Minos, la óptica comercial ofrece otra visión de su legendaria cultura. ¿Palacio o plataforma logística?, gestión centralizada del intercambio, ¿vida pública y vida privada? Así, hasta llegar al siglo XIX. Sus las galerías y sus pasajes acristalados concebidos en primera instancia como medida de recomposición urbana. Espacio entendido desde lo público-privado, desde lo interior-exterior, desde el dentro-afuera, desde lo cerrado-abierto. Con los nuevos mercados de abastos, representan una revolución en el ámbito de la funcionalidad, de la máquina, de la gestión moderna y de las relaciones del ciudadano con la ciudad apoyado en base al intercambio de bienes de consumo. El Centro Comercial es heredero de esta transformación. El Gran Almacén, por otra parte, es el reflejo de otra gran revolución. La que va ligada a la producción y comercialización en masa, las comunicaciones, el precio fijo y el aumento del nivel de vida. El Centro Comercial reinterpreta estas situaciones insertándolas en un nuevo modelo de gestión. En el siglo XX, maestro en técnicas de venta, aparece el hipermercado. El Híper, con su carga de pedagogía, se incorpora al esquema orgánico del Centro Comercial. La tienda en si misma constituye la pieza base de dicho puzle orgánico. Es en esta época cuando la tienda empieza su despegue autónomo como arquitectura, aportando su experiencia. Tras ello, llegamos a las grandes rutas comerciales, que proponemos como metáfora del shopping. Cerramos el capítulo concluyendo con Eugenio Ferrer que “si establecemos una relación entre el espacio y el capitalismo, entonces podemos inferir que los espacios del consumo de masas (ECM) son configuraciones nuevas respecto al pasado (...), pero el sistema que lo introduce no lo es del todo”. Segundo Capítulo. Búsqueda de claves que permitan el reconocimiento del Centro Comercial. Llegados a este punto y con la perspectiva del tiempo cabe preguntarnos, ¿qué entendemos pues por Centro Comercial? ¿Cómo lo percibimos? Abordamos ahora el problema de la percepción del Centro Comercial y su significado. Además de constituirse en símbolo, referencia siempre presente, la eficacia del Shopping es una de las principales causas de su poder de atracción. El Centro Comercial resulta de la síntesis de la revolución del consumo y de la revolución de la gestión. Espacio eficaz del entretenimiento como destino. El usuario resuelve su vida cotidiana dentro de un hábitat que considera propio y que se entiende como el lugar hiperbólico de la transacción comercial. Espacio de la abundancia para el disfrute. Una arquitectura involucrada en esta eficacia. Su sentido del lugar no es otro que el Shopping, que se desenvuelve de forma análoga en todas partes. El hogar del consumidor. Las nuevas catedrales. Las catedrales del consumo. Destino místico. Lugar de peregrinación para el consumidor fervoroso. Espacio sagrado que integra al usuario en la cultura dominante. Cultura del consumo. Templos, donde el tiempo ha perdido su sentido. Paraíso. Un espacio donde la altura, la luz natural, la dimensión general refuerzan el carácter sacro de un espacio para una nueva religión laica. Un espacio seguro, protegido que nos acerca a ideas como la de útero materno, con su carga de calidez y de significación erótica aplicado al encuentro compra-comprador y, ligado a ello, la literatura especializada habla del Centro Comercial como nave espacial hiperesterilizada o de agujero negro que absorbe la energía cultural. Más allá, la simulación, donde se percibe un simulacro de ciudad. Simulacro coherente con todo lo que el Shopping desencadena a su alrededor. El lugar de los sueños, de la fantasía. Aquí los productos se han metamorfoseado en fetiches, en significados. Televisión tridimensional, donde el usuario actúa guiado por una pulsión similar al zapping. Espacio lúdico de la fascinación por comprar o de imaginar que se compra. Espacio de simulaciones que llevan a la ensoñación. Un nuevo lugar que sustituye al espacio cotidiano, con el señuelo de la protección, en un contexto imaginariamente público. Espacio de la hiperrealidad donde no se distingue la realidad de la fantasía, donde tras episodios de confusión y desconcierto, se borran las fronteras con lo imaginario. Espacio mágico, escenario del gran espectáculo del consumo, controlado milimétricamente, al modo de la visita a un gran monumento, que ha de sobrevivir a los tiempos para dar testimonio de nuestro momento. Un icono, un símbolo que transmite un mensaje, que solo el consumidor es capaz de interpretar. Una agitada mezcla, sin precedentes, de percepciones que hablan de perplejidad y asombro ante el fenómeno del Centro Comercial, su espacio y las reacciones del hombre contemporáneo. ¿Cuáles serían las claves que nos permitirían reconocer la calidad esencial de un Centro Comercial, en esta concurrencia de perplejidades? Primero, la función de servicio. Un espacio donde ocurren muchas más cosas que lo obvio, que la compra. Un edificio que se involucra con el entorno de la mano de lo inesperado, la sorpresa y las expectativas. Esta vocación de servicio conecta Centro Comercial y naturaleza arquitectónica. Función que sugiere percepciones ligadas a la experiencia de compra. Organismo que vive y late al unísono con su visitante, colocándose al servicio de sus necesidades, de su afán de consumo, del que vive. Segundo, la comunidad servida. El Centro comercial sirve a una sociedad concreta. La sociedad consumista. Una nueva sociedad que se identifica con el edificio desarrollando un sentido de comunidad al nivel de sus deseos. Esta comunidad que se configura a su alrededor, constituye el activo más poderoso para el éxito de su realidad cotidiana y de su futuro. Tercero, un compromiso de carácter holístico. La economía de la experiencia aplicada al afán consumista de una sociedad identificada con su Centro, da lugar a una experiencia holística planificada. Diseño emocional. Colaboración para el éxito de un conjunto de establecimientos comerciales que participan en la aventura espacio-comercial del Centro Comercial. Ellos son los inductores primarios del consumo. Pero esta colaboración tiene su culminación en la amplificación del mensaje, como un inmenso altavoz, que proviene de la unidad configurada por todos ellos. El reflejo de esta amplificación de mensajes, desde la poderosa unidad constituida, es el aumento de la rentabilidad, fin último de la operación. Cuarto, la forma a través de una identificación de carácter gestáltico. Desde la lectura gestáltica que hacemos de la unidad holística, se advierte una poderosa capacidad de comunicación del sistema con su contexto. Centro y entorno se tornan entonces cómplices que complementan sus realidades. El Centro Comercial, arquitectura estructurada como sistema se percibe –ha de percibirse- como forma unitaria que procede de una mirada de raíz gestáltica que continuamente la recompone desde una