Respiration and ingestion rates of calanoid copepod in the northern Benguela Current System measured ex situ during the RSS Discovery D356 cruise in 2010

Respiration rates of 16 calanoid copepod species from the northern Benguela upwelling system were measured on board RRS Discovery in September/October 2010 to determine their energy requirements and assess their significance in the carbon cycle. Copepod species were sampled by different net types. Immediately after the hauls, samples were sorted to species and stages (16 species; females, males and C5 copepodids) according to Bradford-Grieve et al. (1999). Specimens were kept in temperature-controlled refrigerators for at least 12 h before they were used in experiments. Respiration rates of different copepod species were measured onboard by optode respirometry (for details see Köster et al., 2008) with a 10-channel optode respirometer (PreSens Precision Sensing Oxy-10 Mini, Regensburg, Germany) under simulated in situ conditions in temperature-controlled refrigerators. Experiments were run in gas-tight glass bottles (12-13 ml). For each set of experiments, two controls without animals were measured under exactly the same conditions to compensate for potential bias. The number of animals per bottle depended on the copepods size, stage and metabolic activity. Animals were not fed during the experiments but they showed natural species-specific movements. Immediately after the experiments, all specimens were deep-frozen at - 80 °C for later dry mass determination (after lyophilisation for 48 h) in the home lab. The carbon content (% of dry mass) of each species was measured by mass-spectrometry in association with stable isotope analysis and body dry mass was converted to units of carbon. For species without available carbon data, the mean value of all copepod species (44% dry mass) was applied. For the estimation of carbon requirements of copepod species, individual oxygen consumption rates were converted to carbon units, assuming that the expiration of 1 ml oxygen mobilises 0.44 mg of organic carbon by using a respiratory quotient (RQ) of 0.82 for a mixed diet consisting of proteins (RQ = 0.8-1.0), lipids (RQ = 0.7) and carbohydrates (RQ = 1.0) (Auel and Werner, 2003). The carbon ingestion rates were calculated using the energy budget and the potential maximum ingestion rate approach. To allow for physiological comparisons of respiration rates of deep- and shallow-living copepod species without the effects of ambient temperature and different individual body mass, individual respiration rates were temperature- (15°C, Q10=2) and size-adjusted. The scaling coefficient of 0.76 (R2=0.556) is used for the standardisation of body dry mass to 0.3 mg (mean dry mass of all analysed copepods), applying the allometric equation R= (R15°C/M0.76)×0.30.76, where R is respiration and M is individual dry mass in mg.

Sedimentary facies, clay mineralogy and geochemistry of the Paleogene sediments of ODP Site 105-647

Claystones immediately overlying the early Eocene age ocean-floor basalt, cored at Ocean Drilling Program (ODP) Site 647, underwent hydrothermal and thermal alterations originating from the basalt, which resulted in changes in both the mineralogical and chemical composition of the sediments. Chlorites and higher magnesium and iron concentrations were found in the lowermost sediment sequence. Upcore, changes in the bulk chemical composition of the sediments become smaller, when compensated for variations in the carbonate content originating from biogenic and authigenic components. Chlorite disappears upcore, but still only part of the swelling clay minerals have survived the thermal influence. Thirty meters above the basalt, the clay mineralogy and chemical composition become uniform throughout the Paleogene section. Iron-rich smectites (i.e., nontronitic types), totally dominate the clay mineral assemblage. Biogenic components, responsible for the dominant part of the calcite and cristobalite contents, vary in amount in the upper part, and so do the authigenic carbonate and sulfide contents. Detrital components, such as kaolinite, illite, quartz, and feldspars, make up a very small proportion of the sediment record. The nontronitic smectites are believed to be authigenic, formed by a supply of iron from the continuous formation of ocean-floor basalt in the ridge area that reacted with the detrital and biogenic silicates and alumina silicates.

