Improving Readability of Swedish Electronic Health Records through Lexical Simplification : First Results

This paper describes part of an ongoing effort to improve the readability of Swedish electronic health records (EHRs). An EHR contains systematic documentation of a single patient’s medical history across time, entered by healthcare professionals with the purpose of enabling safe and informed care. Linguistically, medical records exemplify a highly specialised domain, which can be superficially characterised as having telegraphic sentences involving displaced or missing words, abundant abbreviations, spelling variations including misspellings, and terminology. We report results on lexical simplification of Swedish EHRs, by which we mean detecting the unknown, out-ofdictionary words and trying to resolve them either as compounded known words, abbreviations or misspellings.

Imagerie Musicale Involontaire : caractéristiques phénoménologiques et mnésiques

L’imagerie musicale involontaire (IMIN) est un phénomène mental extrêmement commun. Il peut être défini en tant que type d’imagerie mentale musicale qui devient consciente sans effort ou intentionnalité et qui n’est pas pathologique. La forme la plus connue d’IMIN est le « ver d’oreille », qui se présente généralement comme un court extrait musical tournant en boucle en tête et dont on se débarrasse difficilement. L’objectif principal de la présente thèse est d’investiguer les mécanismes cognitifs sous-tendant le phénomène puisque, malgré l’intérêt répandu dans les médias populaires, son étude expérimentale est récente et un modèle intégré n’a pas encore été proposé. Dans la première étude, l’induction expérimentale a été tentée et les caractéristiques des images mentales d’épisodes d’IMIN ont été investiguées. Dans le laboratoire, des chansons accrocheuses (versus des proverbes) ont été présentées répétitivement aux participants qui devaient ensuite les chanter le plus fidèlement possible. Ils ont par après quitté le laboratoire, une enregistreuse numérique en mains, avec la consigne d’enregistrer une reproduction vocale la plus fidèle possible de ce qu’ils avaient en tête lors de tous leurs épisodes d’IMIN sur une période de quatre jours, ainsi que de décrire leur timbre. L’expérience a été répétée deux semaines plus tard. Douze des dix-huit participants du groupe expérimental ont rapporté des pièces induites comme épisodes d’IMIN, ce qui confirme l’efficacité de la procédure d’induction. La tonalité et le tempo des productions ont ensuite été analysés et comparés à ceux des pièces originales. Similairement pour les épisodes d’IMIN induits et les autres, les tempi produits et, dans une moindre mesure pour les non-musiciens, les tonalités étaient proches des originaux. Le timbre décrit était généralement une version simplifiée de l’original (un instrument et/ou une voix). Trois études se sont ensuite intéressées au lien entre le potentiel d’IMIN et la mémorabilité. Dans une étude préliminaire, 150 chansons du palmarès francophone radiophonique ont été évaluées en ligne par 164 participants, sur leur niveau de familiarité, d’appréciation et de potentiel d’IMIN. Les pièces ont ensuite été divisées en groupes de stimuli à faible et à fort potentiel d’IMIN, qui ont été utilisés dans une tâche typique de rappel libre/reconnaissance, premièrement avec des francophones (pour qui les pièces étaient familières) et ensuite avec des non-francophones (pour qui les pièces étaient non-familières). Globalement, les pièces à fort potentiel d’IMIN étaient mieux rappelées et reconnues que les pièces à faible potentiel. Une dernière étude a investigué l’impact de la variabilité inter-stimulus du timbre sur les résultats précédents, en demandant à une chanteuse d’enregistrer les lignes vocales des pièces et en répétant l’expérience avec ces nouveaux stimuli. La différence précédemment observée entre les stimuli à fort et à faible potentiel d’IMIN dans la tâche de reconnaissance a ainsi disparu, ce qui suggère que le timbre est une caractéristique importante pour le potentiel d’IMIN. En guise de conclusion, nous suggérons que les phénomènes mentaux et les mécanismes cognitifs jouant un rôle dans les autres types de souvenirs involontaires peuvent aussi s’appliquer à l’IMIN. Dépendamment du contexte, la récupération mnésique des pièces peut résulter de la répétition en mémoire à court terme, de l’amorçage à court et long terme ou de l’indiçage provenant de stimuli dans l’environnement ou les pensées. Une des plus importantes différences observables entre l’IMIN et les autres souvenirs involontaires est la répétition. Nous proposons que la nature même de la musique, qui est définie par la répétition à un niveau micro- et macro-structurel en est responsable.

