Saving energy in the GFRP pultrusion process

This study addresses to the optimization of pultrusion manufacturing process from the energy-consumption point of view. The die heating system of external platen heaters commonly used in the pultrusion machines is one of the components that contribute the most to the high consumption of energy of pultrusion process. Hence, instead of the conventional multi-planar heaters, a new internal die heating system that leads to minor heat losses is proposed. The effect of the number and relative position of the embedded heaters along the die is also analysed towards the setting up of the optimum arrangement that minimizes both the energy rate and consumption. Simulation and optimization processes were greatly supported by Finite Element Analysis (FEA) and calibrated with basis on the temperature profile computed through thermography imaging techniques. The main outputs of this study allow to conclude that the use of embedded cylindrical resistances instead of external planar heaters leads to drastic reductions of both the power consumption and the warm-up periods of the die heating system. For the analysed die tool and process, savings on energy consumption up to 60% and warm-up period stages less than an half hour were attained with the new internal heating system. The improvements achieved allow reducing the power requirements on pultrusion process, and thus minimize industrial costs and contribute to a more sustainable pultrusion manufacturing industry.

Innovation through virtual communities of practice: motivations and constraints in the knowledge-creation process

This paper appears in International Journal of Projectics. Vol 4(1), pp. 39-49

Innovative manufacturing process for hybrid pultruded products based on cork and polymeric pre-shapes

Pultruded products are being targeted by a growing demand due to its excellent mechanical properties and low chemical reactivity, ensuring a low level of maintenance operations and allowing an easier assembly operation process than equivalent steel bars. In order to improve the mechanical drawing process and solve some acoustic and thermal insulation problems, pultruded pipes of glass fibre reinforced plastics (GFRF) can be filled with special products that increase their performance regarding the issues previously referred. The great challenge of this work was drawing a new equipment able to produce pultruded pipes filled with cork or polymeric pre-shaped bars as a continuous process. The project was carried out successfully and the new equipment was built and integrated in the pultrusion equipment already existing, allowing to obtain news products with higher added-value in the market, covering some needs previously identified in the field of civil construction.

Design of experiments applied to the mix design process of polymer mortar materials modified with GFRP recyclates

In this work, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behavior of polyester polymer mortar (PM) materials was assessed. For this purpose, different contents of GFRP recyclates (between 4% up to 12% in mass), were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of silane coupling agent addition to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers, jointly with unfinished products and scrap resulting from pultrusion manufacturing process, are landfilled, with supplementary added costs. Thus, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and reinforcement for PM materials, with significant improvements on mechanical properties with regard to non-modified formulations.

Optimization of the Pultrusion process

Manufacturing processes need permanently to innovate and optimize because any can be susceptible to continuous improvement. Innovation and commitment to the development of these new solutions resulting from existing expertise and the continuing need to increase productivity, flexibility and ensuring the necessary quality of the manufactured products. To increase flexibility, it is necessary to significantly reduce set-up times and lead time in order to ensure the delivery of products ever faster. This objective can be achieved through a normalization of the pultrusion line elements. Implicitly, there is an increase of productivity by this way. This work is intended to optimize the pultrusion process of structural profiles. We consider all elements of the system from the storehouse of the fibers (rack) to the pultrusion die. Particular attention was devoted to (a) the guidance system of the fibers and webs, (b) the resin container where the fibers are impregnated, (c) standard plates positioning of the fibers towards the entrance to the spinneret and also (d) reviewed the whole process of assembling and fixing the die as well as its the heating system. With the implementation of these new systems was achieved a significant saving of time set-up and were clearly reduced the unit costs of production. Quality assurance was also increased.

Optimizing the embedded heaters position in the pultrusion process using finite element analysis

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimize heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed with basis on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Numerical Method to Predict Void Formation during The Liquid Composite Molding Process

Void formation during the injection phase of the liquid composite molding process can be explained as a consequence of the non-uniformity of the flow front progression. This is due to the dual porosity within the fiber perform (spacing between the fiber tows is much larger than between the fibers within in a tow) and therefore the best explanation can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter of the order of millimeters. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the open spaces between the fiber tows must be considered and the coupling between the flow regimes must be addressed. In such cases, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to illposing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. A numerical procedure was formulated and is implemented in an existing Free Boundary Program to reduce this error significantly.

