A Romano-British settlement with ovens and field system at Theobalds Road, Wivelsfield, East Sussex

Excavation west of Wivelsfield, East Sussex, revealed part of an early Romano-British settlement. One of the round-houses may have had a non-domestic, possibly ritual, function. The settlement appears to have been subsequently incorporated within a rectilinear arrangement of field/enclosure ditches. Along the edge of one of these ditches were built a series of features interpreted as ovens, of varying form and likely use, from which charred waste from cereal processing and charcoal from coppiced woodland were recovered.

Railway promotion in Victorian Britain: engineering triumph or waste of capital?

A key issue in UK railway history is whether the railway system was an efficient response to the traffic requirements of the economy. The UK railway system was constructed entirely by private enterprise with minimal state subsidies. This chapter considers whether the railway system was 'over-built' because the government ignored the advice of the Railway Committee of the Board of Trade. The chapter suggests that the system was over-built by about 35 per cent. The causes of this over-building are investigated and are found to be mainly social and political failures arising from distrust between MPs and civil servants and public pressure on local MPs to ensure that their constituencies were well served by railways.

Dietary Quality Index and Associated Factors among Adolescents of the State of Sao Paulo, Brazil

Objective To assess dietary quality and associated factors in adolescents. Study design We conducted a population-based cross-sectional study in a sample of 1584 adolescents living in areas of the state of Sao Paulo, Brazil. Dietary intake was measured with the 24-hour recall method, and dietary quality was assessed by means of the Health Eating Index (HEI), adapted to fit to the local requirements. Linear regression analyses were performed to assess the association between the HEI and demographic, socioeconomic, and lifestyle variables. Results A total of 97.1% of the adolescents studied had an inadequate diet or a diet that needed improvement. The mean overall HEI score was 59.7. Lower mean HEI scores were found for fruits, dairy products, and vegetables. Male adolescents who were physically active and lived in a house or apartment had higher HEI scores. The multiple regression analyses showed that the quality of the diet improved as age decreased. Adolescents who lived in houses or apartments had higher HEI scores than adolescents living in shacks or slums, regardless of age and energy intake. Conclusions Dietary quality is associated with income and age. A better understanding of the factors associated can provide input to the formulation of policies and development of nutritional actions. (J Pediatr 2010; 156:456-60).

Evaluation of Recycled Tiles and OSB Ceiling Materials in Closed Broiler House Prototypes

This study aimed at evaluating the thermal performance of a modular ceiling system for poultry houses. The reduced- and distorted-scale prototypes used ceiling modules made of reforested wood and were covered with recycled long-life package tiles. The following parameters were measured for 21 days: the internal surface temperature (ST), globe temperature and humidity index (WBGT), and radiant heat load (RHL). Measurements were made at times of highest heat load (11:00 am, 13:00 pm, and 03:00 pm). Collected data were analyzed by ""R"" statistics software. Means were compared by multiple comparison test (Tukey) and linear regression was performed, both at 5% significance level. The results showed that the prototype with the ceiling was more efficient to reduce internal tile surface temperature; however, this was not sufficient to provide a comfortable environment for broilers during the growout. Therefore, other techniques to provide proper cooling are required in addition to the ceiling

The Application Of Renewable Energy For Prefab Houses In Germany

Within the framework of the REBUS project the German building industry has been investigated regarding their energy concepts. The intention was to evaluatethe establishment of renewable energy sources on the German market for new built houses and prefab houses in particular. For this purpose the products of 85manufacturers of prefab houses have been analyzed. Of special interest was the applicationof heating and hot water systems driven by solar energy and biomass. The results show that both techniques are well accepted and established. Almost 90% of themanufacturers offer solar systems on request and almost 70% heating systems based on Pellets. 24% offered solar and 7% as standard options in their range. From theachieved figures the potential of the Swedish market can be worked out. Strategies to introduce renewable energy to a greater extent to Swedish house manufacturers and builders might also be found.

Thermal energy storage in Swedish single family houses : a case study

In a Nordic climate, space heating (SH) and domestic hot water (DHW) used in buildings constitute a considerable part of the total energy use in the country. For 2010, energy used for SH and DHW amounted to almost 90 TWh in Sweden which corresponds to 60 % of the energy used in the residential and service sector, or almost 24 % of the total final energy use for the country. Storing heat and cold with the use of thermal energy storage (TES) can be one way of increasing the energy efficiency of a building by opening up possibilities for alternative sources of heat or cold through a reduced mismatch between supply and demand. Thermal energy storage without the use of specific control systems are said to be passive and different applications using passive TES have been shown to increase energy efficiency and/or reduce power peaks of systems supplying the heating and cooling needs of buildings, as well as having an effect on the indoor climate. Results are however not consistent between studies and focus tend to be on the reduction of cooling energy or cooling power peaks. In this paper, passive TES introduced through an increased thermal mass in the building envelope to two single family houses with different insulation standard is investigated with building energy simulations. A Nordic climate is used and the focus of this study is both on the reduction of space heating demand and space heating power, as well as on reduction of excess temperatures in residential single family houses without active cooling systems. Care is taken to keep the building envelope characteristics other than the thermal mass equal for all cases so that any observations made can be derived to the change in thermal mass. Results show that increasing the sensible thermal mass in a single family house can reduce the heating demand only slightly (1-4 %) and reduce excess temperatures (temperatures above 24 degrees C) by up to 20 %. Adding a layer of PCM (phase change materials) to the light building construction can give similar reduction in heating demand and excess temperatures, however the phase change temperature is important for the results.