BETA-GA2O3: A TRANSPARENT CONDUCTIVE OXIDE FOR POTENTIAL RESISTIVE SWITCHING APPLICATIONS

Thesis (Ph.D.)--University of Washington, 2016-08

Ensuring Mobile Device Security and Compliance at the Workplace

End users urgently request using mobile devices at their workplace. They know these devices from their private life and appreciate functionality and usability, and want to benefit from these advantages at work as well. Limitations and restrictions would not be accepted by them. On the contrary, companies are obliged to employ substantial organizational and technical measures to ensure data security and compliance when allowing to use mobile devices at the workplace. So far, only individual arrangements have been presented addressing single issues in ensuring data security and compliance. However, companies need to follow a comprehensive set of measures addressing all relevant aspects of data security and compliance in order to play it safe. Thus, in this paper at first technical architectures for using mobile devices in enterprise IT are reviewed. Thereafter a set of compliance rules is presented and, as major contribution, technical measures are explained that enable a company to integrate mobile devices into enterprise IT while still complying with these rules comprehensively. Depending on the company context, one or more of the technical architectures have to be chosen impacting the specific technical measures for compliance as elaborated in this paper. Altogether this paper, for the first time, correlates technical architectures for using mobile devices at the workplace with technical measures to assure data security and compliance according to a comprehensive set of rules.

BYOD Bring Your Own Device

Using modern devices like smartphones and tablets offers a wide variety of advantages; this has made them very popular as consumer devices in private life. Using them in the workplace is also popular. However, who wants to carry around and handle two devices; one for personal use, and one for work-related tasks? That is why “dual use”, using one single device for private and business applications, may represent a proper solution. The result is “Bring Your Own Device,” or BYOD, which describes the circumstance in which users make their own personal devices available for company use. For companies, this brings some opportunities and risks. We describe and discuss organizational issues, technical approaches, and solutions.

