A benzothiadiazole end capped donor–acceptor based small molecule for organic electronics

A benzothiadiazole end-capped small molecule 3,6-bis(5-(benzo[c][1,2,5] thiadiazol-4-yl)thiophen-2-yl)-2,5-bis(2-butyloctyl)pyrrolo[3,4-c]pyrrole-1, 4(2H,5H)-dione (BO-DPP-BTZ) using a fused aromatic moiety DPP (at the centre) is designed and synthesized. BO-DPP-BTZ is a donor-acceptor-donor (D-A-D) structure which possesses a band gap of 1.6 eV and exhibits a strong solid state ordering inferred from ∼120 nm red shift of the absorption maxima from solution to thin film. Field-effect transistors utilizing a spin coated thin film of BO-DPP-BTZ as an active layer exhibited a hole mobility of 0.06 cm 2 V-1 s-1. Solution-processed bulk heterojunction organic photovoltaics employing a blend of BO-DPP-BTZ and [70]PCBM demonstrated a power conversion efficiency of 0.9%.

Corporate Environmental and Economic Performance of Japanese Manufacturing Firms: Empirical Study for Sustainable Development

This study examines the relationship between environmental performance and economic performance in Japanese manufacturing firms. The environmental performance indicators include CO2 emissions and the aggregate toxic risk associated with chemical emissions relative to sales. Return on assets (ROA) is used as an indicator of economic performance. We demonstrate that there is a significant inverted U-shaped relationship between ROA and environmental performance calculated by aggregated toxic risk. We also find that the environmental performance increases ROA through both returns on sales and improved capital turnover. However, we observe a significant positive relationship between financial performance and environmental performance based on CO2 emissions. These findings may provide evidence for the consequences of firms' environmental behavior and sustainable development. © 2012 John Wiley & Sons, Ltd and ERP Environment.

Health and safety regulatory reform in Australia : challenges and issues for smaller ethnic firms

In recent times significant change has occurred to the Australian health and safety regulatory context. In this paper we consider the potential response of smaller firms in general, and ethnic owned and/or operated smaller firms in particular. We draw on literature examining smaller firms' responses to regulation and apply this to what little we know about smaller ethnic firms in Australia in the context of the regulatory change. We highlight the challenges to owner managers and what could be done to engage and support smaller ethnic firms to realise the opportunities resulting from this regulatory change.

Informal e-learning : the case of small business owners

Purpose - The purpose of this paper is to investigate the use of an informal online discussion forum (ODF) to encourage voluntary participation and promote double-loop learning by small business owners (SBOs). Design/methodology/approach - A qualitative methodology was used where data gathered from three sources, the ODF posts, in-depth interviews with participants and a focus group with non-participants. These were analysed to evaluate learning of SBOs in an ODF. Findings - This research provides evidence that an ODF for SBOs supports double-loop learning; however, participation could not be assumed simply by the online availability of the discussion resource. Research limitations/implications - Few SBOs participated in the ODF which is consistent with research finding SBOs are a difficult group to engage in learning. Four forms of data were analysed to strengthen results. Practical implications - Caution should be exercised when considering investment in e-learning for SBOs. Originality/value - Evidence showing e-learning through an informal voluntary ODF can promote deep learning for SBOs.

Stock prices of clean energy firms, oil and carbon markets : a vector autoregressive analysis

Recent discussions of energy security and climate change have attracted significant attention to clean energy. We hypothesize that rising prices of conventional energy and/or placement of a price on carbon emissions would encourage investments in clean energy firms. The data from three clean energy indices show that oil prices and technology stock prices separately affect the stock prices of clean energy firms. However, the data fail to demonstrate a significant relationship between carbon prices and the stock prices of the firms.

International Handbook of Entrepreneurship and HRM

This invaluable reference tool has been designed in response to the growing recognition that too little is known about the intersection between entrepreneurship and human resource management. Paying particular attention to the ‘people’ side of venture emergence and development, it offers unique insights into the role that human resource management (HRM) plays in small and entrepreneurial firms.

