Da modelação matemática à simulação computacional: a experimentação matemática no ensino

Tese de Doutoramento em Ciências (área de especialização em Matemática).

Da modelação matemática à simulação computacional: a experimentação matemática no ensino

Tese de Doutoramento em Ciências (área de especialização em Matemática).

Measuring university-to-work success: development of a new scale

Purpose – The purpose of this paper is to develop a subjective multidimensional measure of early career success during university-to-work transition. Design/methodology/approach – The construct of university-to-work success (UWS) was defined in terms of intrinsic and extrinsic career outcomes, and a three-stage study was conducted to create a new scale. Findings – A preliminary set of items was developed and tested by judges. Results showed the items had good content validity. Factor analyses indicated a four-factor structure and a second-order model with subscales to assess: career insertion and satisfaction, confidence in career future, income and financial independence, and adaptation to work. Third, the authors sought to confirm the hypothesized model examining the comparative fit of the scale and two alternative models. Results showed that fits for both the first- and second-order models were acceptable. Research limitations/implications – The proposed model has sound psychometric qualities, although the validated version of the scale was not able to incorporate all constructs envisaged by the initial theoretical model. Results indicated some direction for further refinement. Practical implications – The scale could be used as a tool for self-assessment or as an outcome measure to assess the efficacy of university-to-work programs in applied settings. Originality/value – This study provides a useful single measure to assess early career success during the university-to-work transition, and might facilitate testing of causal models which could help identify factors relevant for successful transition.

Does nitrogen availability have greater control over the formation of tropical heath forests than water stress?A hypothesis based on nitrogen isotope ratios

Global scale analyses of soil and foliage δ15N have found positive relationships between δ15N and ecosystem N loss (suggesting an open N cycle) and a negative relationship between δ15N and water availability. We show here that soils and leaves from tropical heath forests are depleted in 15N relative to 'typical' forests suggesting that they have a tight N cycle and are therefore limited by N rather than by, often suggested, water availability.

Intermetallic layer formation and influence in solder joints reliability

Dissertação de mestrado integrado em Materials Engineering

Myxomycetes collection preserved in the herbarium of the Federal University of Roraima (Brazil)

First records of myxomycetes in the North region of Brazil go back to the 19th century. Nevertheless, the myxobiota of this region is still largely unexplored, with only 42 species recorded, distributed in 20 genera and seven families. The objectives of this paper were to characterize the Myxomycetes collection of the Herbarium of the Federal University of Roraima (UFRR) and to add new records for the myxobiota of this State. The collection holds specimens collected in fragments of Open Ombrophilous Forest, Seasonal Semi-deciduous Forest, Riparian Forest, deforested areas and urban home gardens in the state of Roraima. The 157 exsiccates were analyzed and identified or redetermined based on identification keys, descriptions and illustrations. The collection is in good conditions of preservation and includes all subclasses of Myxomycetes, 83% of its orders, 50% of its families, and 20 species. Trichiales, with one family, three genera and six species, represents 62% of all exsiccates. Cribraria aff. splendens, Metatrichia vesparia, Physarella oblonga, Stemonaria longa and Stemonitis splendens are new records for Roraima and Arcyria obvelata, Comatricha pulchella, Stemonitis pallida and Stemonitopsis aequalis are referred for the first time in the Northern Region, enlarging the knowledge of the Brazilian geographic distribution of these species.

Electrosynthesis of heterocyclic compounds by radical cyclization in environmentally friendly media

We investigated the reductive intramolecular cyclization of bromopropargyl ethers derivatives, catalyzed by electrogenerated (1,4,8,11-tetramethyl-1,4,8,11-tetraaza-cyclotetradecane)nickel(I), [Ni(tmc)]+ as the catalysts in N,N,N-trimethyl-N-(2- hydroxyethyl)ammonium bis(trifluoromethylsulfonyl)imide,[N1 1 1 2(OH)][NTf2] and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C2mim][NTf2] by cyclic voltammetry and controlled-potential electrolysis. The results show that the reaction leads to the formation of the expected cyclic compounds, which are important intermediates in the synthesis of natural products with possible biological activities.

