The Sphene-Centered Ocellar Texture: An Effect of Grain-Supported Flow and Melt Migration in a Hyperdense Magma Mush

The sphene-centered ocellar texture consists of leucocratic ocelli with sphene (titanite) crystals at the center, enclosed in a biotite-rich matrix. This texture has been recognized worldwide in hybrid intermediate rocks. On the basis of structural, petrological, and geochronological data from selected outcrops of the Variscan Ribadelago pluton (NW Iberian Massif), we propose that the ocelli were formed by migration and accumulation of a residual melt through a plagioclase- and biotite-dominated crystalline framework. At the late stage of crystallization, the magma acted as a hyperdense suspension and reacted to the pressure gradient caused by the regional stress field, entering the domain of grain-supported flow. Microstructures reveal that aligned crystal domains arose in the crystal framework from the shearing and compaction of the crystal mush and behaved as magmatic microshears. Relative displacement of adjacent crystal clusters along these microshears corresponded to the onset of Reynolds dilatancy that generated an expansion of the crystal mush, involving melt migration and pore aperture. The mineralogy of the ocelli, dominated by andesine and sphene, represents the composition of the migrating melt. The chemistry of this late, Ti-rich melt stems from the incongruent melting of biotite. Magmatic sphene from the ocelli yields a U-Pb age of 317 +/- 1 Ma, which represents the final crystallization of the hybridized magmatic system. Moreover, this texture offers an opportunity to better understand the rheological behavior of highly crystallized magmas.

Controls of heavy minerals and grain size in a holocene regressive barrier (Ilha Comprida, southeastern Brazil)

Ilha Comprida is a regressive barrier island located in southeastern Brazil that was formed essentially by Quaternary sandy sediments. Ilha Comprida sediments were analyzed to assess heavy mineral indices and grain size variables. The spatial variation of heavy minerals and grain size was interpreted in terms of the present barrier dynamics and the barrier`s evolution since the Middle Holocene. These analyses allowed for the identification of the main factors and processes that control the variation of heavy minerals and grain size on the barrier. Rutile and zircon (RZi) and tourmaline and hornblende (THi) are significantly sensitive to provenance and exhibit the contributions of the Ribeira de Iguape River sediments, which reach the coast next to the northeastern end of Ilha Comprida. In addition to the influence of provenance, TZi responds mainly to hydraulic sorting processes. This agrees with a sediment transport pattern characterized by a divergence of two resultant net alongshore drifts southwest of the barrier. The sediments from the Ribeira de Iguape River reach the barrier directly through the river mouth and indirectly after temporary storage in the inner shelf. The combination of grain size and heavy mineral analyses is a reliable method for determining sediment transport patterns and provenance. (C) 2010 Elsevier Ltd. All rights reserved.

Grain size and heavy minerals of the Late Quaternary eolian sediments from the Imbituba-Jaguaruna coast, Southern Brazil: Depositional controls linked to relative sea-level changes

