Pseudo Phase Plane and Fractional Calculus Modelling of Western Global Economic Downturn

This paper applies Pseudo Phase Plane (PPP) and Fractional Calculus (FC) mathematical tools for modeling world economies. A challenging global rivalry among the largest international economies began in the early 1970s, when the post-war prosperity declined. It went on, up to now. If some worrying threatens may exist actually in terms of possible ambitious military aggression, invasion, or hegemony, countries’ PPP relative positions can tell something on the current global peaceful equilibrium. A global political downturn of the USA on global hegemony in favor of Asian partners is possible, but can still be not accomplished in the next decades. If the 1973 oil chock has represented the beginning of a long-run recession, the PPP analysis of the last four decades (1972–2012) does not conclude for other partners’ global dominance (Russian, Brazil, Japan, and Germany) in reaching high degrees of similarity with the most developed world countries. The synergies of the proposed mathematical tools lead to a better understanding of the dynamics underlying world economies and point towards the estimation of future states based on the memory of each time series.

Fractional Dynamics Representation in the Pseudo Phase Plane

Proceedings of the 10th Conference on Dynamical Systems Theory and Applications

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Polycyclic aromatic hydrocarbons: levels and phase distributions in preschool microenvironment

This work aims to characterize levels and phase distribution of polycyclic aromatic hydrocarbons (PAHs) in indoor air of preschool environment and to assess the impact of outdoor PAH emissions to indoor environment. Gaseous and particulate (PM1 and PM2.5) PAHs (16 USEPA priority pollutants, plus dibenzo[a,l]pyrene, and benzo[j]fluoranthene) were concurrently sampled indoors and outdoors in one urban preschool located in north of Portugal for 35 days. The total concentration of 18 PAHs (ΣPAHs) in indoor air ranged from 19.5 to 82.0 ng/m3; gaseous compounds (range of 14.1–66.1 ng/m3) accounted for 85% ΣPAHs. Particulate PAHs (range 0.7–15.9 ng/m3) were predominantly associated with PM1 (76% particulate ΣPAHs) with 5-ring PAHs being the most abundant. Mean indoor/outdoor ratios (I/O) of individual PAHs indicated that outdoor emissions significantly contributed to PAH indoors; emissions from motor vehicles and fuel burning were the major sources.

Digit Ratio (2D:4D) in Newborns: Influences of Prenatal Testosterone and Maternal Environment

Introduction: The 2D:4D digit ratio is sexually-dimorphic, probably due to testosterone action through the perinatal period. We characterize the 2D:4D ratio in newborn (NB) infants, in between the pre- and postnatal surges of testosterone, and relate it to the mother's 2D:4D and to testosterone levels in the amniotic fluid (AF). Subjects and methods: Testosterone was assayed in samples of maternal plasma and AF collected at amniocentesis. Shortly after birth, 106 NBs and their mothers were measured for 2D:4D ratio. Results: NB males had lower mean 2D:4D ratios than females but this dimorphism was significant only for the left hand (males: 0.927; females: 0.950; p=0.004). Mothers who had sons had lower 2D:4D ratios than those who had daughters and the mother's 2D:4D were higher than those of NBs regardless of sex. Both hands of NB females were negatively correlated with AF testosterone and positively correlated with the mother's 2D:4D, but males showed no significant associations. Maternal plasma testosterone also showed a negative weak correlation with NB's digit ratio in both sexes. Conclusions: Sexual dimorphism at birth was only significant for the left hand, in contrast with reports of greater right hand dimorphism, suggesting that postnatal testosterone is determinant for 2D:4D stabilization. The lower 2D:4D ratios in mothers who had sons support claims that hormone levels in parents are influential for determining their children's sex. NB female's digit ratio, but not males', was associated to the level of AF testosterone. The mother's 2D:4D ratios were positively correlated with their daughters' 2D:4D, but the same was not observed for male NBs, suggesting that prenatal testosterone levels in male fetus lead their 2D:4D ratios to stray from their mothers' with high individual variability.

