Revisiting the lean agile paradigm:an empirical study in the aerospace industry

Much has been written about the potential impact of Lean Agile paradigm on firm's supply chain performance. However, most of the existing studies mainly pointed out Lean is for cost reduction, whereas Agility is for attaining flexibility. There are little empirical studies in literature that examined how Lean Agile paradigm impacts on supply chain performance. This paper aims to address this gap by studying the influence of Lean and Agility paradigms on a single commodity supply chain delivery performance in the aerospace industry. Data was collected from four separate 'Rigid pipes' supply chains to study how manufacturing alignment impacts on the delivery performance. Implications of the study to practitioners and academia are discussed and future research outlined.

A Conceptual Foresight Model to Investigate the Adoption of Radio Frequency Identification Technology in the English National Health Service

Radio Frequency Identification Technology (RFID) adoption in healthcare settings has the potential to reduce errors, improve patient safety, streamline operational processes and enable the sharing of information throughout supply chains. RFID adoption in the English NHS is limited to isolated pilot studies. Firstly, this study investigates the drivers and inhibitors to RFID adoption in the English NHS from the perspective of the GS1 Healthcare User Group (HUG) tasked with coordinating adoption across private and public sectors. Secondly a conceptual model has been developed and deployed, combining two of foresight’s most popular methods; scenario planning and technology roadmapping. The model addresses the weaknesses of each foresight technique as well as capitalizing on their individual, inherent strengths. Semi structured interviews, scenario planning workshops and a technology roadmapping exercise were conducted with the members of the HUG over an 18-month period. An action research mode of enquiry was utilized with a thematic analysis approach for the identification and discussion of the drivers and inhibitors of RFID adoption. The results of the conceptual model are analysed in comparison to other similar models. There are implications for managers responsible for RFID adoption in both the NHS and its commercial partners, and for foresight practitioners. Managers can leverage the insights gained from identifying the drivers and inhibitors to RFID adoption by making efforts to influence the removal of inhibitors and supporting the continuation of the drivers. The academic contribution of this aspect of the thesis is in the field of RFID adoption in healthcare settings. Drivers and inhibitors to RFID adoption in the English NHS are compared to those found in other settings. The implication for technology foresight practitioners is a proof of concept of a model combining scenario planning and technology roadmapping using a novel process. The academic contribution to the field of technology foresight is the conceptual development of foresight model that combines two popular techniques and then a deployment of the conceptual foresight model in a healthcare setting exploring the future of RFID technology.

Environmental Management Accounting - Estimating the Benefit Side

The presentation focuses on estimating benefits of environmental projects and achievements like image improvement, gaining an environmental award, profit from environmentally benign products, risk reduction benefits, etc. The paper integrates the results and experience gained in three different fields: EMA, evaluation of natural resources and working as a consultant

Az ellátási lánc tudatos folyamat- és kockázatmenedzsmentjének hatás a teljesítményre

Az ellátási lánc menedzsmentje jól ismert és régóta tanulmányozott területe a menedzsment tudománynak. Jelen tanulmány célja, hogy egy olyan modell létezését igazolja, amely szerint egy ellátási láncban az információ menedzsmentje, az anyagi áramlások koordinációja és költségek és a teljesítmény kontrollja elengedhetetlen a teljes lánc magas szintű teljesítményéhez, és ezt a kockázatmenedzsment eszközök alkalmazásával tovább lehet növelni. Az ellátási lánc menedzsment eszközök támogatják a partnerek közötti információ megosztást (pl. EDI), az anyagi áramlások kisimítását (pl. folyamatos feltöltés, cross-docking). A költség és teljesítmény menedzsment eszközök alkalmazásának célja pedig hogy feltárják, hogy a költségek és hasznok miként oszlanak meg, merülnek fel az egyes ellátási lánc szereplők között. Ezeket az eszközöket akár vállalati, akár ellátási lánc szinten alkalmazzák, a végső cél a teljes ellátási lánc teljesítményének a növelése. Az ellátási lánc teljesítményét úgy határozzuk meg, mint az érték, amely a végső vevő számára keletkezett valamint a profit, amit az ellátási lánc partnerek realizáltak. Habár a vállalatok és az ellátási láncok különféle eszközöket alkalmazhatnak, hogy menedzseljék különböző folyamataikat, az a mód, ahogy szembenéznek a felmerülő kockázatokkal – fakadjanak akár a rendszerből magából, vagy a környezetből - és kezelik azokat, alapvető hatással bír a végső teljesítményre, így a versenyképességre is. A bemutatott kutatási modellel azt a kapcsolatot szeretnénk igazolni, amely feltevéseink szerint az ellátási láncban alkalmazott, a különféle alapfolyamatok menedzsmentjére valamint a kockázat menedzsmentjére használt eszközök és a realizált teljesítmény között van. _______ Supply chain management is a well-known and intensely studied field of management science. Our aim is to construct and test a model which summarises that besides the tools adapted to manage information flow, materials flow and costs and performance in supply chains to achieve high overall performance, managing risks is also inevitable. Supply chain management tools are to improve the efficiency of information sharing between supply chain participants (e.g. EDI) and to smooth materials flow carried out by the parties in collaboration (e.g. continuous replenishment, cross-docking). Cost management and performance assessment tools aim to explore the costs and profit realised by the cooperating companies as well as the entire supply chain. All the tools adapted either at a company or on supply chain level, strive to enhance the overall performance of the supply chain. The performance of a supply chain can be assessed by the value created for the end consumer and by the profit the partners realise. However, companies and supply chains adopt tools to manage the different flows, the way they face and handle risks coming either from the system or from the surrounding environment have a key influence on the performance achieved and consequently on competitiveness, too. When constructing the research model we try to find and verify the linkage between the tools supply chains use for coordination and for managing risks and the performance achieved.

