Measurement of the relative rate of prompt χ c0, χ c1 and χ c2 production at TeV

Prompt production of charmonium χ c0, χ c1 and χ c2 mesons is studied using proton-proton collisions at the LHC at a centre-of-mass energy of TeX TeV. The χ c mesons are identified through their decay to J/ψγ, with J/ψ → μ + μ − using photons that converted in the detector. A data sample, corresponding to an integrated luminosity of 1.0 fb−1 collected by the LHCb detector, is used to measure the relative prompt production rate of χ c1 and χ c2 in the rapidity range 2.0 < y < 4.5 as a function of the J/ψ transverse momentum from 3 to 20 GeV/c. First evidence for χ c0 meson production at a high-energy hadron collider is also presented.

Comparing assays for the measurement of AhR ligand activity

In this thesis (TFG) the results of the comparison of three assays for the measurement of AhR ligand activity are exposed. This study was part of a collaborative project aiming at the characterization of the AhR signaling activities of known naturally occurring compounds to explore the potential of using non-toxic compounds to treat inflammatory diseases via oral administration. The first goal of this project was to find an assay able to measure AhR-activity, so the comparison of different assays has been done in order to find the most convenient one according to the efficiency, sensitivity and precision. Moreover, other elements with operational nature such as price, toxicity of components or ease of use has been considered. From the use of compounds known from the literature to be AhR ligands, three assays have been tested: (1) P450-GloTM CYP1A2 Induction/Inhibition assay, (2) quantitative Polymerase Chain Reaction (qPCR) and (3) DR. CALUX® Bioassay. Moreover, a different experiment using the last assay was performed for the study in vivo of the transport of the compounds tested. The results of the TFG suggested the DR. CALUX® Bioassay as the most promising assay to be used for the screening of samples as AhR-ligands because it is quicker, easier to handle and less expensive than qPCR and more reproducible than the CYP1A2 Induction/Inhibition assay. Moreover, the use of this assay allowed having a first idea of which compounds are uptaken by the epithelial barrier and in with direction the transport happens.

The use of cost per life year gained as a measurement of cost-effectiveness in Spain: a systematic review of recent publications

The objective of this study was to evaluate the methodological characteristics of cost-effectiveness evaluations carried out in Spain, since 1990, which include LYG as an outcome to measure the incremental cost-effectiveness ratio. METHODS: A systematic review of published studies was conducted describing their characteristics and methodological quality. We analyse the cost per LYG results in relation with a commonly accepted Spanish cost-effectiveness threshold and the possible relation with the cost per quality adjusted life year (QALY) gained when they both were calculated for the same economic evaluation. RESULTS: A total of 62 economic evaluations fulfilled the selection criteria, 24 of them including the cost per QALY gained result as well. The methodological quality of the studies was good (55%) or very good (26%). A total of 124 cost per LYG results were obtained with a mean ratio of 49,529 and a median of 11,490 (standard deviation of 183,080). Since 2003, a commonly accepted Spanish threshold has been referenced by 66% of studies. A significant correlation was found between the cost per LYG and cost per QALY gained results (0.89 Spearman-Rho, 0.91 Pearson). CONCLUSIONS: There is an increasing interest for economic health care evaluations in Spain, and the quality of the studies is also improving. Although a commonly accepted threshold exists, further information is needed for decision-making as well as to identify the relationship between the costs per LYG and per QALY gained.

The role of ultrasonography in the measurement of subcutaneous and visceral fat and its correlation with hepatic steatosis

Objective To evaluate the sonographic measurement of subcutaneous and visceral fat in correlation with the grade of hepatic steatosis. Materials and Methods In the period from October 2012 to January 2013, 365 patients were evaluated. The subcutaneous and visceral fat thicknesses were measured with a convex, 3–4 MHz transducer transversely placed 1 cm above the umbilical scar. The distance between the internal aspect of the abdominal rectus muscle and the posterior aortic wall in the abdominal midline was considered for measurement of the visceral fat. Increased liver echogenicity, blurring of vascular margins and increased acoustic attenuation were the parameters considered in the quantification of hepatic steatosis. Results Steatosis was found in 38% of the study sample. In the detection of moderate to severe steatosis, the area under the ROC curve was 0.96 for women and 0.99 for men, indicating cut-off values for visceral fat thickness of 9 cm and 10 cm, respectively. Conclusion The present study evidenced the correlation between steatosis and visceral fat thickness and suggested values for visceral fat thickness to allow the differentiation of normality from risk for steatohepatitis.