The attractiveness of the work is affected when production of handcrafted log houses moves indoors

Viewed from a historical perspective, a shift has occurred within the forestry and wood sector towards indoor work. In Sweden, the production of handcrafted log houses has now also begun to move indoors. With a point of departure in development processes within the log house sector involving working indoors, education, work attractiveness, between 2001-2005, the aim of this study was to compare indoor work with outdoor work, based on log house builders' experience of working on handcrafted log houses. Methods used in the interactive development project involving apprentices, experienced log house builders and researchers, were participation with continuous documentation of experiences and opinions; questions; interviews; and measurement of the work environment. The Attractive Work Model has been used in order to analyse perceptions and values. The changes, 15 out of 22 areas, were perceived both negatively and positively. Therefore, it can not be said that working on traditional, handcrafted log houses becomes more attractive if it is moved indoors. The majority wanted to work both outdoors and indoors, while most of the others only wanted to work outdoors. The results indicate that there is scope for developing more attractive work indoors by utilising experiences from log house builders and closely related activities such as the forestry and wood sector. Changes made within one area of work attractiveness affect other areas. Further research is needed both with regard to comparisons between indoor and outdoor work and regarding the interaction between the areas that are identified in the Attractive Work Model.

Testing of combined heating systems for small houses: Improved procedures for whole system test methods : Deliverable 2.3

Dynamic system test methods for heating systems were developed and applied by the institutes SERC and SP from Sweden, INES from France and SPF from Switzerland already before the MacSheep project started. These test methods followed the same principle: a complete heating system – including heat generators, storage, control etc., is installed on the test rig; the test rig software and hardware simulates and emulates the heat load for space heating and domestic hot water of a single family house, while the unit under test has to act autonomously to cover the heat demand during a representative test cycle. Within the work package 2 of the MacSheep project these similar – but different – test methods were harmonized and improved. The work undertaken includes:  • Harmonization of the physical boundaries of the unit under test. • Harmonization of the boundary conditions of climate and load. • Definition of an approach to reach identical space heat load in combination with an autonomous control of the space heat distribution by the unit under test. • Derivation and validation of new six day and a twelve day test profiles for direct extrapolation of test results.   The new harmonized test method combines the advantages of the different methods that existed before the MacSheep project. The new method is a benchmark test, which means that the load for space heating and domestic hot water preparation will be identical for all tested systems, and that the result is representative for the performance of the system over a whole year. Thus, no modelling and simulation of the tested system is needed in order to obtain the benchmark results for a yearly cycle. The method is thus also applicable to products for which simulation models are not available yet. Some of the advantages of the new whole system test method and performance rating compared to the testing and energy rating of single components are:  • Interaction between the different components of a heating system, e.g. storage, solar collector circuit, heat pump, control, etc. are included and evaluated in this test. • Dynamic effects are included and influence the result just as they influence the annual performance in the field. • Heat losses are influencing the results in a more realistic way, since they are evaluated under "real installed" and representative part-load conditions rather than under single component steady state conditions.   The described method is also suited for the development process of new systems, where it replaces time-consuming and costly field testing with the advantage of a higher accuracy of the measured data (compared to the typically used measurement equipment in field tests) and identical, thus comparable boundary conditions. Thus, the method can be used for system optimization in the test bench under realistic operative conditions, i.e. under relevant operating environment in the lab.   This report describes the physical boundaries of the tested systems, as well as the test procedures and the requirements for both the unit under test and the test facility. The new six day and twelve day test profiles are also described as are the validation results.

Energy efficient and economic renovation of residential buildings with low-temperature heating and air heat recovery