óptica espacial y física, ligada a la experiencia individual. Esta unidad formal, más allá de la forma real, se constituye en esencia de de su arquitectura. Quinto, el Centro Comercial como sistema. Un sistema soportado por la Teoría General de Sistemas. La consideración del Centro Comercial como sistema es consecuencia de su estructura holística. El todo no se comporta como la suma de las partes y estas no lo hacen como lo harían en solitario. De aquí surge la necesidad de diálogo permanente entre la comercialización –proceso de incorporación de partes- y su traducción al mundo del diseño –proceso de articular arquitectónicamente las partes. Como sistema así configurado, el Centro Comercial se inserta en el paradigma contemporáneo, lo que genera realidades duales que no son excluyentes y reacciones de perplejidad e incertidumbre que el sistema corrige con su capacidad de autorregulación. Aparece también el espectador cuántico, el visitante, el consumidor, que interactúa con el sistema. Desde las herramientas que nos aporta la idea de sistema complejo, afrontamos el Mix Comercial -en definitiva la eficaz localización de las piezas en orden a sus relaciones y al organismo resultante- y su incidencia en la arquitectura que estamos concibiendo. Una arquitectura impredecible por lo mutable, que se erige en reto de la operación y del diseñador. Diseño que, de la mano del concepto de sistema se convierte en herramienta a mayor gloria de la operación global. El debate del estilismo no será más que el resultado del análisis en busca del éxito de esta operación. Sexto, una arquitectura de la negociación. Negociación como mecanismo proyectual y como resultado. La solución de proyecto nunca resulta evidente en el Centro Comercial como consecuencia de lo imprevisible del propio proceso de configuración. Su concreción solo puede ser fruto del compromiso de todos los agentes por conseguir el objetivo de la operación. Esto se consigue desde el equilibrio de intereses. Comerciales y de diseño. Un compromiso con la negociación y una negociación íntimamente ligada a la coordinación. Séptimo, el espacio y el tiempo. El debate espacio-tiempo condiciona y estructura la percepción del Centro Comercial. Introducimos conceptos como cronotopo –el instante y el lugar donde ocurre algo- y paradoja –incoherencia de la relación causa efecto- que sitúan el vínculo entre el tiempo y el espacio del Centro Comercial en un contexto de Shopping. En el discurrir paralelo del tiempo histórico –el tiempo de fuera- y del tiempo interior, el de dentro del Centro Comercial –tiempo presente o intemporalidad-, se produce el triunfo social del Centro Comercial que se traduce en haber sabido resolver en el espacio y en el tiempo las paradojas postmodernas del hombre contemporáneo. Octavo, de lo global. Globalidad que no es ajena a lo local. Una arquitectura que insertada en la dinámica de una economía de ámbito mundial, refleja las contradicciones que ella impone, fundamentalmente en los procesos de inclusión y exclusión, afectando de manera decisiva al debate de lo local, que el Centro Comercial debe incorporar como herramienta ineludible de reconocimiento. Terminamos el capítulo segundo manifestando como estas ocho claves, asumidas en su conjunto, confirman que el Centro Comercial puede aparecer como un todo conceptual cohesionado, pasando a formar parte de una familia arquitectónica coherente, cuya estructura funcional somos capaces de establecer. El Capítulo Tercero presenta con detalle la figura del arquitecto Víctor Gruen, creador reconocido del moderno Centro Comercial. Presentamos su trayectoria profesional observando como las diferentes claves analizadas en capítulos anteriores van apareciendo de manera natural a lo largo de ella "Victor Gruen may well have been the most influential architect of the twentieth century." Malcolm Gladwell. The Terrazo Jungle. Fifty Years Ago, The Mall Was Born. America Never Would Be The Same. 2004. In The New Yorker. Hombre complejo, conflictivo. Las paradojas a lo largo de su carrera fueron notables. Sin embargo siempre apareció como un hombre recto. Garret Eckbo, reconocido paisajista y colaborador de Gruen en el Centro Comercial peatonal del Centro urbano de Fresno, California, se asombraba de que alguien como Gruen hubiese sido capaz de combinar cortesía y humanidad en la carrera de ratas (sic) en la que se convirtió el universo de la comercialización americana y mantener la integridad542. Philip Johnson, en 1962, ponderando las muchas habilidades de Gruen manifestó que no estaba seguro si alguno de ellos, arquitectos artistas, hubiera sido capaz de hacer lo que Gruen hizo. A más, sobre Gruen, manifestó lo siguiente: "... El va más allá de la creación de un bello edificio. En jugar con la gente y sugerir lo que tienen que hacer, es un maestro. Y obtiene buenos resultados como hace la escultura. El suyo es un arte cívico, un sentido cívico.... Él es capaz de sentarse y poner cosas juntas. No es pomposo ni vano. Yo no me reuniría con él para hablar del diseño (de edificios). Víctor siente que cuando se habla de diseño se está ignorando todo el contexto... Su arquitectura es poderosamente limpia, no vuela la fantasía. Pero cuando te haces con su complejidad, ves que has descubierto algo más allá del diseño.... No puedes decir que haya alguien como él. La arquitectura tiene la suerte de tenerle como arquitecto..." Philip Johnson. Article in Fortune Review. 1962. El Documento de tesis cierra la visión de Gruen realizando un recorrido por los diferentes capítulos de su libro esencial, Shopping Towns Usa: The Planning of Shopping Centers. Solo su índice resulta un monumento al proceso de gestación del Centro Comercial. El libro, aquí simplemente mostrado en su estructura básica como un silencioso testigo, es la referencia canónica los Centros Comerciales contemporáneos, desde su aparición. . El Cuarto Capítulo del Documento de tesis es una recapitulación del trabajo anterior, en el que se sintetizan los conceptos de función y estilo relacionados con el Centro Comercial, se define en qué consiste cada uno de ellos y como, a partir de ahí, podemos afirmar que nos encontramos ante un tipo arquitectónico nuevo en el panorama de la disciplina arquitectónica. Terminamos el Capítulo integrando el Centro Comercial con un cuerpo teórico de referencias que se remiten a un tipo arquitectónico concreto y particular, acogiendo su singularidad como fenómeno arquitectónico autónomo. Como Conclusión de la tesis, resultado de todo lo anterior es decir, como consecuencia de la integración de un torrente de percepciones e intuiciones en un cuerpo teórico de referencias, deducidas de la existencia de unas claves que estructuran y penetran la esencia del singular modelo estudiado, haciéndolo detectable y seductor, resultan las características de un tipo arquitectónico con entidad propia que ordena, orienta y supedita la