999 resultados para sustentabilidade, eficiência energética


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O estudo tem como objetivo avaliar o processo de sustentabilidade em sistemas agrícolas, tendo como parâmetros os fluxos energético e econômico dentre seus compartimentos, cuja dinâmica é regida pela agrodiversidade de um ambiente agrário em transição. O trabalho de campo foi realizado no município de Igarapé-Açu, Nordeste do Pará. Inicialmente foi feito um survey em 60 unidades produtivas, seguindo-se da aplicação de questionário em 25 unidades, de uma modelagem sistémica em 11 unidades, subsidiada por um exame de contexto, além das entrevistas com agentes produtivos locais ligados direta ou indiretamente a ramos de interesses agrícolas. O resultado das análises revelou mecanismos que caracterizam as distintas lógicas que orientam os processos ecológicos e económicos no contexto da agrodiversidade local/regional. Os fenômenos que ocorrem no campo energético material não guardam correlação direta com os fenômenos de natureza econômica. Não há nem mesmo analogia, visto que os parâmetros adimensionais divergem em valores e padrão. Do ponto de vista da dinâmica ecológica/energética, a informação de maior relevância foi sobre o grau de dependência dos agricultores aos recursos da natureza, parametrizado através do seu coeficiente de depredação (φd). O modelo criado permite: configurar a dinâmica estrutural desses sistemas, estimar-lhes os respectivos níveis de dependência aos recursos, bem como o tempo e a área necessários à obtenção de equivalentes custos de oportunidade aos processos de produção agrícola, e, por fim, identificar fatores limitantes à transição agrária no Município. Esses parâmetros ecológicos/econômicos, pioneiramente definidos, podem ser considerados como operacionalizadores para o planejamento de um desenvolvimento agrário sustentável.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Este artigo trata da relação sociedade-ambiente. Busca-se, por meio da Teoria de Sistemas, estabelecer um referencial que permita o entendimento dessa relação e que possibilite o acesso operacional às suas dinâmicas. A esse arcabouço teórico é associada uma proposta metodológica que se estrutura em torno da contabilização dos fluxos materiais componentes dos processos econômicos. Desse método, o Material Flow Analysis (MFA), foi aprofundado o conceito de Metabolismo Econômico-Ambiental (MEA), por meio do qual é possível quantificar toda a matéria e energia demandada por uma economia. A análise da Demanda Material Total (DMT) possibilita o conhecimento da eficiência ecológica de qualquer processo econômico e a produção de indicadores para avaliar os impactos ambientais das atividades antrópicas. Do estudo resultou um detalhamento metodológico próprio que foi aplicado para medir a DMT do Brasil para comparações com a dos EUA, Alemanha, Japão e Holanda. Os resultados demonstraram que a metodologia é capaz de trazer à tona aspectos ecologicamente relevantes da economia, mediante os quais é possível constatar que os sistemas econômicos são configurados por lógicas crescentemente insustentáveis em relação ao ambiente.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Este trabalho tem como objetivo analisar o conhecimento das comunidades tradicionais no manejo dos recursos naturais através de sua atividade produtiva, a pesca, na abordagem da Eficiência reprodutiva e na noção de Trajetórias Tecnológicas, e com isso valorizar o saber local atrelado à territorialidade da sua constituição, como cruciais ao sucesso do manejo coletivo como base de um desenvolvimento sustentável. O saber caboclo junto às premissas da eficiência reprodutiva, possibilita um processo racional e inerente dos agentes que constroem estratégias produtivas, fundamentadas na multiespeficidade, em especial, no uso do espaço e da técnica, como principal ação mitigadora a assegurar a sustentabilidade da atividade antrópica no contexto amazônico. Por se tratar de um estudo de caráter qualitativo, foram analisados: a) a formação histórica da pesca na região do Baixo Tocantins, com enfoque no município de Mocajuba, os fundamentos naturais dos cenários espaciais vigentes na área da pesquisa e os aspectos da racionalidade e padrões produtivos e reprodutivos dos agentes econômicos. Os resultados nos revelaram que a racionalidade da eficiência reprodutiva se mostrou eficaz na análise, com o valor encontrado em h convergindo para 1, ou seja, mostra o campo de conforto que a pesca proporciona aos que dela dependem, representada no modus vivendi do ribeirinho, a refletir sua forma de interação social que mesmo no cenário capitalista, são sociedades constituídas, marcantemente, por suas bases sociais familiares entrelaçadas na construção e reconstrução do ambiente natural, a sustentar fortes relações de solidariedade e cooperação como suas marcas principais. A configuração da organização social pesqueira enfatizou o modelo bipolar de divisão, determinada por idade e pelo sexo, assentada na hierarquia doméstica e na relação da força produtiva humana. A evolução tecnológica ocorrida no Baixo Tocantins, afetou a pesca artesanal, e fundamentou novas peculiaridades na otimização do espaço de pesca. Neste sentido, as mudanças tecnológicas, mostram-se, eficientes ao reduzir o tempo de execução e evitar um retrocesso produtivo, sem desvincular do pensamento conservacionista do agente. Ficou evidenciado que a pesca realizada na área de estudo é desenvolvida de forma dinâmica nas distintas modalidades de pesca empregadas a cada ciclo sazonal anual aplicada nos diferentes microhabitats. Desta forma, concluimos neste trabalho que a consciência ecológica do homem do campo e o valor do conhecimento tradicional é de suma importância para o sucesso pesqueiro, entretanto, este saber, é muitas vezes negligenciado pelas autoridades ambientais, mas deve ser considerado e consultado para que se possam subsidiar medidas efetivas de gestão a prosperar o meio ambiente.