How students view the boundaries between their science and religious education concerning the origins of life and the universe

Internationally in secondary schools, lessons are typically taught by subject specialists, raising the question of how to accommodate teaching which bridges the sciences and humanities. This is the first study to look at how students make sense of the teaching they receive in two subjects (science and religious education) when one subject’s curriculum explicitly refers to cross-disciplinary study and the other does not. Interviews with 61 students in seven schools in England suggested that students perceive a permeable boundary between science and their learning in science lessons and also a permeable boundary between religion and their learning in RE lessons, yet perceive a firm boundary between science lessons and RE lessons. We concluded that it is unreasonable to expect students to transfer instruction about cross-disciplinary perspectives across such impermeable subject boundaries. Finally we consider the implications of these findings for the successful management of cross-disciplinary education.

Departmental differences in attitudes to special educational needs in the secondary school

As trends in favour of inclusion continue, questions arise concerning the extent to which teachers in mainstream schools feel prepared for the task of meeting pupils' special educational needs. Little previous research has considered how the subject taught impacts upon the attitudes of mainstream teachers towards pupils with special educational needs. In this article, Jean Ellins, research fellow at the University of Birmingham, and Jill Porter, senior lecturer at the University of Bath, report on their research into the attitudes of teachers in one mainstream secondary school. Building a detailed case study using documents, records of pupil progress, an interview and a questionnaire using a Likert-type attitude scale and open-ended questions, these researchers set out to explore distinctions between the attitudes of teachers working in different departments. Their findings suggest that the teachers of the core subjects, English, mathematics and science, had less positive attitudes than their colleagues. Further, pupils with special educational needs made least progress in science where teacher attitudes were the least positive. Jean Ellins and Jill Porter review the implications of these findings and make recommendations for future practice and further enquiry.

Quinine, mosquitoes and empire: reassembling malaria in British India, 1890-1910

The drug quinine figured as an object of enforced consumption in British India between the late 1890s and the 1910s, when the corresponding diagnostic category malaria itself was redefined as a mosquito-borne fever disease. This article details an overlapping milieu in which quinine, mosquitoes and malaria emerged as intrinsic components of shared and symbiotic histories. It combines insights from new imperial histories, constructivism in the histories of medicine and literature about non-humans in science studies to examine the ways in which histories of insects, drugs, disease and empire interacted and shaped one another. Firstly, it locates the production of historical intimacies between quinine, malaria and mosquitoes within the exigencies and apparatuses of imperial rule. In so doing, it explores the intersections between the worlds of colonial governance, medical knowledge, vernacular markets and pharmaceutical business. Secondly, it outlines ways to narrate characteristics and enabling properties of non-humans (such as quinines and mosquitoes) while retaining a constructivist critique of scientism and empire. Thirdly, it shows how empire itself was reshaped and reinforced while occasioning the proliferation of categories and entities like malaria, quinine and mosquitoes.

Urban warming in villages

Long term meteorological records (> 100 years) from stations associated with villages are generally classified as rural and assumed to have no urban influence. Using networks installed in two European villages, the local and microclimatic variations around two of these rural-village sites are examined. An annual average temperature difference ($\Delta{T}$) of 0.6 and 0.4 K was observed between the built-up village area and the current meteorological station in Geisenheim (Germany) and Haparanda (Sweden), respectively. Considerably larger values were recorded for the minimum temperatures and during summer. The spatial variations in temperature within the villages are of the same order as recorded over the past 100+ years in these villages (0.06 to 0.17 K/10 years). This suggests that the potential biases in the long records of rural-villages also warrant careful consideration like those of the more commonly studied large urban areas effects.