Electrical and optical studies on carbon nanotube arrays

Single-walled carbon nanotubes (SWNTs) have been studied as a prominent class of high performance electronic materials for next generation electronics. Their geometry dependent electronic structure, ballistic transport and low power dissipation due to quasi one dimensional transport, and their capability of carrying high current densities are some of the main reasons for the optimistic expectations on SWNTs. However, device applications of individual SWNTs have been hindered by uncontrolled variations in characteristics and lack of scalable methods to integrate SWNTs into electronic devices. One relatively new direction in SWNT electronics, which avoids these issues, is using arrays of SWNTs, where the ensemble average may provide uniformity from device to device, and this new breed of electronic material can be integrated into electronic devices in a scalable fashion. This dissertation describes (1) methods for characterization of SWNT arrays, (2) how the electrical transport in these two-dimensional arrays depend on length scales and spatial anisotropy, (3) the interaction of aligned SWNTs with the underlying substrate, and (4) methods for scalable integration of SWNT arrays into electronic devices. The electrical characterization of SWNT arrays have been realized by polymer electrolyte-gated SWNT thin film transistors (TFTs). Polymer electrolyte-gating addresses many technical difficulties inherent to electrical characterization by gating through oxide-dielectrics. Having shown polymer electrolyte-gating can be successfully applied on SWNT arrays, we have studied the length scaling dependence of electrical transport in SWNT arrays. Ultrathin films formed by sub-monolayer surface coverage of SWNT arrays are very interesting systems in terms of the physics of two-dimensional electronic transport. We have observed that they behave qualitatively different than the classical conducting films, which obey the Ohm’s law. The resistance of an ultrathin film of SWNT arrays is indeed non-linear with the length of the film, across which the transport occurs. More interestingly, a transition between conducting and insulating states is observed at a critical surface coverage, which is called percolation limit. The surface coverage of conducting SWNTs can be manipulated by turning on and off the semiconductors in the SWNT array, leading to the operation principle of SWNT TFTs. The percolation limit depends also on the length and the spatial orientation of SWNTs. We have also observed that the percolation limit increases abruptly for aligned arrays of SWNTs, which are grown on single crystal quartz substrates. In this dissertation, we also compare our experimental results with a two-dimensional stick network model, which gives a good qualitative picture of the electrical transport in SWNT arrays in terms of surface coverage, length scaling, and spatial orientation, and briefly discuss the validity of this model. However, the electronic properties of SWNT arrays are not only determined by geometrical arguments. The contact resistances at the nanotube-nanotube and nanotube-electrode (bulk metal) interfaces, and interactions with the local chemical groups and the underlying substrates are among other issues related to the electronic transport in SWNT arrays. Different aspects of these factors have been studied in detail by many groups. In fact, I have also included a brief discussion about electron injection onto semiconducting SWNTs by polymer dopants. On the other hand, we have compared the substrate-SWNT interactions for isotropic (in two dimensions) arrays of SWNTs grown on Si/SiO2 substrates and horizontally (on substrate) aligned arrays of SWNTs grown on single crystal quartz substrates. The anisotropic interactions associated with the quartz lattice between quartz and SWNTs that allow near perfect horizontal alignment on substrate along a particular crystallographic direction is examined by Raman spectroscopy, and shown to lead to uniaxial compressive strain in as-grown SWNTs on single crystal quartz. This is the first experimental demonstration of the hard-to-achieve uniaxial compression of SWNTs. Temperature dependence of Raman G-band spectra along the length of individual nanotubes reveals that the compressive strain is non-uniform and can be larger than 1% locally at room temperature. Effects of device fabrication steps on the non-uniform strain are also examined and implications on electrical performance are discussed. Based on our findings, there are discussions about device performances and designs included in this dissertation. The channel length dependences of device mobilities and on/off ratios are included for SWNT TFTs. Time response of polymer-electrolyte gated SWNT TFTs has been measured to be ~300 Hz, and a proof-of-concept logic inverter has been fabricated by using polymer electrolyte gated SWNT TFTs for macroelectronic applications. Finally, I dedicated a chapter on scalable device designs based on aligned arrays of SWNTs, including a design for SWNT memory devices.

Carbon nanotube films for flexible electronics

Discovering scalable routes to fabricate large scale electronic devices on flexible substrates has been the goal of the newly emerging field of flexible macroelectronics. Thin film transistors (TFTs) have been fabricated on flexible substrates by using organic small-molecule and polymer-based materials, or thin layers of crystalline inorganic semiconductors. Recently, films of carbon nanotubes have been proposed as electronic materials with superior electrical performance due to exceptional electrical and mechanical properties of single-walled carbon nanotubes (SWCNTs). In this thesis, some aspects of recent research efforts on integrating arrays of carbon nanotubes into macroelectronic devices are described. Carbon nanotube films have two major uses for flexible macroelectronics. The first approach uses carbon nanotube thin films as active semiconducting materials in the channel of flexible TFTs. Even though, high-performance carbon nanotube thin film transistors have been realized, the electronic non-homogeneity of the as-grown carbon nanotubes in the film limits the device performance for some applications. In this thesis, the application of electrochemical functionalization on carbon nanotube films to improve the electronic homogeneity of the film is described. The effect of the crystal quartz substrates on the growth rate of carbon nanotubes, and whether this can be used to sort out as-grown carbon nanotubes by electronic type is also discussed. Finally, I argue that high density carbon nanotube films can also be used as highly conducting stretchable interconnects on mechanically flexible electronic circuits. The sheet resistance and the nature of the buckling of carbon nanotube films on flexible substrates are discussed.

Interaction techniques with novel multimodal feedback for addressing gesture-sensing systems