A methodology to select an enterprise resource planning system for a small or medium sized enterprise

Enterprise Resource Planning (ERP) systems are software programs designed to integrate the functional requirements, and operational information needs of a business. Pressures of competition and entry standards for participation in major manufacturing supply chains are creating greater demand for small business ERP systems. The proliferation of new offerings of ERP systems introduces complexity to the selection process to identify the right ERP business software for a small and medium-sized enterprise (SME). The selection of an ERP system is a process in which a faulty conclusion poses a significant risk of failure to SME’s. The literature reveals that there are still very high failure rates in ERP implementation, and that faulty selection processes contribute to this failure rate. However, the literature is devoid of a systematic methodology for the selection process for an ERP system by SME’s. This study provides a methodological approach to selecting the right ERP system for a small or medium-sized enterprise. The study employs Thomann’s meta-methodology for methodology development; a survey of SME’s is conducted to inform the development of the methodology, and a case study is employed to test, and revise the new methodology. The study shows that a rigorously developed, effective methodology that includes benchmarking experiences has been developed and successfully employed. It is verified that the methodology may be applied to the domain of users it was developed to serve, and that the test results are validated by expert users and stakeholders. Future research should investigate in greater detail the application of meta-methodologies to supplier selection and evaluation processes for services and software; additional research into the purchasing practices of small firms is clearly needed.^

Habitat use and foraging ecology of a batoid community in Shark Bay, Western Australia

Worldwide declines in populations of large elasmobranchs and the potential cascading effects on marine ecosystems have garnered considerable attention. Far less appreciated are the potential ecological impacts of changes in abundances of small to medium bodied elasmobranchs mesopredators. Crucial to elucidating the role of these elasmobranchs is an understanding of their habitat use and foraging ecology in pristine conditions. I investigated the trophic interactions and factors driving spatiotemporal variation in abundances of elasmobranch mesopredators in the relatively pristine ecosystem of Shark Bay, Australia. First, I describe the species composition and seasonal habitat use patterns of elasmobranch mesopredator on the sandflats of Shark Bay. Juvenile batoids dominated this diverse community and were extremely abundant in nearshore microhabitats during the warm season. Stomach content analysis and stable isotopic analysis revealed that there is a large degree of dietary overlap between common batoid species. Crustaceans, which tend to be found in seagrass habitats, dominated diets. Despite isotopic differences between many species, overlap in isotopic niche space was high and there was some degree of individual specialization. I then, investigated the importance of abiotic (temperature and water depth) and biotic (prey and predator abundance) factors in shaping batoid habitat use. Batoids were most abundant and tended to rest in shallow nearshore waters when temperatures were high. This pattern coincides with periods of large shark abundance suggesting batoids were seeking refuge from predators rather than selecting optimal temperatures. Finally, I used acoustic telemetry to examine batoid residency and diel use of the sandflats. Individual batoids were present on the sandflats during both the warm and cold seasons and throughout the diel cycle, suggesting lower sandflat densities during the cold season were a result of habitat shifts rather than migration out of Shark Bay. Combined, habitat use and dietary results suggest that batoids have the potential to seasonally impact sandflat dynamics through their presence, although foraging may be limited on the sandflats. Interestingly, my results suggest that elasmobranch mesopredators in pristine ecosystems probably are not regulated by food supply and their habitat use patterns and perhaps ecosystem impacts may be influenced by their predators.

