945 resultados para Sustainable environment
Resumo:
Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)
Resumo:
INTRODUCTION: Sandflies caught in Santa Juliana Farm in Sarandi, State of Paraná, Brazil, were assessed in terms of their fauna, seasonality, and frequency in the homes and in shelters of domestic animals around the homes, as well as in the nearby forest. METHODS: In Santa Juliana Farm, there are no records of cases of ACL, differing from other relatively clean and organized areas where surveys of sandflies have been conducted in Paraná. Samples were collected with Falcão light traps, fortnightly from 22:00 to 02:00 hours, from November 2007 to November 2008. RESULTS: A total of 4,506 sandflies were captured, representing 13 species, predominantly Nyssomyia whitmani (71.8%). More sandflies were collected in the forest (52.6%) than outside the forest (residences and pigsty) (47.4%). However, Ny. whitmani was collected in greater numbers outside (38.3%) than inside the forest (33.5%). Most sandflies were collected in the warmer months and during periods with regular rainfall. CONCLUSIONS: The results suggest that cleaning and organization around the houses could reduce sandfly population in peridomicile. Constructing shelters for animal at a distance of approximately 100m from domiciles is recommended to prevent the invasion of sandflies, as this farm has an area of preserved forest, with wild animals and sandflies present to maintain the enzootic cycle of Leishmania.
Resumo:
INTRODUCTION: This study aimed to isolate and identify Candida spp. from the environment, health practitioners, and patients with the presumptive diagnosis of candidiasis in the Pediatric Unit at the Universitary Hospital of the Jundiaí Medical College, to verify the production of enzymes regarded as virulence factors, and to determine how susceptible the isolated samples from patients with candidiasis are to antifungal agents. METHODS: Between March and November of 2008 a total of 283 samples were taken randomly from the environment and from the hands of health staff, and samples of all the suspected cases of Candida spp. hospital-acquired infection were collected and selected by the Infection Control Committee. The material was processed and the yeast genus Candida was isolated and identified by physiological, microscopic, and macroscopic attributes. RESULTS: The incidence of Candida spp. in the environment and employees was 19.2%. The most frequent species were C. parapsilosis and C. tropicalis among the workers, C. guilliermondii and C. tropicalis in the air, C. lusitanae on the contact surfaces, and C. tropicalis and C. guilliermondii in the climate control equipment. The college hospital had 320 admissions, of which 13 (4%) presented Candida spp. infections; three of them died, two being victims of a C. tropicalis infection and the remaining one of C. albicans. All the Candida spp. in the isolates evidenced sensitivity to amphotericin B, nystatin, and fluconazole. CONCLUSIONS: The increase in the rate of hospital-acquired infections caused by Candida spp. indicates the need to take larger measures regarding recurrent control of the environment.
Resumo:
In the latest years the wind energy sector experienced an exponential growth all over the world. What started as a deployment of onshore projects, soon moved to offshore and, more recently to the urban environment within the context of smart cities and renewable micro-generation. However, urban wind projects using micro turbines do not have enough profit margins to enable the setup of comprehensive and expensive measurement campaigns, a standard procedure for the deployment of large wind parks. To respond to the wind assessment needs of the future smart cities a new and simple methodology for urban wind resource assessment was developed. This methodology is based on the construction of a surface involving a built area in order to estimate the wind potential by treating it as very complex orography. This is a straightforward methodology that allows estimating the sustainable urban wind potential, being suitable to map the urban wind resource in large areas. The methodology was applied to a case study and the results enabled the wind potential assessment of a large urban area being consistent with experimental data obtained in the case study area, with maximum deviations of the order of 10% (mean wind speed) and 20% (power density).