Users need to be able to address in-air gesture systems, which means finding where to perform gestures and how to direct them towards the intended system. This is necessary for input to be sensed correctly and without unintentionally affecting other systems. This thesis investigates novel interaction techniques which allow users to address gesture systems properly, helping them find where and how to gesture. It also investigates audio, tactile and interactive light displays for multimodal gesture feedback; these can be used by gesture systems with limited output capabilities (like mobile phones and small household controls), allowing the interaction techniques to be used by a variety of device types. It investigates tactile and interactive light displays in greater detail, as these are not as well understood as audio displays. Experiments 1 and 2 explored tactile feedback for gesture systems, comparing an ultrasound haptic display to wearable tactile displays at different body locations and investigating feedback designs. These experiments found that tactile feedback improves the user experience of gesturing by reassuring users that their movements are being sensed. Experiment 3 investigated interactive light displays for gesture systems, finding this novel display type effective for giving feedback and presenting information. It also found that interactive light feedback is enhanced by audio and tactile feedback. These feedback modalities were then used alongside audio feedback in two interaction techniques for addressing gesture systems: sensor strength feedback and rhythmic gestures. Sensor strength feedback is multimodal feedback that tells users how well they can be sensed, encouraging them to find where to gesture through active exploration. Experiment 4 found that they can do this with 51mm accuracy, with combinations of audio and interactive light feedback leading to the best performance. Rhythmic gestures are continuously repeated gesture movements which can be used to direct input. Experiment 5 investigated the usability of this technique, finding that users can match rhythmic gestures well and with ease. Finally, these interaction techniques were combined, resulting in a new single interaction for addressing gesture systems. Using this interaction, users could direct their input with rhythmic gestures while using the sensor strength feedback to find a good location for addressing the system. Experiment 6 studied the effectiveness and usability of this technique, as well as the design space for combining the two types of feedback. It found that this interaction was successful, with users matching 99.9% of rhythmic gestures, with 80mm accuracy from target points. The findings show that gesture systems could successfully use this interaction technique to allow users to address them. Novel design recommendations for using rhythmic gestures and sensor strength feedback were created, informed by the experiment findings.

Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages

Nonlinear thermo-mechanical properties of advanced polymers are crucial to accurate prediction of the process induced warpage and residual stress of electronics packages. The Fiber Bragg grating (FBG) sensor based method is advanced and implemented to determine temperature and time dependent nonlinear properties. The FBG sensor is embedded in the center of the cylindrical specimen, which deforms together with the specimen. The strains of the specimen at different loading conditions are monitored by the FBG sensor. Two main sources of the warpage are considered: curing induced warpage and coefficient of thermal expansion (CTE) mismatch induced warpage. The effective chemical shrinkage and the equilibrium modulus are needed for the curing induced warpage prediction. Considering various polymeric materials used in microelectronic packages, unique curing setups and procedures are developed for elastomers (extremely low modulus, medium viscosity, room temperature curing), underfill materials (medium modulus, low viscosity, high temperature curing), and epoxy molding compound (EMC: high modulus, high viscosity, high temperature pressure curing), most notably, (1) zero-constraint mold for elastomers; (2) a two-stage curing procedure for underfill materials and (3) an air-cylinder based novel setup for EMC. For the CTE mismatch induced warpage, the temperature dependent CTE and the comprehensive viscoelastic properties are measured. The cured cylindrical specimen with a FBG sensor embedded in the center is further used for viscoelastic property measurements. A uni-axial compressive loading is applied to the specimen to measure the time dependent Young’s modulus. The test is repeated from room temperature to the reflow temperature to capture the time-temperature dependent Young’s modulus. A separate high pressure system is developed for the bulk modulus measurement. The time temperature dependent bulk modulus is measured at the same temperatures as the Young’s modulus. The master curve of the Young’s modulus and bulk modulus of the EMC is created and a single set of the shift factors is determined from the time temperature superposition. The supplementary experiments are conducted to verify the validity of the assumptions associated with the linear viscoelasticity. The measured time-temperature dependent properties are further verified by a shadow moiré and Twyman/Green test.

Trapping phosphorus (III) into polyoxometalates: synthesis, characterisation and electronic behaviour study

