Viabilidad de la aplicación de materiales reciclados y cenizas de biomasa en la fabricación de materiales tratados con cemento

La presente Tesis Doctoral es una contribución al conocimiento y la investigación sobre el uso de áridos reciclados y cenizas de fondo procedentes de la combustión de biomasa para su uso en ingeniería civil. El interés en el uso de áridos reciclados procedentes de residuos de construcción y demolición (RCD) están en continuo crecimiento debido a su potencial frente a diversos usos, entre ellos como material tratado con cemento para capas estructurales de carretera. Por otro lado, la producción de energía eléctrica a partir de centrales termoeléctricas que emplean biomasa como combustible, origina principalmente dos residuos: Cenizas de fondo (CF) formadas por el material total o parcialmente quemado y cenizas volantes (CV), partículas arrastradas por la corriente de gases al exterior de la cámara de combustión. En el desarrollo de este trabajo, se evaluó en una primera etapa, el comportamiento físico, químico y mecánico de diferentes mezclas de materiales granulares reciclados tratados con cemento, con diferentes contenidos de sulfato y de esta manera poder establecer protocolos de aplicación en la fabricación de suelocemento. Posteriormente, se analizo la viabilidad técnica de las cenizas de fondo de biomasa de varias plantas de energía andaluzas y de esta manera, evaluar su potencial uso en obras de infraestructura civil. Se determinó que las cenizas de fondo biomasa poseen propiedades aceptables para ser utilizados como un material de relleno en el núcleo de terraplenes de carreteras de más de 5 m en altura sin medidas de precaución adicionales. Por último, se estudio la posibilidad de incorporar, en proporciones determinadas, cenizas de fondo de biomasa en diferentes mezclas con árido natural y árido reciclado para su uso en ingeniería civil, concretamente como suelocemento para base y subbase de carreteras. El análisis de las propiedades mecánicas fue muy positivo. Las características físicas, químicas y mecánicas han sido estudiadas de acuerdo a la normativa vigente, y los parámetros han sido comparados con las especificaciones técnicas impuestas por la regulación española. La concepción del residuo como recurso para incorporarlo de nuevo al sistema productivo es un reto clave y una obligación y la principal motivación para el desarrollo de la presente Tesis Doctoral. Por ello, la correcta gestión de estos subproductos industriales, es esencial para evitar los impactos negativos sobre los ecosistemas, la biodiversidad y la salud humana, sin olvidar el beneficio económico que supone esta práctica.

MULTI-UNIT ACCIDENT CONTRIBUTIONS TO U.S. NUCLEAR REGULATORY COMMISSION QUANTITATIVE HEALTH OBJECTIVES: A SAFETY GOAL POLICY ANALYSIS USING MODELS FROM STATE-OF-THE-ART REACTOR CONSEQUENCE ANALYSES

The U.S. Nuclear Regulatory Commission implemented a safety goal policy in response to the 1979 Three Mile Island accident. This policy addresses the question “How safe is safe enough?” by specifying quantitative health objectives (QHOs) for comparison with results from nuclear power plant (NPP) probabilistic risk analyses (PRAs) to determine whether proposed regulatory actions are justified based on potential safety benefit. Lessons learned from recent operating experience—including the 2011 Fukushima accident—indicate that accidents involving multiple units at a shared site can occur with non-negligible frequency. Yet risk contributions from such scenarios are excluded by policy from safety goal evaluations—even for the nearly 60% of U.S. NPP sites that include multiple units. This research develops and applies methods for estimating risk metrics for comparison with safety goal QHOs using models from state-of-the-art consequence analyses to evaluate the effect of including multi-unit accident risk contributions in safety goal evaluations.