THE EXTENT OF MULTIDISCIPLINARY AUTHORSHIP OF ARTICLES ON SCIENTOMETRICS AND BIBLIOMETRICS IN BRAZIL

The publications in scientometrics and bibliometrics with Brazilian authorship expanded exponentially in the 1990-2006 period, reaching 13 times in the Web of Science database and 19.5 times in the Google Scholar database. This increase is rather superior to that of the total Brazilian scientific production in the same time period (5.6 times in the Web of Science). Some characteristics to be noticed in this rise are: 1) The total number of articles during this period was 197; in that, 78% were published in 57 Brazilian journals and 22% in 13 international journals. 2) The national and international articles averaged 4.3 and 5.9 citations/article, respectively; two journals stood out among these, the national Ciencia da Informacao (44 articles averaging 6.7 citations/article) and the international Scientometrics (32 articles averaging 6.2 citations/article). 3) The articles encompass an impressive participation of authors from areas other than information science; only one-fourth of the authors are bound to the information science field, the remaining ones being distributed among the areas of humanities/business administration, biology/biomedicine, health and hard sciences. The occurrence of adventitious authors at this level of multidisciplinarity is uncommon in science. However, the possible benefits of such patterns are not clear in view of a fragmented intercommunication among the authors, as noticed through the citations. The advantages of changing this trend and of using other scientometric and bibliometric databases, such as SciELO, to avoid an almost exclusive use of the Web of Science database, are discussed.

Short terms effects of air pollution from biomass burning in mucociliary clearance of Brazilian sugarcane cutters

Nasal mucociliary system is the first line of defense of the upper airways and may be affected acutely by exposure to particulate matter (PM) from biomass burning. Several epidemiologic studies have demonstrated a consistent association between levels of air pollution from biomass burning with increases in hospitalization for respiratory diseases and mortality. To determine the acute effects of exposure to particulate matter from biomass burning in nasal mucociliary transport by saccharin transit time (STT) test, we studied thirty-three non-smokers and twelve light smokers sugarcane cutters in two periods: pre-harvest season and 4 h after harvest at the first day after biomass burning. Lung function, exhaled carbon monoxide (CO), nasal symptoms questionnaire and mucociliary clearance (MC) were assessed. Exhaled CO was increased in smokers compared to non-smokers but did not change significantly after harvest. In contrast, SIT was similar between smokers and non-smokers and decreased significantly after harvest in both groups (p < 0.001). Exposure to PM from biomass burning did not influence nasal symptoms. Our results suggest that acute exposure to particulate matter from sugarcane burned affects mucociliary clearance in smokers and non-smokers workers in the absence of symptoms. (C) 2011 Elsevier Ltd. All rights reserved.

Task assignment optimization in SAP Extended WarehouseManagement

Nowadays in the world of mass consumption there is big demand for distributioncenters of bigger size. Managing such a center is a very complex and difficult taskregarding to the different processes and factors in a usual warehouse when we want tominimize the labor costs. Most of the workers’ working time is spent with travelingbetween source and destination points which cause deadheading. Even if a worker knowsthe structure of a warehouse well and because of that he or she can find the shortest pathbetween two points, it is still not guaranteed that there won’t be long traveling timebetween the locations of two consecutive tasks. We need optimal assignments betweentasks and workers.In the scientific literature Generalized Assignment Problem (GAP) is a wellknownproblem which deals with the assignment of m workers to n tasks consideringseveral constraints. The primary purpose of my thesis project was to choose a heuristics(genetic algorithm, tabu search or ant colony optimization) to be implemented into SAPExtended Warehouse Management (SAP EWM) by with task assignment will be moreeffective between tasks and resources.After system analysis I had to realize that due different constraints and businessdemands only 1:1 assingments are allowed in SAP EWM. Because of that I had to use adifferent and simpler approach – instead of the introduced heuristics – which could gainbetter assignments during the test phase in several cases. In the thesis I described indetails what ware the most important questions and problems which emerged during theplanning of my optimized assignment method.

Implementation of Video Monitoring In Aluminium Industry

The aim was to evaluate results and experiences from development of new technology, a training program and implementation of strategies for the use of a video exposure monitoring method, PIMEX. Starting point of this study is an increased incidence of asthma among workers in the aluminium industry. Exposure peaks of fumes are supposed to play an important role. PIMEX makes it possible to link used work practice, use of control technology, and so forth to peaks. Nine companies participated in the project, which was divided into three parts, development of PIMEX technology, production of training material, and training in use of equipment and related strategies. The use of the video exposure monitoring method PIMEX offers prerequisites supporting workers participation in safety activities. The experiences from the project reveal the importance of good timing of primary training, technology development, technical support, and follow up training. In spite of a delay of delivery of the new technology, representatives from the participating companies declared that the experiences showed that PIMEX gave an important contribution for effective control of hazards in the companies. Eight out of nine smelters used the PIMEX method as a part of a strategy for control of workers exposure to fumes in potrooms. Possibilities to conduct effective control measures were identified. This article describes experiences from implementation of a, for this branch, new method supporting workers participation for workplace improvements.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.