The introduction of electronically-active heteroanions into polyoxometalates (POMs) is one of the emerging topics in this field. The novel clusters have shown unprecedented intramolecular electron-transfer features that can be directly mediated by the incorporated heteroanions. In this thesis, we will focus on the study of phosphite (HPO32-) as new non-traditional heteroanions, discover HPO32- templated nanostructures, investigate their electronic behaviours as well as understand the self-assembly process of HPO32--templated species. The thesis starts with incorporating HPO32- into POM cages. The feasibility of this work was illustrated by the successful trapping of HPO32- into a “Trojan Horse” type {W18O56} nanocage. The reactivity of embedded {HPO3} was fully studied, showing the cluster undergoes a structural rearrangement in solution whereby the {HPO3} moieties dimerise to form a weakly interacting (O3PH···HPO3) moiety. In the crystalline state a temperature-dependent intramolecular redox reaction and structural rearrangement occurs. This rearrangement appears to proceed via an intermediate containing two different templates, a pyramidal {HPO3} and a tetrahedral {PO4} moiety. {HPO3} templated POM cages were then vigorously expanded and led to the isolation of five either fully oxidised or mixed-valence clusters trapped with mono-, di-, or tri- {HPO3}. Interestingly, an intriguing 3D honeycomb-like host-guest structure was also synthesised. The porous framework was self-aggregated by a tri-phopshite anion templated {W21} cluster with a {VO4} templated Wells-Dawson type {W18} acting as a guest species within the hexagonal channels. Based on this work, we further extended the templating anions to two different redox-active heteroanions, and discovered a unique mixed-heteroatom templated system built by pairing redox-active {HPIIIO3} with {TeO3}, {SeO3} or {AsO3}. Two molecular systems were developed, ie. “Trojan Horse” type [W18O56(HPO3)0.8(SeO3)1.2(H2O)2]8- and cross-shaped [H4P4X4W64O224]32-/36-, where X=TeIV, SeIV, AsIII. In the case of {W18(HPO3)0.8(SeO3)1.2}, the compound is found to be a mixture of heteroleptic {W18(HPO3)(SeO3)} and homoleptic {W18(SeO3)2} and {W18(HPO3)2}, identified by single crystal x-ray diffraction, NMR as well as high resolution mass spectrometry. The cluster exhibited similar temperature-dependent electronic features to “Trojan Horse” type {W18(HPO3)2O56}. However, due to the intrinsic reactivity difference between {HPO3} and {SeO3}, the thermal treatment leads to the formation of an unusual species [W18O55(PO4)(SeO3)]5-, in which {HPO3} was fully oxidised to {PO4} within the cage, whereas and lone-pair-containing {SeO3} heteroanions were kept intact inside the shell. This finding is extremely interesting, as it demonstrated that multiple and independent intramolecular electronic performance can be achieved by the coexistence of distinct heteroatoms within a single molecule. On the other hand, the cross-shaped [H4P4X4W64O224]32-/36- were constructed by four {W15(HPO3)(XO3)} building units linked by four {WO6} octahedra. Each building unit traps two different heteroatoms. It is interesting to note that the mixed heteroatom species show self-sorting, with a highly selective positional preference. Smaller ionic sized {HPO3} are self-organised into the uncapped side of {W15} cavity, whereas closed side are occupied by larger heteroatoms, which is surprisingly opposed to steric hindrance. Density functional theory (DFT) calculations are currently underway to have a full understanding of the preference of heteroatom substitutions. This series of clusters is of great interest in terms of achieving single molecule-based heteroatom-dependent multiple levels of electron transfer. It has opened a new way to design and synthesise POMs with higher diversity of electrical states, which may lead to a new type of Q-bits for quantum computing. The third chapter is focused on developing polyoxotungstate building blocks templated by {HPO3}. A series of building blocks, {W15O48(HPO3)2}, {W9O30(HPO3)} {W12O40(HPO3)2} and hexagonal {W6O18(HPO3)} have been obtained. The first four building blocks have been reported with {SeO3} and/or {TeO3} heteroanions. This result demonstrates {HPO3} has a similar reactivity as {SeO3} and {TeO3}, therefore studying the self-assembly of {HPO3}-based building blocks would be helpful to have a general understanding of pyramidal heteroatom-based molecular systems. The hexagonal {W6O18(HPO3)} is observed for the first time in polyoxotungstates, showing some of reactivity difference between {HPO3} and {SeO3} and {TeO3}. Furthermore, inorganic salts and pH values have some directing influence on the formation and transformation of various building blocks, resulting in the discovery of a family of {HPO3}-based clusters with nuclearity ranging from {W29} to {W106}. High resolution mass spectrometry was also carried out to investigate the cluster solution behaviour and also gain information of building block speciation. It is found that some clusters experienced decomposition, which gives rise to potential building blocks accountable for the self-assembly.

