Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Avaliação da percepção de professores do departamento de produção e alunos do quinto ano do curso de Engenheira de Produção mecânica da Unesp de Guaratinguetá de como está o curso em relação às competências e habilidades para engenheiros

In 2002, the Ministry of Education (MEC) published the Curriculum Guidelines for Engineering courses in the country. The Guidelines contain subjects like the profile of graduates, the course structure, curriculum, internships and skills and abilities, all geared to guide the training of engineers in Brazil. The objective of this study is to evaluate together with teachers of the Production Department of this University and students of the fifth year of Production Engineering is how student learning of Production Engineering for the development and importance of skills within the course and skills for engineers who are present in the Curriculum Guidelines for engineering courses developed by MEC

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid

Análise dos fatores de desempenho do ENADE: estudo parao curso de engenharia de produção mecânica

This work has the propose to discuss the National Examination Performance of students for the course in Production Engineering , from 2005 up to 2011, subsidies are shown how this came about assessment and how the course has been evaluated in recent years . Compares higher education from public and private universities in Brazil and is also discussed how important a good performance in the exam. Qualitative and quantitative surveys were conducted at different times that the work that enables a critical analysis of the examination , the institution and also the students themselves , so the list is the main motivators for the exam and also what should be done to obtaining good results in academic performance. Motivators for the exam has highlighted its importance is paramount and the consent of all involved from the beginning of the course to ensure that the examination is compulsory for all graduates of undergraduate manufacturing engineering in Brazil

Aplicação do ciclo rankine orgânico alimentado termicamente pela queima da casca do arroz e resíduos de madeira

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Flexão e análise dinâmico-mecânica de compósitos 5HS e NCF com resina epóxi monocomponente produzidos por RTM

In order to study resin distribution and homogeneity of composite laminates manufactured by RTM, it was used CYCOM 890 monolithic toughened epoxy as a matrix with two different configurations of intermediated modulus (IM) carbon fibers: Satin Weave (5HS) and non crimp fabric (NCF). The injection parameters were defined based on Thermo Gravimetric Analysis (TG), Differential Scanning Calorimetry (DSC) and rheological analysis. After processing the material, the resin/fiber impregnation was studied using ultrasonic test, Thermo Gravimetric Analysis, Differential Scanning Calorimetry, Dynamic Mechanical Analysis (DMA) and flexural tests. Therefore, it was able to observe an internal residual stress during the cooling process in both laminates, higher in the composite using NCF fabric due to the lack of symmetry, although a good proportion of fiber/matrix has been verified by the lower values of flexural modulus deviation. The DMA enabled the visualization of glass transition and its association with the inter and intra molecular interaction and movement, in which the NCF composite presented better permeability due to the lowest temperature of glass transition, when compared to the Satin Weave composite

Estudo dos fatores de virulência e resistência à oxacilina em Staphylococcus spp. isolados de aspirado traqueal de pacientes em ventilação mecânica internados em UTI

Patients that are mechanically ventilated in ICUs are constantly exposed to different pathogens, which present multiantibiotic resistance. Among these microorganisms, is MRSA (Meticillin-Resistant Staphylococcus aureus) considered to be a therapeutic challenge due to its resistance to β-lactam antibiotics. Therefore, this study proposed to identify species of Staphylococcus spp. isolated from mechanically ventilated patients in ICU, the gene mecA detection and the genes of the enterotoxins A (sea), B (seb), C (sec-1) and D (sed) in samples of S. aureus, as well as the phenotypic resistance determination to oxacillin using the disc-diffusion method with discs of oxacillin and cefoxitin. The samples collection occurred during in a period of 19 months, obtaining samples from 232 patients. A percentage of 39% (70) of Gram-positive cocci were found; which 82,8% (58) were identified as Staphylococcus spp,. among these, 75,8% (44) corresponded to S. aureus species and 47,7% were identified as MRSA. It was found resistance to both drugs in 31,8% of the S. aureus samples, 16 (36,3%) had the gene sea and 11 (25%) had the sec-1 gene. Among the coagulase-negative staphylococci obtained, the species most found was S. epidermidis, corresponding to 43% (6). The results revealed that one of the most important etiologic agents of VAP amid the Gram-positive cocci is the species S. aureus, with special attention to MRSA. The presence of enterotoxins genes in S. aureus did not showed determinant role in VAP, but the presence of these superantigens can contribute worsening the patient’s prognosis, since they are associated with intense inflammatory response

Sistemas de filtragem aplicados em processos fabris automotivos

The present work resulted from a study about coolant filtration systems in industries with metalworking process in large scale. The filtration and element filter world markets move billions of Reais per year and have a promissory future considering that with the global requirements of sustainable economic development, many companies invest in new filtering technology. Either known as coolant or cutting fluid, it is used to lubricate e cool parts during machining and is necessary due to the high volume demanded in the several machining operations and to the high cost of the product. Therefore, there is the need for recycling the product after its use. The work shows the technology and fundamentals of filtration as well as different filtering elements, filtration systems and scale contamination used in the industry. Also, there is a differentiation between filtration of the surface type (cake) and depth filtration and shows the basic theory of filtration by mathematic models in different operational conditions. Ultimately, project criteria for a coolant filtration system selection is shown followed by technical-operational details of a real vacuum filtration system and a case study aiming the operational cost reduction of the system

Efeito do tratamento alcalino da fibra na resistência mecânica do compósito epóxi/capim-sapê

Due to growing concerns for reducing environmental damage caused by the use of non-renewable raw materials, there is a growing demand for research related to aggregate technology with environmental preservation. Thus, the use of non-renewable materials and less aggressive materials has been gaining attention. About composite materials, the exchange of synthetic fibers by natural fibers, especially vegetable fiber as reinforcement, has been increasing, due to its physical-chemical properties such as mechanical strength, nontoxic, low cost, low density, processing flexibility, non-abrasive to the process equipment, requiring simple surface treatments, etc. This objective was to process composites reinforced with long fibers of sapegrass in epoxy matrix and characterize the composites through mechanical tests. Three groups of composites were prepared according to the treatment received by the reinforcement: without treatment, alkali treatment at concentration of 5% w/v and alkali treatment at 10% w/v concentration. The materials were analyzed by tensile and flexural, and tests also optical microscopy and scanning electron microscopy (SEM). The results were statistically analyzed. As the main result, the alkali treatment of 5% in the sapegrass fibers increases the tensile and flexural strength, as a consequence of the improve adhesion between matrix and reinforcement

Decisão making or buying: uma aplicação em células de manufatura de uma indústria de produção mecânica

In order to maintain the competitiveness the companies seek for cost reduction and resource optimization. A product or service price is calculated considering direct and indirect costs involved in its fabrication, which means that if an intern indirect process is optimized, the final price of the product is also reduced and becomes more interesting to the final costumer. Considering this reasoning, the companies must evaluate each of their processes and optimize them. It is common to outsource intern products manufacturing as a cost reduction strategy, nevertheless when there are already resources and capability to produce the own goods, it becomes necessary to evaluate the economic gain that each strategy - make or buy - generates. This paper aims to evaluate the necessary support to take a decision regarding making or buying in a production cell of hoses based in the value of economic cost, system cost and decision process

Transformada de Fourier: teoria como base para aplicações em mecânica celeste

Pós-graduação em Matemática Universitária - IGCE

Sistema de avaliação e tratamento da coluna lombar com o uso de tração mecânica

Pós-graduação em Engenharia Mecânica - FEG

Identificação de patógenos da cavidade bucal no lavado broncoalveolar de pacientes sob ventilação mecânica

Pós-graduação em Odontologia Restauradora - ICT