The relationship between small firm growth and HRM practices

The relationship between small firm growth and HRM practices Rowena Barrett, Susan Mayson and Niel Warriner Introduction In this chapter we explore the relationship between small firms’ growth orientation, their business planning efforts and the role the owner plays and whether or not formal HRM practices are used. Formal HRM practices are assessed in terms of whether they are written down, regularly applied or assured to take place. We take on board Heneman et al.’s (2000) suggestion that ‘surveys of employer practices across SMEs [would] be [a] valuable addition to the strategic human resource management literature’ (p. 23) and report the results of an online and paper survey of a sample of 1753 small firms (defined as those employing less than 20 people) in the state of Victoria (SE Australia). Our particular interest in this chapter, which is based on an analysis of 410 responses to the survey, is whether growthoriented small firms adopt formal HRM practices. This research contributes to understanding whether more formal organizational systems and routines are more likely to be used (or not) to nurture human capital in growth-oriented small firms. Moreover by focusing on firm growth, this chapter, consistent with recent calls in the literature (see Baron, 2003; Barrett and Mayson, 2006; Katz et al., 2000; Tansky and Heneman, 2003), contributes to a better understanding of issues at the intersection of entrepreneurship and HRM research.

Human resource management and entrepreneurship : building theory at the intersection

In 2008 we brought together much work at the intersection of entrepreneurship and human resource management (HRM) (Barrett & Mayson, 2008), after calls for more research (Baron, 2003; Katz, Aldrich, Welbourne & Williams, 2000; Tansky & Heneman, 2003). More has been collated since (Soriano, Dobon & Tansky, 2010; Tansky, Soriano & Dobon, 2010). We think it is now time again to regroup, pull conversational threads together and have a critical look at recent research at the intersection of HRM and Entrepreneurship. As editors of International Handbook of Entrepreneurship and HRM (Barrett & Mayson, 2008) we were privileged to collect 23 wonderfully diverse chapters from scholars around the globe addressing a range of issues at the intersection of the two pertinent disciplines or fields: HRM and entrepreneurship. This edition represented a coalescing of ideas that had been swirling about for some time. In three sections, the first dealt with theory and research methods, the second with the nature of HRM in small and entrepreneurial firms and the third with the functional aspects of HRM. At the time we were aware that the handbook did not cover the entire field and many topics were left unexplored. For example, the topic of regulation was generally absent while issues such as career advancement, performance management, organisational change and gender, diversity and ethnicity were also missing. In essence, the majority of those contributions sought to develop an understanding of the context in which particular aspects of HRM can be played out.

A story about being engaged in research : buzzing bees, small business and Australian unfair dismissal laws

Protection for employees from unfair dismissal (UFD) has been around in Australia under various guises for 30 years or so (Chapman, 2006). Labour standards, and particularly ILO Convention 158 (Convention Concerning Termination of Employment at the Initiative of the Employer 1982), underpin the adoption of a particular form of federal statutory UFD regime which first appeared in the 1993 reforms to the Industrial Relations Act 1998 (Commonwealth). Its existence, however, has not been uncontroversial, and the meaning, operation, scope and remedies have attracted attention over time. In fact, the first reforms to the federal UFD regime were undertaken under the Keating Labor government three months after they were enacted (Chapman, ibid.). Further reforms were made by the incoming Howard Liberal-national coalition government through the Workplace Relations Act 1996 (Commonwealth) (WRA), and arguably these reforms continued down the ‘contraction’ path (ibid.).

Sentencing and public confidence in Australia: The dynamics and foci of small group deliberations

This study is the first of its kind in Australia to use the deliberative small group methodology to explore participants’ deeper, nuanced thoughts on specific criminal justice issues in order to gain insight into the underlying beliefs that influence people’s opinions on sentencing. The use of small group discussions allows an analysis of the dynamics of people’s interactions and the potential of these to elicit deeper, more thoughtful deliberation. Participants’ comments around two policy areas – mandatory sentencing and the use of alternatives to imprisonment – were founded on concerns about the need for judges to tailor the sentence to fit the specific circumstances of each case. The methodology itself has shown that people may change their initial opinions on complex issues when given the opportunity to discuss and reflect on their beliefs.

An e-support firm's response to local e-readiness and the global e-business environment

The purpose of this study is to understand a small e-support firm’s response to the local e-readiness and the global e-business environment in a developing context. E-Support firms provide Web development and consultancy services to user organizations, assisting them in their uptake and maintenance of their Internet applications. Within the e-readiness research area, little is known about e-support firms, particularly in connection with their interaction with their local and the global e-business environment. As yet the emphasis on e-readiness studies has been at the national level. Nevertheless, the e-support sector is very significant in the successful adoption and diffusion of the Internet and related applications in any economy. It is thus important to understand how such firms relate to their e-business environments.That said, this study draws on the interpretive case study of a small e-support firm in Ghana, a developing context, to investigate the firm’s response to the e-readiness level of the local and the global e-business environment. Findings show that the firm could employ resources from the global environment to address most of the infrastructural challenges posed by a relatively poor local e-readiness context. However, its attempt to transfer advanced e-business technologies from the global e-business environment to the local e-business context did not succeed. This chapter offers implications for practice and research concerning the notion of reconciling local and global e-business environments in the small e-support sector.