Postmating-prezygotic isolation between two allopatric populations of Drosophila montana: fertilisation success differs under sperm competition

Postmating but prezygotic (PMPZ) interactions are increasingly recognized as a potentially important early-stage barrier in the evolution of reproductive isolation. A recent study described a potential example between populations of the same species: single matings between Drosophila montana populations resulted in differential fertilisation success because of the inability of sperm from one population (Vancouver) to penetrate the eggs of the other population (Colorado). As the natural mating system of D. montana is polyandrous (females remate rapidly), we set up double matings of all possible crosses between the same populations to test whether competitive effects between ejaculates influence this PMPZ isolation. We measured premating isolation in no-choice tests, female fecundity, fertility and egg-to-adult viability after single and double matings as well as second-male paternity success (P-2). Surprisingly, we found no PMPZ reproductive isolation between the two populations under a competitive setting, indicating no difficulty of sperm from Vancouver males to fertilize Colorado eggs after double matings. While there were subtle differences in how P-2 changed over time, suggesting that Vancouver males' sperm are somewhat less competitive in a first-male role within Colorado females, these effects did not translate into differences in overall P-2. Fertilisation success can thus differ dramatically between competitive and noncompetitive conditions, perhaps because the males that mate second produce higher quality ejaculates in response to sperm competition. We suggest that unlike in more divergent species comparisons, where sperm competition typically increases reproductive isolation, ejaculate tailoring can reduce the potential for PMPZ isolation when recently diverged populations interbreed.

Trends in adult body-mass index in 200 countries from 1975 to 2014: a pooled analysis of 1698 population-based measurement studies with 19·2 million participants.

BACKGROUND: Underweight and severe and morbid obesity are associated with highly elevated risks of adverse health outcomes. We estimated trends in mean body-mass index (BMI), which characterises its population distribution, and in the prevalences of a complete set of BMI categories for adults in all countries. METHODS: We analysed, with use of a consistent protocol, population-based studies that had measured height and weight in adults aged 18 years and older. We applied a Bayesian hierarchical model to these data to estimate trends from 1975 to 2014 in mean BMI and in the prevalences of BMI categories (<18·5 kg/m(2) [underweight], 18·5 kg/m(2) to <20 kg/m(2), 20 kg/m(2) to <25 kg/m(2), 25 kg/m(2) to <30 kg/m(2), 30 kg/m(2) to <35 kg/m(2), 35 kg/m(2) to <40 kg/m(2), ≥40 kg/m(2) [morbid obesity]), by sex in 200 countries and territories, organised in 21 regions. We calculated the posterior probability of meeting the target of halting by 2025 the rise in obesity at its 2010 levels, if post-2000 trends continue. FINDINGS: We used 1698 population-based data sources, with more than 19·2 million adult participants (9·9 million men and 9·3 million women) in 186 of 200 countries for which estimates were made. Global age-standardised mean BMI increased from 21·7 kg/m(2) (95% credible interval 21·3-22·1) in 1975 to 24·2 kg/m(2) (24·0-24·4) in 2014 in men, and from 22·1 kg/m(2) (21·7-22·5) in 1975 to 24·4 kg/m(2) (24·2-24·6) in 2014 in women. Regional mean BMIs in 2014 for men ranged from 21·4 kg/m(2) in central Africa and south Asia to 29·2 kg/m(2) (28·6-29·8) in Polynesia and Micronesia; for women the range was from 21·8 kg/m(2) (21·4-22·3) in south Asia to 32·2 kg/m(2) (31·5-32·8) in Polynesia and Micronesia. Over these four decades, age-standardised global prevalence of underweight decreased from 13·8% (10·5-17·4) to 8·8% (7·4-10·3) in men and from 14·6% (11·6-17·9) to 9·7% (8·3-11·1) in women. South Asia had the highest prevalence of underweight in 2014, 23·4% (17·8-29·2) in men and 24·0% (18·9-29·3) in women. Age-standardised prevalence of obesity increased from 3·2% (2·4-4·1) in 1975 to 10·8% (9·7-12·0) in 2014 in men, and from 6·4% (5·1-7·8) to 14·9% (13·6-16·1) in women. 2·3% (2·0-2·7) of the world's men and 5·0% (4·4-5·6) of women were severely obese (ie, have BMI ≥35 kg/m(2)). Globally, prevalence of morbid obesity was 0·64% (0·46-0·86) in men and 1·6% (1·3-1·9) in women. INTERPRETATION: If post-2000 trends continue, the probability of meeting the global obesity target is virtually zero. Rather, if these trends continue, by 2025, global obesity prevalence will reach 18% in men and surpass 21% in women; severe obesity will surpass 6% in men and 9% in women. Nonetheless, underweight remains prevalent in the world's poorest regions, especially in south Asia. FUNDING: Wellcome Trust, Grand Challenges Canada.

