Skull morphometrics of adult male Antartic fur seal, Arctocephalus gazella, and South American fur seal A. australis

The skull morphometrics of adult male Antarctic fur seal, Arctocephalus gazella (Peters, 1875) and South American fur seal, A. australis (Zimmermann, 1783) were investigated using a collection of 45 and 38 skulls, respectively. Eighteen measurements were taken for each specimen. Comparative univariate and multivariate statistical analyses included standard statistics, one-way analysis of variance, principal component analysis and discriminant analysis. Individual variation was relatively high for some variables, as expressed by the coefficient of variation. Skulls of A. gazella were larger than those of A. australis for all but two variables: squamosal jugal suture and rostral length. Both species differed significantly as shown by both univariate and multivariate analyses. The discriminant function correctly classified all specimens. The standardized canonical coefficients showed that the variables which most contribute to the differentiation between species were, in decreasing order, the rostral length, palatal length, palatal width at postcanine 5 and braincase width. The present study corroborates that A. gazella and A. australis are phenotipically distinct species.

Assemblage of immature Odonata (Insecta, Anisoptera) in streams of the Mato Grosso do Sul State: spatial implications

ABSTRACT This study investigated the assemblages attributes (composition, abundance, richness, diversity and evenness) and the most representative genera of Odonata, Anisoptera at Água Boa and Perobão Streams, Iguatemi River basin, Brazil. Both are first order streams with similar length that are impacted by riparian forest removal and silting. Quarterly samplings were conducted from March to December 2008 in the upper, intermediate and lower stretch of each stream. The Mantel test was used to check the influence of spatial autocorrelation on the Odonata composition. Spatial variations in the composition were summarized by the Principal Coordinates Analysis (PCoA) using Mantel test residuals. The effects of spatial correlation on richness and abundance were investigated by the spatial correlogram of Moranʼs I coefficients. The most representative genera in each stream were identified by the Indicator Value Method. The spatial variations in the attributes of the assemblages were assessed using analysis of variance of null models. We collected 500 immature individuals of 23 genera and three families. Among the attributes analyzed only the composition and abundance showed significant spatial differences, with the highest mean abundance found in the Perobão Stream. Miathyria and Zenithoptera were the indicator genera of the Água Boa Stream and Erythrodiplax, Libellula, Macrothemis, Progomphus and Tramea were the indicator genera of the Perobão Stream.

Influência de elementos climáticos na mortalidade de cidades brasileiras

In this paper, preliminary to a series of investigations that the A. has the purpose to make about the influence of climatic factors particularly upon the prevalence of the most important acute infectious diseases in Brazil, he raises the question whether such factors do affect in this country the total death rates, as it is reasonable to suppose, according to what has been observed in temperate zones of northern and southern hemispheres. The inclusion of absolute humidity among other climatic factors to be dealt with seems justifiable according to Rogers and Stallybrass. Owing to scarcety of reliable data the A. was obliged to limit to a five-years period (1940-1944) the complete proposed investigation, which includes seven of the most important cities, scattered throughout the brazilian territory, from north to south - Belém, recife, Salvador, Rio, S. Paulo, Curitiba and Porto Alegre. Reference is made to their normal climatic conditions and monthly death-rates variations with their mean values and standard deviations. In a first part dealing with seasonal variations only for purposes of comparison, he points out that in there tropical cities of Brazil, without very clear seasonal differentiation, the curve of general mortality reached its highest point in austral autumn season and the remaining four (including Rio near the tropic) in the spring, with the exception of Curitiba, where the peak coincided with the summer season. He shows how such important causes of deaths, as diarrheas, common respiratory diseases and tuberculosis, whose seasonal distribution for each one of the seven cities is referred, may explain such seasonal variations. On a second part, a study is made of the general mortality distribution by four-months periods selected in accordance respectively with the highest or lowest values of rainfall and of mean temperature and humidity during period 1940-1944. Finally he compares the monthly waves of such climatic factors and the corresponding waves of total death - rates and finds through correlation coefficients 17 significant values with respect to their standard errors. Variations in the death - rates seemed to be perhaps more closely and uniformly associated with variations of mean humidity, as is indicated by coefficients ranging from + 0.3 to 0.6.