Branch and price solution approach for order acceptance and capacity planning in make -to -order operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. ^ For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver.^ The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. ^ The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.^

Branch and Price Solution Approach for Order Acceptance and Capacity Planning in Make-to-Order Operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver. The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.

Data compilation on the biological response to ocean acidification: environmental and experimental context of data sets and related literature

The exponential growth of studies on the biological response to ocean acidification over the last few decades has generated a large amount of data. To facilitate data comparison, a data compilation hosted at the data publisher PANGAEA was initiated in 2008 and is updated on a regular basis (doi:10.1594/PANGAEA.149999). By January 2015, a total of 581 data sets (over 4 000 000 data points) from 539 papers had been archived. Here we present the developments of this data compilation five years since its first description by Nisumaa et al. (2010). Most of study sites from which data archived are still in the Northern Hemisphere and the number of archived data from studies from the Southern Hemisphere and polar oceans are still relatively low. Data from 60 studies that investigated the response of a mix of organisms or natural communities were all added after 2010, indicating a welcomed shift from the study of individual organisms to communities and ecosystems. The initial imbalance of considerably more data archived on calcification and primary production than on other processes has improved. There is also a clear tendency towards more data archived from multifactorial studies after 2010. For easier and more effective access to ocean acidification data, the ocean acidification community is strongly encouraged to contribute to the data archiving effort, and help develop standard vocabularies describing the variables and define best practices for archiving ocean acidification data.

(Appendix B) Benthic foraminifera in Indian Ocean surface sediments

Multivariate analysis was performed on percentages of 46 species of unstained deep-sea benthic foraminifera from 131 core-top to near-core-top samples (322-5013 m) from across the Indian Ocean. Faunal data are combined with GEOSECS geochemical data to investigate any relationship between benthic foraminifera (assemblages and species) and deep-sea properties. In general, benthic foraminifera show a good correlation to surface productivity, organic carbon flux to the sea floor, deep-sea oxygenation and, to a lesser extent, to bottom temperature, without correlation with the water depths. The foraminiferal census data combined with geochemical data has enabled the division of the Indian Ocean into two faunal provinces. Province A occupies the northwestern Indian Ocean (Arabian Sea region) where surface primary production has a major maximum during the summer monsoon season and a secondary maximum during winter monsoon season that leads to high organic flux to the seafloor, making the deep-sea one of the most oxygen-deficient regions in the world ocean, with a pronounced oxygen minimum zone (OMZ). This province is dominated by benthic foraminifera characteristic of low oxygen and high organic food flux including Uvigerina peregrina, Robulus nicobarensis, Bolivinita pseudopunctata, Bolivinita sp., Bulimina aculeata, Bulimina alazanensis, Ehrenbergina carinata and Cassidulina carinata. Province B covers southern, southeastern and eastern parts of the Indian Ocean and is dominated by Nuttallides umbonifera, Epistominella exigua, Globocassidulina subglobosa, Uvigerina proboscidea, Cibicides wuellerstorfi, Cassidulina laevigata, Pullenia bulloides, Pullenia osloensis, Pyrgo murrhina, Oridorsalis umbonatus, Gyroidinoides (= Gyroidina) soldanii and Gyroidinoides cf. gemma suggesting well-oxygenated, cold deep water with low (oligotrophic) and pulsed food supply.

Ostracode relative abundances and geochemistry in surface sediments from Lake Ohrid