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The most widely standard used for powdery mildew control on cucurbitaceas is the use of resistant cultivars and systemic fungicides, even though nutrition has been an option. The supply of silicon is benefic to many vegetable species, stimulating growth, yield, photosynthesis and regulation of transpiration; besides, its deposition in the epidermis avoids the invasion of fungus, bacteria and sucking insects. The aim of this experiment was to evaluate the influence of potassium silicate on powdery mildew control, development and yield of zucchini squash, cultivar Caserta. The experiment was conducted at Universidade Estadual Paulista, in greenhouse conditions and with a randomized design, divided in four replications, 11 plants per plot and five treatments: control (water), chemical treatment with fenarimol (2.4 g a.i. 100 L-1) and potassium silicate, in doses 1.5 L ha-1; 2.0 L ha-1 and 2.5 L ha-1. We evaluated the disease severity; gas exchange (net CO2 assimilation rates, transpiration, stomatal conductance and water use efficiency); growth (leaf area ratio, relative growth rate, absolute growth rate, net assimilation rate and specific leaf mass) and yield. The results showed that the foliar application of potassium silicate and fenarimol controlled powdery mildew and had no influence on plant growth. Therefore, the potassium silicate may be used as alternative for control of fungal pathogens and reduced application of chemical products, which provides a greater environmental sustainability. However, it is necessary to be careful with high doses because it was observed that 2.5 L h-1 was harmful to fruit production and gas exchange, despite being effective in controlling powdery mildew. According to this study it is recommended using 2.0 L ha-1 for control of powdery mildew to zucchini squash, and can replace the use of fenarimol, without affecting productivity and development of plants.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Corn is the crop most used for making silage. The efficiency of the process should also be evaluated by cost per kg of dry matter harvested (kgDM). The objective of this study was to evaluate energy consumption in the harvest of corn hybrids for silage depending on the texture of the hybrid, four and three harvest maturities of particle sizes - Tp was used a tractor Massey Ferguson MF 610 model 86 cv. Cutting and harvesting the forage harvester is used model JF92 Z10. To obtain data on fuel consumption (CC) and time spent for each plot, we used a flow meter, installed near the fuel filter of the tractor. The experimental design was completely randomized in a split plot. The interaction between factors triple stage hybrid * Harvest * Tp. The velocity and displacement of the tractor were different for the maturities for hybrid hard texture. The CC schedule for hybrid dent increased harvest maturity earlier and at lower Tp. Consumption was lower by kgDM later maturity, hard texture and bite respectively. The theoretical power was higher in earlier maturity and yield were higher for hybrid hard texture in the most advanced. The CC was lower in late maturity and the hybrid hard texture can be used for silage in relation to the Cc and income in later maturity in higher Tp.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The purpose of this project is to verify whether anaerobic reactors applied to sewage treatment are energetically self-sufficient. This evaluation can be made by balancing the methane produced through the anaerobic transformation stages (hydrolysis, acidogenesis, acetogenesis and methanogenesis) and the reactor energy consumption requirements. The original project included methanogenic activity tests, which could not be performed due to setbacks in the installation of an analytical instrument. Scientific articles about bench- and full-scale anaerobic reactors were investigated instead. An average substrate-to-methane conversion efficiency of 58,2±18,6% was found for the bench-scale reactors and higher efficiencies (89,2%) were found for the cases which had higher Organic Loading Rates (OLRs) values. The average energy output was 0,013 kWh/Lsewage, value unable to meet the energy needs for the reactor operation, considering equipments normally used such as temperature controller. This balance can become positive if few hypotheses are made, for example (i) to eliminate the use of temperature controller (ii) to alter the operation pattern from continuous to intermittent. Based on energy balance assessment of eight bench-scale reactors, it was observed that the implementation of a system for biogas utilization is not energetically feasible. However, interesting results were found for a full-scale sewage treatment plant, ETE Ouro Verde – Foz do Iguaçu, PR, Brazil. Even though its substrate-tomethane conversion efficiency was about 10% only, the energy balance was quite positive, with energy consumption of 68 kWh/month and energy production of 660 kWh/month. This analysis leads us to conclude that energy recovery from full-scale sewage treatment plants should be practiced by other plants

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This project aimed to analyze the feasibility of the methane yield associated to the anaerobic digestion of brewery residues, checking whether the energetic balance of the system is favorable. The methane yield efficiency was calculated for the parameters of two papers that treated solids with a particle-size <1mm. Theses solids are not degraded in conventional treatment systems. Calculations were based in the reactions of anaerobic degradation of the macromolecules that compose brewery residues, considering the theoretical production and the effective production of methane. The results were 50.44% and 52.86%. Regarding to the energy balance of the anaerobic treatment, we noted the high influence of the selection and operating regime of electrical equipment over the potential energy. The best situation, in which the energetic self-sufficiency was reached, was observed when using the mixer under an intermittent regime (1min/h), without employing the heating recirculator, for the maximum organic loading of 4.0 gVS/L.day (days 248-258). In this case, the system would generate an amount of energy equal to 0.0356 kWh/day, able to overcome the energy required by the equipment in about 6.5 times. Moreover, we also noted the interference of the application of different solid loadings in the reactors, once the application of the higher organic load generated 5 times more energy than the application of the smaller one