Composição química e atividade antioxidante da polpa e resíduos de abacate 'Hass'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Oportunidades de melhorias no gerenciamento de resíduos sólidos em uma indústria de plásticos: um estudo de caso

Pós-graduação em Engenharia de Produção - FEB

Estudo da viabilidade econômica da coleta seletiva e da compostagem dos resíduos sólidos do município de Guaratinguetá (SP)

Pós-graduação em Engenharia Civil e Ambiental - FEB

Caracterização do compósito obtido a partir de borracha natural com negro e resíduos de couro aplicado como pisos e revestimentos

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Estudo da distribuição e do potencial de metilação do mercúrio em solos e sedimentos de áreas a serem inundadas para aproveitamento hidrelétrico: Vinicius Marques Gomes. -

Pós-graduação em Química - IQ

Caracterização de argilas usadas para produção de cerâmica vermelha e estudo das alterações nas suas propriedades pela adição de resíduos

Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)

A gestão de resíduos sólidos domiciliares: coleta seletiva e reciclagem - a experiência de Rio Claro (SP)

O estudo objetivou pesquisar a aplicabilidade de métodos alternativos para amenizar o problema da disposição dos resíduos sólidos urbanos. Especificamente nesse trabalho os objetivos foram direcionados no sentido de desenvolver esforços para viabilizar a reciclagem e o reaproveitamento de materiais, medidas essas, que aumentarão a vida útil dos aterros sanitários. Além disso, procuramos fazer um trabalho de Educação Ambiental para a população envolvida, em uma tentativa de incentivar uma mudança de hábitos. Para tanto, foi selecionado um bairro da cidade de Rio Claro (SP), como um projeto-piloto, onde foram observados os obstáculos e os procedimentos acertados, para uma aplicação em futuros projetos.

Contaminação das águas subterrâneas por resíduos de postos de combustíveis: uma abordagem no município de Rio Claro

The contamination of underground waters is a subject of great importance, since a lot of people use this kind of source for public supply. This paperwork manages with how gas stations can contaminate these waters and what are some remediation techniques, used nowadays to solve this problem. The contamination caused by the gas stations can have its origin in the underground storage tanks when they suffer corrosion and show leaking problems. It’s a topic of great relevance, because the hydrocarbons derivated from petroleum present in the fuels can stay for a long time in the environment. Besides that, an analyses of the risk of contamination by gas stations in the city of Rio Claro was made based on three parameters: density of the gas stations, depth of the underground water and hydraulic conductivity. To achieve such goal, maps were elaborated considering those parameters individually and considering the three of them together. Analyzing those maps, it was concluded see that the spots that represent the biggest risks of contamination in Rio Claro are located southeast and center-west.

Análise da variação da vazão e da concentração do metano presentes nos gases gerados no aterro sanitário de Rio Claro - SP

The study of the generation of landfill gas contributes to the understanding of the relationship between gas production and other parameters, such as time of disposal of waste and moisture (rainfall) and, thus, can subsidize the viability study for energy. This study aims to evaluate the interference of the time of disposal of waste and moisture (rainfall) in the production and composition of biogas generated at the landfill in Rio Claro - SP. As a result it was observed that for the landfill studied, the average percentage of methane in biogas ranged from 49.9% to 54.7%. It was found that moisture (rainfall) and the time of waste disposal are parameters which do not cause significant changes in methane concentration in biogas. However, when analyzed the flow of biogas, which had the maximum average value of 152.86m3/h and minimum average value of 15.47m3/h was observed great interference of moisture (rainfall) and the time of disposal of waste, because well of gas located in newer areas of the landfill showed higher values of flow rate than the areas where the landfill was the beginning of the arrangement. The same way, it was observed that in the dry season flow of biogas decreased in all drains gas analyzed

Gerenciamento dos resíduos de serviços de saúde da Unidade de Terapia Intensiva do Pronto Socorro do Hospital das Clínicas da Faculdade de Medicina de Botucatu – UNESP

Health care waste (HCW) is the type of waste that results from activities performed in health care services during care provision to humans or animals. Presently, according to RDC 306/04, issued in 2004 by Anvisa, and Resolution no. 358/05, by CONAMA, waste groups have the following classification: Group A (biological waste), Group B (chemical waste), Group C (waste containing radionucleotides), Group D (common waste) and Group E (piercing and cutting waste). In Brazil, 149 tons of wastes are collected every day, and HCW corresponds to approximately 1% to 3 % of that total. An efficient way to adequately manage HCW is through the Health Care Waste Management Plan (HCWMP), and it is possible to reduce the risk posed by certain materials in addition to ensuring disposal in an ecologically correct and economical fashion. According to the Pan-American Health Organization (PAHO), the management process enables health care establishments to adequately manage waste. Hence, there is greater control and reduction in the health risks caused by infectious or special waste, in addition to facilitated recycling, treatment, storage, transport and final disposal of solid hospital waste in an environmentally safe fashion. To evaluate the management of HCW of Groups A and D from the Intensive Care Unit of the University Emergency Hospital - FMB - UNESP in the city of Botucatu according to the guidelines presently in force. The waste flow was followed up, and during four random days in the month of September 2011, waste was quantified by estimating daily and monthly values, according to its classification. : In 2011, the University hospital has produced an average of 57,676.8 kg/month of biological and common waste. By adding Groups A and D, during the four days, approximately 209.8 Kg of waste (202.2 Kg of Group A and 7.6 Kg of Group D) were produced in the establishment under study, which... (Complete abstract click electronic access below)

