Bond Strength of Fiber Posts to Weakened Roots After Resin Restoration With Different Light-Curing Times

Introduction: This study evaluated the bond strength of translucent fiber posts to experimentally weakened radicular dentin restored with composite resin and polymerized with different light-exposure time. Methods: Roots of 60 maxillary incisors were used. Twenty-four hours after obturation, the filling materials of root canals were removed to a depth of 12 mm, and 4 groups were randomly formed. In 3 groups, root dentin was flared to produce a space between fiber post and canal walls. In the control group, the roots were not experimentally weakened. The flared roots were bulk restored with composite resin, which was light-activated through the translucent post for 40, 80, or 120 seconds. Posts were cemented, and after 24 hours, all roots were sectioned transversely in the coronal, middle, and apical regions, producing 1-mm-thick slices. Push-out test was performed, and failure modes were observed. Results The quantitative analysis showed significant statistical difference only among groups (P <.001). Comparing the weakened/restored groups, composite light-exposure time did not influence the results. Overall, adhesive failures occurred more frequently than other types of failures. Cohesive failures occurred only in the weakened/restored roots. Conclusions Intracanal root restoration with composite resin and translucent fiber posts provided similar or higher bond strength to dentin than the control group, regardless of the light-exposure time used for polymerization. (J Endod 2009;35:1034-1039)

Bond Strength of Epiphany Sealer Prepared with Resinous Solvent

This study evaluated in vitro the bond strength of Epiphany sealer prepared with resinous solvent of Epiphany system (Thinning resin) by using a push-out test. Forty maxillary canines were sectioned transversally below the cementoenamel junction to provide 4-mm-thick dentin disks that were centered in aluminum rings and embedded in acrylic resin. Root canals were prepared with tapered diamond bur. Intraradicular dentin was treated with 1% NaOCl for 30 minutes, 17% ethylenediaminetetraacetic acid for 5 minutes, and flushed with distilled water for 1 minute. The specimens were randomly distributed into 4 groups (n = 10) according to the filling material: GI, Epiphany without photoactivation; GII, Epiphany prepared with solvent without photoactivation; Gill, Epiphany followed by photoactivation; and GIV, Epiphany prepared with solvent followed by photoactivation. After the setting time, the specimens were submitted to the push-out test. The highest mean value (14.91 +/- 2.82 MPa) was obtained with Epiphany prepared with solvent followed by photoactivation (GIV), which was statistically different (P < .01) from the other groups. Groups I (8.15 +/- 2.47 MPa), II (9.46 +/- 2.38 MPa), and III (9.80 +/- 2.51 MPa) had inferior bond strength values and were statistically similar among themselves (P > .01). The resinous solvent of Epiphany system increased the bond strength of Epiphany sealer to dentin walls when followed by photoactivation. (J Endod 2009;35: 251-255)

Interfacial evaluation of experimentally weakened roots restored with adhesive materials and fibre posts: An SEM analysis

Objectives: To evaluate the bonding interface in experimentally weakened roots reinforced with adhesive restorative materials and quartz fibre posts, varying the light-exposure time of the composite resin used for root reinforcement. Methods: Twelve extracted human maxillary incisors teeth were used. The crowns were removed and the roots were endodontically treated. After post space preparation, the roots were assigned to four groups. The thickness of the root dentine was reduced and adhesively restored with composite resin light-activated through a translucent fibre post for either 40 s (group 1), 80 s (group 2) or 120 s (group 3). In the case of control (group 4), the roots were not weakened. One day after post cementation, the specimens were sectioned transversally in three slices and processed for scanning electron microscopic analysis to observe bonding interface formation, quality of the hybrid layer and density of resin tags using a four-step scale method. Results: Formation of a hybrid layer and resin tags were evident in all groups. There was no statistically (p > 0.05) significant difference between the regions analysed in each group (Friedman test) and between groups in each section depth (Kruskal-Wallis test). Furthermore, comparison of the flared/reinforced groups showed that the different time;; used for composite resin cure did not affect the results significantly (Kruskal-Wallis test, p = 0.2139). Conclusions: Different light-exposure times used for composite resin polymerisation during root canal reinforcement did not affect significantly the formation and quality of the dentine/adhesive/composite resin bonding interface. (C) 2008 Elsevier Ltd. All rights reserved.

