PLANKTON AND SESTON STRUCTURE IN A SHALLOW, EUTROPHIC SUBTROPICAL CHINESE LAKE

The seasonal dynamics in the nutrient concentrations, chlorophyll-a amount (Chl-a), total algal volume (CV), Chl-a/CV ratio, seston structure were studied at two sampling stations in a shallow, highly eutrophicated subtropic lake (the Guozheng Hu area of the East Lake) on the plain of the middle basin of the Chang Jiang (the Yangtze River) of China. The lake ecosystem of the Guozheng Hu area is dominated by two planktivorous fishes (silver carp and bighead carp), phytoplankton and zooplankton. Macrophytes are extremely scarce in this area. Concentrations of the total dissolved nitrogen and phosphorus in the Guozheng Hu area in 1990 were very high. Fish yield, of which, more than 90 % was composed of silver carp and bighead carp in the Guozheng Hu area was very high (ca. 1140 kg/ha or 45.6 g/m3 in 1990). Grazing pressure by the fishes on the plankton community is considered to be rather strong. The annual average biomass of zooplankton was ca. 1/3 - 1/2 that of phytoplankton. On the average, dry matter in the living plankton only constituted ca. 3-7 % of the total dry seston, and plankton carbon only constituted ca. 5 - 10 % of the seston carbon. The present results indicate that, in the Guozheng Hu area of the East Lake, of the organic part of the seston, detritus is quantitatively an important constituent, while living plankton is only a very small component.

A new year message from Chinese Science Bulletin

Submitted by 阎军 (yanj@red.semi.ac.cn) on 2010-04-13T14:02:33Z No. of bitstreams: 1 A new year message from Chinese Science Bulletin.pdf: 888462 bytes, checksum: 950ebfe3456fc0d42f8d058a5d2b3979 (MD5)

Recent progresses of Si-based photonics in chinese main land

Si-based photonic materials and devices, including SiGe/Si quantum structures, SOI and InGaAs bonded on Si, PL of Si nanocrystals, SOI photonic crystal filter, Si based RCE (Resonant Cavity Enhanced) photodiodes, SOI TO (thermai-optical) switch matrix were investigated in Institute of Serniconductors, Chinese Academy of Sciences. The main results in recent years are presented in the paper. The mechanism of PL from Si NCs embedded in SiO2 matrix was studied, a greater contribution of the interface state recombination (PL peak in 850 similar to 900 nm) is associated with larger Si NCs and higher interface state density. Ge dots with density of order of 10(11) cm(-2) were obtained by UHV/CVD growth and 193 nm excimer laser annealing. SOI photonic crystal filter with resonant wavelength of 1598 nm and Q factor of 1140 was designed and made. Si based hybrid InGaAs RCE PD with eta of 34.4% and FWHM of 27 nut were achieved by MOCVD growth and bonding technology between InGaAs epitaxial and Si wafers. A 16x16 SOI optical switch matrix were designed and made. A new current driving circuit was used to improve the response speed of a 4x4 SOI rearrangeable nonblocking TO switch matrix, rising and failing time is 970 and 750 ns, respectively.

The Deposition and Burning Characteristics During Slagging Co-Firing Coal and Wood: Modeling and Numerical Simulation

Numerical analysis was used to study the deposition and burning characteristics of combining co-combustion with slagging combustion technologies in this paper. The pyrolysis and burning kinetic models of different fuels were implanted into the WBSF-PCC2 (wall burning and slag flow in pulverized co-combustion) computation code, and then the slagging and co-combustion characteristicsespecially the wall burning mechanism of different solid fuels and their effects on the whole burning behavior in the cylindrical combustor at different mixing ratios under the condition of keeping the heat input samewere simulated numerically. The results showed that adding wood powder at 25% mass fraction can increase the temperature at the initial stage of combustion, which is helpful to utilize the front space of the combustor. Adding wood powder at a 25% mass fraction can increase the reaction rate at the initial combustion stage; also, the coal ignitability is improved, and the burnout efficiency is enhanced by about 5% of suspension and deposition particles, which is helpful for coal particles to burn entirely and for combustion devices to minimize their dimensions or sizes. The results also showed that adding wood powder at a proper ratio is helpful to keep the combustion stability, not only because of the enhancement for the burning characteristics, but also because the running slag layer structure can be changed more continuously, which is very important for avoiding the abnormal slag accumulation in the slagging combustor. The theoretic analysis in this paper proves that unification of co-combustion and slagging combustion technologies is feasible, though more comprehensive and rigorous research is needed.

BIODIESEL PRODUCTION FROM DIFFERENT FEEDSTOCKS IN PILOT SCALE SYSTEM

In this study, the preparations of biodiesel from three different feedstocks, including rapeseed oil, high acidified Chinese wood oil and trap grease, were carried out in a pilot scale of 200 t yr(-1) biodiesel production system. The optimum operating conditions for transesterification of rapeseed oil in plug flow reactor were found to be as follows: the catalyst dosage is 1.2 wt%; the retention time is about 17 min; the bed temperature is 65 degrees C; the oil/methanol ratio is 1:6; the content of methyl ester is 96.33% under these conditions. A kind of ion exchange resin, a solid acid catalyst, filled in the fixed bed reactor was used as the esterification catalyst for the pretreating of high acidified oil. The acid value of Chinese wood oil could be reduced from 7 to 0.8 mg KOH.g(-1) after 88 min, the optimum operating conditions were obtained as follow: molar ratio of methanol to oil is about 6:1, the temperature of the fixed bed, 65 degrees C and the retention time, about 88 min. Also a kind of acidified oil, namely trap grease, with the acid value being 114 mg KOH.g(-1) could be equally converted to a good biodiesel product through this system. Generally, the refined biodiesel product generated through this system could meet China #0 Biodiesel Standard, as well as Germany Biodiesel Standard for most indexes. It indicates that the designed process in this system has a good adaptability for different kinds of oil.