Performance of concrete made with aggregates recycled from precasting industry waste: influence of the crushing process

The aim of this paper is to evaluate the influence of the crushing process used to obtain recycled concrete aggregates on the performance of concrete made with those aggregates. Two crushing methods were considered: primary crushing, using a jaw crusher, and primary plus secondary crushing (PSC), using a jaw crusher followed by a hammer mill. Besides natural aggregates (NA), these two processes were also used to crush three types of concrete made in laboratory (L20, L45 e L65) and three more others from the precast industry (P20, P45 e P65). The coarse natural aggregates were totally replaced by coarse recycled concrete aggregates. The recycled aggregates concrete mixes were compared with reference concrete mixes made using only NA, and the following properties related to the mechanical and durability performance were tested: compressive strength; splitting tensile strength; modulus of elasticity; carbonation resistance; chloride penetration resistance; water absorption by capillarity; water absorption by immersion; and shrinkage. The results show that the PSC process leads to better performances, especially in the durability properties.

Semi-destructive in situ tests as support to the assessment of a conservation process

This paper refers to the assessment on site by semi-destructive testing (SDT) methods of the consolidation efficiency of a conservation process developed by Henriques (2011) for structural and non-structural pine wood elements in service. This study was applied on scots pine wood (Pinus sylvestris L.) degraded by fungi after treatment with a biocidal product followed by consolidation with a polymeric product. This solution avoids substitutions of wood moderately degraded by fungi, improving its physical and mechanical characteristics. The consolidation efficiency was assessed on site by methods of drill resistance and penetration resistance. The SDT methods used showed good sensitivity to the conservation process and could evaluate their effectiveness. (C) 2015 Elsevier Ltd. All rights reserved.

The impact of driving styles on fuel consumption: a data-warehouse-and-data-mining-based discovery process

This paper discusses the results of applied research on the eco-driving domain based on a huge data set produced from a fleet of Lisbon's public transportation buses for a three-year period. This data set is based on events automatically extracted from the control area network bus and enriched with GPS coordinates, weather conditions, and road information. We apply online analytical processing (OLAP) and knowledge discovery (KD) techniques to deal with the high volume of this data set and to determine the major factors that influence the average fuel consumption, and then classify the drivers involved according to their driving efficiency. Consequently, we identify the most appropriate driving practices and styles. Our findings show that introducing simple practices, such as optimal clutch, engine rotation, and engine running in idle, can reduce fuel consumption on average from 3 to 5l/100 km, meaning a saving of 30 l per bus on one day. These findings have been strongly considered in the drivers' training sessions.

Use of quantitative structure-property relationships to study the solvation process of 18-crown-6

Solution enthalpies of 18-crown-6 have been obtained for a set of 14 protic and aprotic solvents at 298.15 K. The complementary use of Solomonov's methodology and a QSPR-based approach allowed the identification of the most significant solvent descriptors that model the interaction enthalpy contribution of the solution process (Delta H-int(A/S)). Results were compared with data previously obtained for 1,4-dioxane. Although the interaction enthalpies of 18-crown-6 correlate well with those of 1,4-dioxane, the magnitude of the most relevant parameters, pi* and beta, is almost three times higher for 18-crown-6. This is rationalized in terms of the impact of the solute's volume in the solution processes of both compounds. (C) 2015 Elsevier B.V. All rights reserved.

Optimization of antioxidants extraction from coffee silverskin, aroasting by-product, having in view a sustainable process

Coffee silverskin is a major roasting by-product that could be valued as a source of antioxidant compounds. The effect of the major variables (solvent polarity, temperature and extraction time) affecting the extraction yields of bioactive compounds and antioxidant activity of silverskin extracts was evaluated. The extracts composition varied significantly with the extraction conditions used. A factorial experimental design showed that the use of a hydroalcoholic solvent (50%:50%) at 40 °C for 60 min is a sustainable option to maximize the extraction yield of bioactive compounds and the antioxidant capacity of extracts. Using this set of conditions it was possible to obtain extracts containing total phenolics (302.5 ± 7.1 mg GAE/L), tannins (0.43 ± 0.06 mg TAE/L), and flavonoids (83.0 ± 1.4 mg ECE/L), exhibiting DPPHradical dot scavenging activity (326.0 ± 5.7 mg TE/L) and ferric reducing antioxidant power (1791.9 ± 126.3 mg SFE/L). These conditions allowed, in comparison with other “more effective” for some individual parameters, a cost reduction, saving time and energy.