Potencial de reciclagem dos resíduos sólidos urbanos do Município de Salto-SP

O excessivo consumo de recursos naturais renováveis e não renováveis combinado com a ineficiência e o desperdício de seu uso geram uma problemática muito atual nos centros urbanos: a grande produção de resíduos sólidos urbanos (RSU) e sua destinação inadequada. O presente trabalho caracterizou o RSU da cidade de Salto – SP a fim de quantificar os materiais recicláveis presentes nestes sólidos, bem como mapear sua origem e o perfil social de sua fonte geradora. Foram utilizadas quinze (15) classes de recicláveis, além do lixo orgânico e rejeitos. Dentre as classes estão: latas de aço; sucatas ferrosas; papel misto; papelão ondulado; embalagens longa vida; polietileno de alta densindade – PEAD; polipropileno – PP; poliestireno (PS); PET óleo; PET refrigerante; vidro; outros plásticos – PVC, materiais compostos de mais de um tipo de plástico e PS expandido; aparas plásticas; latinhas de alumínio e outros alumínios,. Os resultados apontam para uma grande geração de materias recicláveis no RSU em bairros de maior poder aquisitivo. O porcentual total de recicláveis na cidade foi de 38,38%

Remoção de cromo de resíduos de curtumes por argilitos da formação Corumbataí - SP

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Proposta metodológica para a correção do coeficiente de retorno de esgoto sanitário em unidades com sistemas de aproveitamento de água pluvial

The use of rainwater for non-potable purposes generates a reduction in the consumption of treated water, however, this reduction is not observed in the generation of wastewater, as this is independent of the water source. In Brazil, the pricing on the services of collection and treatment of sewage, in general, is based on the coefficient of return of the sewage disposal system, which has a relation sewer / water proportional to the consumption of treated water measured at the consumer unit. The use of rainwater originating from utilization systems infer on the coefficient, underestimating the volume of wastewater generated. Therefore, this study presents a methodology for setting the coefficient of return. Different roof areas, reservoir volumes and rates of water consumption situations were simulated. The behavior of adjustment of the coefficient of return were also analyzed for the average area per capita roof (m² / inhabitant) of Rio Claro - SP. As a result, it can be seen that the adjustment of the coefficient of return is directly proportional to the increase of the roof areas and the volumes of reservoirs, and inversely proportional to the total water demand. The corrected coefficient of return showed the minimum value of 0.83 and a maximum value of 1.45, this variation corresponds to the maximum ratio between the demands of total water and rainwater, since the exploitation of rain water should be used only for non-potable uses, according to NBR 15527 / 07. To the municipality of Rio Claro - SP was noted an adjustment of the coefficient of return ranging from 0.99 to 6.61

Análise teórica de caldeiras de incineração de resíduos sólidos municipais

The discussion about possibility of deployment of MSW incineration boilers to generate electricity in Brazil is the major topic of this paper. In this article are showed some advantages and disadvantages of this technology, as well as a methodology for the estimate of area for the main equipments of a steam generator for a boiler incineration

Diagnóstico da gestão e do gerenciamento dos resíduos eletroeletrônicos gerados no campus da Faculdade de Engenharia de Guaratinguetá/Unesp

Currently, in Brazil, the quantity and quality of new types of wastes, discarded without criteria in urban areas, has been responsible for considerable impacts on public health and the environment. According to a report prepared by the Institute of Applied Economic Research (IPEA), the country loses about U.S. $ 8 billion annually, due lack of waste recycling, which go directly into landfills or dumps. Among these solid wastes are waste electrical and electronic equipment (WEEE), whose characteristics are complex, by having in its composition substances of high value-added and other health hazards which require different treatment of household waste. Aiming to fill the gap in Brazilian environmental legislation, on 02/08/2010, was sanctioned the National Policy Solid Waste (Law No. 12,305), already regulated on 23/12/2010 (Decree No 7404), whose based on the following principles:reduction of waste generation and toxicity of shared responsibility, proper planning management, social inclusion of waste pickers and sustainable production and consumption. Given the above, this work presented here, aims generally present a diagnosis of the current situation of electronic waste generated in the Faculty of Engineering, Campus Guaratinguetá, FEG / UNESP, to provide data for management and management of these waste, based on sustainability, the economic losses and minimizing environmental impacts and public health related to the flow and the improper disposal of these wastes