Detrital zircon geochronology data, petrographic point count data and paleocurrent indicator data of Triassic turbidites in the Nanpanjiang Basin, South China

Triassic turbidites of the Nanpanjiang basin of south China represent the most expansive and voluminous siliciclastic turbidite accumulation in south China. The Nanpanjiang basin occurs at a critical junction between the southern margin of the south China plate and the Indochina, Siamo and Sibumasu plates to the south and southwest. The Triassic Yangtze carbonate shelf and isolated carbonated platforms in the basin have been extensively studied, but silicilastic turbidites in the basin have received relatively little attention. Deciphering the facies, paleocurrent indicators and provenance of the Triassic turbidites is important for several reasons: it promises to help resolve the timing of plate collisions along suture zones bordering the basin to the south and southwest, it will enable evaluation of which suture zones and Precambrian massifs were source areas, and it will allow an evaluation of the impact of the siliciclastic flux on carbonate platform evolution within the basin. Turbidites in the basin include the Early Triassic Shipao Formation and the Middle-Late Triassic Baifeng, Xinyuan, Lanmu Bianyang and Laishike formations. Each ranges upward of 700 m and the thickest is nearly 3 km. The turbidites contain very-fine sand in the northern part of the basin whereas the central and southern parts of the basin also commonly contain fine and rarely medium sand size. Coarser sand sizes occur where paleocurrents are from the south, and in this area some turbidites exhibit complete bouma sequences with graded A divisions. Successions contain numerous alternations between mud-rich and sand-rich intervals with thickness trends corresponding to proximal/ distal fan components. Spectacularly preserved sedimentary structures enable robust evaluation of turbidite systems and paleocurrent analyses. Analysis of paleocurrent measurements indicates two major directions of sediment fill. The northern part of the basin was sourced primarily by the Jiangnan massif in the northeast, and the central and southern parts of the basin were sourced primarily from suture zones and the Yunkai massif to the south and southeast respectively. Sandstones of the Lower Triassic Shipao Fm. have volcaniclastic composition including embayed quartz and glass shards. Middle Triassic sandstones are moderately mature, matrix-rich, lithic wackes. The average QFL ratio from all point count samples is 54.1/18.1/27.8% and the QmFLt ratio is 37.8/ 18.1/ 44.1%. Lithic fragments are dominantly claystone and siltstone clasts and metasedimentary clasts such as quartz mica tectonite. Volcanic lithics are rare. Most samples fall in the recycled orogen field of QmFLt plots, indicating a relatively quartz and lithic rich composition consistent with derivation from Precambrian massifs such as the Jiangnan, and Yunkai. A few samples from the southwest part of the basin fall into the dissected arc field, indicating a somewhat more lithic and feldspar-rich composition consistent with derivation from a suture zone Analysis of detrial zircon populations from 17 samples collected across the basin indicate: (1) Several samples contain zircons with concordant ages greater than 3000 Ma, (2) there are widespread peaks across the basin at 1800 Ma and 2500, (3) a widespread 900 Ma population, (3) a widespread population of zircons at 440 Ma, and (5) a larger population of younger zircons about 250 Ma in the southwestern part which is replaced to the north and northwest by a somewhat older population around 260-290 Ma. The 900 Ma provenance fits derivation from the Jiangnan Massif, the 2500, 1800, and 440 Ma provenance fits the Yunkai massif, and the 250 Ma is consistent with convergence and arc development in suture zones bordering the basin on the south or southwest. Early siliciclastic turbidite flux, proximal to source areas impacted carbonate platform evolution by infilling the basin, reducing accommodation space, stabilizing carbonate platform margins and promoting margin progradation. Late arrival, in areas far from source areas caused margin aggradation over a starved basin, development of high relief aggradational escarpments and unstable scalloped margins.

Composition of Aleutian forearc sediments

The ultimate composition of any sandstone is affected by a host of primary and secondary factors, including the lithologies present in source terranes, climate, depositional environment and diagenesis. In the case of a subduction complex, however, unequivocal identification of detrital provenance may be impossible because of the cumulative effects of tectonic and sedimentary transport. Long-distance sedimentary transport (> 1000 km) is common within trenches, and abyssal-plain turbidites can be tectonically transported for long distances as the underlying oceanic basement drifts towards a subduction front. Post-accretionary displacement can occur as a consequence of strike-slip faulting, and the total distance of tectonic dislocation may reach several thousand kilometers. The present-day Aleutian forearc region (North Pacific Ocean) illustrates many of the "problems" which typify subduction zones. Several petrologic suites can be identified, and there are significant variations in detrital modes in both time and space. The Aleutian region serves as a sobering modern analog for accreted rock units such as the Franciscan Complex of California, where intercalations of discrete sandstone suites have been noted. In the absence of paleomagnetic control, interpretations of sediment provenance within ancient subduction complexes probably should be restricted to the generic level.