The stratigraphic subdivision and correlation of dune deposits is difficult, especially when age datings are not available. A better understanding of the controls on texture and composition of eolian sands is necessary to interpret ancient eolian sediments. The Imbituba-Jaguaruna coastal zone (Southern Brazil, 28 degrees-29 degrees S) stands out due to its four well-preserved Late Pleistocene (eolian generation 1) to Holocene eolian units (eolian generations 2, 3, and 4). In this study, we evaluate the grain-size and heavy-mineral characteristics of the Imbituba-Jaguartma eolian units through statistical analysis of hundreds of sediment samples. Grain-size parameters and heavy-mineral content allow us to distinguish the Pleistocene from the Holocene units. The grain size displays a pattern of fining and better sorting from generation 1 (older) to 4 (younger), whereas the content of mechanically stable (dense and hard) heavy minerals decreases from eolian generation 1 to 4. The variation in grain size and heavy-mineral content records shifts in the origin and balance (input versus output) of eolian sediment supply attributable mainly to relative sea-level changes. Dunefields submitted to relative sea-level lowstand conditions (eolian generation 1) are characterized by lower accumulation rates and intense post-depositional dissection by fluvial incision. Low accumulation rates favor deflation in the eolian system, which promotes concentration of denser and stable heavy minerals (increase of ZTR index) as well as coarsening of eolian sands. Dissection involves the selective removal of finer sediments and less dense heavy minerals to the coastal source area. Under a high rate of relative sea-level rise and transgression (eolian generation 2), coastal erosion prevents deflation through high input of sediments to the coastal eolian source. This condition favors dunefield growth. Coastal erosion feeds sand from local sources to the eolian system. including sands from previous dunefields (eolian generation 1) and from drowned incised valleys. Therefore, dunefields corresponding to transgressive phases inherit the grain-size and heavy-mineral characteristics of previous dunefields, leading to selective enrichment of finer sands and lighter minerals. Eolian generations 3 and 4 developed during a regressive-progradational phase (Holocene relative sea level highstand). The high rate of sediment supply during the highstand phase prevents deflation. The lack of coastal erosion favors sediment supply from distal sources (fluvial sediments rich in unstable heavy minerals). Thus, dunefields of transgressive and highstand systems tracts may be distinguished from dunefields of the lowstand systems tract through high rates of accumulation (low deflation) in the former. The sediment source of the transgressive dunefields (high input of previously deposited coastal sands) differs from that of the highstand dunefields (high input of fluvial distal sands). Based on this case study, we propose a general framework for the relation between relative sea level, sediment supply and the texture and mineralogy of eolian sediments deposited in siliciclastic wet coastal zones similar to the Imbituba-Jaguaruna coast (C) 2009 Elsevier B.V. All rights reserved.

DIAGNOSTIC TECHNIQUES OF LOCAL INFLUENCE IN SPATIAL ANALYSIS OF SOYBEAN YIELD

Modeling of spatial dependence structure, concerning geoestatistics approach, is an indispensable tool for fixing parameters that define this structure, applied on interpolation of values in places that are not sampled, by kriging techniques. However, the estimation of parameters can be greatly affected by the presence of atypical observations on sampled data. Thus, this trial aimed at using diagnostics techniques of local influence in spatial linear Gaussians models, applied at geoestatistics in order to evaluate sensitivity of maximum likelihood estimators and restrict maximum likelihood to small perturbations in these data. So, studies with simulated and experimental data were performed. Those results, obtained from the study of real data, allowed us to conclude that the presence of atypical values among the sampled data can have a strong influence on thematic maps, changing, therefore, the spatial dependence. The application of diagnostics techniques of local influence should be part of any geoestatistic analysis, ensuring that the information from thematic maps has better quality and can be used with greater security by farmers.

Stimulation of Acidic Reduction of Nitrite to Nitric Oxide by Soybean Phenolics: Possible Relevance to Gastrointestinal Host Defense

This study aimed to evaluate the potential of soybean-promoted acidic nitrite reduction and to correlate this activity with the content of phenolics and with the bactericidal activity against Escherichia coli O157:H7. Extracts of embrionary axes and cotyledons enriched in phenolics increased (center dot)NO formation at acidic pH at values that were 7.1 and 4.5 times higher, respectively, when compared to the reduction of the nonenriched extracts. Among the various phenolics accumulated in the soybean extracts, five stimulated nitrite reduction in the following decreasing order of potency: epicatechin gallate, chlorogenic acid, caffeic acid, galic acid and p-coumaric acid. Extracts of embrionary axes presented higher contents of epicatechin gallate and caffeic acid, compared to that of cotyledons, indicating a positive correlation between activity of the extracts and content of phenolics with regard to nitrite reducing activity. Soybean extracts enriched in phenolics interacted synergistically with acidified nitrite to prevent E. coli O157:H7 growth. The results suggest that soybean phenolics may interfere with the metabolism of (center dot)NO in an acidic environment by accelerating the reduction of nitrite, with a potential antimicrobial effect in the stomach.