Effects of light exposure time on composite resin hardness after root reinforcement using translucent fibre post

Objectives: The purpose of this in vitro study was to evaluate the Vickers hardness (VHN) of a Light Core (Bisco) composite resin after root reinforcement, according to the light exposure time, region of intracanal reinforcement and lateral distance from the light-transmitting fibre post. Methods: Forty-five 17-mm long roots were used. Twenty-four hours after obturation, the root canals were emptied to a depth of 12 mm and the root dentine was artificially flared to produce a 1 mm space between the fibre post and the canal walls. The roots were bulk restored with the composite resin, which was photoactivated through the post for 40 s (G1, control), 80 s (G2) or 120 s (G3). Twenty-four hours after post-cementation, the specimens were sectioned transversely into three slices at depths of 2, 6 and 10 mm, corresponding to the coronal, middle and apical regions of the reinforced root. Composite VHN was measured as the average of three indentations (100 g/15 s) in each region at lateral distances of 50, 200 and 350 mu m from the cement/post-interface. Results: Three-way analysis of variance (alpha = 0.05) indicated that the factors time, region and distance influenced the hardness and that the interaction time x region was statistically significant (p = 0.0193). Tukey`s test showed that the mean VHN values for G1 (76.37 +/- 8.58) and G2 (74.89 +/- 6.28) differed significantly from that for G3 (79.5 +/- 5.18). Conclusions: Composite resin hardness was significantly lower in deeper regions of root reinforcement and in lateral areas distant from the post. Overall, a light exposure time of 120 s provided higher composite hardness than the shorter times (40 and 80 s). (C) 2008 Elsevier Ltd. All rights reserved.

Variation in Alcohol Pharmacokinetics as a Risk Factor for Alcohol Dependence

Background: The significant association between alcohol dehydrogenase (ADH)-2 genotype and alcohol-dependence risk, demonstrated in both Asian and non-Asian populations, suggests a link between the metabolism of alcohol (ethanol) and individual differences in susceptibility to dependence. Methods: We tested this hypothesis by following up on subjects who took part in the Alcohol Challenge Twin Study conducted in 1979-1981 and comparing the blood and breath alcohol results in that study between subjects who subsequently did or did not meet diagnostic criteria for lifetime alcohol dependence in 1992-1993. Results: Subjects who met DSM-III-R criteria for lifetime alcohol dependence at follow-up had higher blood and breath alcohol values after alcohol challenge than never-dependent subjects. Multivariate analysis showed independent effects of susceptibility to alcohol dependence and smoking status on blood alcohol concentrations, whereas habitual alcohol intake at the time of the initial study had marginally significant effects. The risk of alcohol dependence was 2-fold higher in men and 3-fold higher in women with blood or breath alcohol concentrations in the highest quartile than in the lowest quartile. Conclusions: In view of this association and the known genetic influences on both alcohol pharmacokinetics and alcohol dependence, it is probable that part of the heritability of dependence is mediated by genes (other than the known ADH2 and ADH3 polymorphisms) affecting alcohol metabolism.

Low tacrolimus concentrations and increased risk of early acute rejection in adult renal transplantation

Background. A retrospective analysis was performed on adult renal transplant recipients to evaluate the relationship between tacrolimus trough concentrations and the development of rejection in the first month after transplant. Methods. A total of 349 concentrations from 29 patients, measured by enzyme-linked immunosorbent assay (ELISA), were recorded. Based on an increased serum creatinine, 12 patients were considered to have organ rejection. Rejection was confirmed by biopsy in five of these. The median trough concentration of tacrolimus over the first month of therapy, or until the time of first rejection was compared in rejecters vs non-rejecters. Results. Median trough concentrations of tacrolimus were found to be lower in biopsy-proven rejecters vs non-rejecters (P=0.03) and all rejecters vs nonrejecters (P = 0.04). The average median concentration (+/- SD) in the biopsy-proven rejecter group was 5.09 +/-1.16 ng/ml, compared to 9.20 +/-3.52 ng/ml in the non-rejecter group. After exclusion of an outlier, the average median concentration in all rejecters was 5.57 +/-1.47 ng/rnl, compared with 9.20 +/-3.52 ng/ml in non-rejecters. A rejection rate of 55% was found for patients with a median trough concentration between 0 and 10 ng/ml. This compared with no observed rejection in patients with a median concentration between 10 and 15 ng/ml. Conclusion. A significant relationship exists between organ rejection and median tacrolimus trough concentrations in the first month post-transplant, with patients displaying low concentrations more likely to reject. In order to minimize rejection in the first month after renal transplantation, trough concentrations greater than 10 ng/ml must be achieved.

