Improved polymeric medical devices for active substances delivery

The work presented in this thesis was developed in collaboration with a Portuguese company, BeyonDevices, devoted to pharmaceutical packaging, medical technology and device industry. Specifically, the composition impact and surface modification of two polymeric medical devices from the company were studied: inhalers and vaginal applicators. The polyethylene-based vaginal applicator was modified using supercritical fluid technology to acquire self-cleaning properties and prevent the transport of bacteria and yeasts to vaginal flora. For that, in-situ polymerization of 2-substituted oxazolines was performed within the polyethylene matrix using supercritical carbon dioxide. The cationic ring-opening polymerization process was followed by end-capping with N,N-dimethyldodecylamine. Furthermore, for the same propose, the polyethylene matrix was impregnated with lavender oil in supercritical medium. The obtained materials were characterized physical and morphologically and the antimicrobial activity against bacteria and yeasts was accessed. Materials modified using 2-substituted oxazolines showed an effective killing ability for all the tested microorganisms, while the materials modified with lavender oil did not show antimicrobial activity. Only materials modified with oligo(2-ethyl-2-oxazoline) maintain the activity during the long term stability. Furthermore, the cytotoxicity of the materials was tested, confirming their biocompatibilty. Regarding the inhaler, its surface was modified in order to improve powder flowability and consequently, to reduce powder retention in the inhaler´s nozzle. New dry powder inhalers (DPIs), with different needle’s diameters, were evaluated in terms of internal resistance and uniformity of the emitted dose. It was observed that they present a mean resistance of 0.06 cmH2O0.5/(L/min) and the maximum emitted dose obtained was 68.9% for the inhaler with higher needle´s diameter (2 mm). Thus, this inhaler was used as a test and modified by the coating with a commonly-used force control agent, magnesium stearate, dried with supercritical carbon dioxide (scCO2) and the uniformity of delivered dose tests were repeated. The modified inhaler showed an increase in emitted dose from 68.9% to 71.3% for lactose and from 30.0% to 33.7% for Foradil.

Ionic liquids as catalysts of lignocellulosic biomass processing

The present work is devoted to study the pre-treatment of lignocellulosic biomass, especially wheat straw, by the application of the acidic ionic liquid (IL) such as 1-butyl-3-methylimidazolium hydrogen sulphate. The ability of this IL to hydrolysis and conversion of biomass was scrutinised. The pre-treatment with hydrogen sulphate-based IL allowed to obtain a liquor rich in hemicellulosic sugars, furans and organic acids, and a solid fraction mainly constituted by cellulose and lignin. Quantitative and qualitative analyses of the produced liquors were made by capillary electrophoresis and high-performance liquid chromatography. Pre-treatment conditions were set to produce xylose or furfural. Specific range of temperatures from 70 to 175 °C and residence times from 20.0 to 163.3 min were studied by fixing parameters such as biomass/IL ratio (10 % (w/w)) and water content (1.25 % (w/w)) in the pre-treatment process. Statistical modelling was applied to maximise the xylose and furfural concentrations. For the purpose of reaction condition comparison the severity factor for studied ionic liquid was proposed and applied in this work. Optimum conditions for xylose production were identified to be at 125 °C and 82.1 min, at which 16.7 % (w/w) xylose yield was attained. Furfural was preferably formed at higher pre-treatment temperatures and longer reaction time (161 °C and 104.5 min) reaching 30.7 % (w/w) maximum yield. The influence of water content on the optimum xylose formation was also studied. Pre-treatments with 5 and 10 % (w/w) water content were performed and an increase of 100 % and 140 % of xylose yield was observed, respectively, while the conversion into furfural maintained unchanged.