Doenças intestinais em cidades brasileiras: associação com elementos climáticos

Enteric fevers and dysenteries showed, during the period 1940-44, a summer prevalence in brazilian cities of the temperate zone. The distribu¬tion of the diseases by four-months periods, selected in acordance with the highest of lowest values of rainfall, mean temperature and absolute humidity induced to suppose that, in those cities, and also in tropical ones, both enteric fevers and dysenteries were closely associated with such climatic factors: enteric fevers mainly with absolute humidity and temperature, and dysenteries with humidity and rainfall. Correlation coefficients, statistically significant, have been obtained comparing monthly waves of climatic factors and corresponding waves of prevalence of the diseases. For enteric fevers, clear associations have been disclosed: with temperature variations in all temperate cities (coefficients ranging from + 0.42 to + 0.75, higher with mean temperature in the previous month) and in two of the four tropical cities (from + 0.26 to ± 0.30); with absolute humidity variations in cities of the first group (from + 0.51 to 0.71) and in the tropical city of Rio ( + 0.26 ± 0.12 and + 0.28 ± 0.12); and also with rainfall variations but only in two temperate cities (from + 0.28 to + 0.64). For dysenteric diseases, in cities of temperate zone similar associations have been found with absolute humidity (values of r, ranging from + 0.32 to + 0.45), with temperature (from + 0.26 to + 0.44); and with rainfall only in Curitiba ( + 0.25 ± 0.12). Recife (tropical city) yielded two significant values : r = — 0.27 ± 0.12 (correlation with mean temperature in the same month) and r = + 0.40 ± 0.11 and -h 0.37 ± 0.11 (between monthly morbidity rates and rainfall, respectively in the same month and in the previous one). Deaths by diarrhea and enteritis, in the cities of the temperate zone, prevailed in spring-summer seasons, also in four-months periods of highest temperature and humidity, for those cities and for the tropical ones, with the exception of Belem in which percentages were identical to those of opposite periods. Still with the exception of Belem, in all cities studied positive correla¬tion coefficients, statistically significant, have been obtained with temperature variations (ranging from + 0.25 to + 0.65 in tropical cities, and from + 0.47 to + 0.76 in temperate zone) and with humidity variations (from + 0.34 to + 0.44 in the first group, and from + 0.43 and + 0.74 in the second) . With rainfall, only Rio (in the tropical region) showed a significant value for r ( + 0.26 ±0:12); similarly in S. Paulo and Curitiba, the values ranged from + 0.46 to + 0.56, while in Porto Alegre there were found — 0.26 ± 0.12 and — 0.32 ± 012, for rainfall variations in the same and previous months.

Temperatura, humidade e pluviosidade nas suas relações com doenças respiratórias, em cidades brasileiras

During the period 1940-44, deaths by respiratory diseases and particularly by influenza and pneumonias prevailed during the winter in brazilian cities of the temperate zone (S. Paulo, Curitiba, Porto Alegre) and, with the exception of Rio de Janeiro, in tropical ones (Belem, Recife, Salvador) particularly during the four-months period of highest absolute humidity. For the first group of cities, negative correlation coefficients, statistically significant, have been uniformly obtained comparing monthly death-rates both with temperature - in the same month and in the previous one (values of r ranging from - 0.36 to - 0.640 - and with similar humidity variations (values of r from - 0.33 to - 0.59); also with rainfall, but only in S. Paulo and Curitiba (values of r from - 0.33 to - 0.61). Such associations have been disclosed irregularly and less frequently for the group of tropical cities: statistically significant values of r, in the death-rates correlations with temperature and humidity variations, have been eventually either positive (Recife, Salvador) or negative (Belem, Rio). Whooping cough showed during the same period a winter incidence in Curitiba and Porto Alegre: the compulsory notification of the disease is not required in S. Paulo, a third one brazilian city of the temperate zone. In the brazilian tropical cities of Belem, Recife, Salvador and Rio, the whooping cough distribution by four-months periods - selected in accordance with the highest or lowest values of rainfall, mean temperature and absolute humidity - induced to suppose that the disease was associated more uniformly with a high rainfall than with a low temperature or a low absolute humidity. However, only a few correlation coefficients statistically significant have been found out: between monthly morbidity rates and mean humidity in the same month and in the previous one in recife (-0.43 and - 0.39), and in Porto Alegre (-0.35 and - 0.46); and between the same rates and temperature variations in this last city (-0.28 and - 0.43).

Ecological and Economic Impacts within the Environmental Input-Output Framework

The environmental input-output approach reveals the channels through which the environmental burdens of production activities are transmitted throughout the economy. This paper uses the input-output framework and analyses the changes in Spanish emission multipliers during the period 1995-2000. By decomposing the global changes in multipliers into different components, it is possible to evaluate separately the economic and ecological impacts captured by the environmental input-output model. Specifically, in this study we distinguish between the effects on multipliers caused by changes in emission coefficients (the ecological impacts) and the effects on multipliers caused by changes in technical coefficients (the economic impacts). Our results show a significant improvement in the ecological impacts of production activities, which contributed negatively to changes in emission multipliers. They also show a deterioration in the economic impacts, which contributed positively to changes in emission multipliers. Together, these two effects lead to a small reduction in global multipliers during the period of analysis. Our results also show significant differences in the individual behaviour of different sectors in terms of their contribution to multiplier changes. Since there are considerable differences in the way individual sectors affect the changes in emission levels, and in the intensity of these effects, this means that the final effects will basically depend on the activity considered. Keywords: emission multipliers, multipliers' changes, ecological impacts, economic impacts.

