Topographic optical profilometry of steep slope micro-optical transparent surfaces

Optical profilometers based on light reflection may fail at surfaces presenting steep slopes and highly curved features. Missed light, interference and diffraction at steps, peaks and valleys are some of the reasons. Consequently, blind areas or profile artifacts may be observed when using common reflection micro-optical profilometers (confocal, scanning interferometers, etc…). The Topographic Optical Profilometry by Absorption in Fluids (TOPAF) essentially avoids these limitations. In this technique an absorbing fluid fills the gap between a reference surface and the surface to profile. By comparing transmission images at two different spectral bands we obtain a reliable topographic map of the surface. In this contribution we develop a model to obtain the profile under micro-optical observation, where high numerical aperture (NA) objectives are mandatory. We present several analytical and experimental results, validating the technique’s capabilities for profiling steep slopes and highly curved micro-optical surfaces with nanometric height resolution.

Algorithmes de construction et correction d'arbres de gènes par la réconciliation

Les gènes, qui servent à encoder les fonctions biologiques des êtres vivants, forment l'unité moléculaire de base de l'hérédité. Afin d'expliquer la diversité des espèces que l'on peut observer aujourd'hui, il est essentiel de comprendre comment les gènes évoluent. Pour ce faire, on doit recréer le passé en inférant leur phylogénie, c'est-à-dire un arbre de gènes qui représente les liens de parenté des régions codantes des vivants. Les méthodes classiques d'inférence phylogénétique ont été élaborées principalement pour construire des arbres d'espèces et ne se basent que sur les séquences d'ADN. Les gènes sont toutefois riches en information, et on commence à peine à voir apparaître des méthodes de reconstruction qui utilisent leurs propriétés spécifiques. Notamment, l'histoire d'une famille de gènes en terme de duplications et de pertes, obtenue par la réconciliation d'un arbre de gènes avec un arbre d'espèces, peut nous permettre de détecter des faiblesses au sein d'un arbre et de l'améliorer. Dans cette thèse, la réconciliation est appliquée à la construction et la correction d'arbres de gènes sous trois angles différents: 1) Nous abordons la problématique de résoudre un arbre de gènes non-binaire. En particulier, nous présentons un algorithme en temps linéaire qui résout une polytomie en se basant sur la réconciliation. 2) Nous proposons une nouvelle approche de correction d'arbres de gènes par les relations d'orthologie et paralogie. Des algorithmes en temps polynomial sont présentés pour les problèmes suivants: corriger un arbre de gènes afin qu'il contienne un ensemble d'orthologues donné, et valider un ensemble de relations partielles d'orthologie et paralogie. 3) Nous montrons comment la réconciliation peut servir à "combiner'' plusieurs arbres de gènes. Plus précisément, nous étudions le problème de choisir un superarbre de gènes selon son coût de réconciliation.

Method of numerical correction of errors occasioned by delay of records during the monitoring of environmental variables of interest for animal production

As condições de ambiente térmico e aéreo, no interior de instalações para animais, alteram-se durante o dia, devido à influência do ambiente externo. Para que análises estatísticas e geoestatísticas sejam representativas, uma grande quantidade de pontos distribuídos espacialmente na área da instalação deve ser monitorada. Este trabalho propõe que a variação no tempo das variáveis ambientais de interesse para a produção animal, monitoradas no interior de instalações para animais, pode ser modelada com precisão a partir de registros discretos no tempo. O objetivo deste trabalho foi desenvolver um método numérico para corrigir as variações temporais dessas variáveis ambientais, transformando os dados para que tais observações independam do tempo gasto durante a aferição. O método proposto aproximou os valores registrados com retardos de tempo aos esperados no exato momento de interesse, caso os dados fossem medidos simultaneamente neste momento em todos os pontos distribuídos espacialmente. O modelo de correção numérica para variáveis ambientais foi validado para o parâmetro ambiental temperatura do ar, sendo que os valores corrigidos pelo método não diferiram pelo teste Tukey, a 5% de probabilidade dos valores reais registrados por meio de dataloggers.

Retrospective correction of involuntary microscopic head movement using highly accelerated fat image navigators (3D FatNavs) at 7T.