Comando e Controlo na Artilharia Antiaérea

O presente trabalho, subordinado à temática “Comando e Controlo na Artilharia Antiaérea”, pretende problematizar algumas das questões mais recentes relativas a matérias de segurança e defesa, fruto dos mais recentes acontecimentos. Por exemplo, refira-se o abate do voo comercial na Ucrânia, entre outros inúmeros casos que se constituem como fatores que levam a questionar a capacidade de defesa dos Estados face ao fácil acesso e baixo custo destes meios, à mercê de pessoas/organizações criminosas e terroristas. Assim, é premente a necessidade de aquisição, por parte dos Estados, nomeadamente de Portugal, de uma Artilharia mais robusta e com um sistema de Comando e Controlo automático capaz de combater as potenciais e prováveis ameaças aéreas. Esta investigação pretende, então, analisar o atual sistema de Comando e Controlo da Artilharia Antiaérea nacional, por forma a identificar as suas capacidades e, em paralelo, as suas vulnerabilidades. Concomitantemente pretende-se analisar o sistema perante as ameaças aéreas e as operações que deverá executar no âmbito dos compromissos internacionais, com o objetivo fulcral de identificar prováveis potencialidades que deverão integrar o referido sistema. Pretende-se, deste modo, propor uma revisão do atual sistema no sentido de colmatar as suas prováveis lacunas e capacitando-o para uma resposta eficaz e efetiva perante eventuais ameaças, na esteira dos compromissos internacionais. No início apresentamos uma ‘revisão de literatura’ para que o leitor se familiarize com os conceitos e nomenclatura em uso nesta reflexão. Subsequentemente, expõe-se a metodologia empregue e são abordados os sistemas de Defesa Aérea e de Artilharia Antiaérea e, posteriormente, o Comando e Controlo. De seguida, apresenta-se uma análise possível dos dados provenientes das entrevistas executadas. Baseando-nos na investigação realizada, conclui-se que a Artilharia Antiaérea corre o risco sério de não dispor de capacidade de defesa, a baixa e muito baixa altitude, se não forem adquiridos rapidamente os materiais imprescindíveis para que os sistemas possam cabalmente atuar.

Induction of Microalgal Lipids for Biodiesel Production in Tandem with Sequestration of High Carbon Dioxide Concentration

There is no doubt that sufficient energy supply is indispensable for the fulfillment of our fossil fuel crises in a stainable fashion. There have been many attempts in deriving biodiesel fuel from different bioenergy crops including corn, canola, soybean, palm, sugar cane and vegetable oil. However, there are some significant challenges, including depleting feedstock supplies, land use change impacts and food use competition, which lead to high prices and inability to completely displace fossil fuel [1-2]. In recent years, use of microalgae as an alternative biodiesel feedstock has gained renewed interest as these fuels are becoming increasingly economically viable, renewable, and carbon-neutral energy sources. One reason for this renewed interest derives from its promising growth giving it the ability to meet global transport fuel demand constraints with fewer energy supplies without compromising the global food supply. In this study, Chlorella protothecoides microalgae were cultivated under different conditions to produce high-yield biomass with high lipid content which would be converted into biodiesel fuel in tandem with the mitigation of high carbon dioxide concentration. The effects of CO2 using atmospheric and 15% CO2 concentration and light intensity of 35 and 140 µmol m-2s-1 on the microalgae growth and lipid induction were studied. The approach used was to culture microalgal Chlorella protothecoides with inoculation of 1×105 cells/ml in a 250-ml Erlenmeyer flask, irradiated with cool white fluorescent light at ambient temperature. Using these conditions we were able to determine the most suitable operating conditions for cultivating the green microalgae to produce high biomass and lipids. Nile red dye was used as a hydrophobic fluorescent probe to detect the induced intracellular lipids. Also, gas chromatograph mass spectroscopy was used to determine the CO2 concentrations in each culture flask using the closed continuous loop system. The goal was to study how the 15% CO2 concentration was being used up by the microalgae during cultivation. The results show that the condition of high light intensity of 140 µmol m-2s-1 with 15% CO2 concentration obtain high cell concentration of 7 x 105 cells mL-1 after culturing Chlorella protothecoides for 9 to 10 day in both open and closed systems respectively. Higher lipid content was estimated as indicated by fluorescence intensity with 1.3 to 2.5 times CO2 reduction emitted by power plants. The particle size of Chlorella protothecoides increased as well due to induction of lipid accumulation by the cells when culture under these condition (140 µmol m-2s-1 with 15% CO2 concentration).

Analyzing the Effect of Soiling on the Performance of a Photovoltaic System of Different Module Technologies in Kalkbult, South Africa