Human capital in growth regressions: how much difference does data quality make? An update and further results

We construct estimates of educational attainment for a sample of OECD countries using previously unexploited sources. We follow a heuristic approach to obtain plausible time profiles for attainment levels by removing sharp breaks in the data that seem to reflect changes in classification criteria. We then construct indicators of the information content of our series and a number of previously available data sets and examine their performance in several growth specifications. We find a clear positive correlation between data quality and the size and significance of human capital coefficients in growth regressions. Using an extension of the classical errors in variables model, we construct a set of meta-estimates of the coefficient of years of schooling in an aggregate Cobb-Douglas production function. Our results suggest that, after correcting for measurement error bias, the value of this parameter is well above 0.50.

On Boas-Type Problem

R.P. Boas has found necessary and sufficient conditions of belonging of function to Lipschitz class. From his findings it turned out, that the conditions on sine and cosine coefficients for belonging of function to Lip α(0 & α & 1) are the same, but for Lip 1 are different. Later his results were generalized by many authors in the viewpoint of generalization of condition on the majorant of modulus of continuity. The aim of this paper is to obtain Boas-type theorems for generalized Lipschitz classes. To define generalized Lipschitz classes we use the concept of modulus of smoothness of fractional order.

Normal forms for rational difference equations with applications to the global periodicity problem

We propose a classification and derive the associated normal forms for rational difference equations with complex coefficients. As an application, we study the global periodicity problem for second order rational difference equations with complex coefficients. We find new necessary conditions as well as some new examples of globally periodic equations.

Determinació de la ubicació estructural dels ions Yb3+ i Nb3+ en Yb:RTP, Nb:RTP i (Nb,Yb):RTP

Estudi elaborat a partir d’una estada al Stony Brook University al juliol del 2006. El RbTiOPO4 (RTP) monocristal•lí és un material d' òptica no lineal molt rellevant i utilitzat en la tecnologia làser actual, químicament molt estable i amb unes propietats físiques molt destacades, entre elles destaquen els alts coeficients electro-òptics i l'alt llindar de dany òptic que presenta. En els últims anys s’està utilitzant tecnològicament en aplicacions d'òptica no lineal en general i electro-òptiques en particular. En alguns casos ja ha substituït, millorant prestacions, a materials tals com el KTP o el LNB(1). Dopant RTP amb ions lantànids (Ln3+) (2-4), el material es converteix en un material làser auto-doblador de freqüència, combinant les seves propietats no lineals amb les de matriu làser. El RTP genera radiació de segon harmònic (SHG) a partir d’un feix fonamental amb longituds d’ona inferiors a 990 nm, que és el límit que presenta el KTP.La determinació de la ubicació estructural i l’estudi de l'entorn local del ions actius làser és de fonamental importància per a la correcta interpretació de les propietats espectroscòpiques d’aquest material. Mesures de difracció de neutrons sobre mostra de pols cristal•lí mostren que els ions Nb5+ i Ln3+ només substitueixin posicions de Ti4+ (8-9). Estudis molt recents d'EPR (electron paramagnetic resonance) semblen indicar que quan la concentració d'ió Ln3+ es baixa, aquest ió presenta la tendència a substituir l'ió alcalí present a l'estructura (10).Després dels resultats obtinguts en el present treball a partir de la tècnica EXAFS a la instal•lació sincrotò del Brookhaven National Laboratory/State University of New York (Stony Brook) es pot concloure definitivament que els ions Nb s’ubiquen en la posició Ti (1) i que els ions Yb3+ es distribueixen paritariament en les dues posicions del Ti (1 i 2). Aquests resultats aporten una valuosa informació per a la correcta interpretació dels espectres, tant d’absorció com d’emissió, del material i per la avaluació dels paràmetres del seu comportament durant l'acció làser.

Norm inequalities in multidimensional Lorentz spaces

In this paper we obtain necessary and sufficient conditions for double trigonometric series to belong to generalized Lorentz spaces, not symmetric in general. Estimates for the norms are given in terms of coefficients.

Development of CBCT-based prostate setup correction strategies and impact of rectal distension.