Estudo sobre o insight em pessoas com psicose

Para além das variáveis clínicas e sociodemográficas existem concerteza importantes componentes individuais que desempenham um contributo importante no nível de insight apresentado por cada pessoa doente, por exemplo, o nível de inteligência, personalidade, cultura, experiências passadas, memória, etc. A natureza clínica, emocional e/ou intelectual do termo ajuda-nos a compreender a complexidade da dificuldade que existe na sua tradução e, inclusive, na sua compreensão. Daí que as definições atribuídas ao conceito sejam muito distintas e variem consoante a formação teórica do autor/investigador. Pretende-se, a partir dessa identificação/compreensão, promover a qualidade de vida destas pessoas através do desenvolvimento de novas aprendizagens que possibilitem uma cooperação activa. É igualmente fundamental ir ao encontro das capacidade intactas de maneira a possibilitar a aquisição de novos(s) comportamento(s) que tenham um impacte positivo nas queixas, sinais, sintomas, incapacidade e disfuncionalidade apresentados pelo/a utente. Uma vez que a própria conceptualização do termo traduzirá aquilo que se pretende avaliar,será efectuada uma reflexão detalhada acerca dos instrumentos e definições que têm sido mais utilizadas para explorar o insight nas psicoses.Procurei, no meu trabalho de investigação, realçar e promover a importância que cada sujeito, alvo de intervenção, desempenha ao longo do seu processo de recuperação e na prevenção de recaídas. No seguimento dos objectivos acima descritos, para além da revisão teórica efectuada ao fenómeno em termos de conceptualização e estudos desenvolvidos na área de investigação, foi,neste estudo, realizada a contribuição para a validação do instrumento “Assessment of Insight in Psychosis: a re-standartization of a New Scale” de Marková & Berrios (2003).O fenómeno de insight escolhido pela Insight Scale, relata menos as mudanças vividas em relação à doença mental, e mais a actual consciência e articulação de tais mudanças. Tendo como base uma abordagem psicopedagógica, o fenómeno do insight aqui explorado assentou numa perspectiva reabilitativa, actual e multidimensional, que fosse para além das dimensões clínicas tradicionais. Neste sentido é apresentada uma escala original, intitulada “Escala de Avaliação do Insight e Identificação das Necessidades em Pessoas com Psicose”, bem como um modelo de intervenção psicopedagógico breve, assente nos pressupostos descritos ao longo do trabalho.-----------------------------------------ABSTRACT: The importance of insight in people with mental illnesses was first studied in psychiatry, in the first decades of the 20th century, by people as important as Lewis (1934) and Jaspers (1959). However, this field of investigation was left unexplored for many years. Only in the last decade has this phenomenon become the object of numerous scientific investigations, having been given special attention by its investigators. For this reason a significant number of instruments for evalauting insight in psychotic disorders were developed. Since then many papers have been published, which has allowed for a more in depth knowledge on the subject. Therefore, in recent years, the concept of insight has been developed in an attempt to clarify its compexity. A once dichotomic phenomenon, described in terms of presence or absence, became considered multidimensional, which made the identification of different levels of insight and different dimensions possible. Current concepts categorize insight into five dimensions: the awareness of the patient in relation to his/her mental illness, the awareness of the patient in relation to the social consequences of his/her illness, the awareness of the need for treatment, the awareness of the symptoms and the explanation of those symptoms in relation to the illness. The lack of insight in psychiatry, in general terms, and as this phenomenon has been described, the lack of awareness of having a mental illness, represents one of the most common symptoms of schizophrenia and affects a big part of the population that suffer from this illness. It is estimated that bewteen 50 and 80 per cent of patients with schizophrenia do not believe that they are ill, which, consequently has a big impact in the process of adherence to treatment. It is still not possible, however, to identify all the factors that determine the lack of insight in schizophrenics. There are psychological, social and cultural influences that almost certainly play their role in the lack of insight registered in this pathology.Since the impact of scizophrenia is felt in many aspects of the individual’s life, its effective treatment should be directed at various levels, including the improvement of insight. One of the objectives of this study is to explore the relationship between the level of insight in psychosis and the clinical and sociodemographic variables, the psychopathology and its global functioning. As well as the clinical and sociodemographic variables, there are of course important individual components that contribute to the level of insight seen in each patient, for example, their level of inteligence, personality, culture, past experiences, memory, etc. The clinical, emotional and/or intelectual nature of the term helps us understand the difficulty that lies in its interpretation as well as in its comprehension. Therefore, the definitions attributed to the term are very different and vary according to the theoretical training of the investigator. It is intended, from this identification/understanding, to promote the quality of life of these people through the development of new findings that might enable an active cooperation. It is equally fundamental to observe their unimpaired capacities in order to enable the acquisition of new behaviour(s) that have a positive impact on the complaints, signs, symptoms, incapacity and disfunctioning seen in the patient.As the actual comprehension of the term explains what we intend to evaluate, a detailed reflection is made on the instruments and definitions that have been used the most to explore insight in psychosis.In this investigation I tried to underline and promote the importance that each subject, undergoing medical intervention, plays during his/her process of recovery and prevention of relapses. Considering the above mentioned objectives, as well as a theoretical review of the phenomenon in terms of conceptualization and investigative studies developed, this study contributed to the validation of the instrument.The insight phenomenon chosen by the “Insight Scale”, records less changes experienced in relation to the mental illness and more actual awareness and articulation of these changes. Based on a psychopedagogical approach, the insight phenomenon explored here settled on a rehabilitation, current and multidimensional perspective that would go beyond the traditional clinical dimensions. For this reason an original scale entitled “Insight Evaluation Scale and Need Identification in Psychosis Patients” is presented, as well as a psychopedagogical intervention model soon to be used with admitted patients based on the presuppositions described in this study.