With the building sector accounting for around 40% of the total energy consumption in the EU, energy efficiency in buildings is and continues to be an important issue. Great progress has been made in reducing the energy consumption in new buildings, but the large stock of existing buildings with poor energy performance is probably an even more crucial area of focus. This thesis deals with energy efficiency measures that can be suitable for renovation of existing houses, particularly low-temperature heating systems and ventilation systems with heat recovery. The energy performance, environmental impact and costs are evaluated for a range of system combinations, for small and large houses with various heating demands and for different climates in Europe. The results were derived through simulation with energy calculation tools. Low-temperature heating and air heat recovery were both found to be promising with regard to increasing energy efficiency in European houses. These solutions proved particularly effective in Northern Europe as low-temperature heating and air heat recovery have a greater impact in cold climates and on houses with high heating demands. The performance of heat pumps, both with outdoor air and exhaust air, was seen to improve with low-temperature heating. The choice between an exhaust air heat pump and a ventilation system with heat recovery is likely to depend on case specific conditions, but both choices are more cost-effective and have a lower environmental impact than systems without heat recovery. The advantage of the heat pump is that it can be used all year round, given that it produces DHW. Economic and environmental aspects of energy efficiency measures do not always harmonize. On the one hand, lower costs can sometimes mean larger environmental impact; on the other hand there can be divergence between different environmental aspects. This makes it difficult to define financial subsidies to promote energy efficiency measures.

Making Energy Interventions more Effective : Situation, Interaction, and Precondition

A main purpose of this paper is to propose to policy makers, building professionals, and other non-social scientists a way to make energy interventions more culturally informed and, thereby, more effective. The case study on house purchasers gives an ample illustration of the richer results that can be achieved by paying attention to three aspects of energy efficiency initiatives: the contexts and situations of choice in each particular case, the interaction among relevant social actors, and the culture-specific preconditions for choice. Research on how purchasers of new pre-fabricated houses in Sweden choose their heating system show how such decisions tend to fall between two stools. Furthermore, the organizational structure of housing companies frames house purchasers' decision making. An important result is that energy saving or conversion measures must be promoted at an early stage amongst those who plan and construct buildings (rather than later amongst dwellers and energy end users).

Workplace "bargaining" and the wages/working time nexus: counting the cost of decentralisation

The impact of deregulation on dispersion of earnings in Victoria has been
acknowledged in the findings of the recent task force enquiry into industrial relations in Victoria. This paper argues that the link between hours worked and rates of pay has played a significant role in this increased dispersion. Drawing upon detailed analysis of hours and wages in Victorian agreements, data is presented on declining take-home pay flowing from the loss of penalty rates. This, we argue, is attributable to
the lack of substantive and procedural protections available to Victorian workers under schedule 1A of the Workplace Relations Act, and formerly under the Victorian Employee Relations Act, 1992. We contrast these findings with collective agreements trading off penalty rates certified by the Australian Industrial Relations Commission, and Australian Workplace Agreements approved by the Office of the Employment
Advocate. We conclude by suggesting there is a scale of fair outcomes attached to the wages/hours trade-off, directly attributable to the various institutional mechanisms now influencing Australian wage determination.

The Victorian Certificate of Education - a gendered affair?

Drawing on data from the Victorian Certificate of Education (1994- 1999), this paper examines whether gender differences in Mathematics still exist. The discussion is developed in the context of ongoing debates about girls' and boys' comparative performance, and about modification in Year 11 and 12 curriculum and assessment. The paper identifies some of the subtle issues that lie behind the statistics, and school to work inequalities that continue to exist.

Change and stasis in schoolmusic education in Victoria: the past informing the future

This article reviews the current state of music education in Victoria in terms of both past and present issues. It is argued that many of these issues are the result of change and stasis that have occurred over the past 150 years of school music in Victoria. The principal issues that confront the present generation of music educators and policy makers are the role and place of music in school education and the provision of music teachers for government schools. Both of these issues are discussed in terms of the historical development of music in Victorian schools and it is demonstrated that many of the problems associated with these issues are either cyclical in nature, or have been endemic and simply never adequately addressed. It is suggested that one of the principal challenges to be faced in the government school sector at present is to retain the integrity of music as a discrete subject area in face of the current trend towards a generically-based arts curriculum. There is often a tendency in education to adopt an overly critical and even pessimistic approach to what are perceived as long-standing and seemingly insolvable problems. However, a counter-balancing factor is the rich heritage of Victorian music education which provides the basis for a more optimistic outlook. An important aspect of this heritage is the example of many outstanding music educators in Victoria and elsewhere. It is argued that a knowledge of such past achievements as well as a fuller appreciation of the historical development of music education policies and practices should provide a more informed and rational basis from which to decide the future course of music education in Victoria.

Corners, squares and urban identities: perceptions, attitudes and values

In February 2000, the new Victorian Labor Government announced that they were removing the western shard from Lab Architecture Studio's winning Melbourne Federation Square design. then under construction. The specific 'contested terrain' at the intersection of Flinders Street and Swanston Street Walk. Melbourne, allows the exploration of the politics of place construction over time, through an examination of Young and Jackson's Hotel [1861]. St Paul's Cathedral [1886). Flinders Street Station [1912]. the Westin Hotel [1999) and Federation Square. This site brings together architectural and social history, questions public space and identity, and looks at Melburnian's perceptions, attitudes and values. It further demonstrates that the fragmentation of the professions, and fragmentary histories. lead to the preservation of 'bits' of architecture and the destruction of the urban/landscape context, jeopardizing the Identity of place.