realidad y la existencia de esta nueva arquitectura. Una arquitectura nunca antes definida como tal, en el panorama tipológico de la disciplina. Teoría tipológica para una nueva arquitectura, que hemos ido proponiendo a lo largo del trabajo y que es coherente con los diferentes parámetros que se han analizado. Un conjunto edificado que, desde el estudio de sus claves esenciales y de sus invariantes perceptibles, aparece ahora más cercano, más familiar. Tanto que es posible destilar desde este conocimiento cercano e íntimo, una síntesis útil como referencia proyectual y como referencia para las grandes cuestiones que preocupan al discurrir del debate arquitectónico y sus ideas. El debate de la disciplina. El objeto de esta tesis, que consistía en establecer que el conjunto edificado que conocemos como Centro Comercial se constituye en un nuevo tipo en el panorama de las tipologías arquitectónicas, entendido el Centro Comercial en sentido genérico como familia arquitectónica con características propias y específicas que la hacen autónoma y reconocible, queda a nuestro juicio argumentado y justificado. ABSTRACT Within the frame of the built heritage there is a construction that is recognized as Shopping Center. An ensemble understood as an architectural family with its own specific recognizable characteristics. This thesis aims to explain that this building complex constitutes a new type in the panorama of architectural typology. This typology, with its singular identity, is connected to a way of understanding the idea of the model beyond an orthodox conception of the term understood as virtual model. This typology comes from a theoretical structure that we called typological theory, and it serves as yet another tool to reference the study and development design of the architectural spaces. In this first section, the Method, we emotionally explore the opportunities of this thesis. Why this typology has been ignored and the interest this work has in the present moment. An opportunity and an interest explained from an experience of a life dedicated to the world of Shopping Centers. The text then introduces the need for a rigorous knowledge of the Shopping Center’s essence in order to understand its impact in the frame of a new society and a new physical environment. A frame time where the historical mechanisms of association of civic community have given way to other gathering spaces like the Shopping Center, which encourages individualism, but is demanded by a society that relates to them. Spaces that, according to Galbraith, are a result of the intrinsic perversity of the unstoppable movement of the wheel of consumption-production. A society that has turned to worship of material achievement. Worship that provokes the appearance of an increasing value of consumption, according to Koolhaas, the only goal of humanity. Worship that ends in the need to reach certain status levels in the plane of a permanent comparison where the need of possession excites the consumer and gives them the illusion of being special. The product of consumption rises up to consideration of social values, entering a dynamic of marketing values, not only objects, but the desire of the individual remains. The study appears also to clarify the meaning of a space that serves the consumer and its context. A meaning that makes sense with the appearance of the suburbanization, the massive utilization of the car, the increase of living standards and the new role of women in the society after the Second World War, giving rise to the Age of Consumption. A world now determined and controlled by media and unlimited offers, where it’s necessary to place them in the context of the ordinary. An architecture that has to be judged precisely for its relation with this specific contemporary man. This section ends justifying the term ignored that appears in the Title of the Thesis, considering it in relation with the lack of studies structured about the Shopping Center and its architecture, drawing from Pevsner's work, A history of building types, 1976. Finally, the Shopping Center is analyzed with the most critical of thoughts, which considers it as populist architecture. The First Chapter, Precedents, proposes an historical tour of the commercial architecture throughout history. The Document looks to place on record the characteristics of the commercial architecture to set the connection between them and the Mall itself. These correspondences are going to allow us to answer the rhetorical question: is it the architecture of the Shopping Center a subsidiary architecture, or does it have its own personality independent from that of the commercial world? The reason of this historical search, citing Bruno Zevi, is that it is indispensable to establish the relationship between architecture and history, understating that an analysis is only possible when researching for their roots. Moreover, according to Guy de Maupassant, we are sure that architecture has had the privilege, across the centuries, of symbolizing as it were each age(…), through the harmony of lines and the charm of ornamentation all the grace and grandeur of an epoch. This historical reading, inseparable from a consistent design action, begins interpreting the commercial architecture of the Minoan to the 20th Century. Though this analysis of the big commercial itineraries and the study of the Shopping Center itself. A reading where we have found a series of constants that make it possible to draw conclusions from this comparison. The Mall appears to give response to the needs of a consumerist society. Comparing to the calm pace of the evolution of other commercial solutions, it is relevant its fast implantation and evolution in a short period of sixty years. Though via different solutions, the commercial spaces are considered taking into account the public-private relation, the interior-exterior, the inside-out, the closed-opened. Through that, the 19th century galleries and the food markets represent a revolution in functionality, in the machine, the modern management and the relations of the citizen within the city. All of this, the Mall inheritor feels. Likewise, the Department Store is the reflection of another great revolution. Production and commercialization en-mass, communications, the fixed price and increase of the living standard. The Mall reinterprets these situations inserting them in a new model of management. Already in the 20th century Mall and mass technologies of sale, the hypermarket is enthusiastically incorporated into the configuration of this organic scheme, constituting the base of one of the models, the French, that will be highly developed in the European continent. The shop itself constitutes, on the other hand, the key piece that completes the puzzle of the Mall and is in this epoch when it starts taking off as architecture, has an autonomous character. After