Understanding the ecology of bioindicators such as ostracods is essential in order to reconstruct past environmental and climate change from analysis of fossil assemblages preserved in lake sediment cores. Knowledge of the ecology of ancient Lake Ohrid's ostracod fauna is very limited and open to debate. In advance of the Ohrid ICDP-Drilling project, which has potential to generate high-resolution long-term paleoenvironmental data of global importance in paleoclimate research, we sampled Lake Ohrid and a wide range of habitat types in its surroundings to assess 1) the composition of ostracod assemblages in lakes, springs, streams, and short-lived seasonal water bodies, 2) the geographical distribution of ostracods, and 3) the ecological characteristics of individual ostracod species. In total, 40 species were collected alive, and seven species were preserved as valves and empty carapaces. Of the 40 ostracod species, twelve were endemic to Lake Ohrid. The most common genus in the lake was Candona, represented by 13 living species, followed by Paralimnocythere, represented by five living species. The most frequent species was Cypria obliqua. Species with distinct distributions included Heterocypris incongruens, Candonopsis kingsleii, and Cypria lacustris. The most common species in shallow, flooded areas was H. incongruens, and the most prominent species in ditches was C. kingsleii. C. lacustris was widely distributed in channels, springs, lakes, and rivers. Statistical analyses were performed on a "Lake Ohrid" dataset, comprising the subset of samples from Lake Ohrid alone, and an "entire" dataset comprising all samples collected. The unweighted pair group mean average (UPGMA) clustering was mainly controlled by species-specific depth preferences. Canonical Correspondence Analysis (CCA) with forward selection identified water depth, water temperature, and pH as variables that best explained the ostracod distribution in Lake Ohrid. The lack of significance of conductivity and dissolved oxygen in CCA of Ohrid data highlight the uniformity across the lake of the well-mixed waters. In the entire area, CCA revealed that ostracod distribution was best explained by water depth, salinity, conductivity, pH, and dissolved oxygen. Salinity was probably selected by CCA due to the presence of Eucypris virens and Bradleystrandesia reticulata in short-lived seasonal water bodies. Water depth is an important, although indirect, influence on ostracod species distribution which is probably associated with other factors such as sediment texture and food supply. Some species appeared to be indicators for multiple environmental variables, such as lake level and water temperature.

Weighted mean depth of zooplankton measured during various cruises to the Baltic Sea

The Baltic Sea is the largest brackish water area of the world. On the basis of the data from 16 cruises, we show the seasonal and vertical distribution patterns of the appendicularians Fritillaria borealis, Oikopleura dioica and the cyclopoid copepod Oithona similis, in the highly stratified Bornholm Basin. These species live at least temporarily below the permanent halocline and use different life strategies to cope with the brackish environment. The cold-water species F. borealis is abundant in the upper layers of the water column before the thermocline develops. With the formation of the thermocline abundance decreases and the specimens outlast higher temperatures below the halocline. Distribution and strategy suggest that F. borealis might be a glacial relict species in the Baltic Sea. Although Oikopleura dioica is only abundant during summer, O. similis is present all year round. Both species have in common that their vertical distribution is restricted to the waters below the halocline, most likely due to their requirements of higher salinities. We argue that the observed strategies are determined by ecophysiological constraints and life history traits. These species share an omnivorous feeding behaviour and the capability to utilise a spectra of small particles as food. As phytoplankton concentration is negligible below the halocline, we suggest that these species feed on organic material and heterotrophic organisms that accumulate in the density gradient of the halocline. Therefore, the deep haline waters in the Baltic Sea represent a habitat providing shelter from predation and food supply for adapted species that allows them to gather sufficient resources and to maintain populations.

Institutions, Innovation, and Grassroots Change: Alternatives to Transnational Governance in the Global South

Transnational governance has been advanced as a viable option for regulating commodities produced in emerging economies—where incapable or unwilling states may undersupply institutions requisite for overseeing supply chains consistent with the quality, safety, environmental, or social standards demanded by the global marketplace. Producers from these jurisdictions, otherwise left with few venues for securing market access and price premiums, ostensibly benefit from whatever pathways transnational actors offer to minimize barriers to entry—including voluntary certification for compliance with a panoply of public and private rules, such as those promulgated by NGOs like the Fair Trade Federation or multinational retailers like Wal-Mart. Yet, such transnational “sustainability” governance may neither be effective nor desirable. Regulatory schemes, like third-party certification, often privilege the interests of primary architects and beneficiaries—private business associations, governments, NGOs, and consumers in the global North—over regulatory targets—producers in the global South. Rather than engaging with the international marketplace via imported and externally-driven schemes, some producer groups are instead challenging existing rules and innovating homegrown institutions. These alternatives to commercialization adopt some institutional characteristics of their transnational counterparts yet deliver benefits in a manner more aligned with the needs of producers. Drawing on original empirical cases from Nicaragua and Mexico, this dissertation examines the role of domestic institutional alternatives to transnational governance in enhancing market access, environmental quality and rural livelihoods within producer communities. Unlike the more technocratic and expert-driven approaches characteristic of mainstream governance efforts, these local regulatory institutions build upon the social capital, indigenous identity, “ancestral” knowledge, and human assets of producer communities as new sources of power and legitimacy in governing agricultural commodities.