A nonparametric method for the measurement of size diversity with emphasis on data standardization

The most suitable method for estimation of size diversity is investigated. Size diversity is computed on the basis of the Shannon diversity expression adapted for continuous variables, such as size. It takes the form of an integral involving the probability density function (pdf) of the size of the individuals. Different approaches for the estimation of pdf are compared: parametric methods, assuming that data come from a determinate family of pdfs, and nonparametric methods, where pdf is estimated using some kind of local evaluation. Exponential, generalized Pareto, normal, and log-normal distributions have been used to generate simulated samples using estimated parameters from real samples. Nonparametric methods include discrete computation of data histograms based on size intervals and continuous kernel estimation of pdf. Kernel approach gives accurate estimation of size diversity, whilst parametric methods are only useful when the reference distribution have similar shape to the real one. Special attention is given for data standardization. The division of data by the sample geometric mean is proposedas the most suitable standardization method, which shows additional advantages: the same size diversity value is obtained when using original size or log-transformed data, and size measurements with different dimensionality (longitudes, areas, volumes or biomasses) may be immediately compared with the simple addition of ln k where kis the dimensionality (1, 2, or 3, respectively). Thus, the kernel estimation, after data standardization by division of sample geometric mean, arises as the most reliable and generalizable method of size diversity evaluation

Liiketoimintastrategisten vaatimusten syntyminen ja niiden toteutumisen arviointi keskisuurten yritysten toiminnanohjausjärjestelmähankkeissa. Tapaustutkimus kolmesta teollisuusyrityksestä ja aineistolähtöinen teoria