all this, finally, we come to the big commercial routes, which we propose as metaphor of the shopping. Citing Eugenio Ferrer we can conclude that “If we establish a relation between the space and the capitalism, then we can infer that the spaces of the consumption of masses (ECM) are new configurations with regard to the past (...), but the system that introduces it it is not completely” Now we arrive at this point and with the perspective of time it is necessary to ask us, what do we understand about the Shopping Center? How do we perceive it? The second Chapter approaches the problem of the perception of the Mall and from this it is possible to detect and to identify key drivers that orientate the architectural comprehension of the space. The efficiency of the Shopping Center is its main power of attraction. A world that has ensued from the synthesis of the revolution of consumption and management. An effective cavern-like place of entertainment where the user, the consumer, the postmodern man solves his daily life inside a considered habitat. The hyperbolic place of commercial transaction. An abundance of space, that makes us perceive it as destination of entertainment. An architecture has evolved this efficiency, where the sense of place is at one with the sense of the Shopping. The home of the consumer. The new cathedrals. The cathedral of consumption. The place of peregrination for the fervent consumer. A sacred space that integrates the user in the dominant culture. A temple, where time itself has stopped existing. In this paroxysm, an expression of the Garden of Eden or Paradise itself. A space where the height, the natural daylight and the spatial dimension reinforce the sacred character of a new lay religion. Another common perception is that of a protected area, which leads to metaphors and considerations that suggest the idea of maternal womb, with its weight of erotic meaning, referring to the encounter of the shopper making a purchase. The literature also tells us about its perception as a sterile space capsule, a black hole that absorbs all cultural energy. Likewise, a world simulation where a mock city is perceived at first instance. Consistent with all that shopping triggers inside. A city, a space conceived as a place of dreams, fantasy, where the products have been metamorphosed into fetishes. Entertaining a television, three-dimensional television, where the user acts guided by a drive similar to zapping. A play area where the latest fascination is in the act of buying. Space simulations that unite and transcend creating atmospheres that lead to reverie. A new space replacing the daily space with the lure of safe space in a public context. A hyper-reality space with reality and fantasy, where borders are erased with imaginary episodes of confusion and bewilderment, without distinction. The charm and fascination of a space that reads like magic. The magic of a space which is defined as stage extravaganza, the large theatre, the consumer surveys in the fine control mode in which you visit a national monument. The shopping center has to survive the times to be a testimony of our time. An icon, a symbol that conveys a message, the message reads ‘consumer’. In short, a Shopping Center is a mix of unprecedented insights that speak of a widespread phenomenon of bewilderment. Its space and the reactions of contemporary man unfold in it like a fish in water. What are the key aspects which allow us to recognize the essential quality of a shopping center in this concurrence of perplexities? First, we want to record a service function of space much deeper than the immediately obvious, i.e. a purchase occurs. A building that appears to be involved with the environment and its people from the hand of the unexpected circumstances; surprise and attention. And that, in turn, also involves the visitor beyond the purchase. This dedication to service closely links the mall with its architectural nature. It is not the function of a lifeless machine. It is a feature that suggests unsuspected perceptions linked to the purchase, which speaks of an organism that lives and breathes in unison with the visitor. Second, in addition to the vocation of service-oriented desire for consumption, the Mall environment serves a particular society - The consumer society. A new society which relates to building a sense of community developed to the level of their desires. This community also constitutes the most powerful asset to the success of the daily life of the Shopping Center. Third, we emphasize that the so called economy of the experience is combined with the consumer zeal of a company that is identified by the Shopping Center. It connects to form a holistic and planned experience. This experience takes shape in the entity that ensues from the premeditated association and synergy, in the sense of a collaboration for success. A set of concrete commercial and independent establishments, take part in the spatial and commercial adventure that is the Mall and they are the instigators of the consumption. This holistic behavior finds culmination in the amplification of a claim that becomes unitary, like an immense force that leads to an increased profitability to all the levels. Consummation is a reference of one human being overturned in an architecture assimilated into a legitimate, emotional design with stability. A holistic quality is born of the essence of the building - and by virtue of the Conditions of Alexander, Christopher Alexander, determines the system condition of the Shopping Center. Fourth, we propose to establish what character the Mall will form when joined with the concept of its typology. This is going to allow the architectural work to be formed. As a result of the holistic structure that we see, the Mall is perceived as a system whose parts have their own function, justifying their existence in the ecosystem. Across a gestalt there is a powerful capacity of communication between the system and its context. We visualize on the one that stands out our building, turning both, Center and environment, in accomplices of a few special relations who complement each other in his realities. This relationship within a complex and diverse environment gives the Mall a range of unique spatial perceptions, the result of disparate experiences, which because of its root origin of gestalt, are integrated into a unified and coordinated manner fully intelligible and organized. This is the final formal essence of the Shopping Center. We can conclude here that the Mall as architecture is a structured system and should be perceived as a unit both from a physical and spatial perspective as this is the essence of its architecture. Fifth, the Mall as a system. A system which is being supported by a broad theoretical corpus, the General Systems Theory, which offers sufficient methodology to descend into