How does a hilly urban environment influence daily physical activity in obese individuals?

Background: Increases in physical activity (PA) are promoted by walking in an outdoor environment. Along with walking speed, slope is a major determinant of exercise intensity, and energy expenditure. The hypothesis was that in free-living conditions, a hilly environment diminishes PA to a greater extent in obese (OB) when compared with control (CO) individuals. Methods: To assess PA types and patterns, 28 CO (22 ± 2 kg/m2) and 14 OB (33 ± 4 kg/m2) individuals wore during an entire day 2 accelerometers and 1 GPS device, around respectively their waist, ankle and shoulder. They performed their usual PA and were asked to walk an additional 60 min per day. Results: The duration of inactivity and activity with OB individuals tended to be, respectively, higher and lower than that of CO individuals (P = .06). Both groups spent less time walking uphill/downhill than on the level (20%, 19%, vs. 61% of total walking duration, respectively, P < .001). However OB individuals spent less time walking uphill/downhill per day than CO (25 ± 15 and 38 ± 15 min/d, respectively, P < 0.05) and covered a shorter distance per day (3.8 km vs 5.2 km, P < 0.01). Conclusions: BMI and outdoor topography should also be considered when prescribing extra walking in free-living conditions.

3D gait assessment in young and elderly subjects using foot-worn inertial sensors.

This study describes the validation of a new wearable system for assessment of 3D spatial parameters of gait. The new method is based on the detection of temporal parameters, coupled to optimized fusion and de-drifted integration of inertial signals. Composed of two wirelesses inertial modules attached on feet, the system provides stride length, stride velocity, foot clearance, and turning angle parameters at each gait cycle, based on the computation of 3D foot kinematics. Accuracy and precision of the proposed system were compared to an optical motion capture system as reference. Its repeatability across measurements (test-retest reliability) was also evaluated. Measurements were performed in 10 young (mean age 26.1±2.8 years) and 10 elderly volunteers (mean age 71.6±4.6 years) who were asked to perform U-shaped and 8-shaped walking trials, and then a 6-min walking test (6MWT). A total of 974 gait cycles were used to compare gait parameters with the reference system. Mean accuracy±precision was 1.5±6.8cm for stride length, 1.4±5.6cm/s for stride velocity, 1.9±2.0cm for foot clearance, and 1.6±6.1° for turning angle. Difference in gait performance was observed between young and elderly volunteers during the 6MWT particularly in foot clearance. The proposed method allows to analyze various aspects of gait, including turns, gait initiation and termination, or inter-cycle variability. The system is lightweight, easy to wear and use, and suitable for clinical application requiring objective evaluation of gait outside of the lab environment.

Update of the BIPM comparison BIPM.RI(II)-K1.Cs-134 of activity measurements of the radionuclide 134Cs to include the 2008 results of the BEV (Austria), the 2009 result of the IRA (Switzerland) and the 2010 results of the NMISA (South Africa)

Purine nucleotide pyrophosphotransferase was purified to apparent homogeneity from a culture filtrate of Streptomyces morookaensis. It is a monomeric protein with a molecular weight of 24 000-25 000, and its isoelectric point is 6.9. The enzyme synthesizes purine nucleoside 5'-phosphate (mono, di, or tri) 3'-diphosphates such as pppApp, ppApp, pApp, pppGpp, ppGpp and pppIpp by transferring a pyrophosphoryl group from the 5'-position of ATP, dATP and ppApp to the 3'-position of purine nucleotides. The purified enzyme catalysed the formation of 435 mumol of pppApp and 620 mumol of pppGpp from ATP and GTP per min mg protein under the standard conditions. The enzyme requires absolutely a divalent cation for activity, and optimum pH for the enzyme activity lay above 10 for Mg2+, for Co2+ and Zn2+ from 9 to 9.5, and for Fe2+ from 7.5 to 8. The following Michaelis constants were determined: AMP, 2.78 mM; ADP, 3.23 mM; GMP, 0.89 mM; GDP, 0.46 mM and GTP, 1.54 mM, in the case of ATP donor. The enzyme is inhibited by guanine, guanosine, dGDP, dGTP, N-bromosuccinimide, iodacetate, sodium borate and mercuric acetate.