Catalytic ethanolysis of soybean oil with immobilized lipase from Candida antarctica and (1)H NMR and GC quantification of the ethyl esters (biodiesel) produced

The catalytic ethanolysis of soybean oil with commercial immobilized lipase type B from Candida antarctica to yield ethyl esters (biodiesel) has been investigated. Transesterification was monitored with respect to the following parameters: quantity of biocatalyst, reaction time, amount of water added and turnover of lipase. The highest yields of biodiesel (87% by (1)H NMR; 82.9% by GC) were obtained after a reaction time of 24 h at 32 degrees C in the presence of lipase equivalent to 5.0% (w/w) of the amount of soybean oil present. The production of ethyl esters by enzymatic ethanolysis was not influenced by the addition of water up to 4.0% (v/v) of the alcohol indicating that it is possible to use hydrated ethanol in the production of biodiesel catalyzed by lipase. The immobilized enzyme showed high stability under moderate reaction conditions and retained its activity after five production cycles. The (1)H NMR methodology elaborated for the quantification of biodiesel in unpurified reaction mixtures showed good correlations between the signal areas of peaks associated with the alpha-methylene groups of the ethyl esters and those of the triacyl-glycerides in residual soybean oil. Monoacylglycerides, diacylglycerides and triglycerides could also be detected and quantified in the crude biodiesel using (1)H NMR spectroscopic and GC-FID chromatographic methods. The biodiesel production by enzymatic catalysis was promising. In this case, was produced a low concentration of glycerol (0.74%) and easily removed by water extraction. (C) 2010 Elsevier B.V. All rights reserved.

Structure and Applications of a Rhamnolipid Surfactant Produced in Soybean Oil Waste

Soybean oil soapstock was utilized as an alternative carbon source for the production of rhamnolipids by Pseudomonas aeruginosa LBI strain. The chemical composition and properties of the rhamnolipid mixture obtained were determined to define its potential applications. The chemical characterization of the rhamnolipid has revealed the presence of ten different homologues. The monorhamnolipid RhaC(10)C(10) and the dirhamnolipid Rha(2)C(10)C(10) were the main components of the mixture that showed predominance of 44% and 29%, respectively, after 144-h of cultivation. The biosurfactant was able to form stable emulsions with several hydrocarbons and showed excellent emulsification for soybean oil and chicken fat (100%). The rhamnolipid removed 67% of crude oil present in sand samples and presented antimicrobial activity against Bacillus cereus and Mucor miehei at 64 mu g/mL and inhibition of Neurospora crassa, Staphylococcus aureus, and Micrococcus luteus at 256 mu g/mL. The results demonstrated that the rhamnolipid produced in soybean oil soapstock can be useful in environmental and food industry applications.

A dislocation based theory for the deformation hardening behavior of DP steels : Impact of martensite content and ferrite grain size

A dislocation model, accurately describing the uniaxial plastic stress-strain behavior of dual phase (DP) steels, is proposed and the impact of martensite content and ferrite grain size in four commercially produced DP steels is analyzed. It is assumed that the plastic deformation process is localized to the ferrite. This is taken into account by introducing a non-homogeneity parameter, f(e), that specifies the volume fraction of ferrite taking active part in the plastic deformation process. It is found that the larger the martensite content the smaller the initial volume fraction of active ferrite which yields a higher initial deformation hardening rate. This explains the high energy absorbing capacity of DP steels with high volume fractions of martensite. Further, the effect of ferrite grain size strengthening in DP steels is important. The flow stress grain size sensitivity for DP steels is observed to be 7 times larger than that for single phase ferrite.

Characterization of AFN1, a Gene Associated with Cereal Grain Germination

The AFN1 gene is transiently expressed in germinating oat grains. As AFN1 is not expressed in dormant oat grains during imbibition, we hypothesize that AFN1 may be involved in stimulating the germination process. Sequence analysis of an AFN1 cDNA clone indicates that the AFN1 polypeptide is similar to a previously identified abscisic acid (ABA) glucosyl transferase. This suggests that AFN1 may be acting to glucosylate ABA, thereby inactivating it. As the hormone ABA is known to inhibit germination, ABA glucosylation/inactivation could lead to germination in grains expressing AFN1. To test this hypothesis, we have constructed an expression plasmid that encodes an MBP::AFN1 (maltose binding protein) fusion protein. E. coli cells carrying the expression plasmid were found to produce the MBP::AFN1 fusion protein as a substantial fraction of total protein. We are currently in the process of purifying the MBP::AFN1 fusion protein by affinity chromatography, so that it can be assayed for ABA glucosyl transferase activity. We also wish to test the effect of AFN1 gene expression during grain imbibition on the germination behavior of the grains. To this end, we have constructed plasmids for the overexpression and RNAi-based suppression of AFN1 in transgenic plants. These plasmids have been introduced into oat cells by particle bombardment and we are in the process of regenerating transgenic plants for study.