consideration and give an enlightened conclusion on the overall understanding of the Mall. Consideration of the Mall as a system is a result of its holistic structure. The whole does not behave like any of the parties and they do not behave the way they used to before belonging to the whole, because they inhibit many of their qualities to their advantage. It arises the need for an ongoing dialogue between marketing processes and its translation into the physical world, the design. The system generates multiple perceptions to be integrated into a body which is to be understood as unitary. As a system, the Mall is inserted into the contemporary paradigm, creating dual realities that are not exclusive and are reactions of uncertainty that the system be properly designed at all levels, faced with their ability to self-regulate. Likewise, considering the visitor, the customer, like the quantum spectator who interacts with the system permanently. Moreover, a complex system confronts us with the Commercial mix, the effective location of parts in order to relate to the body and its importance in the architecture we are conceiving. Unpredictable architecture, which stands as the challenge of the operation and the designer. Design that becomes the tool of the system to create success for the overall operation. The discussion of the styling is merely the result of analysis that also seeks the success of the system, i.e. the styling should send the right message for the environment to ensure its survival. Sixth, the idea of negotiation as an architecture project, a mechanism inherent to the status of the proposed system. The project solution is never evident at the Shopping Center because of the unpredictability of the process itself. It can only be the fruit of the commitment of all stakeholders to achieve the objective of the operation. This is achieved from the balance of interests, of commercial and design. A commitment to negotiation and a negotiation linked to coordination. The pursuit of stability is key, as instability is always present and constantly requires strategies to build the object you are configuring. Seventh, proposes space-time itself as a circumstance that determines and structures the perception of the Mall in a singular way. We introduce concepts as chronotope and paradox to help us place the relationship between time and space within the Mall in the context of shopping. A consequence of the parallel flow of historical time - the time outside - and the time inside the Mall, the big shopping center formula is precisely that of having the feeling of timelessness in the space. The social triumph of the mall is the ability to resolve in space and in time all postmodern paradoxes and, beyond that, of contemporary man, condensing into a small space and time an enormous amount of cultural symbols, often contradictory, but they attract the practice of consumerism. Eighth, global level. Globalization which doesn’t ignore the local level. Architecture that is inserted into the dynamics of a global economy, reflects the contradictions that it imposes, mainly in the processes of inclusion and exclusion. Inclusion and exclusion affect the debate of the local level, which the Mall must incorporate as an unavoidable tool of recognition. The eight fundamental principles, when applied as a whole, confirm that the built heritage, which corresponds to the general Mall idea, can be presented as a cohesive conceptual whole. This becomes part of a coherent architectural family, whose functional structures are able to be established. The Third chapter presents in a detailed way the figure of the architect Victor Gruen, recognized as the creator of the modern Mall. Studying his professional experience, it is shown how the different keys analyzed in previous chapters are appearing in a natural way. "Victor Gruen may well have been the most influential architect of the twentieth century." Malcolm Gladwell. The Terrazo Jungle. Fifty Years Ago, The Mall Was Born. America Never Would Be The Same. 2004. In The New Yorker. He was a complex, troubled man and the paradoxes along his career were notable. Nevertheless, always he appeared as a straight man. Garret Eckbo, the recognized landscape painter and collaborator of Gruen was astonished how Gruen had been capable of combining comity and humanity in this career of rates, into that the American commercialization turned, Johnson, in 1962, weighting many Gruen's skills demonstrated that he was not sure if anyone of them, architects artists, had been capable of doing what Gruen did. He goes beyond just the creation of a beautiful building. In playing on people and suggesting what they ought to do, he is a master. (…) his architecture is clean - hardly architecture, no flights of fancy. But when you get hold of its complexity, you've got something beyond the design... You can't say there's someone like him. Architecture is lucky to have him as an architect." Philip Johnson. Article in Fortune Review. 1962. The Document of the thesis closes with Gruen's vision of realizing a tour through the different chapters of his essential book, Shopping towns USA: The Planning of Shopping Centers. It’s mere index turns out to be a monument to the process of the gestation of the Mall. The book, simply acted in its basic structure as a silent witness, as the canonical reference for the contemporary Malls. The Fourth Chapter of the Document of the thesis is a recapitulation of the previous work, which synthesizes the concepts of function and style related to the Shopping Center, and clearly defines how they are defined so we can conclude that we have found an architectural new type in the panorama of the architectural discipline. Therefore, the Conclusion of the thesis integrates this development in a theoretical body of references that relate to an architectural specific and particular type, which receives the singularity of the Shopping Center as an architectural independent phenomenon as it has tried to demonstrate from the beginning of the work. To conclude, as a result of the integrative process and the development of the theoretical body of references, the essential characteristics of the order and concept of the architectural typology form the existence of a new architecture; architecture never before defined as such, in the theoretical typology of the discipline. A theoretical typology for a new architecture is proposed throughout the discussed research and forms a conclusion of the different parameters that have been analysed. As a building complex, from the study of the essential characteristics and of the perceptible constants, the typology is more clearly defined and thus, becomes a useful tool and precedent for the consideration of the discipline. The thesis then justifies how the building complex known as Shopping Center constitutes a new type of architectural typology.