Tietojärjestelmien strateginen kehittäminen on ollut niin liike-elämän kiinnostuksen kuin akateemisen tutkimuksenkin kohteena jo pitkään. Aihe on edelleen ajankohtainen, eikä ajankohtaisuus osoita laantumisen merkkejä. Valtaosa tutkimuksesta on kohdistunut suuryrityksiin ja jonkin verran pk-yrityksiin yhtenä ryhmänä. Tutkimus on kohdistunut aiheeseen tarkastelemalla onko tietojärjestelmien ja liiketoimintastrategian välillä yhteyttä, ja jos, onko sillä merkitystä yrityksen menestykselle. Tämän tutkimuksen tavoitteena oli pureutua syvemmälle siihen tapaan, jolla yritys kytkee liiketoimintastrategiansa tietojärjestelmähankintaan. Kohdetietojärjestelmäksi tutkimuksessa valittiin toiminnanohjausjärjestelmät ja yrityskooksi keskisuuret yritykset. Toiminnanohjausjärjestelmän valintaa voidaan perustella sen kattavuudella yrityksen toiminnassa eri sidosryhmien suunnasta katsottaessa. Keskisuuret yritykset valittiin osittain sen vuoksi, koska niistä ei ole paljoakaan omaa tutkimusta, osittain sen vuoksi, että niiden luonne kehityspolun epäjatkumokohdassa haluttiin nostaa esille. Tutkimuksen empiirinen osa pohjautuu kolmeen tutkimustapaukseen, kolmen keskisuuren yrityksen toiminnanohjaushankkeeseen. Tapausyritysten liiketoiminta- ja ITjohtoa haastateltiin, ja lisäksi käytettiin kaikkea saataville ollutta kirjallista arkistoaineistoa. Tutkimuksen päämenetelmä oli Grounded Theory (GT). Tutkimustavassa ei, poiketen useista muista laadullisista tutkimustavoista, ole ennalta määrättyä viitekehystä, vaan tutkimus lähtee liikkeelle ns. puhtaalta pöydältä ilman esioletuksia luoden tutkimusprosessin kuluessa uutta teoriaa. Tutkimustavan etuna voidaan pitää ennakkoluulottomuutta. Aikaisemman tutkimuksen rooli tässä tutkimuksessa oli ensinnäkin kartoittaa tutkimusaluetta ja olla johdantona tutkimukselle, toisaalta tuloksia vertailtiin aikaisempaan tutkimukseen. Tutkimusaineisto analysoitiin tarkasti. Ensin aineisto käytiin läpi koodaamalla se aineistosta esille nousseiden käsitteiden alle. Seuraavaksi saatu tulos luokiteltiin aineistosta nousseisiin luokkiin sekä muodostettiin käsitteiden ja luokkien väliset yhteydet. Lopuksi muodostumassa oleva teoria konkretisoitiin 18 hypoteesin ja hypoteesit yhdistävän mallin avulla. Tutkimuksessa saatiin uutta tietoa siitä, miten vaatimusprosessi etenee ja miten keskisuuren yrityksen ominaispiirteet vaikuttavat vaatimusprosessiin. Lisäksi saatiin uutta tietoa siitä, mitkä ovat kriittisiä menestystekijöitä keskisuuren yrityksen toiminnanohjaushankkeessa. Keskisuuretyritykset näyttävät tämän tutkimuksen aineiston perusteella osaavan asettaa vaatimuksia toiminnanohjausjärjestelmälle liiketoimintastrategian, prosessikuvausten ja toiminnanohjausjärjestelmien tarjoamien mahdollisuuksien suunnista. Vaatimusten toteutumisenarviointi on keskisuurilla yrityksillä epäsystemaattista, kuten aikaisemmassa tutkimuksessa on todettu olevan myös suurilla yrityksillä. Resurssivaje vaikeuttaa toiminnanohjausjärjestelmän liiketoimintastrategisten vaatimusten toteutumista. Tutkimusaineiston perusteella voidaan päätellä, että keskisuurissa yrityksissä – huolimatta siitä, että niissä on olemassa prosessikuvaukset – ei ole varsinaista prosessiajattelua tai prosessijohtamista. Keskisuuret yritykset eivät tämän tutkimuksen aineiston perusteella näytä muodostavan poikkeusta, vaan mittariston käyttö on epäkypsää, eikä mittaristoa pystytä hyödyntämään tietojärjestelmähankkeen tukena. Tulosten pohjalta voidaan arvioida, että strategisen johtamisen komponentit ovat keskisuuressa yrityksessä toisistaan irrallisia. Vaikka toiminnanohjaushankkeen vaatimuksia asetettaessa liiketoimintastrategia on vahvasti mukana, jää vaatimuksenasettelu karkealle tasolle, eikä konkretisoidu prosesseihin ja mittarointiin. Sen seurauksena toiminnanohjausjärjestelmästä ei saada kaikkea sitä hyötyä ja tukea liiketoimintastrategialle, mikä olisi mahdollista. Tutkimuksessa tuli myös esille resurssi- ja osaamispuutteen haittavaikutuksia keskisuurten yritysten toiminnanohjaushankkeiden vaatimusprosessissa. Puutteet yhdistettynä hajallaan oleviin strategisen johtamisen komponentteihin muodostavat yhdessä vaikean lähtökohdan strategiselle toiminnanohjaushankkeelle.