Incorporação de resíduos de cerâmica em argamassas de cal aérea

Sabe-se que aproximadamente 30% do material produzido pela indústria cerâmica é considerado desperdício e, frequentemente, depositado em aterro, com o impacto ambiental negativo que acarreta. Esta tem sido uma das grandes motivações para a crescente investigação que tem sido levada a cabo a fim de obter soluções viáveis para a sua reintrodução no processo produtivo. A viabilidade do uso de resíduos de material cerâmico tem vindo a ser avaliada, principalmente, na incorporação em betões ou em argamassas com base em cimento. Na antiguidade e na ausência de pozolanas naturais, eram frequentemente utilizados resíduos cerâmicos moídos, atuando como pozolanas artificiais e conferindo algumas características hidráulicas e de durabilidade às argamassas de cal aérea. Temse efetivamente constatado que alguns pós resultantes de desperdícios de cerâmica de barro vermelho, nomeadamente os que foram sujeitos a tratamento térmico a temperaturas inferiores a 900°C e moídos em granulometria fina, podem funcionar como pozolanas artificiais em argamassas. A introdução de resíduos de cerâmica em granulometria mais grossa nas argamassas, como agregado, pode também revelarse vantajoso, na medida em que permite substituir parcialmente a areia normalmente utilizada. Assim sendo, o recurso aos resíduos de cerâmica pode ser muito vantajoso em três vertentes principais: a redução de resíduos a depositar em aterro, a redução da extração de rochas para serem utilizadas na produção de ligantes e de areias e a produção de argamassas com comportamentos melhorados. Com o objetivo de analisar a viabilidade da introdução de resíduos de cerâmica em argamassas, que se pretendem sejam, essencialmente, adequadas como argamassas de substituição, tem vindo a ser desenvolvida investigação na Universidade de Coimbra em colaboração com a Universidade Nova de Lisboa. O trabalho que se apresenta neste artigo é uma pequena parte dessa investigação. Toda esta investigação tem tido o apoio de um projeto de investigação financiado pela FCT.

Risk factors for Leishmania chagasi infection in an endemic area in Raposa, State of Maranhão, Brazil

INTRODUCTION: Infection with Leishmania chagasi is the most common clinical presentation for visceral leishmaniaisis in endemic areas. The municipality of Raposa is an endemic area in State of Maranhão, Brazil, and have had registration cases of visceral leishmaniasis disease. For this reason, a cross- sectional study was conducted to evaluate the risk factors for infection with L. chagasi detected by Montenegro skin test. METHODS: The sample comprised 96% of the inhabitants of the villages of Maresia, Pantoja, and Marisol located in the municipality of Raposa, corresponding to 1,359 subjects. Data were collected using a questionnaire. Univariate and multivariate logistic regression models were applied to evaluate the association between the variables studied and infection of L. chagasi. RESULTS: The variables associated with infection upon nonadjusted analysis were a straw roof, mud walls, floors of beaten earth, presence of sand flies inside or outside of the dwelling, and bathing outdoors. Adjusted analysis showed that the presence of sand flies inside/outside the dwelling was a risk factor, and age younger than 10 years was a protective factor against asymptomatic infection. CONCLUSIONS: The results highlight the extent to which precarious living conditions of the population strengthen the epidemiological chain of visceral leishmaniasis.

Eco-efficient earthen plasters: The influence of the addition of natural fibers.

Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres – oat straw and typha fiber-wool – on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.

Intervenção educativa junto de um grupo de enfermeiros de um serviço de medicina : impacto na prática da terapêutica inalatória