Aprendizaje integrado en arquitectura con modelos virtuales : implementación de metodología BIM en la docencia universitaria

Los procesos de diseño y construcción en Arquitectura han mostrado un desarrollo de optimización históricamente muy deficiente cuando se compara con las restantes actividades típicamente industriales. La aspiración constante a una industrialización efectiva, tanto en aras de alcanzar mayores cotas de calidad así como de ahorro de recursos, recibe hoy una oportunidad inmejorable desde el ámbito informático: el Building Information Modelling o BIM. Lo que en un inicio puede parecer meramente un determinado tipo de programa informático, en realidad supone un concepto de “proceso” que subvierte muchas rutinas hoy habituales en el desarrollo de proyectos y construcciones arquitectónicas. La inclusión y desarrollo de datos ligados al proyecto, desde su inicio hasta el fin de su ciclo de vida, conlleva la oportunidad de crear una realidad virtual dinámica y actualizable, que por añadidura posibilita su ensayo y optimización en todos sus aspectos: antes y durante su ejecución, así como vida útil. A ello se suma la oportunidad de transmitir eficientemente los datos completos de proyecto, sin apenas pérdidas o reelaboración, a la cadena de fabricación, lo que facilita el paso a una industrialización verdaderamente significativa en edificación. Ante una llamada mundial a la optimización de recursos y el interés indudable de aumentar beneficios económicos por medio de la reducción del factor de incertidumbre de los procesos, BIM supone un opción de mejora indudable, y así ha sido reconocido a través de la inminente implantación obligatoria por parte de los gobiernos (p. ej. Gran Bretaña en 2016 y España en 2018). La modificación de procesos y roles profesionales que conlleva la incorporación de BIM resulta muy significativa y marcará el ejercicio profesional de los futuros graduados en las disciplinas de Arquitectura, Ingeniería y Construcción (AEC por sus siglas en inglés). La universidad debe responder ágilmente a estas nuevas necesidades incorporando esta metodología en la enseñanza reglada y aportando una visión sinérgica que permita extraer los beneficios formativos subyacentes en el propio marco BIM. En este sentido BIM, al aglutinar el conjunto de datos sobre un único modelo virtual, ofrece un potencial singularmente interesante. La realidad tridimensional del modelo, desarrollada y actualizada continuamente, ofrece al estudiante una gestión radicalmente distinta de la representación gráfica, en la que las vistas parciales de secciones y plantas, tan complejas de asimilar en los inicios de la formación universitaria, resultan en una mera petición a posteriori, para ser extraída según necesidad del modelo virtual. El diseño se realiza siempre sobre el propio modelo único, independientemente de la vista de trabajo elegida en cada momento, permaneciendo los datos y sus relaciones constructivas siempre actualizados y plenamente coherentes. Esta descripción condensada de características de BIM preconfiguran gran parte de las beneficios formativos que ofrecen los procesos BIM, en especial, en referencia al desarrollo del diseño integrado y la gestión de la información (incluyendo TIC). Destacan a su vez las facilidades en comprensión visual de elementos arquitectónicos, sistemas técnicos, sus relaciones intrínsecas así como procesos constructivos. A ello se une el desarrollo experimental que la plataforma BIM ofrece a través de sus software colaborativos: la simulación del comportamiento estructural, energético, económico, entre otros muchos, del modelo virtual en base a los datos inherentes del proyecto. En la presente tesis se describe un estudio de conjunto para explicitar tanto las cualidades como posibles reservas en el uso de procesos BIM, en el marco de una disciplina concreta: la docencia de la Arquitectura. Para ello se ha realizado una revisión bibliográfica general sobre BIM y específica sobre docencia en Arquitectura, así como analizado las experiencias de distintos grupos de interés en el marco concreto de la enseñanza de la en Arquitectura en la Universidad Europea de Madrid. El análisis de beneficios o reservas respecto al uso de BIM se ha enfocado a través de la encuesta a estudiantes y la entrevista a profesionales AEC relacionados o no con BIM. Las conclusiones del estudio permiten sintetizar una implantación de metodología BIM que para mayor claridad y facilidad de comunicación y manejo, se ha volcado en un Marco de Implantación eminentemente gráfico. En él se orienta sobre las acciones docentes para el desarrollo de competencias concretas, valiéndose de la flexibilidad conceptual de los Planes de Estudio en el contexto del Espacio Europeo de Educación Superior (Declaración de Bolonia) para incorporar con naturalidad la nueva herramienta docente al servicio de los objetivos formativo legalmente establecidos. El enfoque global del Marco de Implementación propuesto facilita la planificación de acciones formativas con perspectiva de conjunto: combinar los formatos puntuales o vehiculares BIM, establecer sinergias transversales y armonizar recursos, de modo que la metodología pueda beneficiar tanto la asimilación de conocimientos y habilidades establecidas para el título, como el propio flujo de aprendizaje o learn flow BIM. Del mismo modo reserva, incluso visualmente, aquellas áreas de conocimiento en las que, al menos en la planificación actual, la inclusión de procesos BIM no se considera ventajosa respecto a otras metodologías, o incluso inadecuadas para los objetivos docentes establecidos. Y es esta última categorización la que caracteriza el conjunto de conclusiones de esta investigación, centrada en: 1. la incuestionable necesidad de formar en conceptos y procesos BIM desde etapas muy iniciales de la formación universitaria en Arquitectura, 2. los beneficios formativos adicionales que aporta BIM en el desarrollo de competencias muy diversas contempladas en el currículum académico y 3. la especificidad del rol profesional del arquitecto que exigirá una implantación cuidadosa y ponderada de BIM que respete las metodologías de desarrollo creativo tradicionalmente efectivas, y aporte valor en una reorientación simbiótica con el diseño paramétrico y fabricación digital que permita un diseño finalmente generativo. ABSTRACT The traditional architectural design and construction procedures have proven to be deficient where process optimization is concerned, particularly when compared to other common industrial activities. The ever‐growing strife to achieve effective industrialization, both in favor of reaching greater quality levels as well as sustainable management of resources, has a better chance today than ever through a mean out of the realm of information technology, the Building Information Modelling o BIM. What may initially seem to be merely another computer program, in reality turns out to be a “process” concept that subverts many of today’s routines in architectural design and construction. Including and working with project data from the very beginning to the end of its full life cycle allows for creating a dynamic and updatable virtual reality, enabling data testing and optimizing throughout: before and during execution, all the way to the end of its lifespan. In addition, there is an opportunity to transmit complete project data efficiently, with hardly any loss or redeveloping of the manufacture chain required, which facilitates attaining a truly significant industrialization within the construction industry. In the presence of a world‐wide call for optimizing resources, along with an undeniable interest in increasing economic benefits through reducing uncertainty factors in its processes, BIM undoubtedly offers a chance for improvement as acknowledged by its imminent and mandatory implementation on the part of governments (for example United Kingdom in 2016 and Spain in 2018). The changes involved in professional roles and procedures upon incorporating BIM are highly significant and will set the course for future graduates of Architecture, Engineering and Construction disciplines (AEC) within their professions. Higher Education must respond to such needs with swiftness by incorporating this methodology into their educational standards and providing a synergetic vision that focuses on the underlying educational benefits inherent in the BIM framework. In this respect, BIM, in gathering data set under one single virtual model, offers a uniquely interesting potential. The three‐dimensional reality of the model, under continuous development and updating, provides students with a radically different graphic environment, in which partial views of elevation, section or plan that tend characteristically to be difficult to assimilate at the beginning of their studies, become mere post hoc requests to be ordered when needed directly out the virtual model. The design is always carried out on the sole model itself, independently of the working view chosen at any particular moment, with all data and data relations within construction permanently updated and fully coherent. This condensed description of the features of BIM begin to shape an important part of the educational benefits posed by BIM processes, particularly in reference to integrated design development and information management (including ITC). At the same time, it highlights the ease with which visual understanding is achieved regarding architectural elements, technology systems, their intrinsic relationships, and construction processes. In addition to this, there is the experimental development the BIM platform grants through its collaborative software: simulation of structural, energetic, and economic behavior, among others, of the virtual model according to the data inherent to the project. This doctoral dissertation presents a broad study including a wide array of research methods and issues in order to specify both the virtues and possible reservations in the use of BIM processes within the framework of a specific discipline: teaching Architecture. To do so, a literature review on BIM has been carried out, specifically concerning teaching in the discipline of Architecture, as well as an analysis of the experience of different groups of interest delimited to Universidad Europea de Madrid. The analysis of the benefits and/or limitations of using BIM has been approached through student surveys and interviews with professionals from the AEC sector, associated or not, with BIM. Various diverse educational experiences are described and academic management for experimental implementation has been analyzed. The conclusions of this study offer a synthesis for a Framework of Implementation of BIM methodology, which in order to reach greater clarity, communication ease and user‐friendliness, have been posed in an eminently graphic manner. The proposed framework proffers guidance on teaching methods conducive to the development of specific skills, taking advantage of the conceptual flexibility of the European Higher Education Area guidelines based on competencies, which naturally facilitate for the incorporation of this new teaching tool to achieve the educational objectives established by law. The global approach of the Implementation Framework put forth in this study facilitates the planning of educational actions within a common perspective: combining exceptional or vehicular BIM formats, establishing cross‐disciplinary synergies, and sharing resources, so as to purport a methodology that contributes to the assimilation of knowledge and pre‐defined competencies within the degree program, and to the flow of learning itself. At the same time, it reserves, even visually, those areas of knowledge in which the use of BIM processes is not considered necessarily an advantage over other methodologies, or even inadequate for the learning outcomes established, at least where current planning is concerned. It is this last category which characterizes the research conclusions as a whole, centering on: 1. The unquestionable need for teaching BIM concepts and processes in Architecture very early on, in the initial stages of higher education; 2. The additional educational benefits that BIM offers in a varied array of competency development within the academic curriculum; and 3. The specific nature of the professional role of the Architect, which demands a careful and balanced implementation of BIM that respects the traditional teaching methodologies that have proven effective and creative, and adds value by a symbiotic reorientation merged with parametric design and digital manufacturing so to enable for a finally generative design.