Geochemistry of dark-light rhythm sediments of the Japan Sea

Ocean Drilling Program Legs 127 and 128 in the Japan Sea have revealed the existence of numerous dark-light rhythms of remarkable consistency in sediments of late Miocene, latest Pliocene, and especially Pleistocene age. Light-colored units within these rhythms are massive or bioturbated, consist of diatomaceous clays, silty clays, or nannofossil-rich clays, and are generally poor in organic matter. Dark-colored units are homogeneous, laminated, or thinly bedded and include substantial amounts of biogenic material such as well-preserved diatoms, planktonic foraminifers, calcareous nannofossils, and organic matter (maximum 7.4 wt%). The dark-light rhythms show a similar geometrical pattern on three different scales: First-order rhythms consist of a cluster dominated by dark-colored units followed by a cluster dominated by light-colored units (3-5 m). Spectral analysis of a gray-value time series suggests that the frequencies of the first-order rhythms in sediments of latest Pliocene and Pleistocene age correlate to the obliquity and the eccentricity cycles. The second-order dark-light rhythms include a light and a dark-colored unit (10-160 cm). They were formed in time spans of several hundred to several ten thousand years, with variance centering around 10,500 yr. This frequency may correspond to half the precessional cycle. Third-order rhythms appear as laminated or thinly bedded dark-light couplets (2-15 mm) within the dark-colored units of the second-order rhythms and may represent annual frequencies. In interpreting the rhythms, we have to take into account that (1) the occurrence of the first- and second-order rhythms is not necessarily restricted to glacial or interglacial periods as is shown by preliminary stable-isotope analysis and comparison with the published d18O record; (2) they appear to be Milankovitch-controlled; and (3) a significant number of the rhythms are sharply bounded. The origin of the dark-light rhythms is probably related to variations in monsoonal activity in the Japan Sea, which show annual frequencies, but also operates in phase with the orbital cycles.

Uranium contents and isotope ratios of uranium and strontium in sediments, leachates and pore fluids from ODP Hole 162-984A

Bulk dissolution rates for sediment from ODP Site 984A in the North Atlantic are determined using the 234U/238U activity ratios of pore water, bulk sediment, and leachates. Site 984A is one of only several sites where closely spaced pore water samples were obtained from the upper 60 meters of the core; the sedimentation rate is high (11-15 cm/ka), hence the sediments in the upper 60 meters are less than 500 ka old. The sediment is clayey silt and composed mostly of detritus derived from Iceland with a significant component of biogenic carbonate (up to 30%). The pore water 234U/238U activity ratios are higher than seawater values, in the range of 1.2 to 1.6, while the bulk sediment 234U/238U activity ratios are close to 1.0. The 234U/238U of the pore water reflects a balance between the mineral dissolution rate and the supply rate of excess 234U to the pore fluid by a-recoil injection of 234Th. The fraction of 238U decays that result in a-recoil injection of 234U to pore fluid is estimated to be 0.10 to 0.20 based on the 234U/238U of insoluble residue fractions. The calculated bulk dissolution rates, in units of g/g/yr are in the range of 0.0000004 to 0.000002 1/yr. There is significant down-hole variability in pore water 234U/238U activity ratios (and hence dissolution rates) on a scale of ca. 10 m. The inferred bulk dissolution rate constants are 100 to 1000 times slower than laboratory-determined rates, 100 times faster than rates inferred for older sediments based on Sr isotopes, and similar to weathering rates determined for terrestrial soils of similar age. The results of this study suggest that U isotopes can be used to measure in situ dissolution rates in fine-grained clastic materials. The rate estimates for sediments from ODP Site 984 confirm the strong dependence of reactivity on the age of the solid material: the bulk dissolution rate (R_d) of soils and deep-sea sediments can be approximately described by the expression R_d ~ 0.1 1/age for ages spanning 1000 to 500,000,000 yr. The age of the material, which encompasses the grain size, surface area, and other chemical factors that contribute to the rate of dissolution, appears to be a much stronger determinant of dissolution rate than any single physical or chemical property of the system.

137Cs and 90Sr depositions, and 137Cs/90Sr ratios of samples from the Kraton-3 underground nuclear explosion site, Russia