PURPOSE: The goal of the present study was to use a three-dimensional (3D) gradient echo volume in combination with a fat-selective excitation as a 3D motion navigator (3D FatNav) for retrospective correction of microscopic head motion during high-resolution 3D structural scans of extended duration. The fat excitation leads to a 3D image that is itself sparse, allowing high parallel imaging acceleration factors - with the additional advantage of a minimal disturbance of the water signal used for the host sequence. METHODS: A 3D FatNav was inserted into two structural protocols: an inversion-prepared gradient echo at 0.33 × 0.33 × 1.00 mm resolution and a turbo spin echo at 600 μm isotropic resolution. RESULTS: Motion estimation was possible with high precision, allowing retrospective motion correction to yield clear improvements in image quality, especially in the conspicuity of very small blood vessels. CONCLUSION: The highly accelerated 3D FatNav allowed motion correction with noticeable improvements in image quality, even for head motion which was small compared with the voxel dimensions of the host sequence. Magn Reson Med 75:1030-1039, 2016. © 2015 Wiley Periodicals, Inc.

Correction of the misclassification of species in the Portuguese collection of Cucurbita pepo L. using DNA markers

In this study, the genetic variability among 130 accessions of the Portuguese germplasm collection of Cucurbita pepo L. maintained at the Banco Portugues de Germoplasma Vegetal was assessed using AFLP (amplified fragment length polymorphism) and RAPD (random amplified polymorphic DNA) techniques for the identification of a genetically diverse core group of accessions for field phenotypic analysis. The surprisingly completely different molecular patterns exhibited by multiple accessions was later confirmed in the distribution of the putative C. pepo plants into two clusters drastically separated at a very low level of genetic similarity (DICE coefficient = 0.37). Additional analyses with RAPD and ISSR (inter single sequence repeat) markers and the introduction of standard genotypes of C. maxima L. and C. moschata L. into the analyses allowed the identification of multiple accessions of the last species wrongly included in the C. pepo collection. This study is a good example of the usefulness of DNA markers in the establishment and management of plant germplasm collections.

Correction of the misclassification of species in the Portuguese collection of Cucurbita pepo L. using DNA markers

In this study, the genetic variability among 130 accessions of the Portuguese germplasm collection of Cucurbita pepo L. maintained at the Banco Portugues de Germoplasma Vegetal was assessed using AFLP (amplified fragment length polymorphism) and RAPD (random amplified polymorphic DNA) techniques for the identification of a genetically diverse core group of accessions for field phenotypic analysis. The surprisingly completely different molecular patterns exhibited by multiple accessions was later confirmed in the distribution of the putative C. pepo plants into two clusters drastically separated at a very low level of genetic similarity (DICE coefficient = 0.37). Additional analyses with RAPD and ISSR (inter single sequence repeat) markers and the introduction of standard genotypes of C. maxima L. and C. moschata L. into the analyses allowed the identification of multiple accessions of the last species wrongly included in the C. pepo collection. This study is a good example of the usefulness of DNA markers in the establishment and management of plant germplasm collections.

Algorithme non intrusif de localisation et de correction de distorsions dans les signaux sonores compressés à bas débits

Des sites de visionnement de contenu audio-vidéo en temps-réel comme YouTube sont devenus très populaires. Le téléchargement des fichiers audio/vidéo consomme une quantité importante de bande passante des réseaux Internet. L’utilisation de codecs à bas débit permet de compresser la taille des fichiers transmis afin de consommer moins de bande passante. La conséquence est une diminution de la qualité de ce qui est transmis. Une diminution de qualité mène à l’apparition de défauts perceptibles dans les fichiers. Ces défauts sont appelés des artifices de compression. L’utilisation d’un algorithme de post-traitement sur les fichiers sonores pourrait augmenter la qualité perçue de la musique transmise en corrigeant certains artifices à la réception, sans toutefois consommer davantage de bande passante. Pour rehausser la qualité subjective des fichiers sonores, il est d’abord nécessaire de déterminer quelles caractéristiques dégradent la qualité perceptuelle. Le présent projet a donc pour objectif le développement d’un algorithme capable de localiser et de corriger de façon non intrusive, un artifice provoqué par des discontinuités et des incohérences au niveau des harmoniques qui dégrade la qualité objective dans les signaux sonores compressés à bas débits (8 – 12 kilobits par seconde).