RESUMO: O presente estudo, enquadra-se, no domínio do exercício profissional dos enfermeiros e na formação em serviço destes profissionais e teve por objectivo avaliar, num grupo de enfermeiros de um serviço de medicina, o impacto de uma intervenção educativa na melhoria dos procedimentos a executar na prática da terapêutica inalatória. A amostra do estudo (amostra por conveniência) foi constituída por oito enfermeiros do serviço de medicina do Hospital Curry Cabral (idades compreendidas entre os 24 a 43 anos de idade), sem anterior formação específica na área da terapêutica inalatória, mas com experiencia profissional prévia com doentes respiratórios. O estudo decorreu em dois momentos de avaliação: avaliação 0 (antes da intervenção educativa) e avaliação 1 (após a intervenção educativa). Entre estes dois momentos, foi ministrada, a todos os enfermeiros, uma acção de formação sobre terapêutica inalatória, com componente teórico-prática. Antes e depois da intervenção educativa foram aplicados dois instrumentos: para avaliação dos conhecimentos teóricos, construi-se e aplicou-se, um questionário de auto-avaliação de conhecimentos sobre terapêutica inalatória ao grupo dos enfermeiros, e para avaliação dos conhecimentos práticos e execução de procedimentos, uma grelha de observação da demonstração da técnica de inalação com três dispositivos inalatórios: MDI, MDI com câmara expansora ACE e DPI turbohaler®. Os resultados do estudo mostraram que o grupo dos enfermeiros da nossa amostra detinha já alguns conhecimentos de carácter teórico, de âmbito geral, sobre a terapêutica inalatória, mas conhecimentos pouco sólidos, nomeadamente no que concerne aos fármacos utilizados por via inalatória. Verificou-se, ainda, um deficiente domínio de conteúdos de carácter mais específico e prático sobre terapêutica inalatória, por exemplo a importância de determinados procedimentos - agitação do inalador, tempo de pausa entre cada inalação, cuidados de manutenção da câmara expansora, higienização da cavidade bucal após a inalação dos corticosteróides. Quanto à observação da técnica de inalação, o grupo dos enfermeiros revelou algumas lacunas, quer relativamente à técnica de inalação com MDI, quer do MDI com câmara expansora, observando-se a execução de passos incorrectos e mesmo omissão de passos por parte dos enfermeiros, antes da intervenção educativa.Não nos foi possível realizar a observação da técnica de inalação com dispositivo de pó seco turbohaler®, dado que nenhum dos enfermeiros da nossa amostra se sentiu capaz de manusear de forma correcta este dispositivo, antes e após a formação. Em termos globais, achamos que a formação dada sobre terapêutica inalatória, mostrou melhorar os conhecimentos teóricos e práticos dos enfermeiros neste âmbito. Esta melhoria ficou claramente demonstrada no aumento do número de respostas correctas dadas pelos enfermeiros no questionário efectuado, após a formação. Do mesmo modo, após a formação, registou-se uma melhoria considerável dos conhecimentos específicos e práticos, no que concerne à importância de determinados procedimentos na prática da terapêutica inalatória - agitação do inalador, tempo de pausa entre cada inalação, cuidados de manutenção da câmara expansora, higienização da cavidade bucal após a inalação dos corticosteróides - observando-se, um maior número de respostas correctas assinaladas no questionário. Em contrapartida, os conhecimentos sobre fármacos administrados por via inalatória, ficaram um pouco aquém das expectativas, pois o número de respostas correctas dadas pelos enfermeiros após a formação não foi significativo. Poderemos mesmo dizer que, a acção de formação com maior grau de especificidade sobre fármacos não se revelou eficaz e gerou até alguma ―confusão‖ neste grupo de enfermeiros, parecendo que os conhecimentos anteriores sobre fármacos por via inalatória não estariam consolidados antes da formação. De igual modo, após a formação, registou-se no grupo dos enfermeiros do estudo uma melhoria na performance da técnica de inalação com o MDI e MDI com a câmara expansora. Os enfermeiros do estudo, não só corrigiram os passos ou itens de avaliação da técnica inalatória, anteriormente executados incorrectamente, mas também, mostraram um melhor conhecimento dos passos ou itens de avaliação da técnica de inalação, com menor número de passos ou itens de avaliação omissos, após a formação. Em contrapartida, a acção de formação, no que diz respeito ao dispositivo de pó seco turbohaler®, não cumpriu o seu objectivo, dado que nenhum dos enfermeiros da amostra foi capaz de demonstrar a técnica de inalação com este dispositivo, antes e após a formação. Poderemos dizer que, não sendo um dispositivo da sua prática clínica, os enfermeiros não sentiram necessidade de adquirir estes conhecimentos. Em síntese, podemos concluir que na sua globalidade, a formação dada (com informação actualizada sobre as orientações mais adequadas neste domínio) e o treino formal dos enfermeiros neste âmbito, foi bastante proveitoso, uma vez que, mostrou melhorar os conhecimentos teóricos e práticos na prática da terapêutica inalatória do grupo de enfermeiros doserviço de medicina. Realça-se, no entanto, a importância de uma formação adequada, sentida como útil pelos enfermeiros, faseada, ligada à prática dos profissionais e alternando com momentos de exercício profissional. Os conhecimentos e os procedimentos dos enfermeiros deverão ainda ser monitorizados e avaliados ao longo do tempo, para a detecção de eventuais desvios que a rotina pode introduzir e para levantamento de novas necessidades de formação.