Strontium-90 activity concentrations in surface soils and areal deposition densities have been studied at a site contaminated by an accidental release to atmosphere from the underground nuclear explosion 'Kraton-3' conducted near the Polar Circle (65.9°N, 112.3°E) within the territory of the former USSR in 1978. In 2001-2002, the ground surface contamination at 14 plots studied ranged from 20 to 15000 kBq/m**2, which significantly exceeds the value of 0.44 kBq/m**2 deduced for three background plots. The zone with substantial radiostrontium contamination extends, at least, 2.5 km in a north-easterly direction from the borehole. The average 137Cs/90Sr ratio in the ground contamination originated from the 'Kraton-3' fallout was estimated to be 0.55, which is significantly different from the ratio of 2.05 evaluated for background plots contaminated mostly from global fallout. Although vertical migration of 90Sr in all undisturbed soil profiles studied is more rapid than that for 137Cs, the depth of percolation of both radionuclides into the ground is mostly limited to the top 10-20 cm, which may be explained, primarily, by permafrost conditions. The horizontal migration rate of radiostrontium in the aqueous phase exceeds the radiocaesium migration rate by many times. This phenomenon seems to be a reason for the significant enrichment of the soil surface layers by radiostrontium at some sites, with variations occurring in accordance with small-scale irregularities of landscape.

Mobilities, Entanglements, Transformations. Outline of a Research Project on Pottery Practices in Neolithic Wetland Sites of the Swiss Plateau

A large number of later Neolithic sites (3900–3500BC) in Switzerland, Southern Germany and Eastern France offer outstandingly well preserved archaeological materials from cultural layers. Due to the wide use of dendrochronology, settlement remains and artefact assemblages can now be placed into a precise and fixed chronological framework, thus presenting a unique case within prehistoric archaeology. In earlier research, chronological and regional units were constructed on the basis of pottery. These spacial and temporal units of typical pottery sets were understood as Neolithic cultures, as culturally more or less homogenous entities connected with (ethnic) identities. Today, with a larger data corpus of excavated settlements at hand, we can begin to understand that this period of the past was in fact characterised by a multitude of cultural entanglements and transformations. This is indicated by the occurrence of local and non-local pottery styles in one and the same settlement: for example typically local Cortaillod pottery is found together with NMB-styled pottery in settlements at Lake Neuchâtel or Michelsberg pottery is regularly occurring in settlements at Lake Constance where Pfyn pottery style is the typical local one. These and many more examples show that there must have been complex entanglements of social ties expanding between Eastern France, Southern Germany and the Swiss Plateau. Given these circumstances the former notions of Neolithic culture should be critically revised. Therefore, in late 2014, the Prehistoric Archaeology Department at the Archaeological Institute of University of Berne started a four-year research project funded by Swiss National Science Foundation in late 2014: ‘Mobilities, Entanglements and Transformations in Neolithic Societies of the Swiss Plateau (3900-3500 BC)’. It’s objective is to address the topic sketched above by adopting a mixed methods research (MMR)-design combining qualitative and quantitative approaches from archaeology and archaeometry. The approach is theoretically based on Pierre Bourdieu’s reflexive sociology and his concept of habitus but includes further concepts of practice theories. By shifting the focus to the movement of people, ideas and things – to pottery production practices in contexts of mobility – a deeper understanding of the transformative capacities of encounters can be achieved. This opens the path for new insights of Neolithic societies including social, cultural and economic dynamics that were underestimated in former research.

Performance indices for robotic manipulators: a review of the state of the art

The performance indices are important tools for motion planning and design of robot manipulators. In this paper we present a collection of some of the performance indices that have generated interest in the robotics community. These indices are four different types: kinetostatic performance indices, dynamic performance indices, indices of joint limits, and finally global performance indices. In addition, we review the strategies that have been proposed to solve the problems that occur when the units of the Jacobian matrix elements are not homogeneous. At the end of this paper, we propose a set of global performance indices that can be useful in the design of robot manipulators.

The unstoppable rise of photovoltaic solar energy: PV vs. PV

Photovoltaic (PV) solar energy has been growing during the last decade an explosive rate. Last year (2011) the solar cell production amounted to more than 37 GW. It is the energy technology most installed nowadays. The power generated by the 37 GW is similar to the one generated by about 7 nuclear units of 1 GW each. The solar industry is already a huge industry dominated by Asian countries led by China. It is not anymore a promise. It is just a reality.

A critical force constant of the structural phase transition in quartz

Long wavelength optical phonons of quartz were analyzed by a Born-Von Karman model not previously used. It was found that only one force constant associated with the turning of the Si-O bonds has a critical effect on the soft-mode frequency and the α-β transition in quartz. The square of the soft-mode frequency was found to depend linearly on this force constant which has the temperature dependence K(T)= -5.33+225.3x10-4(851-T)2/3 in units of 104 dyn/cm2.