Spatial electric load forecasting using a local movement approach

An agent based model for spatial electric load forecasting using a local movement approach for the spatiotemporal allocation of the new loads in the service zone is presented. The density of electrical load for each of the major consumer classes in each sub-zone is used as the current state of the agents. The spatial growth is simulated with a walking agent who starts his path in one of the activity centers of the city and goes to the limits of the city following a radial path depending on the different load levels. A series of update rules are established to simulate the S growth behavior and the complementarity between classes. The results are presented in future load density maps. The tests in a real system from a mid-size city show a high rate of success when compared with other techniques. The most important features of this methodology are the need for few data and the simplicity of the algorithm, allowing for future scalability. © 2009 IEEE.

Estimativas das radiações direta e difusa em superfícies inclinadas com base na razáo de insolação

Statistical equations were obtained and evaluated with annual, seasonal and monthly data groupings for estimates of direct and diffuse components of solar radiation based on the sunshine duration (ratio of sunshine and photoperiod) incident on horizontal and inclined surfaces to 12.85, 22.85 and 32.85° with facing to North, in Botucatu, SP. The ratios between the two components and radiation at the top of the atmosphere were used, in a database whose inclinations were measured in three different periods (22.85°: 04/1998 to 07/2001; 12.85°: 08/2011 to 02/2003; and 32.85°: 03/2003 to 12/2007) and concomitant with horizontal measures and sunshine duration. The correlations showed a linear and second degree polynomial behavior for the direct and diffuse radiation, with higher coefficients of determination in periods of low variation in the coverage of the sky (cloudiness). The highest values of the direct and diffuse radiation were found in winter and summer, respectively for all surfaces evaluated. The increase in the inclination angle decreased the performance of equations in all groups of data with increase in scattering and decrease in index of the adjustment, however, the monthly equations allowed better performance for the two components.

Assembling a xylanase-lichenase chimera through all-atom molecular dynamics simulations

Multifunctional enzyme engineering can improve enzyme cocktails for emerging biofuel technology. Molecular dynamics through structure-based models (SB) is an effective tool for assessing the tridimensional arrangement of chimeric enzymes as well as for inferring the functional practicability before experimental validation. This study describes the computational design of a bifunctional xylanase-lichenase chimera (XylLich) using the xynA and bglS genes from Bacillus subtilis. In silico analysis of the average solvent accessible surface area (SAS) and the root mean square fluctuation (RMSF) predicted a fully functional chimera, with minor fluctuations and variations along the polypeptide chains. Afterwards, the chimeric enzyme was built by fusing the xynA and bglS genes. XylLich was evaluated through small-angle X-ray scattering (SAXS) experiments, resulting in scattering curves with a very accurate fit to the theoretical protein model. The chimera preserved the biochemical characteristics of the parental enzymes, with the exception of a slight variation in the temperature of operation and the catalytic efficiency (k cat/Km). The absence of substantial shifts in the catalytic mode of operation was also verified. Furthermore, the production of chimeric enzymes could be more profitable than producing a single enzyme separately, based on comparing the recombinant protein production yield and the hydrolytic activity achieved for XylLich with that of the parental enzymes. © 2013 Elsevier B.V. All rights reserved.

Avaliação de discos de corte de semeadora-adubadora em diferentes quantidades de cobertura vegetal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito das condições de congelamento sobre atributos de qualidade de fatias de abacaxi liofilizado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de diferentes doses de salinidade e níveis de água na produção de cenoura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Finanças comportamentais e modelos baseados em agentes

Pós-graduação em Economia - FCLAR

Adubação orgânica e nitrogenada em videira cv. syrah no vale do submédio São Francisco

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Entre a teoria e a prática: o projeto político-pedagógico do curso de medicina da UFMA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho do abacaxizeiro cultivar Smooth Cayenne submetido a duas frequências e quatro lâminas de irrigação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistemas de resfriamento evaporativo-adsortivo aplicados ao condicionamento de ar

Pós-graduação em Engenharia Mecânica - FEG

Interaction between GIS and hydrologic model: a preliminary approach using ArcHydro Framework Data Model