Analysis of the behavior of multijunction solar cells under high irradiance Gaussian light profiles showing chromatic aberration with emphasis on tunnel junction performance

In this work, we explain the behavior of multijunction solar cells under non-uniform (spatially and in spectral content) light profiles in general and in particular when Gaussian light profiles cause a photo-generated current density, which exceeds locally the peak current density of the tunnel junction. We have analyzed the implications on the tunnel junction's limitation, that is, in the loss of efficiency due to the appearance of a dip in the I–V curve. For that, we have carried out simulations with our three-dimensional distributed model for multijunction solar cells, which contemplates a full description of the tunnel junction and also takes into account the lateral resistances in the tunnel junction. The main findings are that the current density photo-generated spreads out through the lateral resistances of the device, mainly through the tunnel junction layers and the back contact. Therefore, under non-uniform light profiles these resistances are determinant not only to avoid the tunnel junction's limitation but also for mitigating losses in the fill factor. Therefore, taking into account these lateral resistances could be the key for jointly optimizing the concentrator photovoltaic system (concentrator optics, front grid layout and semiconductor structure)

Topographical and mechanical characterization of living eukaryotic cells on opaque substrates: development of a general procedure and its application to the study of non-adherent lymphocytes

The mechanical behavior of living murine T-lymphocytes was assessed by atomic force microscopy (AFM). A robust experimental procedure was developed to overcome some features of lymphocytes, in particular their spherical shape and non-adherent character. The procedure included the immobilization of the lymphocytes on amine-functionalized substrates, the use of hydrodynamic effects on the deflection of the AFM cantilever to monitor the approaching, and the use of the jumping mode for obtaining the images. Indentation curves were analyzed according to Hertz's model for contact mechanics. The calculated values of the elastic modulus are consistent both when considering the results obtained from a single lymphocyte and when comparing the curves recorded from cells of different specimens

A diversidade cultural e as suas implicações no processo de ensino e aprendizagem : como integrar a diversidade na educação de infância

Relatório de estágio apresentado para obtenção do grau de mestre na especialidade profissional de Educação pré-escolar

Female preference for swords in Xiphophorus helleri reflects a bias for large apparent size

Swordtail fish (Poeciliidae: genus Xiphophorus) are a paradigmatic case of sexual selection by sensory exploitation. Female preference for males with a conspicuous “sword” ornament is ancestral, suggesting that male morphology has evolved in response to a preexisting bias. The perceptual mechanisms underlying female mate choice have not been identified, complicating efforts to understand the selection pressures acting on ornament design. We consider two alternative models of receiver behavior, each consistent with previous results. Females could respond either to specific characteristics of the sword or to more general cues, such as the apparent size of potential mates. We showed female swordtails a series of computer-altered video sequences depicting a courting male. Footage of an intact male was preferred strongly to otherwise identical sequences in which portions of the sword had been deleted selectively, but a disembodied courting sword was less attractive than an intact male. There was no difference between responses to an isolated sword and to a swordless male of comparable length, or between an isolated sword and a homogenous background. Female preference for a sworded male was abolished by enlarging the image of a swordless male to compensate for the reduction in length caused by removing the ornament. This pattern of results is consistent with mate choice being mediated by a general preference for large males rather than by specific characters. Similar processes may account for the evolution of exaggerated traits in other systems.