Profiling human resource management practices in innovative firms

It has been argued that different bundles or configurations of human resource practices can improve innovation performance, but there is little empirically-based research that provides details of the practices utilised by different types of innovative firms. This study aimed to identify how different types of firms vary their HR practices to build organisation-specific innovation capabilities. The paper presents findings from a qualitative study of 26 innovative Danish firms categorised as technology-based, knowledge-intensive, or hybrid in their industry orientation. The findings highlight that knowledge-intensive firms have notably different profiles of HRM practices to technology-based firms, suggesting that firms utilise different practices to build innovation capacity depending on the core capabilities required for success in their respective industries. This paper contributes by demonstrating how HR practices differ across types of firms rather than relying on a universal perspective or one best way to design and implement HR practices.

When to pull the plug and when to take the plunge : timing strategic decisions about new ventures

It is not uncommon for firms to explore a new venture under the belief it will generate profits, only to find out later that although costs accumulated, profits did not materialize. To manage the high level of uncertainty involved in this process, new ventures are generally designed as vehicles of exploration (Wu, 2012) that allow for a staged investment of resources, starting with small initial investments that can be scaled up or discontinued as uncertainty is resolved over time (Folta, 1998; Li and Chi, 2013). As such, new ventures provide firms a vehicle by which they can probe an uncertain future (Brown and Eisenhardt, 1997) without fully committing early on to an irreversible course of action (Folta, Johnson, and O’Brien, 2006). Our focus in the present paper is on the timing of strategic decisions that firms make regarding their exploration ventures. Prior research in the fields of entrepreneurship, real options reasoning, and decision speed has demonstrated a link between the timing of making decisions and performance (Baum and Wally, 2003; Eisenhardt, 1989; Judge and Miller, 1991). The antecedents to the timing of decisions, however, are less understood and pose an interesting dilemma.

Examining the critical interplay of knowledge acquisition and integration capabilities in service innovation-based competitive advantage in project oriented service firms

While past knowledge-based approaches to service innovation have emphasized the role of knowledge integration in the delivery of customer-focused solutions, these approaches do not adequately address the complexities inherent in knowledge acquisition and integration in project-oriented firms. Adopting a dynamic capability framework and building on knowledge-based approaches to innovation, the current study examines how the interplay of learning capabilities and knowledge integration capability impacts service innovation and sustained competitive advantage. This two-stage multi-sample study finds that entrepreneurial project-oriented service firms in their quest for competitive advantage through greater innovation invest in knowledge acquisition and integration capabilities. Implications for theory and practice are discussed and directions for future research provided.

An experimental approach to air gap optimisation for a correction-less small field diode

Aim A recent Monte Carlo based study has shown that it is possible to design a diode that measures small field output factors equivalent to that in water. This is accomplished by placing an appropriate sized air gap above the silicon chip (1) with experimental results subsequently confirming that a particular Monte Carlo design was accurate (2). The aim of this work was to test if a new correction-less diode could be designed using an entirely experimental methodology. Method: All measurements were performed on a Varian iX at a depth of 5 cm, SSD of 95 cm and field sizes of 5, 6, 8, 10, 20 and 30 mm. Firstly, the experimental transfer of kq,clin,kq,msr from a commonly used diode detector (IBA, stereotactic field diode (SFD)) to another diode detector (Sun Nuclear, unshielded diode, (EDGEe)) was tested. These results were compared to Monte Carlo calculated values of the EDGEe. Secondly, the air gap above the EDGEe silicon chip was optimised empirically. Nine different air gap “tops” were placed above the EDGEe (air depth = 0.3, 0.6, 0.9 mm; air width = 3.06, 4.59, 6.13 mm). The sensitivity of the EDGEe was plotted as a function of air gap thickness for the field sizes measured. Results: The transfer of kq,clin,kq,msr from the SFD to the EDGEe was correct to within the simulation and measurement uncertainties. The EDGEe detector can be made “correction-less” for field sizes of 5 and 6 mm, but was ∼2% from being “correction-less” at field sizes of 8 and 10 mm. Conclusion Different materials will perturb small fields in different ways. A detector is only “correction-less” if all these perturbations happen to cancel out. Designing a “correction-less” diode is a complicated process, thus it is reasonable to expect that Monte Carlo simulations should play an important role.