Correction des données satellitaires de fluorescence de la chlorophylle-a induite par le soleil pour les effets de bidirectionnalité

Les mesures satellitaires de réflectance de télédétection (Rrs) associée à la fluorescence de la chlorophylle-a induite par le soleil (FCIS), notées Rrs,f , sont largement utilisées dans le domaine de l’océanographie converties sous la forme de rendement quantique de la fluorescence (QYF). Le QYF permet de déterminer l’impact de l’environnement sur la croissance du phytoplancton. Tout comme les autres mesures qui reposent sur la luminance montante, le QYF, et donc la Rrs,f , sont influencés par les effets de bidirectionnalité. Ainsi, sachant que la variabilité naturelle du QYF est faible, les biais engendrés par une normalisation inadéquate de la Rrs,f peuvent avoir des impacts importants sur l’interprétation des mesures de QYF à l’échelle planétaire. La méthode actuelle utilisée pour corriger la dépendance angulaire du signal observé dans la bande de fluorescence par le spectroradiomètre imageur à résolution moyenne (MODIS), embarqué à bord du satellite Aqua, repose sur l’application d’une table de correspondance (LUT) développée par Morel et al. (2002). Toutefois, l’approche de Morel et al. (2002) ne tient pas compte du caractère isotrope de la FCIS ce qui induit des biais systématiques sur les mesures de Rrs,f selon la latitude, par exemple. Dans ce mémoire, une nouvelle méthode de calcul de la LUT ayant pour but de réduire ces biais est introduite. Tout d’abord, celle-ci intègre une mise à jour des propriétés optiques inhérentes (IOPs) dans le modèle de transfert radiatif sur la base de publications plus récentes. Ensuite, la gamme spectrale de son application est élargie à la bande de fluorescence contrairement à la méthode actuelle qui se limite à la longueur d’onde de 660 nm. Finalement, la LUT révisée tient compte des trois composantes principales de la réflectance de télédétection que sont (1) la rétrodiffusion élastique de la lumière par les molécules d’eau et par les particules en suspension, (2) la diffusion Raman (inélastique) par les molécules d’eau et (3) la FCIS. Les résultats de Rrs,f normalisées avec la nouvelle méthode présentent une différence de dispersion moyenne par rapport à celle obtenue par l’application de la méthode de Morel et al. (2002) de l’ordre de -15 %. Des différences significatives, de l’ordre de -22 %, sont observées à de grands angles d’observation et d’éclairement (> 55 %).

Evaluation of frozen ground conditions along a coastal topographic gradient at Byers Peninsula (Livingston Island, Antarctica) by geophysical and geoecological methods

Geophysical surveying and geoelectricalmethods are effective to study permafrost distribution and conditions in polar environments. Geoelectrical methods are particularly suited to study the spatial distribution of permafrost because of its high electrical resistivity in comparison with that of soil or rock above 0 °C. In the South Shetland Islands permafrost is considered to be discontinuous up to elevations of 20–40ma.s.l., changing to continuous at higher altitudes. There are no specific data about the distribution of permafrost in Byers Peninsula, in Livingston Island, which is the largest ice-free area in the South Shetland Islands. With the purpose of better understanding the occurrence of permanent frozen conditions in this area, a geophysical survey using an electrical resistivity tomography (ERT)methodologywas conducted during the January 2015 field season, combined with geomorphological and ecological studies. Three overlapping electrical resistivity tomographies of 78meach were done along the same profile which ran from the coast to the highest raised beaches. The three electrical resistivity tomographies are combined in an electrical resistivitymodel which represents the distribution of the electrical resistivity of the ground to depths of about 13malong 158m. Several patches of high electrical resistivity were found, and interpreted as patches of sporadic permafrost. The lower limits of sporadic to discontinuous permafrost in the area are confirmed by the presence of permafrost-related landforms nearby. There is a close correspondence between moss patches and permafrost patches along the geoelectrical transect.

