Plastic bending behaviour and section moment capacities of mono-symmetric LiteSteel Beams with web openings

Recently developed cold-formed LiteSteel beam (LSB) sections have found increasing popularity in residential, industrial and commercial buildings due to their light weight and cost-effectiveness. Currently, there is significant interest in the use of LSB sections as flexural members in floor joist systems, although they can be used as flexural and compression members in a range of building systems. The plastic bending behaviour and section moment capacity of LSB sections with web holes can be assumed to differ from those without, but have yet to be investigated. Hence, no appropriate design rules for determining the section moment capacity of LSB sections with web holes are yet available. This paper presents the results of an investigation of the plastic bending behaviour and section moment capacity of LSB sections with circular web holes. LSB sections with varying circular hole diameters and degrees of spacing were considered. The paper also describes the simplified finite element (FE) modelling technique employed in this study, which incorporates all of the significant behavioural effects that influence the plastic bending behaviour and section moment capacity of these sections. The numerical and experimental test results and associated findings are also presented.

National climate change adaptation research plan : freshwater biodiversity

Climate change will alter the basic physical and chemical environment underpinning all life. Species will be affected differentially by these alterations, resulting in changes to the structure and composition of present-day freshwater ecological communities, with the potential to change the ways in which these ecosystems function and the services they provide.

Numerical method for predicting the elastic lateral distortional buckling moment of a mono-symmetric beam with web openings

When used as floor joists, the new mono-symmetric LiteSteel beam (LSB) sections require web openings to provide access for inspections and various services. The LSBs consist of two rectangular hollow flanges connected by a slender web, and are subjected to lateral distortional buckling effects in the intermediate span range. Their member capacity design formulae developed to date are based on their elastic lateral buckling moments, and only limited research has been undertaken to predict the elastic lateral buckling moments of LSBs with web openings. This paper addresses this research gap by reporting the development of web opening modelling techniques based on an equivalent reduced web thickness concept and a numerical method for predicting the elastic buckling moments of LSBs with circular web openings. The proposed numerical method was based on a formulation of the total potential energy of LSBs with circular web openings. The accuracy of the proposed method’s use with the aforementioned modelling techniques was verified through comparison of its results with those of finite strip and finite element analyses of various LSBs.

Member moment capacities of mono-symmetric LiteSteel beam floor joists with web openings

Recently developed cold-formed LiteSteel beam (LSB) sections have found increasing popularity in residential, industrial and commercial buildings due to their light weight and cost-effectiveness. Another beneficial characteristic is that they allow torsionally rigid rectangular flanges to be combined with economical fabrication processes. Currently, there is significant interest in the use of LSB sections as flexural members in floor joist systems. When used as floor joists, these sections require openings in the web to provide access for inspection and other services. At present, however, there is no design method available that provides accurate predictions of the moment capacities of LSBs with web openings. This paper presents the results of an investigation of the buckling and ultimate strength behaviour of LSB flexural members with web openings. A detailed fine element analysis (FEA)-based parametric study was conducted with the aim of developing appropriate design rules and making recommendations for the safe design of LSB floor joists. The results include the required moment capacity curves for LSB sections with a range of web opening combinations and spans and the development of appropriate design rules for the prediction of the ultimate moment capacities of LSBs with web openings.

Design of LiteSteel Beam floor joists with web opening using an equivalent web thickness method

The LiteSteel Beam (LSB) is an innovative cold-formed steel hollow flange section. When used as floor joists, the LSB sections require holes in the web to provide access for various services. In this study a detailed investigation was undertaken into the elastic lateral distortional buckling behaviour of LSBs with circular web openings subjected to a uniform moment using finite element analysis. Validated ideal finite element models were used first to study the effect of web holes on their elastic lateral distortional buckling behaviour. An equivalent web thickness method was then proposed using four different equations for the elastic buckling analyses of LSBs with web holes. It was found that two of them could be successfully used with approximate numerical models based on solid web elements with an equivalent reduced thickness to predict the elastic lateral distortional buckling moments.

User interface design for social web theme and opinion analysis

The Social Web is a torrent of real-time information and an emerging discipline is now focussed on harnessing this information flow for analysis of themes, opinions and sentiment. This short paper reports on early work on designing better user interfaces for end users in manipulating the outcomes from these analysis engines.

Falling through the web : implications for internet introverts

Is the brain evolving and adapting to new technological environments such as that of Silicon Valley? This paper examines changes that are being observed and studied relating to a possible correlation between ‘excessive’ focus on technology and the emergence of diagnosable social, physical and mental health dysfunction. The author explores the possible role of university staff and student services in the duty of care toward students. Would it not be more ethical to provide education on healthy technology use and to provide evidence based therapy for those students who fall through the web? Currently students end up being excluded from their courses. Many suffer from social anxiety and depression and lack confidence and social skills to find or hold down a job. Currently many “hibernate” in their rooms for months or years frequently in a state of despair.