Adesão ao regime terapêutico na pessoa com enfarte agudo do miócardio: contributo dos enfermeiros no internamento hospita

RESUMO: O Enfarte Agudo do Miocárdio (EAM) representa um dos principais problemas de saúde pública em Portugal. A rápida intervenção nos factores de risco determinantes da saúde cardíaca pode ter um impacto positivo em vários indicadores de saúde. O objectivo final dessa intervenção passa por capacitar a pessoa, para que, autonomamente, adopte um conjunto de comportamentos de saúde, baseados em estilos de vida protectores da saúde cardíaca, que favorecem positivamente o processo de reabilitação. Esta procura e aquisição do comportamento de saúde, adesão ao regime terapêutico, deve ser desenvolvido em parceria com os profissionais de saúde. O hospital representa a porta de entrada da pessoa com EAM no sistema de saúde. É neste contacto que se inicia uma intervenção de sensibilização e promoção da adesão ao regime terapêutico. Sendo os enfermeiros um grupo profissional que estabelece uma relação continua com a pessoa, importa conhecer um conjunto de dimensões do desempenho dos enfermeiros na promoção da adesão ao regime terapêutico. Breve referência ao desenho de estudo. Foram incluídas no estudo 143 enfermeiros de 9 serviços hospitalares da Região de Saúde de Lisboa e Vale do Tejo. Os dados foram obtidos através de um questionário auto-preenchido. Os dados mostraram que a população de enfermeiros é jovem (M= 30,5: dp= 8,0), 49% têm uma idade £ 26 anos e apresenta pouca experiência profissional (M=7,7; dp= 7,6), 48,2% exerce a profissão há menos de 3 anos. A antiguidade no serviço actual é reduzida (M= 4,7; dp= 4,6), 48,9% estão no serviço há menos de 2 anos. Os enfermeiros acreditam que deviam intervir com mais frequência nos factores de risco fisiológicos e comportamentais que nos factores psicossociais e ambientais; a confiança que têm nas capacidades para intervir nos factores de risco fisiológicos e comportamentais é maior que nos factores psicossociais e ambientais e no último ano, intervieram mais frequentemente nos factores de risco fisiológicos e comportamentais que nos psicossociais e ambientais. O “ensaio” da validação da escala de Will scale de Anderson et al (2004), sobre a capacidade de intervenção na saúde cardíaca, mostrou que o teste de Esfericidade de Bartlett e Medida de adequação da amostragem de Kaiser-Meyer- Olkin (KMO) permitiram a realização da análise factorial em componentes principais (AFCP). Da AFCP emergiram 16 factores, os mesmos que no estudo original de Anderson et al (2004), que revelaram boa consistência interna, com valores de alpha de Cronbach que variaram entre 0,71 a 0,98. Os resultados revelam a necessidade de sensibilizar os enfermeiros para valorizar a intervenção no âmbito dos factores de risco psicossociais e ambientais para promover a adesão ao regime terapêutico. Sugerem ainda que a intervenção baseada na evidência pode ser potenciada de forma a melhorar as práticas de cuidados dos enfermeiros. ABSTRACT: Myocardial infarction (MI) is one of the most important problems in public health in Portugal. A prompt intervention in cardiac health determinants means a positive impact in health outcomes, individually and collectively. The main purpose of this intervention lays on patient’s empowerment so he or she becomes able to choose healthy behaviours, based on heart health protective life styles, and therefore to manage his/hers therapeutic regime. This search and acquisition of health behaviours leading to therapeutic regime adherence may positively have an influence on the whole rehabilitation process and it must be developed in partnership