Resumo:
This marketing plan project is a culmination of extensive strategies with the use of experiential marketing to address issues confronting the Kenyan tourism industry in order to have a sustainable tourism sector. Following the terrorist attack carried out by Islamist militants’ belonging to al-Shabaab terrorist organization on Nairobi’s Westgate shopping mall in September 2013, tourist forecast has gone down sharply with an average of 20% fall in tourists’ arrivals which is likely to have an impact on the tourism sector in Kenya. Even before the deadly attack on Westgate, the most lethal attack by Islamist terrorists in 15 years in Kenya, the government through the Kenya tourist board had announced that in 2013 tourist arrivals were down by 12%, at 495,978, according to an October 2013 report by Bloomberg. Tourism revenues were also down by 7.4%, over FY12/13 (July-June) to reach KES96.24bn, according to a September 2013 report on the local Capital FM website. Beyond 2013, much will depend on how quickly the Kenya tourist board can regain control of the situation. The Kenyan government believes that the Westgate mall attack was a 'one-off' incident, with a low probability of a similar event happening again over the short term period. Germany, United States, United Kingdom, Australia, Italy, France and Canada continue to be the key source market however; the Kenya tourist board can make continued growth stronger from new emerging markets in order to increase new arrivals into the country. The marketing plan outlines the objectives to be implemented and provides the implementation strategy, activity plans, monitoring and evaluation plans, financial requirements projections and proposes a new structure of experiential marketing. A number of regional forces are identified that will impact tourism into the country including global, social and economic forces, emerging trends in visitor motivations and behavior, emerging forces in experiential marketing. A major component of the strategy identifies target markets for Kenya to commensurate with the level of resources that will be available for marketing and promotion, in keeping with the forces and trends identified and the nature of the Kenya tourism environment. The agreed upon target market segments are: generic/mass travel, experiential travel, creative travel, adventure seeking travel, senior/extended/long stay travel, and business related travel. The strategy phases the development of the target markets over the years of the marketing strategies in order to yield the best opportunity for results. A core activity in developing a marketing strategy is determining the nature of experiences Kenya offers in tourism. The strategy’s experience development process will continue to develop within the context of the products identified which will be promoted regionally: culture/heritage, nature, community-based. Each county in the country has a significant number of attractions and experiences and the challenge of the country is to bring these together in a creative and innovative way in order to encourage tourists to visit more than one county in Kenya.
Resumo:
A potentially renewable and sustainable source of energy is the chemical energy associated with solvation of salts. Mixing of two aqueous streams with different saline concentrations is spontaneous and releases energy. The global theoretically obtainable power from salinity gradient energy due to World’s rivers discharge into the oceans has been estimated to be within the range of 1.4-2.6 TW. Reverse electrodialysis (RED) is one of the emerging, membrane-based, technologies for harvesting the salinity gradient energy. A common RED stack is composed by alternately-arranged cation- and anion-exchange membranes, stacked between two electrodes. The compartments between the membranes are alternately fed with concentrated (e.g., sea water) and dilute (e.g., river water) saline solutions. Migration of the respective counter-ions through the membranes leads to ionic current between the electrodes, where an appropriate redox pair converts the chemical salinity gradient energy into electrical energy. Given the importance of the need for new sources of energy for power generation, the present study aims at better understanding and solving current challenges, associated with the RED stack design, fluid dynamics, ionic mass transfer and long-term RED stack performance with natural saline solutions as feedwaters. Chronopotentiometry was used to determinate diffusion boundary layer (DBL) thickness from diffusion relaxation data and the flow entrance effects on mass transfer were found to avail a power generation increase in RED stacks. Increasing the linear flow velocity also leads to a decrease of DBL thickness but on the cost of a higher pressure drop. Pressure drop inside RED stacks was successfully simulated by the developed mathematical model, in which contribution of several pressure drops, that until now have not been considered, was included. The effect of each pressure drop on the RED stack performance was identified and rationalized and guidelines for planning and/or optimization of RED stacks were derived. The design of new profiled membranes, with a chevron corrugation structure, was proposed using computational fluid dynamics (CFD) modeling. The performance of the suggested corrugation geometry was compared with the already existing ones, as well as with the use of conductive and non-conductive spacers. According to the estimations, use of chevron structures grants the highest net power density values, at the best compromise between the mass transfer coefficient and the pressure drop values. Finally, long-term experiments with natural waters were performed, during which fouling was experienced. For the first time, 2D fluorescence spectroscopy was used to monitor RED stack performance, with a dedicated focus on following fouling on ion-exchange membrane surfaces. To extract relevant information from fluorescence spectra, parallel factor analysis (PARAFAC) was performed. Moreover, the information obtained was then used to predict net power density, stack electric resistance and pressure drop by multivariate statistical models based on projection to latent structures (PLS) modeling. The use in such models of 2D fluorescence data, containing hidden, but extractable by PARAFAC, information about fouling on membrane surfaces, considerably improved the models fitting to the experimental data.