Electronic structure and optical signatures of semiconducting transition metal dichalcogenide nanosheets

CONSPECTUS: Two-dimensional (2D) crystals derived from transition metal dichalcogenides (TMDs) are intriguing materials that offer a unique platform to study fundamental physical phenomena as well as to explore development of novel devices. Semiconducting group 6 TMDs such as MoS2 and WSe2 are known for their large optical absorption coefficient and their potential for high efficiency photovoltaics and photodetectors. Monolayer sheets of these compounds are flexible, stretchable, and soft semiconductors with a direct band gap in contrast to their well-known bulk crystals that are rigid and hard indirect gap semiconductors. Recent intense research has been motivated by the distinct electrical, optical, and mechanical properties of these TMD crystals in the ultimate thickness regime. As a semiconductor with a band gap in the visible to near-IR frequencies, these 2D MX2 materials (M = Mo, W; X = S, Se) exhibit distinct excitonic absorption and emission features. In this Account, we discuss how optical spectroscopy of these materials allows investigation of their electronic properties and the relaxation dynamics of excitons. We first discuss the basic electronic structure of 2D TMDs highlighting the key features of the dispersion relation. With the help of theoretical calculations, we further discuss how photoluminescence energy of direct and indirect excitons provide a guide to understanding the evolution of the electronic structure as a function of the number of layers. We also highlight the behavior of the two competing conduction valleys and their role in the optical processes. Intercalation of group 6 TMDs by alkali metals results in the structural phase transformation with corresponding semiconductor-to-metal transition. Monolayer TMDs obtained by intercalation-assisted exfoliation retains the metastable metallic phase. Mild annealing, however, destabilizes the metastable phase and gradually restores the original semiconducting phase. Interestingly, the semiconducting 2H phase, metallic 1T phase, and a charge-density-wave-like 1T' phase can coexist within a single crystalline monolayer sheet. We further discuss the electronic properties of the restacked films of chemically exfoliated MoS2. Finally, we focus on the strong optical absorption and related exciton relaxation in monolayer and bilayer MX2. Monolayer MX2 absorbs as much as 30% of incident photons in the blue region of the visible light despite being atomically thin. This giant absorption is attributed to nesting of the conduction and valence bands, which leads to diversion of optical conductivity. We describe how the relaxation pathway of excitons depends strongly on the excitation energy. Excitation at the band nesting region is of unique significance because it leads to relaxation of electrons and holes with opposite momentum and spontaneous formation of indirect excitons.

Evolution of the functional properties of titanium–silver thin films for biomedical applications: Influence of in-vacuum annealing

In this work, the thermal stability of TiAgx thin films, deposited by magnetron sputtering, was evaluated, envisaging their application in biomedical devices, namely as electrodes for biosignal acquisition. Based on the composition and microstructural characterization, a set of four representative TiAgx thin films was selected in order to infer whether they are thermally stable in terms of functional properties. In order to achieve this purpose, the structural and morphological evolution of the films with annealing temperature was correlated with their electrical, mechanical and thermal properties. Two distinct zones were identified and two samples from each zone were extensively analysed. In the first zone (zone I), Ti was the main component (Ti-rich zone) while in the second, zone II, the Ag content was more significant. The selected samples were annealed in vacuum at four different temperatures up to 500 oC. For the samples produced within zone I, small microstructural changes were observed due to the recrystallization of the Ti structure and grain size increment. Also, no significant changes were observed with annealing temperature regarding the f l ’ functional properties, being thermally stable up to 500 oC. For higher Ag contents (zone II) the energy supplied by thermal treatments was sufficient to activate the crystallization of Ti-Ag intermetallic phases. A strong increase of the grain size of these phases was also reported. The structural and morphological organization proved to be determinant for the physical responses of the TiAgx system. The hardness and Y g’s modulus were significantly improved with the formation of the intermetallic phases. The silver addition and annealing treatments also played an important role in the electrical conductivity of the films, which was once again improved by the formation of Ti-Ag phases. The thermal diffusivity of the films was practically unchanged with the heat-treatment. This set of results shows that this intermetallic-like thin film system has good thermal stability up to high temperatures (as high as 500 oC), which in case of the highest Ag content zone is particularly evident for electrical and mechanical properties, showing an important improvement. Hardness increases about three times, while resistivity values become half of those from the lowest Ag contents zone. These set of characteristics are consistent with the targeted applications, namely in terms of biomedical sensing devices.