Mineralogical compositions of sediment samples from the San Francisco Bay coastal system

The mineralogical compositions of 119 samples collected from throughout the San Francisco Bay coastal system, including bayfloor and seafloor, area beaches, cliff outcrops, and major drainages, were determined using X-ray diffraction (XRD). Comparison of the mineral concentrations and application of statistical cluster analysis of XRD spectra allowed for the determination of provenances and transport pathways. The use of XRD mineral identifications provides semi-quantitative compositions needed for comparisons of beach and offshore sands with potential cliff and river sources, but the innovative cluster analysis of XRD diffraction spectra provides a unique visualization of how groups of samples within the San Francisco Bay coastal system are related so that sand-sized sediment transport pathways can be inferred. The main vector for sediment transport as defined by the XRD analysis is from San Francisco Bay to the outer coast, where the sand then accumulates on the ebb tidal delta and also moves alongshore. This mineralogical link defines a critical pathway because large volumes of sediment have been removed from the Bay over the last century via channel dredging, aggregate mining, and borrow pit mining, with comparable volumes of erosion from the ebb tidal delta over the same period, in addition to high rates of shoreline retreat along the adjacent, open-coast beaches. Therefore, while previously only a temporal relationship was established, the transport pathway defined by mineralogical and geochemical tracers support the link between anthropogenic activities in the Bay and widespread erosion outside the Bay. The XRD results also establish the regional and local importance of sediment derived from cliff erosion, as well as both proximal and distal fluvial sources. This research is an important contribution to a broader provenance study aimed at identifying the driving forces for widespread geomorphic change in a heavily urbanized coastal-estuarine system.

Chemistry of volcanic ash layers from the southern Atlantic

Petrographic and geochemical investigations were carried out on 21 ash layers from four sites of ODP Legs 113 and 114 in the southern Atlantic Ocean. With the help of geochemical data and petrographic characterization three rock series can be distinguished for stratigraphically different ash layers from Site 701 (Leg 114) located east of the South Sandwich Island Arc, whereas the Leg 113 tephras from the southern slope of the South Orkney Microcontinent belong to another magmatic series. Geochemical correlation of the Leg 113 tephras with possible source areas indicates that they were probably erupted from the Antarctic Peninsula. The Miocene ashes from Site 701 are probably derived from the now-extinct Discovery Arc, the precursor of the South Sandwich Islands. The Pliocene ashes from the site show some affinity with the South Shetland Islands, although the available data do not permit a clear correlation. The Quaternary ashes from Site 701 display a chemistry typical of island-arc tholeiites and are therefore most probably derived from eruptions on the South Sandwich Islands. Because of their distant position the southern Andes seem to be rather improbable as a potential source region for the tephra layers investigated.

Composition of airborne material from yellow snow fallen in the Russian North

Large amounts of dust responsible for bright colors of atmospheric precipitation in the temperate, subpolar and polar zones of the northern hemisphere have been rarely observed. In the twentieth century and in the beginning of the twenty first century in the Northern European Russia such events were not registered up to March 25-26, 2008. At that time in some parts of the Arkhangel'sk region, Komi Republic, and Nenets Autonomous Area atmospheric precipitation as sleet and rain responsible for sand- and saffron colors of ice crust formation on the snow surface was observed. During detailed mineralogical, geochemical, pollen, diatom and meteorological investigations it was established that semidesert and steppe regions of the Northwest Kazakhstan, Volgograd and Astrakhan' regions, and Kalmykia are the main sources of the yellow dust.

Fine-silt luminescence dating and mineral composition of sediments from the Arctic Ocean

New geochronometers are needed for sediments of the Arctic Ocean spanning at least the last half million years, largely because oxygen-isotope stratigraphy is relatively ineffective in this ocean, and because other dating techniques require significant assumptions about sedimentation rates. Multi-aliquot luminescence sediment-dating procedures were applied to polymineral, fine-silt samples from 9 core-top and 37 deeper samples from 20 cores representing 19 sites across the Arctic Ocean. Most samples have independent age assignments and other known properties (e.g., % coarse fraction, % carbonate, U-Th isotopes). Thick-source alpha-particle counting indicates that for most regions the contribution of measured unsupported 230Th and 231Pa to calculated dose rates is <ca+5-11%. IR-PSL dating of polymineral fine-silt fractions from core-top and near-core-top samples indicates that three sites (mainly from the western Arctic Ocean) have long-bleach inherited ages of only 3-7 kyr, suggesting potential for accurate PSL and TL dating without an inherited correction when older interglacial samples are selected. Samples from a giant gravity core from the western region (Northwind Ridge) yield acceptable long-bleach TL and IR-PSL ages up to 100 kyr. A sample from the eastern region (near Gakkel Ridge) gives a long-bleach age of ca 60 kyr, agreeing with an independent age assignment. Several samples in the 10-40 kyr 14C range from other sites produce large long-bleach age overestimates, indicating the variable effects of ice-rafting and other depositional and bottom-currentreworking (re-suspension) processes during glacial stages. Short-bleach dating tests provide IR-PSL age estimates for core tops that appear to penetrate the 'reworking veil' of inherited ages, and not only suggest a procedure to greatly reduce long-bleach inherited ages but also have implications for the 14C reservoir correction. This study identifies the most promising regions for future luminescence dating, and suggests that for several regions of the Arctic Ocean, interglacial-stage (foram-'rich') sediments from ridge tops are preferred for the fine-grain luminescence dating methods.