Reliability of Two Methods for Identifying the Postural Phase of Gait Initiation in Healthy and Post-stroke Subjects

This study aims to compare two methods of assessing the postural phase of gait initiation as to intrasession reliability, in healthy and post-stroke subjects. As a secondary aim, this study aims to analyse anticipatory postural adjustments during gait initiation based on the centre of pressure (CoP) displacements in post-stroke participants. The CoP signal was acquired during gait initiation in fifteen post-stroke subjects and twenty-three healthy controls. Postural phase was identified through a baseline-based method and a maximal displacement based method. In both healthy and post-stroke participants higher intra-class correlation coefficient and lower coefficient of variation values were obtained with the baseline-based method when compared to the maximal displacement based method. Post-stroke participants presented decreased CoP displacement backward and toward the first swing limb compared to controls when the baseline-based method was used. With the maximal displacement based method, there were differences between groups only regarding backward CoP displacement. Postural phase duration in medial-lateral direction was also increased in post-stroke participants when using the maximal displacement based method. The findings obtained indicate that the baseline-based method is more reliable detecting the onset of gait initiation in both groups, while the maximal displacement based method presents greater sensitivity for post-stroke participants.

Excretion-secretion products and proteases from live Sporothrix schenckii yeast phase: immunological detection and cleavage of human IgG

Antigenic preparations from Sporothrix schenckii usually involve materials from mixed cultures of yeast and mycelia presenting cross-reactions with other deep mycoses. We have standardized pure yeast phase with high viability of the cells suitable to obtain specific excretion-secretion products without somatic contaminations. These excretion-secretion products were highly immunogenic and did not produce noticeable cross-reactions in either double immunodiffusion or Western blot. The antigenic preparation consists mainly of proteins with molecular weights between 40 and 70 kDa, some of them with proteolytic activity in mild acidic conditions. We also observed cathepsin-like activity at two days of culture and chymotrypsin-like activity at four days of culture consistent with the change in concentration of different secreted proteins. The proteases were able to cleave different subclasses of human IgG suggesting a sequential production of antigens and molecules that could interact and interfere with the immune response of the host.

Antibiotics Utilization Ratio in a Nicu

Introduction: Antibiotics are one of the most common prescribed drugs in the NICU; despite this, studies on its use are scarce. Aim: To assess antibiotics utilization ratio in a medical surgical NICU. Methods: Prospective, observational study. Daily registry of antibiotics given to newborn infants; two periods of two months, 2010; data collected every day after the second medical round. Variables: treated patients, days on antibiotics, treatment/patient days, number of courses, number of antibiotics. Antibiotics utilization ratio – ratio days on antibiotics/days at the NICU. Results: Patients enrolled - 113; admission days – 1722; length of stay - 15.2 days; 85 newborn infants were given antibiotics; days on antibiotics - 771; antibiotics utilization ratio – 44.8; 292 antibiotics were prescribed; 61.8% of patients were given more than two antibiotics and 15.3% had more than one course. The most frequents were gentamicin, cefotaxime, ampicillin, vancomycin and metronidazole. Conclusion: Antibiotics utilization ratio should be subject of audits and a quality criteria on NICUs evaluation.

In vitro and in vivo antileishmanial efficacy of a combination therapy of diminazene and artesunate against Leishmania donovani in BALB/c mice

The in vitro and in vivo activity of diminazene (Dim), artesunate (Art) and combination of Dim and Art (Dim-Art) against Leishmania donovani was compared to reference drug; amphotericin B. IC50 of Dim-Art was found to be 2.28 ± 0.24 µg/mL while those of Dim and Art were 9.16 ± 0.3 µg/mL and 4.64 ± 0.48 µg/mL respectively. The IC50 for Amphot B was 0.16 ± 0.32 µg/mL against stationary-phase promastigotes. In vivo evaluation in the L. donovani BALB/c mice model indicated that treatments with the combined drug therapy at doses of 12.5 mg/kg for 28 consecutive days significantly (p < 0.001) reduced parasite burden in the spleen as compared to the single drug treatments given at the same dosages. Although parasite burden was slightly lower (p < 0.05) in the Amphot B group than in the Dim-Art treatment group, the present study demonstrates the positive advantage and the potential use of the combined therapy of Dim-Art over the constituent drugs, Dim or Art when used alone. Further evaluation is recommended to determine the most efficacious combination ratio of the two compounds.