Electronic Packaging of Paper-Based Anisotropic Magnetoresistive Sensors

This report investigates adaptations of electronic packaging methods used to create stacks of these sensors. Four methods were developed and tested to determine the best option in terms of mechanical stability and electrical conductivity of the system. For the first method, a stack is created by way of through paper vias (TPVs), a hole that is cut in the pads of the sensors and then filled with electrically conductive adhesive through the openings on the two sensors to be joined. The second method is called mechanical caulking and connects sensors through pads which have been lined with copper tape backed with conductive adhesive. The connection is created with a small copper rivet which is flattened in place by compressive force. The third method is the stitching method which is inspired by sewing of fabric. A pattern of thin copper wire is stitched on the pad of a sensor that is lined with copper tape backed with conductive adhesive. The wire is then stitched through a second sensor that is treated similarly with copper tape and the stack receives the same pattern through the two layers as was applied to the first sensor alone. The final method is the collapsed daisy chain which is the linear connection of sensors to their neighboring sensors via copper tape backed with conductive adhesive. The row of sensors is then collapsed in an alternating orientation into a single stack.

Application of an online-biomass sensor in an optical multisensory platform prototype for growth monitoring of biotechnical relevant microorganism and cell lines in single-use shake flasks

In the context of this work we evaluated a multisensory, noninvasive prototype platform for shake flask cultivations by monitoring three basic parameters (pH, pO2 and biomass). The focus lies on the evaluation of the biomass sensor based on backward light scattering. The application spectrum was expanded to four new organisms in addition to E. coli K12 and S. cerevisiae [1]. It could be shown that the sensor is appropriate for a wide range of standard microorganisms, e.g., L. zeae, K. pastoris, A. niger and CHO-K1. The biomass sensor signal could successfully be correlated and calibrated with well-known measurement methods like OD600, cell dry weight (CDW) and cell concentration. Logarithmic and Bleasdale-Nelder derived functions were adequate for data fitting. Measurements at low cell concentrations proved to be critical in terms of a high signal to noise ratio, but the integration of a custom made light shade in the shake flask improved these measurements significantly. This sensor based measurement method has a high potential to initiate a new generation of online bioprocess monitoring. Metabolic studies will particularly benefit from the multisensory data acquisition. The sensor is already used in labscale experiments for shake flask cultivations.