-------------------ABSTRACT: This study fits in the domain of in-service training of professional nurses. It was aimed to assess the impact of an educational intervention and the consequent improvement of the practice of inhalation therapy in a group of nurses from a medical service The study sample (convenience sample) was consituted by eight nurses from the medical service, Hospital Curry Cabral (aged 24-43 years) without previous special training in the field of inhalation therapy, but with prior experience with patients with respiratory diseases. The study ran in two moments of evaluation: evaluation 0 (before the educational intervention) and evaluation 1 (post-intervention). Between these two moments, a training program about therapeutic inhalation was administered to all nurses, with a double component of theory and practice. Before and after the educational intervention two evaluation tools were applied: for the assessment of theoretical knowledge, the nurses had to fill a self-assessment questionnaire and in order to evaluate their knowledge related to procedural skills as well as their performance, they were observed (and their behaviour recorded on a check-list) during a demonstration of three inhalation techniques with devices: metered dose inhaler, metered dose inhaler with a spacer device ACE® and device turbohaler® The study results showed that the group of nurses in our sample had already some knowledge of theoretical nature (general scope of the inhalation therapy) but little solid knowledge, particularly in regard to drugs used in inhalation. In fact, a relatively weaker knowledge was registerd in what concerns specific and practical knowledge about inhalation therapy, for example, the importance of certain procedures - shaking the inhaler, pause between each inhalation, maintenance care of spacer device, mouth cavity hygiene after inhalation of corticosteroids. As for the observation of the inhaler technique, it was found that the group of nurses had a poor inhalation technique, in what concerns inhalation technique with MDI or MDI with spacer device, with a performance with several incorrect steps, or even omission of steps by nurses before the educational intervention. Finally, as the observation technique of the dry powder device turbohaler ®, we were unable to analyze the observation concerning this device, since none of the nurses in our sample, wast able to handlle it correctly, before and after training.In general terms, we found that the training given on inhalation therapy had a positive impact either in the theorical or the pratical knowledge on inhalation therapy (higher number of correct answers after training). Similarly, after training, there was the considerable improvement of specific and practical skills, namely the importance of certain procedures in the practice of inhalation therapy - shaking the inhaler, pause time between each inhalation, maintenance care of spacer device, sanitizing the buccal cavity after inhalation of corticosteroids. In contrast, knowledge about drugs administered by inhalation, were slightly below expectations, showing a lower number of correct answers given by the nurses after training. The training seemed to be a factor of "confusion" for this group of nurses, whose prior knowledge in this domais was not probably very solid to begin with. After training, the group of nurses in the study improved the performance of inhalation technique with MDI and MDI with spacer device. They not only correcty performed the steps or itens for the assessment of inhalation technique, previously performed incorrectly, but also showed a better understanding of the steps or itens for assessing the inhalation technique, with fewer steps missing (after training). In contrast, training with regard to the device turbohaler ® dry powder, was also below expectations, given that none of the nurses in the sample was able to demonstrate inhaler technique with this device before and after training. This was probably due to the fact that, the nurses did not feel the need to acquire this knowledge and the related practice. In summary, we can say that, overall, the training (with updated information on the appropriate policies in this field) showed an improvement in knowledge and performance in the practice of inhalation therapy. It is however crucial to underline the importance of in-service adequate training programmes, perceived as useful by the nurses, developped in different phases, linked to the nurses’ practice and combining with professional practices. The nurses’ knowledge and skills should also be further monitorized and evaluated in order to detect deviations introduced by the rotinization of procedures and to identify new training needs.