Improving Bangla ocr output through correction algorithms

Bangla OCR (Optical Character Recognition) is a long deserving software for Bengali community all over the world. Numerous e efforts suggest that due to the inherent complex nature of Bangla alphabet and its word formation process development of high fidelity OCR producing a reasonably acceptable output still remains a challenge. One possible way of improvement is by using post processing of OCR’s output; algorithms such as Edit Distance and the use of n-grams statistical information have been used to rectify misspelled words in language processing. This work presents the first known approach to use these algorithms to replace misrecognized words produced by Bangla OCR. The assessment is made on a set of fifty documents written in Bangla script and uses a dictionary of 541,167 words. The proposed correction model can correct several words lowering the recognition error rate by 2.87% and 3.18% for the character based n- gram and edit distance algorithms respectively. The developed system suggests a list of 5 (five) alternatives for a misspelled word. It is found that in 33.82% cases, the correct word is the topmost suggestion of 5 words list for n-gram algorithm while using Edit distance algorithm the first word in the suggestion properly matches 36.31% of the cases. This work will ignite rooms of thoughts for possible improvements in character recognition endeavour.

Gradual correction of phosphorus availability in the no-tillage system.

2016

A second order control-volume finite-element least-squares strategy for simulating diffusion in strongly anisotropic media

An unstructured mesh �nite volume discretisation method for simulating di�usion in anisotropic media in two-dimensional space is discussed. This technique is considered as an extension of the fully implicit hybrid control-volume �nite-element method and it retains the local continuity of the ux at the control volume faces. A least squares function recon- struction technique together with a new ux decomposition strategy is used to obtain an accurate ux approximation at the control volume face, ensuring that the overall accuracy of the spatial discretisation maintains second order. This paper highlights that the new technique coincides with the traditional shape function technique when the correction term is neglected and that it signi�cantly increases the accuracy of the previous linear scheme on coarse meshes when applied to media that exhibit very strong to extreme anisotropy ratios. It is concluded that the method can be used on both regular and irregular meshes, and appears independent of the mesh quality.

The Coming of Post-reflexive Society: Commodification and Language in Digital Capitalism

Language is a unique aspect of human communication because it can be used to discuss itself in its own terms. For this reason, human societies potentially have superior capacities of co-ordination, reflexive self-correction, and innovation than other animal, physical or cybernetic systems. However, this analysis also reveals that language is interconnected with the economically and technologically mediated social sphere and hence is vulnerable to abstraction, objectification, reification, and therefore ideology – all of which are antithetical to its reflexive function, whilst paradoxically being a fundamental part of it. In particular, in capitalism, language is increasingly commodified within the social domains created and affected by ubiquitous communication technologies. The advent of the so-called ‘knowledge economy’ implicates exchangeable forms of thought (language) as the fundamental commodities of this emerging system. The historical point at which a ‘knowledge economy’ emerges, then, is the critical point at which thought itself becomes a commodified ‘thing’, and language becomes its “objective” means of exchange. However, the processes by which such commodification and objectification occurs obscures the unique social relations within which these language commodities are produced. The latest economic phase of capitalism – the knowledge economy – and the obfuscating trajectory which accompanies it, we argue, is destroying the reflexive capacity of language particularly through the process of commodification. This can be seen in that the language practices that have emerged in conjunction with digital technologies are increasingly non-reflexive and therefore less capable of self-critical, conscious change.

A new measure to quantify chest wall deformity in scoliosis patients : does rib hump measurement correlate with anterior chest wall deformity post surgery?

The primary aims of scoliosis surgery are to halt the progression of the deformity, and to reduce its severity (cosmesis). Currently, deformity correction is measured in terms of posterior parameters (Cobb angles and rib hump), even though the cosmetic concern for most patients is anterior chest wall deformity. In this study, we propose a new measure for assessing anterior chest wall deformity and examine the correlation between rib hump and the new measure. 22 sets of CT scans were retrieved from the QUT/Mater Paediatric Spinal Research Database. The Image J software (NIH) was used to manipulate formatted CT scans into 3-dimensional anterior chest wall reconstructions. A ‘chest wall angle’ was then measured in relation to the first sacral vertebral body. The chest wall angle was found to be a reliable tool in the analysis of chest wall deformity. No correlation was found between the new measure and rib hump angle. Since rib hump has been shown to correlate with vertebral rotation on CT, this suggests that there maybe no correlation between anterior and posterior deformity measures. While most surgical procedures will adequately address the coronal imbalance & posterior rib hump elements of scoliosis, they do not reliably alter the anterior chest wall shape. This implies that anterior chest wall deformity is to a large degree an intrinsic deformity, not directly related to vertebral rotation.