Focal Malignant Liver Lesions: Diagnosis by Dynamic Incremental CT, Early Phase

The purpose of our study was to evaluate the accuracy of dynamic incremental bolus-enhanced conventional CT (DICT) with intravenous contrast administration, early phase, in the diagnosis of malignancy of focal liver lesions. A total of 122 lesions were selected in 74 patients considering the following criteria: lesion diameter 10 mm or more, number of lesions less than six per study, except in multiple angiomatosis and the existence of a valid criteria of definitive diagnosis. Lesions were categorized into seven levels of diagnostic confidence of malignancy compared with the definitive diagnosis for acquisition of a receiver-operator-characteristic (ROC) curve analysis and to determine the sensitivity and specificity of the technique. Forty-six and 70 lesions were correctly diagnosed as malignant and benign, respectively; there were 2 false-positive and 4 false-negative diagnoses of malignancy and the sensitivity and specificity obtained were 92 and 97%. The DICT early phase was confirmed as a highly accurate method in the characterization and diagnosis of malignancy of focal liver lesions, requiring an optimal technical performance and judicious analysis of existing semiological data.

Effects of vitamin C supplementation on acute phase Chagas disease in experimentally infected mice with Trypanosoma cruzi QM1 strain

The tissue changes that occur in Chagas disease are related to the degree of oxidative stress and antioxidant capacity of affected tissue. Studies with vitamin C supplementation did not develop oxidative damage caused by Chagas disease in the host, but other studies cite the use of peroxiredoxins ascorbate - dependent on T. cruzi to offer protection against immune reaction. Based on these propositions, thirty "Swiss" mice were infected with T. cruzi QM1 strain and treated with two different vitamin C doses in order to study the parasitemia evolution, histopathological changes and lipid peroxidation biomarkers during the acute phase of Chagas disease. The results showed that the parasite clearance was greater in animals fed with vitamin C overdose. There were no significant differences regarding the biomarkers of lipid peroxidation and inflammatory process or the increase of myocardium in animals treated with the recommended dosage. The largest amount of parasite growth towards the end of the acute phase suggests the benefit of high doses of vitamin C for trypomastigotes. The supplementation doesn't influence the production of free radicals or the number of amastigote nests in the acute phase of Chagas disease.

EXPERIMENTAL INFECTION WITH Toxocara cati IN PIGS: MIGRATORY PATTERN AND PATHOLOGICAL RESPONSE IN EARLY PHASE

Experimental inoculations of approximately 100,000 infective Toxocara cati larval eggs were done in twelve pigs. The T. cati eggs used for inoculation were collected from cat's feces. Another group of three pigs served as an uninfected control. Groups of infected pigs were euthanized at seven, 14, 21, and 28 days post-inoculation (dpi). Tissue samples were taken for digestion and histopathology changes in early phase. The number of larvae recovered from the lungs peaked at seven and 14 dpi and were also present at 21, and 28 dpi. Larvae of T. cati were present in the lymph nodes of the small and large intestine at seven, 14, and 28 dpi and at seven, 14, 21, and 28 dpi respectively. In other studied tissues, no larvae or less than one larva per gram was detected. The pathological response observed in the liver and lungs at seven and 14 dpi, showed white spots on the liver surface and areas of consolidation were observed in the lungs. The lungs showed an inflammatory reaction with larvae in center at 28 dpi. In the liver we observed periportal and perilobular hepatitis. The lymph nodes of the intestines displayed eosinophil lymphadenitis with reactive centers containing parasitic forms in some of them. The granulomatous reaction was not observed in any tissues. The role of the other examined tissues had less significance. The relevance of this parasite as an etiological agent that leads to disease in paratenic hosts is evident.

Artroplastia Unicompartimental do Joelho Oxford Phase 3. Resultados a Médio Prazo