BACKGROUND: Cone-beam computed tomography (CBCT) image-guided radiotherapy (IGRT) systems are widely used tools to verify and correct the target position before each fraction, allowing to maximize treatment accuracy and precision. In this study, we evaluate automatic three-dimensional intensity-based rigid registration (RR) methods for prostate setup correction using CBCT scans and study the impact of rectal distension on registration quality. METHODS: We retrospectively analyzed 115 CBCT scans of 10 prostate patients. CT-to-CBCT registration was performed using (a) global RR, (b) bony RR, or (c) bony RR refined by a local prostate RR using the CT clinical target volume (CTV) expanded with 1-to-20-mm varying margins. After propagation of the manual CT contours, automatic CBCT contours were generated. For evaluation, a radiation oncologist manually delineated the CTV on the CBCT scans. The propagated and manual CBCT contours were compared using the Dice similarity and a measure based on the bidirectional local distance (BLD). We also conducted a blind visual assessment of the quality of the propagated segmentations. Moreover, we automatically quantified rectal distension between the CT and CBCT scans without using the manual CBCT contours and we investigated its correlation with the registration failures. To improve the registration quality, the air in the rectum was replaced with soft tissue using a filter. The results with and without filtering were compared. RESULTS: The statistical analysis of the Dice coefficients and the BLD values resulted in highly significant differences (p<10(-6)) for the 5-mm and 8-mm local RRs vs the global, bony and 1-mm local RRs. The 8-mm local RR provided the best compromise between accuracy and robustness (Dice median of 0.814 and 97% of success with filtering the air in the rectum). We observed that all failures were due to high rectal distension. Moreover, the visual assessment confirmed the superiority of the 8-mm local RR over the bony RR. CONCLUSION: The most successful CT-to-CBCT RR method proved to be the 8-mm local RR. We have shown the correlation between its registration failures and rectal distension. Furthermore, we have provided a simple (easily applicable in routine) and automatic method to quantify rectal distension and to predict registration failure using only the manual CT contours.

Reproducibility of free-breathing cardiovascular magnetic resonance coronary angiography.

OBJECTIVE: Contemporary free-breathing non contrast enhanced cardiovascular magnetic resonance angiography (CMRA) was qualitatively and quantitatively evaluated to ascertain the reproducibility of the method for coronary artery luminal dimension measurements. SUBJECTS AND METHODS: Twenty-two healthy volunteers (mean age 32 +/- 7 years, 12 males) without coronary artery disease were imaged at 2 centers (1 each in Europe and North America) using navigator-gated and corrected SSFP CMRA on a commercial whole body 1.5T System. Repeat images of right (RCA, n = 21), left anterior descending (LAD, n = 14) and left circumflex (LCX, n = 14) coronary arteries were obtained in separate sessions using identical scan protocol and imaging parameters. True visible vessel length, signal-to-noise (SNR), contrast-to-noise ratios (CNR) and the average luminal diameter over the first 4 cm of the vessel were measured. Intra-observer, inter-observer and inter-scan reproducibility of coronary artery luminal diameter were determined using Pearson's correlation, Bland-Altman analysis and intraclass correlation coefficients (ICC). RESULTS: CNR, SNR and the mean length of the RCA, LAD and LCX imaged for original and repeat scans were not significantly different (all p > 0.30). There was a high degree of intra-observer, inter-observer and inter-scan agreements for RCA, LAD and LCX luminal diameter respectively on Bland-Altman and ICC analysis (ICC's for RCA: 0.98. 0.98 and 0.86; LAD: 0.89, 0.89 and 0.63; LCX: 0.95, 0.94 and 0.79). CONCLUSION: In a 2-center study, we demonstrate that free-breathing 3D SSFP CMRA can visualize long continuous segments of coronary vessels with highly reproducible measurements of luminal diameter.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.

Using information from telephone panel surveys to predict reasons for refusal

One of the key problems in conducting surveys is convincing people to participate.¦However, it is often difficult or impossible to determine why people refuse. Panel surveys¦provide information from previous waves that can offer valuable clues as to why people¦refuse to participate. If we are able to anticipate the reasons for refusal, then we¦may be able to take appropriate measures to encourage potential respondents to participate¦in the survey. For example, special training could be provided for interviewers¦on how to convince potential participants to participate.¦This study examines different influences, as determined from the previous wave,¦on refusal reasons that were given by the respondents in the subsequent wave of the¦telephone Swiss Household Panel. These influences include socio-demography, social¦inclusion, answer quality, and interviewer assessment of question understanding and¦of future participation. Generally, coefficients are similar across reasons, and¦between-respondents effects rather than within-respondents effects are significant.¦While 'No interest' reasons are easier to predict, the other reasons are more situational. Survey-specific issues are able to distinguish¦different reasons to some extent.