Asiantuntijaorganisaation suorituskyvyn mittaus

Aineettoman pääoman katsotaan olevan merkittävä tekijä erityisesti yrityksen tulevaisuuden menestyksen kannalta. Johtamalla ja kehittämällä aineettomia resursseja varmistetaan se, että yritys menestyy ja säilyy elinvoimaisena myös tulevaisuudessa. Aineettoman pääoman johtaminen ja järjestelmällinen kehittäminen ja parantaminen edellyttävät ajantasaista ja käyttökelpoista tietoa yrityksen aineettomista resursseista. Suorituskyvyn mittausjärjestelmä voi toimia tällaisen tiedon lähteenä. Tämän tutkimuksen tavoitteena oli asiantuntijaorganisaation aineettoman pääoman suorituskyvyn mittaamisen viitekehyksen luominen ja sen soveltaminen yhteen case-organisaatioon. Suorituskykymittaristona tässä tutkimuksessa käytettiin tasapainotettua mittaristoa. Tutkimuksen tutkimusote oli toiminta-analyyttinen ja menetelmä kvalitatiivinen. Tutkimuksen tuloksia arvioitaessa huomataan, että aineettoman pääoman mittaaminen samalla mittaristolla aineellisen pääoman kanssa on haasteellista. Aineelliset tekijät korostuvat helposti aineettomien kustannuksella ja tämä voi aiheuttaa mittariston painopisteen kallistumisen aineellisen pääoman puolelle. Tapauskohtaista lisätarkastelua tarvitaan tulosten hyödynnettävyyttä arvioitaessa, mikä johtuu tutkimusotteesta ja menetelmästä. Tärkein yksittäinen tekijä aineettomaan pääoman suorituskyvyn mittauksessa on se, että organisaatio näkee aineettoman pääoman oman toimintansa kannalta kriittisenä tekijänä, joka on organisaation menestyksen kannalta elintärkeä ja jonka kehitykseen halutaan panostaa. Tämän havainnon jälkeen mittaristomallin valinta tehdään organisaation ja sen toimintojen perusteella.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.

Shaping urban traffic patterns through congestion charging : What factors drive success or failure?

Congestion costs are emerging as one of the most important challenges faced by metropolitan planners and transport authorities in first world economies. In US these costs were as high as 78 million dollars in 2005 and are growing due to fast increases in travel delays. In order to solve the current and severe levels of congestion the US department of transportation have recently started a program to initiate congestion pricing in five metropolitan areas. In this context it is important to determine those factors helping its implementation and success, but also the problems or difficulties associated with charging projects. In this article we analyze worldwide experiences with urban road charging in order to extract interesting and helpful lessons for policy makers engaged in congestion pricing projects and for those interested in the introduction of traffic management tools to regulate the entrance to big cities.

Työtyytyväisyysmittaus johtamisen välineenä case: pk konepaja

Tutkimuksen tavoite on kuvata ja ymmartaa, miten työtyytyväisyysmittausta voidaan käyttää johtamisessa. Työtyytyväisyys on tutkimusten mukaan tärkeä tekijä yrityksen tuottavuudelle. Työtyytyväisyys voidaan ymmärtää miellyttäväksi tai positiiviseksi tunnetilaksi, joka johtuu yksilon tyosta tai tyokokemuksista. Tutkimuksen keskeinen ilmiö on johtaminen. Johtaja tarvitsee tietoa siitä, miten saada menestystekijät yrityksen käyttöön ja miten poistaa mahdolliset työnteon esteet. Tutkimustulosten tulkinnan mukaan työtyytyväisyysmittaus on tehokas ja prosessinmuotoon saatettuna yksinkertainen tapa kerata työpaikalta tietoa johtamisen käyttöön. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Case yritys oli pk konepaja. Aineiston keräämiseksi käytettiin teemahaastatteluja.