In different regions of Brazil, population growth and economic development can degrade water quality, compromising watershed health and human supply. Because of its ability to combine spatial and temporal data in the same environment and to create water resources management (WRM) models, the Geographical Information System (GIS) is a powerful tool for managing water resources, preventing floods and estimating water supply. This paper discusses the integration between GIS and hydrological models and presents a case study relating to the upper section of the Paraíba do Sul Basin (Sao Paulo State portion), situated in the Southeast of Brazil. The case study presented in this paper has a database suitable for the basin's dimensions, including digitized topographic maps at a 50,000 scale. From an ArcGIS®/ArcHydro Framework Data Model, a geometric network was created to produce different raster products. This first grid derived from the digital elevation model grid (DEM) is the flow direction map followed by flow accumulation, stream and catchment maps. The next steps in this research are to include the different multipurpose reservoirs situated along the Paraíba do Sul River and to incorporate rainfall time series data in ArcHydro to build a hydrologic data model within a GIS environment in order to produce a comprehensive spatial-temporal model.

Respostas da frequência de braçada e do comprimento de braçada na e acima da intensidade correspondente à máxima fase estável de lactato sanguíneo em indivíduos com diferentes níveis de performance

The main objective of this study was to analyze the behavior of variables related to swim ability at and above maximal lactate steady state (MLSS), performed at continuous and intermittent conditions in individuals with different aerobic performance levels. Participated of this study male swimmers with ages between 20 to 25 years, specialists in events of 400 m, 800 m and 1500 m and open water swims, with at least 3 years of experience in the modality. The individuals performed a maximal 400-m swim test. After this test, they were divided into two groups, in accordance with the speed attained during 400-m swim test: G1 (higher performance) and G2 (lower performance). For the determination of continuous MLSS (MLSSc), 2 to 4 trials of 30-min were performed. For the determination of the intermittent MLSS (MLSSi) 2 to 4 trials of 30-min (12 repetitions of 2 min 30 s, with 30 s of rest) were performed, in constant speed, with the first trial performed at 102.5% MLSSc. Th technical indexes, stroke rate (FB) and stroke length (CB) were determined in all tests. The SR was calculated trough recordings using the time needed to perform five stroke cycles. The SL was calculated dividing the speed by the SR. There was no significant difference on the antropometric characteristics between groups. The speed at and above MLSSc were significantly higher at G1 (1,23±0,05 e 1,27±0,06, respectively) than G2 (1,10±0,06 e 1,13±0,06, respectively). There was significant change in SL and SR in G2. In the same way, there was significant change in SL and SR only in G2, above MLSSc. Similar to continuous condition, the speeds at and above MLSSi were significantly higher in G1 (1,27±0,05 e 1,30±0,05, respectively) do que no G2 (1,14±0,07 e 1,16±0,07, respectively). There was significant change in SL and SR only in G2. There was significant change in SR and SL in both groups above MLSSi. Thus,...(Complete abstract click electronic access below)

Monitoramento espacial e análise das características climáticas na influência sobre a cultura de soja no estado do Paraná

In the past years, soya has increased itself as the mean agro export culture in Brazil, encouraging the expansion of its agricultural frontier throughout the country. Brazil is the second biggest soya producer around the world, with a 59,8 million ton production in 2008, according to the Instituto Brasileiro de Geografia e Estatística (IBGE), only behind United States. Around the country, the four leading producer states are Mato Grosso, Paraná, Rio Grande do Sul e Goiás. Therefore, geotechnologies may be used to monitor use and soil occupation in various analyzes periods. In this review, the tools are important to illustrate the soya production areas and also the weather behavior around its production evolution in the territory through the years. Its utilization can contribute to the evolution and optimization around real time monitoring of the Agricola cultures, without being necessary to be in the area with a low financial cost. Generally, this information is strongly important for decision makers in both government and private sector, as soon as the achievement information regards the quantification of area, yield and development of agricultural crops are essential to the economic behavior of culture during the season and even beyond. By obtaining data regarding climate crops 2008/09 and 2009/10, held the climatic water balance calculation based on the dynamics of water storage in soil temperature and precipitation data, interpolation of the data through the interpolator (IDW) that generated thematic precipitation maps. Overall, the use of geotechnology to monitor agricultural areas, can strongly contribute to this monitoring, generating raw material for further analysis at low cost

Parceria para Governo Aberto e Relações Internacionais: oportunidades e desafios

Pós-graduação em Relações Internacionais (UNESP - UNICAMP - PUC-SP) - FFC