Physical reasons for the unusual α-helix stabilization afforded by charged or neutral polar residues in alanine-rich peptides

We have carried out conformational energy calculations on alanine-based copolymers with the sequence Ac-AAAAAXAAAA-NH2 in water, where X stands for lysine or glutamine, to identify the underlying source of stability of alanine-based polypeptides containing charged or highly soluble polar residues in the absence of charge–charge interactions. The results indicate that ionizable or neutral polar residues introduced into the sequence to make them soluble sequester the water away from the CO and NH groups of the backbone, thereby enabling them to form internal hydrogen bonds. This solvation effect dictates the conformational preference and, hence, modifies the conformational propensity of alanine residues. Even though we carried out simulations for specific amino acid sequences, our results provide an understanding of some of the basic principles that govern the process of folding of these short sequences independently of the kind of residues introduced to make them soluble. In addition, we have investigated through simulations the effect of the bulk dielectric constant on the conformational preferences of these peptides. Extensive conformational Monte Carlo searches on terminally blocked 10-mer and 16-mer homopolymers of alanine in the absence of salt were carried out assuming values for the dielectric constant of the solvent ɛ of 80, 40, and 2. Our simulations show a clear tendency of these oligopeptides to augment the α-helix content as the bulk dielectric constant of the solvent is lowered. This behavior is due mainly to a loss of exposure of the CO and NH groups to the aqueous solvent. Experimental evidence indicates that the helical propensity of the amino acids in water shows a dramatic increase on addition of certain alcohols, such us trifluoroethanol. Our results provide a possible explanation of the mechanism by which alcohol/water mixtures affect the free energy of helical alanine oligopeptides relative to nonhelical ones.

Forming classes by stimulus frequency: Behavior and theory

Visual classification is the way we relate to different images in our environment as if they were the same, while relating differently to other collections of stimuli (e.g., human vs. animal faces). It is still not clear, however, how the brain forms such classes, especially when introduced with new or changing environments. To isolate a perception-based mechanism underlying class representation, we studied unsupervised classification of an incoming stream of simple images. Classification patterns were clearly affected by stimulus frequency distribution, although subjects were unaware of this distribution. There was a common bias to locate class centers near the most frequent stimuli and their boundaries near the least frequent stimuli. Responses were also faster for more frequent stimuli. Using a minimal, biologically based neural-network model, we demonstrate that a simple, self-organizing representation mechanism based on overlapping tuning curves and slow Hebbian learning suffices to ensure classification. Combined behavioral and theoretical results predict large tuning overlap, implicating posterior infero-temporal cortex as a possible site of classification.

Imaging neuroscience: Principles or maps?

This article reviews some recent trends in imaging neuroscience. A distinction is made between making maps of functional responses in the brain and discerning the rules or principles that underlie their organization. After considering developments in the characterization of brain imaging data, several examples are presented that highlight the context-sensitive nature of neuronal responses that we measure. These contexts can be endogenous and physiological, reflecting the fact that each cortical area, or neuronal population, expresses its dynamics in the context of interactions with other areas. Conversely, these contexts can be experimental or psychological and can have a profound effect on the regional effects elicited. In this review we consider experimental designs and analytic strategies that go beyond cognitive subtraction and speculate on how functional imaging can be used to address both the details and principles underlying functional integration and specialization in the brain.

Thyroid hormone and estrogen interact to regulate behavior.

Environmental perturbations that increase plasma thyroid hormone (T3) concentrations also profoundly affect female reproductive behavior and physiology. We explored whether these effects were mediated by interactions between T3 receptor (TR) and estrogen receptor (ER). This hypothesis was of interest because the half-site of a consensus T3 response element DNA sequence is identical to an ER response element (ERE), and TRs bind to a consensus ERE. Molecular data presented in the accompanying paper [Zhu, Y.-S., Yen, P.M., Chin, W.W.& Pfaff, D.W. (1996) Proc. Natl. Acad. Sci. USA 93, 12587-12592] demonstrate that TRs and ERs are both present in rat hypothalamic nuclear extracts and that both can bind to the promoter the hypothalamic gene preproenkephalin and that interations between liganded TRs and ERs affect preproenkephalin transcription. In this paper, we show that molecular interactions between TRs and ERs are sufficient to mediate environmental effects on estrogen-controlled reproductive behavior. Ovariectomized (OVX) rats treated with high doses of T3 showed significantly lower levels of lordosis behavior in response to estradiol benzoate (EB) compared with OVX females treated with EB alone. Conversely, thyroidectomized/OVX females treated with EB showed significantly greater levels of lordosis behavior compared with OVX females treated with EB, showing the effect of endogenous T3. Thyroid hormone interference with EB-induced behavior could not be explained by a reduction in plasma E2 concentrations or by a general reduction in responsiveness of EB-sensitive tissues. Moreover, numbers of hypothalamic ER-immunoreactive cells increased dramatically following T3 treatment. These data suggest that T3 may reduce EB-dependent sexual behavior through interactions between TR and ER in the nuclei of behaviorally relevant hypothalamic neurons, envisioning for the first time a functional consequence of interactions between two nuclear hormone receptors in brain. These results also open up the possibility of molecular interactions on DNA encoding environmental signals, a new field for the study of neuronal integration.

Self-Injurious Behavior And Its Relationship To Eating Disorder Symptom Severity

Widely held clinical assumptions about self-harming eating disorder patients were tested in this project. Specifically, the present study had two aims: (1) to confirm research that suggests patients with self-injurious behavior exhibit greater severity in eating disorder symptomology; and (2) to document the treatment course for these patients (e.g. reported change in eating disorder attitudes, beliefs, and behaviors) from admission to discharge. Data from 43 participants who received treatment at a Partial Hospitalization Program (PHP) for Eating Disorders were used in the current study. The length of treatment required for study inclusion reflected mean lengths of stay (Williamson, Thaw, & Varnardo-Sullivan, 2001) and meaningful treatment lengths in prior research (McFarlane et al., 2013; McFarlane, Olmsted, & Trottier, 2008): five to eight weeks. Scores on the Eating Disorder Inventory-III (Garner, 2004) at the time of admission and discharge were compared. These results suggest that there are no significant differences between eating disordered patients who engage in self-injury and those who do not in terms of symptom severity or pathology at admission. The results further suggest that patients in both groups see equivalent reductions in symptoms from admission to discharge across domains and also share non-significant changes in emotional dysregulation over the course of treatment. Importantly, these results also suggest that general psychological maladjustment is higher at discharge for eating disordered patients who engage in self-injury.