Imagerie Musicale Involontaire : caractéristiques phénoménologiques et mnésiques

L’imagerie musicale involontaire (IMIN) est un phénomène mental extrêmement commun. Il peut être défini en tant que type d’imagerie mentale musicale qui devient consciente sans effort ou intentionnalité et qui n’est pas pathologique. La forme la plus connue d’IMIN est le « ver d’oreille », qui se présente généralement comme un court extrait musical tournant en boucle en tête et dont on se débarrasse difficilement. L’objectif principal de la présente thèse est d’investiguer les mécanismes cognitifs sous-tendant le phénomène puisque, malgré l’intérêt répandu dans les médias populaires, son étude expérimentale est récente et un modèle intégré n’a pas encore été proposé. Dans la première étude, l’induction expérimentale a été tentée et les caractéristiques des images mentales d’épisodes d’IMIN ont été investiguées. Dans le laboratoire, des chansons accrocheuses (versus des proverbes) ont été présentées répétitivement aux participants qui devaient ensuite les chanter le plus fidèlement possible. Ils ont par après quitté le laboratoire, une enregistreuse numérique en mains, avec la consigne d’enregistrer une reproduction vocale la plus fidèle possible de ce qu’ils avaient en tête lors de tous leurs épisodes d’IMIN sur une période de quatre jours, ainsi que de décrire leur timbre. L’expérience a été répétée deux semaines plus tard. Douze des dix-huit participants du groupe expérimental ont rapporté des pièces induites comme épisodes d’IMIN, ce qui confirme l’efficacité de la procédure d’induction. La tonalité et le tempo des productions ont ensuite été analysés et comparés à ceux des pièces originales. Similairement pour les épisodes d’IMIN induits et les autres, les tempi produits et, dans une moindre mesure pour les non-musiciens, les tonalités étaient proches des originaux. Le timbre décrit était généralement une version simplifiée de l’original (un instrument et/ou une voix). Trois études se sont ensuite intéressées au lien entre le potentiel d’IMIN et la mémorabilité. Dans une étude préliminaire, 150 chansons du palmarès francophone radiophonique ont été évaluées en ligne par 164 participants, sur leur niveau de familiarité, d’appréciation et de potentiel d’IMIN. Les pièces ont ensuite été divisées en groupes de stimuli à faible et à fort potentiel d’IMIN, qui ont été utilisés dans une tâche typique de rappel libre/reconnaissance, premièrement avec des francophones (pour qui les pièces étaient familières) et ensuite avec des non-francophones (pour qui les pièces étaient non-familières). Globalement, les pièces à fort potentiel d’IMIN étaient mieux rappelées et reconnues que les pièces à faible potentiel. Une dernière étude a investigué l’impact de la variabilité inter-stimulus du timbre sur les résultats précédents, en demandant à une chanteuse d’enregistrer les lignes vocales des pièces et en répétant l’expérience avec ces nouveaux stimuli. La différence précédemment observée entre les stimuli à fort et à faible potentiel d’IMIN dans la tâche de reconnaissance a ainsi disparu, ce qui suggère que le timbre est une caractéristique importante pour le potentiel d’IMIN. En guise de conclusion, nous suggérons que les phénomènes mentaux et les mécanismes cognitifs jouant un rôle dans les autres types de souvenirs involontaires peuvent aussi s’appliquer à l’IMIN. Dépendamment du contexte, la récupération mnésique des pièces peut résulter de la répétition en mémoire à court terme, de l’amorçage à court et long terme ou de l’indiçage provenant de stimuli dans l’environnement ou les pensées. Une des plus importantes différences observables entre l’IMIN et les autres souvenirs involontaires est la répétition. Nous proposons que la nature même de la musique, qui est définie par la répétition à un niveau micro- et macro-structurel en est responsable.

Radio Frequency Superconducting Quantum Interference Device Meta-atoms and Metamaterials: Experiment, Theory, and Analysis

Metamamterials are 1D, 2D or 3D arrays of articial atoms. The articial atoms, called "meta-atoms", can be any component with tailorable electromagnetic properties, such as resonators, LC circuits, nano particles, and so on. By designing the properties of individual meta-atoms and the interaction created by putting them in a lattice, one can create a metamaterial with intriguing properties not found in nature. My Ph. D. work examines the meta-atoms based on radio frequency superconducting quantum interference devices (rf-SQUIDs); their tunability with dc magnetic field, rf magnetic field, and temperature are studied. The rf-SQUIDs are superconducting split ring resonators in which the usual capacitance is supplemented with a Josephson junction, which introduces strong nonlinearity in the rf properties. At relatively low rf magnetic field, a magnetic field tunability of the resonant frequency of up to 80 THz/Gauss by dc magnetic field is observed, and a total frequency tunability of 100% is achieved. The macroscopic quantum superconducting metamaterial also shows manipulative self-induced broadband transparency due to a qualitatively novel nonlinear mechanism that is different from conventional electromagnetically induced transparency (EIT) or its classical analogs. A near complete disappearance of resonant absorption under a range of applied rf flux is observed experimentally and explained theoretically. The transparency comes from the intrinsic bi-stability and can be tuned on/ off easily by altering rf and dc magnetic fields, temperature and history. Hysteretic in situ 100% tunability of transparency paves the way for auto-cloaking metamaterials, intensity dependent filters, and fast-tunable power limiters. An rf-SQUID metamaterial is shown to have qualitatively the same behavior as a single rf-SQUID with regards to dc flux, rf flux and temperature tuning. The two-tone response of self-resonant rf-SQUID meta-atoms and metamaterials is then studied here via intermodulation (IM) measurement over a broad range of tone frequencies and tone powers. A sharp onset followed by a surprising strongly suppressed IM region near the resonance is observed. This behavior can be understood employing methods in nonlinear dynamics; the sharp onset, and the gap of IM, are due to sudden state jumps during a beat of the two-tone sum input signal. The theory predicts that the IM can be manipulated with tone power, center frequency, frequency difference between the two tones, and temperature. This quantitative understanding potentially allows for the design of rf-SQUID metamaterials with either very low or very high IM response.