Local structures around Y and Ce cations in 10 mol% Y2O3 doped ceria ceramics by EXAFS spectroscopy

Local structures around host Ce and dopant Y cations in 10 mol% Y2O3 doped ceria solid solutions have been investigated by room and high temperature EXAFS spectroscopy. The results show that the local structures around the Cc cation in doped ceria samples are similar to that in the fluorite CeO2 structure though the coordination numbers of Ce-O tend to be smaller than 8. The local structures around Y cation, however, are significantly different from those around Ce cation, and show more resemblance to that around Y cation in the C-type Y2O3 Structure. A more accurate description of the local structures around Y cation in doped ceria was given by analyzing Y-K edge EXAFS spectra based on the C-type Y2O3 structure. (c) 2006 Elsevier B.V. All rights reserved.

Microstructures and electrolytic properties of yttrium-doped ceria electrolytes: Dopant concentration and grain size dependences

The microstructures and electrolytic properties of YxCe1-xO2-x/2 (x = 0.10-0.25) electrolytes with average grain size in the range 90 nm-1.7 mu m were systematically investigated. Through detailed transmission electron microscopy characterization, nanosized domains were observed. The relationship of the domains, the doping level and grain sizes were determined, and their impacts on the electrolytic properties were systematically studied. It was found that the formation of domains has a negative impact on the electrolytic properties, so that electrolytic properties can be adjusted through careful control of domain formation, doping level and grain size. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

An examination of the role of the concept of the community within the current reorganisation of English local government

The thesis will examine the role and impact of the concept of the community within the structural reorganisation of English local government between 1992 and 1995. The methodological approach adopted within this thesis has been to compare the use, application and significance of the community with a case study of a specific local authority and its preparations for reorganisation. The authority in question was Wychavon District Council located in the County of Hereford and Worcester. The conclusions from this case study were then compared to the role and significance of the community in the reviews of other local authorities in England. This study produced two important results. These were that there was an established body of literature which argued that the community could be of value to local government and that the community should be identified by measuring individuals sense of belonging and feelings of attachment, as well as such daily activities as shopping and working (which help to stimulate these feelings). The then Conservative Government even instructed the specially appointed Commission to apply this particular interpretation of the community to their reviews, and to attempt to base any new unitary authorities upon the social and spatial area it created. The Conservative Government also gave the Commission a Community Index to assist with the identification of communities, and appointed the pollsters MORI to support the Commission with the task of identifying the emotional and more subjective senses of community. The Commission eventually came to rely entirely on the MORI polls, and whilst these polls attempted to faithfully apply the Governments interpretation of the community, they unfortunately produced small and often complex communities, which the Commission felt could not be applied to its reviews. This therefore led to the community becoming a secondary consideration to the factors of cost and efficiency. Furthermore the problematic nature of the community - that is, the production of small and complex communities - was repeated in this thesis' own survey of community identities in the District of Wychavon. In fact this authority's proposals for reorganisation were based almost entirely upon the factors of cost, size and efficiency.

Influence of impact angles on penetration rates of CRAs exposed to a high velocity multiphase flow

A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in a mixed gas - saltwater - sand multiphase flow at impact velocities up to 70 m/s. Artificial brine with a salt content of 27 g/1 was used as liquid phase. Sand content, with grain size below 150 µ, was 2.7 g/l brine. CO at a pressure of 15 bar was used as gas phase. The impact angle between jet stream (nozzle) and sample surface was varied between 30 and 90°. Rectangular stainless steel disc samples with a size of 20 × 15 × 5 mm were used. They were mechanically ground and polished prior to testing. Damaged surfaces of specimens exposed to the high velocity multiphase flow were investigated by stereo microscopy, scanning electron microscopy (SEM) and an optical device for 3D surface measurements. Furthermore, samples were investigated by applying atomic force microscopy (AFM), magnetic force microscopy (MFM) and nanoindentation. Influence of impact velocity and impact angle on penetration rates (mass loss rates) of two CRAs (UNS S30400 and N08028) are presented. Moreover effects of chemical composition and mechanical properties are critically discussed. © 2008 by NACE International.

Characterization of oxide layers grown on D9 austenitic stainless steel in lead bismuth eutectic

Lead bismuth eutectic (LBE) is a possible coolant for fast reactors and targets in spallation neutron sources. Its low melting point, high evaporation point, good thermal conductivity, low reactivity, and good neutron yield make it a safe and high performance coolant in radiation environments. The disadvantage is that it is a corrosive medium for most steels and container materials. This study was performed to evaluate the corrosion behavior of the austenitic stainless steel D9 in oxygen controlled LBE. In order to predict the corrosion behavior of steel in this environment detailed analyses have to be performed on the oxide layers formed on these materials and various other relevant materials upon exposure to LBE. In this study the corrosion/oxidation of D9 stainless steel in LBE was investigated in great detail. The oxide layers formed were characterized using atomic force microscopy, magnetic force microscopy, nanoindentation, and scanning electron microscopy with wavelength-dispersive spectroscopy (WDS) to understand the corrosion and oxidation mechanisms of D9 stainless steel in contact with the LBE. What was previously believed to be a simple double oxide layer was identified here to consist of at least 4 different oxide layers. It was found that the inner most oxide layer takes over the grain structure of what used to be the bulk steel material while the outer oxide layer consists of freshly grown oxides with a columnar structure. These results lead to a descriptive model of how these oxide layers grow on this steel under the harsh environments encountered in these applications.

Social-cognitive antecedents of ambidextrous orientation in family-owned startups: The role of family ties, achievement motivation, and internal locus of control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore "new ideas", exploit "old certainties" and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research —achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

Spatial patterns of manufacturing clusters in Vietnam

The formation of industrial clusters is critical for sustained economic growth. We identify the manufacturing clusters in Vietnam, using the Mori and Smith (2013) method, which indicates the spatial pattern of industrial agglomerations using the global extent (GE) and local density (LD) indices. Spatial pattern identification is extremely helpful because industrial clusters are often spread over a wide geographical area and the GE and LD indices—along with cluster mapping—display how the respective clusters fit into specific spatial patterns.

Spatial structures of manufacturing clusters in Cambodia, Lao People's Democratic Republic, and Thailand

Examining the spatial structure of clusters is essential for deriving regional development policy implications. In this study, we identify the manufacturing clusters in Cambodia, the Lao People's Democratic Republic, and Thailand, using two indices—global extent (GE) and local density (LD)—as proposed by Mori and Smith (2013). We also analyze four different combinations of these indices to highlight the spatial structures of industrial agglomerations. Since industrial clusters often spread over administrative boundaries, the GE and LD indices—along with cluster mapping—display how the detected clusters fit into specific spatial structures.