Health system context and implementation of evidence-based practices-development and validation of the Context Assessment for Community Health (COACH) tool for low- and middle-income settings

Background: The gap between what is known and what is practiced results in health service users not benefitting from advances in healthcare, and in unnecessary costs. A supportive context is considered a key element for successful implementation of evidence-based practices (EBP). There were no tools available for the systematic mapping of aspects of organizational context influencing the implementation of EBPs in low- and middle-income countries (LMICs). Thus, this project aimed to develop and psychometrically validate a tool for this purpose. Methods: The development of the Context Assessment for Community Health (COACH) tool was premised on the context dimension in the Promoting Action on Research Implementation in Health Services framework, and is a derivative product of the Alberta Context Tool. Its development was undertaken in Bangladesh, Vietnam, Uganda, South Africa and Nicaragua in six phases: (1) defining dimensions and draft tool development, (2) content validity amongst in-country expert panels, (3) content validity amongst international experts, (4) response process validity, (5) translation and (6) evaluation of psychometric properties amongst 690 health workers in the five countries. Results: The tool was validated for use amongst physicians, nurse/midwives and community health workers. The six phases of development resulted in a good fit between the theoretical dimensions of the COACH tool and its psychometric properties. The tool has 49 items measuring eight aspects of context: Resources, Community engagement, Commitment to work, Informal payment, Leadership, Work culture, Monitoring services for action and Sources of knowledge. Conclusions: Aspects of organizational context that were identified as influencing the implementation of EBPs in high-income settings were also found to be relevant in LMICs. However, there were additional aspects of context of relevance in LMICs specifically Resources, Community engagement, Commitment to work and Informal payment. Use of the COACH tool will allow for systematic description of the local healthcare context prior implementing healthcare interventions to allow for tailoring implementation strategies or as part of the evaluation of implementing healthcare interventions and thus allow for deeper insights into the process of implementing EBPs in LMICs.

Modelling the Provenance of Data in Autonomous Systems

Determining the provenance of data, i.e. the process that led to that data, is vital in many disciplines. For example, in science, the process that produced a given result must be demonstrably rigorous for the result to be deemed reliable. A provenance system supports applications in recording adequate documentation about process executions to answer queries regarding provenance, and provides functionality to perform those queries. Several provenance systems are being developed, but all focus on systems in which the components are textitreactive, for example Web Services that act on the basis of a request, job submission system, etc. This limitation means that questions regarding the motives of autonomous actors, or textitagents, in such systems remain unanswerable in the general case. Such questions include: who was ultimately responsible for a given effect, what was their reason for initiating the process and does the effect of a process match what was intended to occur by those initiating the process? In this paper, we address this limitation by integrating two solutions: a generic, re-usable framework for representing the provenance of data in service-oriented architectures and a model for describing the goal-oriented delegation and engagement of agents in multi-agent systems. Using these solutions, we present algorithms to answer common questions regarding responsibility and success of a process and evaluate the approach with a simulated healthcare example.

Charles W. Merideth in Atrium Building

Charles W. Merideth is pictured with three others in the Atrium Building at City Tech. Charles W. Merideth was the sixth president of the City Tech. He was formerly installed on October 19, 1990. Before coming to City Tech, Merideth had a long career in science and higher education. Under Merideth, the College expanded the number of baccalaureate programs offered by the College.

Towards a measure of income inequality freed from the volatility caused by variations in the rate of unemployment

By mixing together inequalities based on cyclical variables, such as unemployment, and on structural variables, such as education, usual measurements of income inequality add objects of a di§erent economic nature. Since jobs are not acquired or lost as fast as education or skills, this aggreagation leads to a loss of relavant economic information. Here I propose a di§erent procedure for the calculation of inequality. The procedure uses economic theory to construct an inequality measure of a long-run character, the calculation of which can be performed, though, with just one set of cross-sectional observations. Technically, the procedure is based on the uniqueness of the invariant distribution of wage o§ers in a job-search model. Workers should be pre-grouped by the distribution of wage o§ers they see, and only between-group inequalities should be considered. This construction incorporates the fact that the average wages of all workers in the same group tend to be equalized by the continuous turnover in the job market.