L’accès aux ressources alimentaires : facteurs prédicteurs de l’insécurité alimentaire sévère parmi les ménages bénéficiers des programmes communautaires en sécurité alimentaire à Montréal

Objectif : Examiner la relation entre l’accès aux ressources alimentaires et le degré de l’insécurité alimentaire du ménage parmi les nouveaux utilisateurs des organismes communautaires d’intervention en sécurité alimentaire de Montréal. Méthode : Étude observationnelle transversale. Elle consiste en une analyse secondaire de données (n=785) qui proviennent du premier temps de mesure de l’enquête sur les effets des interventions en sécurité alimentaire à Montréal menée entre 2011 et 2012. La variable dépendante a été l’insécurité alimentaire. Les variables indépendantes ont été le mode de transport utilisé pour transporter les aliments, l’emplacement de l’épicerie la plus fréquentée par le participant, la distance entre l’organisme communautaire fréquenté par le participant et son domicile, la proximité de l’épicerie la plus fréquentée, la satisfaction quant à l’acceptabilité et le caractère abordable des aliments dans l’épicerie la plus fréquentée, et les difficultés d’accès aux aliments. Des régressions logistiques furent effectuées afin d’évaluer la relation entre les variables indépendantes et le degré de l’insécurité alimentaire, en utilisant l’insécurité sévère comme catégorie de référence. Résultats : Nos données suggèrent que la sévérité de l’insécurité alimentaire est associée à la difficulté d’accès aux aliments à cause de la cherté des aliments (pour la sécurité alimentaire, OR=0.13; CI : 0.07-0.25 et pour l’insécurité alimentaire modérée, OR=0.42; CI : 0.28-0.63), au fait de faire l’épicerie à l’extérieur du quartier ou de faire rarement l’épicerie (pour l’insécurité alimentaire modérée, OR=0.50, CI : 0.30-0.84), au fait d’avoir accès au transport collectif (pour l’insécurité alimentaire modérée, OR=1.73; CI : 1.09-2.73), au fait de résider à une distance moyenne (soit entre 1000 et 2000 mètres) d’un organisme communautaire en sécurité alimentaire (pour l’insécurité alimentaire modérée, OR=1.83; CI : 1.14-2.92), et à la difficulté d’accès aux aliments à cause de contraintes de transport (pour la sécurité alimentaire, OR=0.18, CI : 0.06-0.52). Conclusion : L’accès aux ressources alimentaires est associé au degré de l’insécurité alimentaire des nouveaux ménages participant aux interventions en sécurité alimentaire à Montréal.

Benthic foraminifera groups of ODP Site 162-982

The pulsed decline and eventual extinction of 51 species of elongate, cylindrical deep-sea benthic foraminifera (Stilostomellidae, Pleurostomellidae, and some Nodosariidae) occurred at intermediate water depths (1145-2168 m, Sites 980 and 982) in the northern North Atlantic during the mid-Pleistocene transition (MPT, 1.2-0.6 Ma). In the early Pleistocene, prior to their disappearance, these species comprised up to 20% of the total abundance of the benthic foraminiferal assemblage at 2168 m, but up to only 2% at 1145 m. The MPT extinction of 51 species represents ?20% of the total benthic foraminiferal diversity at bathyal depths in the North Atlantic (excluding the myriad of small unilocular forms). The extinction rate during the MPT was approximately 10 species per 0.1 myr, being one or two orders of magnitude greater than normal background turnover rates of deep-sea benthic foraminifera. Comparison of the precise timings of declines and disappearances (= highest occurrences) of each species shows that they were often diachronous between the two depths. The last of these species to disappear in the North Atlantic was Pleurostomella alternans at ~0.679 and ~0.694 Ma in Sites 980 and 982, respectively, which is in good agreement with the previously documented global "Stilostomella extinction" datum within the period 0.7-0.58 Ma. Comparison with similar studies in intermediate depth waters in the Southwest Pacific Gateway indicates that ~61% of the extinct species were common to both regions, and that although the pattern of pulsed decline was similar, the precise order and timing of the extinction of individual species were mostly different on opposite sides of the world. Previous studies have indicated that this extinct group of elongate, cylindrical foraminifera lived infaunally and had their greatest abundances in poorly ventilated, lower oxygen environments. This is supported by our study where there is a strong positive correlation (r = ~+ 0.8) between the flux of the extinction group and low-oxygen/high organic input species (such as Uvigerina, Bulimina and Bolivina) during the MPT, suggesting a close relationship with lower oxygen levels and high food supply to the sea floor. The absolute abundance, flux, and number of the extinction group of species show a progressive withdrawal pattern with major decreases occurring in cold periods with high d13C values. This might be related to increasing chemical ventilation of glacial intermediate water.