with health workers. MI patients’ first contact with the Health System usually happens at the Hospital. Here the first steps are taken to start an intervention in order to promote therapeutic regime adherence. Nurses are a group of health workers who establish a unique and continuous relation with patients, so it matters to have knowledge of their performance skills that can actually promote a healthy behaviours and increase therapeutic regime adherence. Short Study design The study sample includes 143 nurses working on 9 different hospital wards, belonging to the Lisboa and Tejo’s Valley Health Region, in the district of Lisbon. Data were collected trough a self-administered questionnaire. It revealed that the nurses sample is a young population (M=30,5; dp=8,0), 49% of whom are aged less than 26 years old and has little professional experience (M=7,7; dp= 7,6); 48,2% work has nurses for less than 3 years. There’s a low percentage of seniority (M=4,7; dp=4,6), 48,9% of nurses work in these wards for less than 2 years. Nurses believe they should have intervene more frequently in physiological and behaviour risk factors than in psychological, social and environmental factors; they have greater confidence in their ability to intervene in physiological and behaviour risk factors than to intervene in psychological, social and environmental factors. In last year they took interventions more frequently in physiological and behaviour risk factors than in the other health determinants. The Scale Validation “essay” on Will Scale (Anderson et al, 2004), about heart health intervention capacity, revealed that the Bartlett’s test sphericity and the Kaiser-Meyer- Olkin’s (KMO) appropriate sample measure allowed the factorial analysis on main components (FAMC). From FAMC emerged 16 factors, the same number found on Anderson’s et al (2004) study, revealing good internal consistence, with Cronbach’s alpha values that varied between 0,71 and 0,98. The results point a need for nurses to attribute bigger value to other health determinants intervention - such as psychological, social and environmental determinants - so they’ll take part in promoting therapeutic regime adherence. The results also suggest t

Prova de Consciência Morfológica (PCM): contributos para a sua validação

A relação entre consciência fonológica e consciência morfológica e a contribuição independente de cada uma para a aprendizagem da leitura não reúnem ainda consenso na literatura. Alguns autores argumentam que a consciência morfológica não contribui de forma independente da consciência fonológica para a aprendizagem da leitura. No entanto, outros encontraram dados que indicam que a consciência morfológica tem um papel específi co na progressão da aprendizagem da leitura. Todavia, para além da variedade de tarefas usadas não permitir a comparação de resultados, a ausência de estudos prévios sobre a validade e a fi delidade das mesmas conduz a resultados cuja confi abilidade pode ser posta em causa. Este estudo tem como objetivo apresentar uma análise das qualidades psicométricas da PCM - Prova de Consciência Morfológica. A amostra é constituída por 243 crianças do 2.º (n = 79), 3.º (n = 83) e 4.º (n = 81) anos frequentando escolas públicas, urbanas, do distrito do Porto (norte de Portugal). Os resultados revelaram que a PCM possui uma elevada consistência interna (α = .95). Na análise em componentes principais, foi extraído um único fator, com valor próprio igual a 10.88, que explica 54.42% da variância total dos resultados. Os itens são todos saturados no fator, variando as saturações fatoriais entre um mínimo de .42 e o máximo de .91