Introdução: A artroplastia unicompartimental evoluiu nos últimos 40 anos, sendo hoje em dia considerada uma estratégia cirúrgica apropriada para a osteoartrose do compartimento interno da articulação do joelho. Desenvolvimentos nos instrumentos cirúrgicos, desenho do implante, abordagem cirúrgica e selecção dos doentes levaram a uma grande melhoria dos resultados pós-operatórios e aumento da longevidade das próteses unicompartimentais do joelho. Comparada com a prótese total, tem como vantagens a preservação óssea, menos complicações pós‐operatórias (perdas sanguíneas, dor pós‐operatória, taxa de infecção, trombose venosa profunda (TVP) e tromboembolismo pulmonar (TEP)), manutenção da normal cinemática do joelho, alta precoce e reabilitação mais rápida. A prótese unicompartimental Oxford phase 3 foi introduzida em 1998 e é uma prótese cimentada com menisco móvel de polietileno. Material e Métodos: Foi realizado um estudo retrospectivo das artroplastias unicompartimentais do joelho Oxford phase 3 realizadas no nosso serviço. Desde 2006 realizaram-se 37 artroplastias unicompartimentais (num total de 34 doentes). Sete dos quais não compareceram à avaliação pós-operatória e por isso foram excluídos do estudo. Todos os doentes incluídos no estudo foram avaliados clínica e radiograficamente. Foram revistos os processos de consulta e do internamento. Registou-se a idade,sexo, classificação ASA (American Society of Anesthesiologists), grau de satisfação, flexão‐extensão actual, Oxford knee score pré e pós‐operatório e alterações radiográficas a salientar. Resultados: O follow‐up médio foi de 47 meses (10 ‐ 83 meses). A idade média dos doentes é de 64 anos, com predomínio do sexo feminino. O ASA médio foi de 2,4. Um dos doentes foi submetido a conversão para artroplastia total do joelho por falência do componente tibial. Há 2 doentes não satisfeitos com a cirurgia (que corresponde aos doentes em que o Oxford knee score piorou). Há 1 doente pouco satisfeito e 23 satisfeitos ou muito satisfeitos. Todos os doentes conseguem fazer extensão completa e a média de flexão é 111º. A média do Oxford knee score pré‐operatório é de 17,4 (5 ‐ 30) e pós‐operatório é 36,6 (11 ‐ 48). Radiologicamente, há uma média de desvio em varo de 1,68º (varo 8º ‐ valgo 5º). Ocorreu artrose femoro‐tibial externa em três casos (dois dos quais também com artrose femoro‐patelar),um caso com slope tibial exagerado (19º), um caso com componente femoral em varo (15º), um caso com componente tibial demasiado grande com protusão interna, um caso de extrusão do menisco de polietileno, um caso com o componente tibial em valgo e um caso com falência deste (descelamento?) com provável necessidade de conversão para artroplastia total. Dos doentes não avaliados não há registo de conversão para artroplastia total do joelho ou outras complicações. Discussão: A larga maioria dos doentes encontram‐se satisfeitos ou muito satisfeitos, havendo uma melhoria do Oxford knee score para mais do dobro. Não se registaram complicações pós‐operatórias imediatas. Das artropastias unicompartimentas realizadas só uma foi convertida para artroplastia total e outra provavelmente a necessitar de conversão, com uma longevidade de 94,6% aos 47 meses (em média). Conclusão: A artroplastia unicompartimental do joelho demonstrou‐se uma excelente opção para doentes com osteoartrose não-inflamatória do compartimento interno do joelho. Para se obterem bons resultados os doentes devem ser criteriosamente seleccionados. Considerando a curva de aprendizagem necessária para o sucesso da cirurgia, a pouca experiência da maioria dos cirurgiões que colocaram as próteses não teve influência nos resultados finais, estando de acordo com a literatura existente, provando que a artroplastia unicompartimental do joelho tem bons resultados clínicos e funcionais. Um maior tempo de follow-up será necessário para se avaliar a longevidade das próteses unicompartimentais.

Projeto de molde para a injeção de peça plástica complexa para a indústria automóvel

A fabricação de moldes é um pilar da indústria metalomecânica nacional. A qualidade patenteada pelos moldes de fabrico nacional é reconhecida mundialmente. A fabricação de um molde é sempre um novo desafio, dadas as especificidades de cada peça e à complexidade geométrica que normalmente apresentam. Este trabalho teve por principal objetivo proceder ao projeto, fabricação e ajuste de um molde para uma peça plástica complexa, destinada à indústria automóvel, a qual, pela sua complexidade geométrica, elevada relação de área versus espessura e grande número de reforços bastante delgados, exige cuidados especiais no momento de se tomarem decisões quanto às melhores metodologias a adotar na sua fabricação, com vista a garantir a qualidade exigida pelo cliente final. O projeto foi desenvolvido e levado a cabo, permitindo constatar que algumas das opções tomadas na fase do projeto foram as mais adequadas, exigindo pouco trabalho de afinação no final e permitindo a extração de peças com elevada repetibilidade de características e a qualidade requerida pelo cliente.