Multifunctional Ti–Me (Me=Al, Cu) thin film systems for biomedical sensing devices

Ti-Me binary intermetallic thin films based on a titanium matrix doped with increasing amounts of Me (Me = Al, Cu) were prepared by magnetron sputtering (under similar conditions), aiming their application in biomedical sensing devices. The differences observed on the composition and on the micro(structural) features of the films, attributed to changes in the discharge characteristics, were correlated with the electrical properties of the intermetallic systems (Ti-Al and Ti-Cu). For the same Me exposed areas placed on the Ti target (ranging from 0.25 cm2 to 20 cm2) the Cu content increased from 3.5 at.% to 71.7 at.% in the Ti-Cu system and the Al content, in Ti-Al films, ranged from 11 to 45 at.%. The structural characterization evidenced the formation of metastable Ti-Me intermetallic phases for Al/Ti atomic ratios above 0.20 and for Cu/Ti ratios above 0.25. For lower Me concentrations, the effect of the α-Ti(Me) structure domains the overall structure. With the increase amount of the Me into Ti structure a clear trend for amorphization was observed. For both systems it was observed a significant decrease of the electrical resistivity with increasing Me/Ti atomic ratios (higher than 0.5 for Al/Ti atomic ratio and higher than 1.3 for Cu/Ti atomic ratio). Although similar trends were observed in the resistivity evolution for both systems, the Ti-Cu films presented lower resistivity values in comparison to Ti-Al system.

Clinical diagnosis of 80 cases of dementia in a university hospital

OBJECTIVE: This study aims to estimate the prevalence of dementia subtypes and to assess the socio-demographic data of patients attending the outpatient clinic of dementia at Hospital das Clínicas from January 2008 to December 2009, in the city of Goiânia-GO, Brazil. METHODS: Procedures provided for diagnosis included physical and neurological examination, laboratory tests, neuroimaging and DSM-IV. The functional capacity and level of cognitive deficit were assessed by Pfeffer Functional Activities Questionnaire (Pfeffer-FAQ) and Mini-Mental State Examination (MMSE), respectively. RESULTS: Eighty patients met the criteria for dementia. The mean age was 63.48 (± 16.85) years old, the schooling was 3.30 (± 3.59) years old, the MMSE was 13.89 (± 7.79) and Pfeffer 17.73 (± 9.76). The Vascular Dementia (VD; 17.5%) was the most frequent cause of dementia, followed by Lewy body dementia (LBD) and Alzheimer's disease (AD) (12.25%). CONCLUSION: Considering entire sample and only the elderly over 60 years, VD, AD and LBD are the most common subtypes observed at both groups. Further epidemiological studies are necessary to confirm such rates, which may have a considerable impact on the organization and planning of healthcare services in our country.