Spraying food sources with pyrethroid to control peridomestic triatomines

Introduction We attempted to supplement traditional insecticide spraying by treating peridomiciliar food sources with a powder formulation. Methods Two groups of houses were treated with deltamethrin suspension concentrate (SC), one of which had its primary peridomestic food sources treated with deltamethrin 2P. Results Triatoma brasiliensis was the most commonly captured triatomine. Birds, dogs and rodents were the major food sources identified by the precipitin reaction; 554 domestic animals received powder treatment. A sharp reduction in infestation rates was observed in the two groups up to 360 days after spraying. Conclusion The combination SC + 2P did not improve the control of triatomines.

Lucuma as an exotic high quality fruit imported into Portugal and the UE

This project has two different goals, one of them is to promote the consumption of exotic fruits with high quality. The other goal of the project is to look for the viability of turning this work project into a real business, focusing in two different channels to diversify its revenues: B2B and B2C. In order to achieve this second goal, this project aims to see the best way to commercialize this product (Lucuma powder and Pulp of Lucuma) and how to make it in an efficient way with right companies. Therefore, the project aims to create a company to commercialize the product between the producers in Peru and possibly small businesses interested in acquire the processed fruit and also individuals interested in own consumption in small quantities. This project, if successful, tries to diversify the consumption into other good organic healthy products in the long-term.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Larvicidal efficiency of the mushroom Amanitamuscaria (Agaricales, Amanitaceae) against the mosquito Culexquinquefasciatus (Diptera, Culicidae)

Abstract: INTRODUCTION: We report the larvicidal activity of two formulations from Amanita muscariaagainst Culex quinquefasciatus, as well as the viability of the aqueous extract after storage. METHODS The larvicidal activity of aqueous extract and powder from A. muscaria, and the viability of the aqueous extract after storage, were evaluated. RESULTS The aqueous extract caused larval deaths, which varied from 16.4% to 88.4%. The efficiency of the powder varied from 29.2% to 82.8%. Storage did not interfere with the larvicidal efficiency of the aqueous extract of A. muscaria. CONCLUSIONS These results show the potential of A. muscariato control C. quinquefasciatus.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions

Buildings are responsible for more than 40% of the energy consumption and greenhouse gas emissions. Thus, increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials could constitute the most effective way of reducing heat losses in buildings by minimising heat energy needs. These materials have a thermal conductivity factor, k (W/m.K) lower than 0.065 while other insulation materials such as aerated concrete can go up to 0.11. Current insulation materials are associated with negative impacts in terms of toxicity. Polystyrene, for example contains anti-oxidant additives and ignition retardants. In addition, its production involves the generation of benzene and chlorofluorocarbons. Polyurethane is obtained from isocyanates, which are widely known for their tragic association with the Bhopal disaster. Besides current insulation materials releases toxic fumes when subjected to fire. This paper presents experimental results on one-part geopolymers. It also includes global warming potential assessment and cost analysis. The results show that only the use of aluminium powder allows the production mixtures with a high compressive strength however its high cost means they are commercially useless when facing the competition of commercial cellular concrete. The results also show that one-part geopolymer mixtures based on 26%OPC +58.3%FA +8%CS +7.7%CH and 3.5% hydrogen peroxide constitute a promising cost efficient (67 euro/m3), thermal insulation solution for floor heating systems with low global warming potential of 443 KgCO2eq/m3.

Desenvolvimento e caracterização tribológica de hidrogéis poliméricos de PVA reforçados com fosfato tricálcico para aplicação como cartilagem articular para implantes articulares

Dissertação de mestrado integrado em Engenharia de Materiais

Development of polymer wicks for the fabrication of bio-medical sensors

Polymer based wicking structures were fabricated by sintering powders of polycarbonate (PC), ultra-high molecular weight polyethylene and polyamide 12, aiming at selecting a suitable material for an innovative electroencephalography (EEG) bio-electrode. Preliminary experiments showed that PC based wicks displayed the best mechanical properties, therefore more detailed studies were carried out with PC to evaluate the influence of powder granulometry and processing parameters (pressure, temperature and time) on the mechanical properties, porosity, mean pore radius and permeability of the wicks. It was concluded that the mechanical properties are significantly enhanced by increasing the processing time and pressure, although at the expense of a significant decrease of porosity and mean pore diameter (and thus permeability), particularly for the highest applied pressures (74kPa). However, a good compromise between porosity/permeability and mechanical properties could be obtained by sintering PC powders of particle sizes below 500μm at 165°C for 5min, upon an applied pressure of 56kPa. Moreover, PC proved to be chemically stable in contact with an EEG common used disinfectant. Thus, wicking structures with appropriate properties for the fabrication of reusable bio-electrodes could be fabricated from the sintering of PC powders.