The fact that most of the large scale solar PV plants are built in arid and semi-arid areas where land availability and solar radiation is high, it is expected the performance of the PV plants in such locations will be affected significantly due to high cell temperature as well as due to soiling. Therefore, it is essential to study how the different PV module technologies will perform in such geographical locations to ensure a consistent and reliable power delivery over the lifetime of the PV power plants. As soiling is strongly dependent on the climatic conditions of a particular location a test station, consisted of about 24 PV modules and a well-equipped weather station, was built within the fences of Scatec’s 75 MW Kalkbult solar PV plant in South Africa. This study was performed to a better understand the effect of soiling by comparing the relative power generation by the cleaned modules to the un-cleaned modules. Such knowledge can enable more quantitative evaluations of the cleaning strategies that are going to be implemented in bigger solar PV power plants. The data collected and recorded from the test station has been analyzed at IFE, Norway using a MatLab script written for this thesis project. This thesis work has been done at IFE, Norway in collaboration with Stellenbosch University in South Africa and Scatec Solar a Norwegian independent power producer company. Generally for the polycrystalline modules it is found that the average temperature corrected efficiency during the period of the experiment has been 15.00±0.08 % and for the thin film-CdTe with ARC is 11.52% and for the thin film without ARC is about 11.13% with standard uncertainty of ±0.01 %. Besides, by comparing the initial relative average efficiency of the polycrystalline-Si modules when all the modules have been cleaned for the first time and the final relative efficiency; after the last cleaning schedule which is when all the reference modules E, F, G, and H have been cleaned for the last time it is found that poly3 performs 2 % and 3 % better than poly1 and poly16 respectively, poly13 performs 1 % better than poly15 as well as poly5 and poly12 performs 1 % and 2 % better than poly10 respectively. Besides, poly5 and poly12 performs a 9 % and 11 % better than poly7. Furthermore, there is no change in performance between poly6 and poly9 as well as poly4 and poly15. However, the increase in performance of poly3 to poly1, poly13 to poly15 as well as poly5 and poly12 to poly10 is insignificant. In addition, it is found that TF22 perform 7% better than the reference un-cleaned module TF24 and similarly; TF21 performs 7% higher than TF23. Furthermore, modules with ARC glass (TF17, TF18, TF19, and TF20) shows that cleaning the modules with only distilled water (TF19) or dry-cleaned after cleaned with distilled water(TF20) decreases the performance of the modules by 5 % and 4 % comparing to its respective reference uncleanedmodules TF17 and TF18 respectively.

Progress

The Savannah Valley Authority publishes this quarterly newsletter giving an update on various projects, meetings and developments going on in the Savannah Valley Region. This issue covers among other things, Savannah Lakes Village, Lake Russell Project, utility planning and lake levels.

Progress

The Savannah Valley Authority publishes this quarterly newsletter giving an update on various projects, meetings and developments going on in the Savannah Valley Region. This issue covers among other things, Savannah Lakes Village progress, gold mining, Georgia South Carolina development groups and a freshwater coast promotion.

Progress

The Savannah Valley Authority publishes this quarterly newsletter giving an update on various projects, meetings and developments going on in the Savannah Valley Region. This issue covers among other things, the Russell Project land appraisals, Savannah Lakes Village, wastewater treatment needs and regional grants.

Vanadium Redox Flow Battery Storage System Linked to the Electric Grid

This paper focuses on technology state of the art for the charge/discharge of electric energy storage supported by vanadium redox flow battery linked to the electric grid. Properties of vanadium, the main configuration and the reaction of charge/discharge of a vanadium redox flow battery are addressed. The vanadium redox flow battery has the highest cell voltage among the other redox flow battery, implying higher power and energy density which favours application at power plants. This electric energy storage is viewed as a promising contribution to be integrated in power system due to a reasonably bulky size and to successful applications currently allowing storage of energy at power plants or at electrical grids. For instances, allowing storage of energy as an economic improvement providing spin reserve to avoid penalty for imbalances between the energy delivered and energy contracted at closing of electricity market or as an economic improvement to diminish the cost of electricity usage of a consumer. The vanadium redox flow battery has the advantages of scalability customized to meet requirements for power and energy capacity and of excellent combination of energy efficiency, capital cost and life cycle costs compared with other technology.

Cost assessment of efficiency losses in hydroelectric plants

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Information processing without brains--the power of intercellular regulators in plants.

Plants exhibit different developmental strategies than animals; these are characterized by a tight linkage between environmental conditions and development. As plants have neither specialized sensory organs nor a nervous system, intercellular regulators are essential for their development. Recently, major advances have been made in understanding how intercellular regulation is achieved in plants on a molecular level. Plants use a variety of molecules for intercellular regulation: hormones are used as systemic signals that are interpreted at the individual-cell level; receptor peptide-ligand systems regulate local homeostasis; moving transcriptional regulators act in a switch-like manner over small and large distances. Together, these mechanisms coherently coordinate developmental decisions with resource allocation and growth.

Electric Power Service Areas, Energy Lines, and Hydroelectric Dams of Maine

http://digitalcommons.colby.edu/atlasofmaine2008/1010/thumbnail.jpg

Economic aspects of combining thermal and hydroelectric plants

Includes bibliography

Evaluation of a potential hydroelectric project as an addition to an existing power system

Includes bibliography