The Rapakivi texture of feldspars in a plutonic mixing environment - A dissolution-recrystallization process

A new hypothesis is formulated to explain the development of rapakivi texture in and around the mafic enclaves of porphyritic granitoids, i.e. in environments involving magma mixing and mingling. The formation of a plagioclase mantle around alkali feldspar megacrysts is attributed to the localized presence of a melt resulting from the reaction of these megacrysts, with host hybrid magma with which they are in disequilibrium. This feldspathic melt adheres to the resorbed crystals and is virtually immiscible with the surrounding magma. Its composition is modified in terms of the relative proportions of K2O, Na2O, and CaO through selective diffusion of these elements, thus allowing the specific crystallization of andesine. With decreasing temperature, the K-feldspar, again stable, crystallizes along with the plagioclase, leading to mixed mantle structures.

Intraobserver and interobserver variability of ascending aorta diameter as assessed with ECG-gated MDCT: automatic versus manual measurements

Purpose: Recently morphometric measurements of the ascending aorta have been done with ECG-gated MDCT to help the development of future endovascular therapies (TCT) [1]. However, the variability of these measurements remains unknown. It will be interesting to know the impact of CAD (computer aided diagnosis) with automated segmentation of the vessel and automatic measurements of diameter on the management of ascending aorta aneurysms. Methods and Materials: Thirty patients referred for ECG-gated CT thoracic angiography (64-row CT scanner) were evaluated. Measurements of the maximum and minimum ascending aorta diameters were obtained automatically with a commercially available CAD and semi-manually by two observers separately. The CAD algorithms segment the iv-enhanced lumen of the ascending aorta into perpendicular planes along the centreline. The CAD then determines the largest and the smallest diameters. Both observers repeated the automatic measurements and the semimanual measurements during a different session at least one month after the first measurements. The Bland and Altman method was used to study the inter/intraobserver variability. A Wilcoxon signed-rank test was also used to analyse differences between observers. Results: Interobserver variability for semi-manual measurements between the first and second observers was between 1.2 to 1.0 mm for maximal and minimal diameter, respectively. Intraobserver variability of each observer ranged from 0.8 to 1.2 mm, the lowest variability being produced by the more experienced observer. CAD variability could be as low as 0.3 mm, showing that it can perform better than human observers. However, when used in nonoptimal conditions (streak artefacts from contrast in the superior vena cava or weak lumen enhancement), CAD has a variability that can be as high as 0.9 mm, reaching variability of semi-manual measurements. Furthermore, there were significant differences between both observers for maximal and minimal diameter measurements (p<0.001). There was also a significant difference between the first observer and CAD for maximal diameter measurements with the former underestimating the diameter compared to the latter (p<0.001). As for minimal diameters, they were higher when measured by the second observer than when measured by CAD (p<0.001). Neither the difference of mean minimal diameter between the first observer and CAD nor the difference of mean maximal diameter between the second observer and CAD was significant (p=0.20 and 0.06, respectively). Conclusion: CAD algorithms can lessen the variability of diameter measurements in the follow-up of ascending aorta aneurysms. Nevertheless, in non-optimal conditions, it may be necessary to correct manually the measurements. Improvements of the algorithms will help to avoid such a situation.

Health and the Built Environment, Sources of Information

The Institute of Public Health in Ireland (IPH) has produced a series of reviews which look at the health impacts of identified subject areas. Four reviews have been produced in the areas of employment, transport, the built environment and education. All reviews may be found at http://www.publichealth.ie/ireland/hiaresources. This resource supplements the ‘Health Impacts of Built Environment’ report. It highlights a number of organisations whose work considers issues relevant to the relationship between health and built environment.