Risk factors for atherosclerosis in students of a private university in São Paulo - Brazil

OBJECTIVE: To characterize the risk profile for atherosclerosis (AS) in adolescents and young adults of a private university in São Paulo. METHODS: Clinical, nutritional, and laboratory parameters were evaluated in 209 students of both genders aged 17 to 25 years. In addition to determination of the lipid profile, the association of its abnormal values with other risk factors for AS was also investigated. RESULTS: Increased levels of total cholesterol, LDL-C and triglycerides (TG) were observed in 9.1%, 7.6% and 16.3% of the students, respectively, and decreased levels of HDL-C in 8.6% of them. Prevalence of the remaining risk factors analyzed was elevated: sedentary life style (78.9%); high intake of total fat (77.5%); high cholesterol intake (35.9%); smoking, hypertension (15.8%) and obesity (7.2%). There was an association between elevated LDL-C and TG levels and sedentary life style and body mass index. CONCLUSION: The high prevalence of risk factors for AS in young individuals draws attention to the need for adopting preventive plans.

Do cardiologists at a university hospital adopt the guidelines for the treatment of heart failure?

OBJECTIVE: To verify whether the guidelines for the treatment of heart failure have been adopted at a university hospital. The guidelines recommend the following: use of angiotensin-converting enzyme inhibitors for all patients with systolic ventricular dysfunction, use of digitalis and diuretics for symptomatic patients, use of beta-blockers for patients in functional classes II or III, use of spironolactone for patients in functional classes III or IV. METHODS: We analyzed the prescriptions of 199 patients. All these patients had ejection fraction (EF) <=0.50, their ages ranged from 25 to 86 years, and 142 were males. Cardiomyopathy was the most frequent diagnosis: 67 (33.6%) patients had dilated cardiomyopathy, 65 (32.6%) had ischemic cardiomyopathy. RESULTS: Angiotensin-converting enzyme inhibitors were prescribed for 93% of the patients. 71.8% also had a prescription for digitalis, 86.9% for diuretics, 27.6% for spironolactone, 12% for beta-blockers, 37.2% for acetylsalicylic acid, 6.5% for calcium channel antagonists, and 12.5% for anticoagulants. In regard to vasodilators, 71% of the patients were using captopril (85.2mg/day), 20% enalapril (21.4mg/day), 3% hydralazine and nitrates. In 71.8% of the cases, the dosages prescribed were in accordance with those recommended in the large studies. CONCLUSION: Most patients were prescribed the same doses as those recommended in the large studies. Brazilian patients tolerate well the doses recommended in the studies, and that not using these doses may be a consequence of the physician's fear of prescribing them and not of the patient's intolerance.

Production of whey protein-based aggregates under ohmic heating

Formation of whey protein isolate protein aggregates under the influence of moderate electric fields upon ohmic heating (OH) has been monitored through evaluation of molecular protein unfolding, loss of its solubility, and aggregation. To shed more light on the microstructure of the protein aggregates produced by OH, samples were assayed by transmission electron microscopy (TEM). Results show that during early steps of an OH thermal treatment, aggregation of whey proteins can be reduced with a concomitant reduction of the heating chargeby reducing the come-up time (CUT) needed to reach a target temperatureand increase of the electric field applied (from 6 to 12 V cm1). Exposure of reactive free thiol groups involved in molecular unfolding of -lactoglobulin (-lg) can be reduced from 10 to 20 %, when a CUT of 10 s is combined with an electric field of 12 V cm1. Kinetic and multivariate analysis evidenced that the presence of an electric field during heating contributes to a change in the amplitude of aggregation, as well as in the shape of the produced aggregates. TEM discloses the appearance of small fibrillar aggregates upon the influence of OH, which have recognized potential in the functionalization of food protein networks. This study demonstrated that OH technology can be used to tailor denaturation and aggregation behavior of whey proteins due to the presence of a constant electric field together with the ability to provide a very fast heating, thus overcoming heat transfer limitations that naturally occur during conventional thermal treatments.

Compositional analysis of biofilms formed by Staphylococcus aureus isolated from food sources

The Supplementary Material for this article can be found online at: http://journal.frontiersin.org/article/10.3389/fmicb. 2016.00390