Semantics-based web service discovery using information retrieval techniques

This paper demonstrates an experimental study that examines the accuracy of various information retrieval techniques for Web service discovery. The main goal of this research is to evaluate algorithms for semantic web service discovery. The evaluation is comprehensively benchmarked using more than 1,700 real-world WSDL documents from INEX 2010 Web Service Discovery Track dataset. For automatic search, we successfully use Latent Semantic Analysis and BM25 to perform Web service discovery. Moreover, we provide linking analysis which automatically links possible atomic Web services to meet the complex requirements of users. Our fusion engine recommends a final result to users. Our experiments show that linking analysis can improve the overall performance of Web service discovery. We also find that keyword-based search can quickly return results but it has limitation of understanding users’ goals.

Some reflections about P2M : the place of the mirror

The purpose of this paper is to provide some insights about P2M, and more specifically, to develop some thoughts about Project Management seen as a Mirror, a place for reflection…, between the Mission of organisation and its actual creation of Values (with s: a source of value for people, organisations and society). This place is the realm of complexity, of interactions between multiple variables, each of them having a specific time horizon and occupying a specific place, playing a specific role. Before developing this paper I would like to borrow to my colleague and friend, Professor Ohara, the following, part of a paper going to be presented at IPMA World Congress, in New Delhi later this year in November 2005. “P2M is the Japanese version of project & program management, which is the first standard guide for education and certification developed in 2001. A specific finding of P2M is characterized by “mission driven management of projects” or a program which harness complexity of problem solving observed in the interface between technical system and business model.” (Ohara, 2005, IPMA Conference, New Delhi) “The term of “mission” is a key word in the field of corporate strategy, where it expresses raison d’être or “value of business”. It is more specifically used for expressing “the client needs” in terms of a strategic business unit. The concept of mission is deemed to be a useful tool to share essential content of value and needs in message for complex project.” (Ohara, 2005, IPMA Conference, New Delhi) “Mission is considered as a significant “metamodel representation” by several reasons. First, it represents multiple values for aspiration. The central objective of mission initiative is profiling of ideality in the future from reality, which all stakeholders are glad to accept and share. Second, it shall be within a stretch of efforts, and not beyond or outside of the realization. Though it looks like unique, it has to depict a solid foundation. The pragmatic sense of equilibrium between innovation and adaptation is required for the mission. Third, it shall imply a rough sketch for solution to critical issues for problems in reality.” (Ohara, 2005, IPMA Conference, New Delhi) “Project modeling” idea has been introduced in P2M program management. A package of three project models of “scheme”, “system” and “service” are given as a reference type program. (Ohara, 2005, IPMA Conference, New Delhi) If these quotes apply to P2M, they are fully congruent with the results of the research undertaken and the resulting meta-model & meta-method developed by the CIMAP, ESC Lille Research Centre in Project & Program Management, since the 80’s. The paper starts by questioning the common Project Management (PM) paradigm. Then discussing the concept of Project, it argues that an alternative epistemological position should be taken to capture Page 2 / 11 the very nature of the PM field. Based on this, a development about “the need of modelling to understand” is proposed grounded on two theoretical roots. This leads to the conclusion that, in order to enables this modelling, a standard approach is necessary, but should be understood under the perspective of the Theory of Convention in order to facilitate a situational and contextual application.

The uses of multilingualism in digital culture : the case of inter-language linking

Language-use has proven to be the most complex and complicating of all Internet features, yet people and institutions invest enormously in language and crosslanguage features because they are fundamental to the success of the Internet’s past, present and future. The thesis takes into focus the developments of the latter – features that facilitate and signify linking between or across languages – both in their historical and current contexts. In the theoretical analysis, the conceptual platform of inter-language linking is developed to both accommodate efforts towards a new social complexity model for the co-evolution of languages and language content, as well as to create an open analytical space for language and cross-language related features of the Internet and beyond. The practiced uses of inter-language linking have changed over the last decades. Before and during the first years of the WWW, mechanisms of inter-language linking were at best important elements used to create new institutional or content arrangements, but on a large scale they were just insignificant. This has changed with the emergence of the WWW and its development into a web in which content in different languages co-evolve. The thesis traces the inter-language linking mechanisms that facilitated these dynamic changes by analysing what these linking mechanisms are, how their historical as well as current contexts can be understood and what kinds of cultural-economic innovation they enable and impede. The study discusses this alongside four empirical cases of bilingual or multilingual media use, ranging from television and web services for languages of smaller populations, to large-scale, multiple languages involving web ventures by the British Broadcasting Corporation, the Special Broadcasting Service Australia, Wikipedia and Google. To sum up, the thesis introduces the concepts of ‘inter-language linking’ and the ‘lateral web’ to model the social complexity and co-evolution of languages online. The resulting model reconsiders existing social complexity models in that it is the first that can explain the emergence of large-scale, networked co-evolution of languages and language content facilitated by the Internet and the WWW. Finally, the thesis argues that the Internet enables an open space for language and crosslanguage related features and investigates how far this process is facilitated by (1) amateurs and (2) human-algorithmic interaction cultures.