Service guarantees: A strategic mechanism to minimise customers' perceived risk in service organisations

Service offerings are largely intangible in nature. Customers are thus unable to assess the purchase outcome prior to experience, rendering the risk of possible customer dissatisfaction very high. It is argued that the concept of service guarantees proposed by services management theory can be effectively utilised to reduce the perceived risk of dissatisfaction for the customer in service organisations. Additionally, it is suggested that service guarantees force management to undertake activities which elevate the superiority of the organisation in the eyes of the customer and, thus, the opportunity to transform one-time customers into loyal ones. The purpose of this paper is twofold: first, to illustrate how customers’ behavioural intentions can be influenced by the use of a service guarantee; and second, to outline a systematic process that can help service business managers to develop and implement an effective service guarantee. This research highlights the numerous benefits available to service organisations by utilising the service guarantee as a strategic tool. Some of the important management implications are also outlined.

Time of treatment influences the appearance of drug-resistant parasites in Plasmodium falciparum infections

A deterministic mathematical model which predicts the probability of developing a new drug-resistant parasite population within the human host is reported, The model incorporates the host's specific antibody response to PfEMP1, and also investigates the influence of chemotherapy on the probability of developing a viable drug-resistant parasite population within the host. Results indicate that early, treatment, and a high antibody threshold coupled with a long lag time between antibody stimulation and activity, are risk factors which increase the likelihood of developing a viable drug-resistant parasite population. High parasite mutation rates and fast PfEMP1 var gene switching are also identified as risk factors. The model output allows the relative importance of the various risk factors as well as the relationships between them to be established, thereby increasing the understanding of the conditions which favour the development of a new drug-resistant parasite population.

A risk-based system to penalize and reward line management for occupational safety and health performance

Penalizing line management for the occurrence of lost time injuries has in some cases had unintended negative consequences. These are discussed. An alternative system is suggested that penalizes line management for accidents where the combination of the probability of recurrence and the maximum reasonable consequences such a recurrence may have exceeds an agreed limit. A reward is given for prompt effective control of the risk to below the agreed risk limit. The reward is smaller than the penalty. High-risk accidents require independent investigation by a safety officer using analytical techniques. Two case examples are given to illustrate the system. Continuous safety improvement is driven by a planned reduction in the agreed risk limit over time and reward for proactive risk assessment and control.

Effect of varying levels of mental workload on startle eyeblink modulation

Previous research using punctuate reaction time and counting tasks has found that the startle eyeblink reflex is sensitive to attentional demands. The present experiment explored whether startle eyeblink is also modulated during a complex continuous task and is sensitive to different levels of mental workload. Participants (N=14) performed a visual horizontal tracking task either alone (single-task condition) or in combination with a visual gauge monitoring task (multiple-task condition) for three minutes. On some task trials, the startle eyeblink reflex was elicited by a noise burst. Results showed that startle eyeblink was attenuated during both tasks and that the attenuation was greater during the multiple-task condition than during the single-task condition. Subjective ratings, endogenous eyeblink rate, heart period, and heart period variability provided convergent validity of the workload manipulations. The findings suggest that the startle eyeblink is sensitive to the workload demands associated with a continuous visual task. The application of startle eyeblink modulation as a workload metric and the possibility that it may be diagnostic of workload demands in different stimulus modalities is discussed.

Finite difference time domain (FDTD) method for modeling the effect of switched gradients on the human body in MRI

Numerical modeling of the eddy currents induced in the human body by the pulsed field gradients in MRI presents a difficult computational problem. It requires an efficient and accurate computational method for high spatial resolution analyses with a relatively low input frequency. In this article, a new technique is described which allows the finite difference time domain (FDTD) method to be efficiently applied over a very large frequency range, including low frequencies. This is not the case in conventional FDTD-based methods. A method of implementing streamline gradients in FDTD is presented, as well as comparative analyses which show that the correct source injection in the FDTD simulation plays a crucial rule in obtaining accurate solutions. In particular, making use of the derivative of the input source waveform is shown to provide distinct benefits in accuracy over direct source injection. In the method, no alterations to the properties of either the source or the transmission media are required. The method is essentially frequency independent and the source injection method has been verified against examples with analytical solutions. Results are presented showing the spatial distribution of gradient-induced electric fields and eddy currents in a complete body model.