Health Impacts of the Built Environment: A review

This review is the third in the series and illustrates how the built environment impacts on health. It also highlights the unequal distribution of these impacts on different sections of the population. We hope it will help inform debate about the links between the built environment and health and be a useful resource for those working to influence public policy for health at local and national level across the island. The review has an extensive reference list. To supplement the health impacts of the built environment review a 'sources of information' list has been developed which highlights a number of organisations whose work considers issues relevant to the relationship between health and the built environment.

Comparability of clinical wear measurements by optical 3D laser scanning in two different centers.

OBJECTIVE: The purpose of this study was to compare the use of different variables to measure the clinical wear of two denture tooth materials in two analysis centers. METHODS: Twelve edentulous patients were provided with full dentures. Two different denture tooth materials (experimental material and control) were placed randomly in accordance with the split-mouth design. For wear measurements, impressions were made after an adjustment phase of 1-2 weeks and after 6, 12, 18, and 24 months. The occlusal wear of the posterior denture teeth of 11 subjects was assessed in two study centers by use of plaster replicas and 3D laser-scanning methods. In both centers sequential scans of the occlusal surfaces were digitized and superimposed. Wear was described by use of four different variables. Statistical analysis was performed after log-transformation of the wear data by use of the Pearson and Lin correlation and by use of a mixed linear model. RESULTS: Mean occlusal vertical wear of the denture teeth after 24 months was between 120μm and 212μm, depending on wear variable and material. For three of the four variables, wear of the experimental material was statistically significantly less than that of the control. Comparison of the two study centers, however, revealed correlation of the wear variables was only moderate whereas strong correlation was observed among the different wear variables evaluated by each center. SIGNIFICANCE: Moderate correlation was observed for clinical wear measurements by optical 3D laser scanning in two different study centers. For the two denture tooth materials, wear measurements limited to the attrition zones led to the same qualitative assessment.

Ireland on the move: Enhancing opportunities for physical activity in the built environment

The Institute of Public Health in Ireland recently hosted a seminar on physical activity. The seminar presentations were: Ms Teresa Lavin, IPH - Physical activity and the built environment in Ireland Prof James Sallis, Professor of Psychology at San Diego State University and Director of Active Living Research - Translating evidence from physical activity research into practice.

IPH Submission to Department of the Environment, Heritage and Local Government Climate Change Response Bill 2010

The main purpose of the Clmate Change Bill is to provide for the adoption of a national policy for reducing greenhouse gas (GHG) emissions; to support this through the making of mitigation and adaptation action plans; and to make provision for emission reduction targets to support the objective of transition to a low carbon, climate resilient and environmentally sustainable economy.The remit of the Institute of Public Health in Ireland (IPH) is to promote cooperation for public health between Northern Ireland and the Republic of Ireland in the areas of research and information, capacity building and policy advice. Our approach is to support Departments of Health and their agencies in both jurisdictions, and maximise the benefits of all-island cooperation to achieve practical benefits for people in Northern Ireland and the Republic of Ireland.IPH has a keen interest in the effects of climate change on health. In September 2010 the IPH published a paper – Climate Change and Health: A platform for action - to inform policy-makers and the public about the health benefits in reducing greenhouse gas emissions. This paper followed a seminar with international speakers, opened by Minister Gormley, on the same topic in February 2010. 

IPH response to Department of the Environment, Heritage and Local Government and the Department for Regional Development Spatial Strategies

The remit of the Institute of Public Health in Ireland (IPH) is to promote cooperation for public health between Northern Ireland and the Republic of Ireland in the areas of research and information, capacity building and policy advice. Our approach is to support Departments of Health and their agencies in both jurisdictions, and maximise the benefits of all-island cooperation to achieve practical benefits for people in Northern Ireland and the Republic of Ireland. As an all-island body, the Institute of Public Health in Ireland particularly welcomes that the Framework for Collaboration has been co-produced by the Department for Regional Development and the Department of the Environment, Heritage and Local Government. In addition the Institute of Public Health welcomes a more holistic approach to spatial planning that takes into account the environment and sustainable economic development. A clean environment and a more equitable distribution of prosperity have associated health benefits, as outlined in the IPH’s Active travel – healthy lives (2011) and Health impacts of the built environment- a review (2006).