Characterization of the Wheat Grain PKABA1-Interacting Protein TaWD40

Abscisic acid (ABA)-mediated gene expression is a critical component of plant responses to this important hormone, which affects plant growth, development, and responses to environmental stresses. Plant responses to ABA are mediated by a number of factors including PKABA1, an ABA induced protein kinase involved in ABA-suppressed gene expression in cereal grains, and TaWD40, which has previously been shown to physically interact with PKABA1. A full-length 1.9 kb TaWD40 cDNA, CK210682, was sequenced as part of this project. Based on the deduced protein sequence, it is thought that TaWD40 may belong to the family of E3 ubiquitin ligases, possibly targeting PKABA1 for destruction. Construction of expression plasmids for overproduction of the TaWD40 polypeptide in E. coli is currently underway. The TaWD40 cDNA has been successfully amplified from the source plasmid and inserted into an intermediate plasmid, pCR2.1. The TaWD40 cDNA is currently being cloned from the pCR2.1 intermediate plasmid into two different expression vectors, pRSET-A and pMAL-c2x, for future protein production and purification.

Competition of sicklepod, cassia obtusifolia l., densities on soybean, glycine max (l.) merr., at variable row distance

Competition studies with soybeans, Glycine max (L.) Merr. "Bragg." and sicklepod, Cassia obtusifolia L., were conducted at the Agricultural Research and Education Center of the University of Florida in Quincy, Florida. Two field experiments were established, one on May 22, 1975. and the other four weeks later, on June 19, 1975, to determine the competitive effects of various sicklepod densities and the influences of soybean row distances on weed dry matter, soybear plant characteristics, yield components and seed yield, and on soil nutrient content. Control, low, medium, and high sicklepod densities in the first experiment were O, 25,000, 53,000, and 77,000 p1ants/ha, respectively; while the second experiment presented control, low, medium, and high sicklepod densities of O, 36,000, 68,000, and 122,000 plants/ha, respectively. Three soybean row distance treatments were tested using a constant pattern of 90-, 60-, and 45-cm widths throughout the growing season. Three other treatments, evaluated in a variable patern, were initially seeded in 30-cm row widths. Five weeks after planting, an appropriate number of soybean rows were harvested from the 30"cm pattern to establish row distances of 90, 60, and 30-60 cm for the remainder of the season. ln the greenhouse a test was conducted to evaluate the effects af those variables on seed germination and seedling vigor for the next soybean generation. As a result of full-season sicklepod competition, soybean plants were less branched, set fewer leaves, and presented thinner stems as compared to the control. However, height of soybean plants was not affected by the presence of sicklepod. ln one of the two experiments, number of nodes decreased for soybeans under weed campetition. The yield components--number of pods; number of seeds, and seed yield per soybean plant--were all similarly reduced due to weed competition. Seeds per pod were decreased to a lesser extent. Soybean seed yields per unit area were significantly diminished by increasing levels af sicklepod ínfestation. While the control produced 3120 kg/ha, the sicklepod densities of 25,000, 53,000, and 77,000 plants/ha reduced seed yíelds 47, 65, and 73%, respectively. As soybean row distances decreased, number of branches, number of leaves, and stem diameter of soybeans decreased. However, the height of soybean plants increased with narrwing of row width. The components of seed yield--number of pods, number of seeds, and seed yield per soybean plant--diminished as row spacing was reduced. Maximum difference between row distances for these attributes was attained for soybean plants under weed-free conditions. Generally, as row width decreased, soybean seed yield per unit area increased. Specifically, soybear.s in 90-cm rows, either in constant or variable row pattern, yielded less than soybeans in 60- and 30-60-cm rows in the variable pattern. Soil contents of phosphorus, potassium, calcium, and magnesium were not affected by the various levels of sicklepod and soybean populalions. Neither the sicklepod densities nor the soybean row distances influenced seed germination and seedling vigor in the next soybean generation. Sicklepod was a strong competitor with soybeans at all density ranges investigated. Because sicklepod grows taller than soybeans during the reproductive stages of the crop, limited success can be reached by varying row spacing alone. However, this practice is considered an integral measure to complement other methods of sicklepod control. Compared to constant rows, the soybean cropping system using variable row spacings presents the choice of planting soybeans at close row spacings to provide early competition with weeds and the possibility of obtaining a forage crop after the first month of growth, without any decreases on the final seed yields.