Risk factors for non-haemorrhagic stroke in patients with coronary heart disease and the effect of lipid-modifying therapy with pravastatin

Objective To determine the relative importance of recognised risk factors for non-haemorrhagic stroke, including serum cholesterol and the effect of cholesterol-lowering therapy, on the occurrence of non-haemorrhagic stroke in patients enrolled in the LIPID (Long-term Intervention with Pravastatin in Ischaemic Disease) study. Design The LIPID study was a placebo-controlled, double-blind trial of the efficacy on coronary heart disease mortality of pravastatin therapy over 6 years in 9014 patients with previous acute coronary syndromes and baseline total cholesterol of 4-7 mmol/l. Following identification of patients who had suffered non-haemorrhagic stroke, a pre-specified secondary end point, multivariate Cox regression was used to determine risk in the total population. Time-to-event analysis was used to determine the effect of pravastatin therapy on the rate of non-haemorrhagic stroke. Results There were 388 non-haemorrhagic strokes in 350 patients. Factors conferring risk of future non-haemorrhagic stroke were age, atrial fibrillation, prior stroke, diabetes, hypertension, systolic blood pressure, cigarette smoking, body mass index, male sex and creatinine clearance. Baseline lipids did not predict non-haemorrhagic stroke. Treatment with pravastatin reduced non-haemorrhagic stroke by 23% (P= 0.016) when considered alone, and 21% (P= 0.024) after adjustment for other risk factors. Conclusions The study confirmed the variety of risk factors for non-haemorrhagic stroke. From the risk predictors, a simple prognostic index was created for nonhaemorrhagic stroke to identify a group of patients at high risk. Treatment with pravastatin resulted in significant additional benefit after allowance for risk factors. (C) 2002 Lippincott Williams Wilkins.

Evolution of additive and nonadditive genetic variance in development time along a cline in Drosophila serrata

Latitudinal clines provide natural systems that may allow the effect of natural selection on the genetic variance to be determined. Ten clinal populations of Drosophila serrata collected from the eastern coast of Australia were used to examine clinal patterns in the trait mean and genetic variance of the life-history trait egg-to-adult development time. Development time significantly lengthened from tropical areas to temperate areas. The additive genetic variance for development time in each population was not associated with latitude but was associated with the population mean development time. Additive genetic variance tended to be larger in populations with more extreme development times and appeared to be consistent with allele frequency change. In contrast, the nonadditive genetic variance was not associated with the population mean but was associated with latitude. Levels of nonadditive genetic variance were greatest in the region of the cline where the gradient in the change in mean was greatest, consistent with Barton's (1999) conjecture that the generation of linkage disequilibrium may become an important component of the genetic variance in systems with a spatially varying optimum.

Genotype and environment effects on dynamics of harvest index during grain filling in sorghum

An approach based on a linear rate of increase in harvest index (141) with time after anthesis has been used as a simple means-to predict grain growth and yield in many crop simulation models. When applied to diverse situations, however, this approach has been found to introduce significant error in grain yield predictions. Accordingly, this study was undertaken to examine the stability of the HI approach for yield prediction in sorghum [Sorghum bicolor (L.) Moench]. Four field experiments were conducted under nonlimiting water. and N conditions. The experiments were sown at times that ensured a broad range in temperature and radiation conditions. Treatments consisted of two population densities and three genotypes varying in maturity. Frequent sequential harvests were used to monitor crop growth, yield, and the dynamics of 111. Experiments varied greatly in yield and final HI. There was also a tendency for lower HI with later maturity. Harvest index dynamics also varied among experiments and, to a lesser extent, among treatments within experiments. The variation was associated mostly with the linear rate of increase in HI and timing of cessation of that increase. The average rate of HI increase was 0.0198 d(-1), but this was reduced considerably (0.0147) in one experiment that matured in cool conditions. The variations found in IN dynamics could be largely explained by differences in assimilation during grain filling and remobilization of preanthesis assimilate. We concluded that this level of variation in HI dynamics limited the general applicability of the HI approach in yield prediction and suggested a potential alternative for testing.

Survival analysis: a tool in the study of post-harvest diseases in peaches

Survival analysis is applied when the time until the occurrence of an event is of interest. Such data are routinely collected in plant diseases, although applications of the method are uncommon. The objective of this study was to use two studies on post-harvest diseases of peaches, considering two harvests together and the existence of random effect shared by fruits of a same tree, in order to describe the main techniques in survival analysis. The nonparametric Kaplan-Meier method, the log-rank test and the semi-parametric Cox's proportional hazards model were used to estimate the effect of cultivars and the number of days after full bloom on the survival to the brown rot symptom and the instantaneous risk of expressing it in two consecutive harvests. The joint analysis with baseline effect, varying between harvests, and the confirmation of the tree effect as a grouping factor with random effect were appropriate to interpret the phenomenon (disease) evaluated and can be important tools to replace or complement the conventional analysis, respecting the nature of the variable and the phenomenon.