Wikileaks and the challenge of the “Fifth Estate”

The Time magazine ‘Person of theYear’ award is a venerable institution. Established by Time’s founder Henry Luce in 1927 as ‘Man of the Year’, it is an annual award given to ‘a person, couple, group, idea, place, or machine that ‘for better or for worse ... has done the most to influence the events of the year’ (Time 2002, p. 1). In 2010, the award was given to Mark Zuckerberg, the founder and CEO of the social networking site Facebook.There was, however, a strong campaign for the ‘People’s Choice’ award to be given to Julian Assange, the founder and editor-in-chief of Wikileaks, the online whistleblowing site. Earlier in the year Wikileaks had released more than 250 000 US government diplomatic cables through the internet, and the subsequent controver- sies around the actions of Wikileaks and Assange came to be known worldwide as ‘Cablegate’. The focus of this chapter is not on the implications of ‘Cablegate’ for international diplomacy, which continue to have great significance, but rather upon what the emergence of Wikileaks has meant for journalism, and whether it provides insights into the future of journalism. Both Facebook and Wikileaks, as well as social media platforms such as Twitter and YouTube, and independent media practices such as blogging, citizen journalism and crowdsourcing, are manifestations of the rise of social media, or what has also been termed web 2.0.The term ‘web 2.0’ was coined by Tim O’Reilly, and captures the rise of online social media platforms and services, that better realise the collaborative potential of digitally networked media. They do this by moving from the relatively static, top-down notions of interactivity that informed early internet development, towards more open and evolutionary models that better harness collective intelligence by enabling users to become the creators and collaborators in the development of online media content (Musser and O’Reilly 2007; Bruns 2008).

People, content, location : sweet spotting urban screens for situated engagement

A growing body of research is looking at ways to bring the processes and benefits of online deliberation to the places they are about and in turn allow a larger, targeted proportion of the urban public to have a voice, be heard, and engage in questions of city planning and design. Seeking to take advantage of the civic opportunities of situated engagement through public screens and mobile devices, our research informed a public urban screen content application DIS that we deployed and evaluated in a wide range of real world public and urban environments. For example, it is currently running on the renowned urban screen at Federation Square in Melbourne. We analysed the data from these user studies within a conceptual framework that positions situated engagement across three key parameters: people, content, and location. We propose a way to identify the sweet spot within the nexus of these parameters to help deploy and run interactive systems to maximise the quality of the situated engagement for civic and related deliberation purposes.

Users adoption of web 2.0 for knowledge management : position paper

Web 2.0 is a new generation of online applications on the web that permit people to collaborate and share information online. The use of such applications by employees in organisations enhances knowledge management (KM) in organisations. Employee involvement is a critical success factor as the concept is based on openness, engagement and collaboration between people where organizational knowledge is derived from employees experience, skills and best practices. Consequently, the employee's perception is recognized as being an important factor in web 2.0 adoption for KM and worthy of investigation. There are few studies that define and explore employee's enterprise 2.0 acceptance for KM. This paper provides a systematic review of the literature prior to demonstrating the findings as part of a preliminary conceptual model that represents the first stage of an ongoing research project that will end up with an empirical study. Reviewing available studies in technology acceptance, knowledge management and enterprise 2.0 literatures aids obtaining all potential user acceptance factors of enterprise 2.0. The preliminary conceptual model is a refinement of the theory of planed behaviour (TPB) as the user acceptance factors has been mapped into the TPB main components including behaviour attitude, subjective norms and behaviour control which are the determinant of individual's intention to a particular behaviour.

ACE research briefing paper 002: learning and adaptation in the business creation process

This year marks the completion of data collection for year three (Wave 3) of the CAUSEE study. This report uses data from the first three years and focuses on the process of learning and adaptation in the business creation process. Most start-ups need to change their business model, their product, their marketing plan, their market or something else about the business to be successful. PayPal changed their product at least five times, moving from handheld security, to enterprise apps, to consumer apps, to a digital wallet, to payments between handhelds before finally stumbling on the model that made the a multi-billion dollar company revolving around email-based payments. PayPal is not alone and anecdotes abounds of start-ups changing direction: Sysmantec started as an artificial intelligence company, Apple started selling plans to build computers and Microsoft tried to peddle compilers before licensing an operating system out of New Mexico. To what extent do Australian new ventures change and adapt as their ideas and business develop? As a longitudinal study, CAUSEE was designed specifically to observe development in the venture creation process. In this research briefing paper, we compare development over time of randomly sampled Nascent Firms (NF) and Young Firms(YF), concentrating on the surviving cases. We also compare NFs with YFs at each yearly interval. The 'high potential' over sample is not used in this report.