Programa ABC: uma análise para o período de 2011 a 2014

As mudanças climáticas se tornam tema cada vez mais presente nos debates envolvendo as grandes potências do mundo. Desde seus efeitos prejudiciais à espécie humana até os planos de ação para combatê-los, o tema é debatido pelos mais importantes atores do cenário geopolítico mundial. O Programa ABC é a linha de crédito associada ao Plano ABC. Através dele os recursos são disponibilizados aos produtores rurais para investimento em tecnologias que reduzam as emissões de gases de efeito estufa. Os empréstimos distribuídos pelo Programa ABC entre os estados brasileiros não são, no entanto, proporcionais à participação de cada estado nas atividades agropecuárias brasileiras. O objetivo do presente trabalho foi identificar os possíveis fatores que determinam a distribuição dos recursos do Programa ABC entre os estados brasileiros. Utilizou-se para tal uma análise exploratória de dados e o cálculo do coefiente de correlação de Spearman, tendo como amostra os estados brasileiros, de 2011 a 2014. Dentre as variáveis associadas à produção agropecuária utilizadas, encontrou-se maiores correlações positivas e significativas entre o crédito do Programa ABC e as produções de soja, milho e pecuária bovina. Também foram verificadas correlações positivas associadas ao número de agências do Banco do Brasil, renda per capita e escolaridade, porém, de menor magnitude. No caso das áreas de pastagens degradadas, há baixa correlação destas com o crédito. Esses resultados indicam que o Programa ABC tem sido mais utilizado nos estados em que a produção de grãos e de bovinos é mais avançada, com baixa adoção, portanto, em regiões com maior potencial de redução de gases de efeito estufa.

Períodos de dessecação de Urochloa ruziziensis e seu reflexo na produtividade da soja RR

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Épocas de manejo químico de Brachiaria decumbens antecedendo o plantio direto de soja

O manejo químico da cobertura vegetal e a manutenção da palhada sobre o solo são preocupações comuns para os produtores que adotam o sistema plantio direto na região dos cerrados. Com o objetivo de estudar a influência da época de manejo químico de B. decumbens sobre o desenvolvimento e a produtividade da cultura da soja em sistema plantio direto, foram realizados dois ensaios a campo, respectivamente, com os cultivares BRS 154 e MG/BR 46-Conquista, no ano de 2003. em cada ensaio, testaram-se quatro épocas de manejo de B. decumbens antecedendo a semeadura da soja (28, 14, 7 e 0 dias), utilizando-se o herbicida glifosato. Os ensaios foram conduzidos em delineamento inteiramente casualizado, utilizando-se três repetições no primeiro e quatro no segundo. Determinou-se a matéria seca da cobertura vegetal e avaliou-se a reinfestação de B. decumbens. Na cultura da soja, foram determinados: altura de inserção da primeira vagem, número de vagens por planta, umidade dos grãos, massa de 100 grãos e produtividade. Com base nos resultados obtidos, conclui-se que a época mais adequada para o manejo químico de B. decumbens com glifosato situa-se entre 7 e 14 dias antes da semeadura da cultura da soja e que a escolha da época de manejo químico da cobertura vegetal afeta de forma decisiva o desenvolvimento e a produtividade da cultura.

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.