Resumo:
Directed Research Internship
Analysis of metabolic flux distributions in relation to the extracellular environment in Avian cells
Resumo:
Continuous cell lines that proliferate in chemically defined and simple media have been highly regarded as suitable alternatives for vaccine production. One such cell line is the AG1.CR.pIX avian cell line developed by PROBIOGEN. This cell line can be cultivated in a fully scalable suspension culture and adapted to grow in chemically defined, calf serum free, medium [1]–[5]. The medium composition and cultivation strategy are important factors for reaching high virus titers. In this project, a series of computational methods was used to simulate the cell’s response to different environments. The study is based on the metabolic model of the central metabolism proposed in [1]. In a first step, Metabolic Flux Analysis (MFA) was used along with measured uptake and secretion fluxes to estimate intracellular flux values. The network and data were found to be consistent. In a second step, Flux Balance Analysis (FBA) was performed to access the cell’s biological objective. The objective that resulted in the best predicted results fit to the experimental data was the minimization of oxidative phosphorylation. Employing this objective, in the next step Flux Variability Analysis (FVA) was used to characterize the flux solution space. Furthermore, various scenarios, where a reaction deletion (elimination of the compound from the media) was simulated, were performed and the flux solution space for each scenario was calculated. Growth restrictions caused by essential and non-essential amino acids were accurately predicted. Fluxes related to the essential amino acids uptake and catabolism, the lipid synthesis and ATP production via TCA were found to be essential to exponential growth. Finally, the data gathered during the previous steps were analyzed using principal component analysis (PCA), in order to assess potential changes in the physiological state of the cell. Three metabolic states were found, which correspond to zero, partial and maximum biomass growth rate. Elimination of non-essential amino acids or pyruvate from the media showed no impact on the cell’s assumed normal metabolic state.
Resumo:
An organizations´ level of sustainability has so far been primarily been analyzed within the context of economic performance. This study changes that dependent variable to “resilience”, namely a company’s ability to recover from potential lethal shocks or disruptive events. The research questions aims to investigate whether sustainability and resilience are related. This study utilizes the financial crisis from 2007/08 as disruptive event, as it encompassed market phase-out but also survival by established firms. Two Swiss luxury watchmaking companies have been chosen as industry sample and the study’s investigation is based on a comparative case study approach. The latter applies both quantitative data, in the form of the respective annual company reports, and qualitative data, in the form of semi-structured interviews with three stakeholder groups. Findings indicate that the investigated measures of sustainability are related the investigated companies’ level of resilience. These findings contribute to the building of new theory towards resilience as this study outlines specifically which measures have been proven to be of relevance for companies’ resilience. Moreover, the results are of high relevance for companies that are operating in constant evolving markets and struggling adapting to any disruptive environment as it is outlined why and how comparative companies have to be sustainable in order to become more resilient towards future shocks.
Resumo:
Introduction We studied the richness and abundance of ant species, their bacteria and the bacteria isolated from patient clinical samples. Methods Ants were collected with baited traps at 64 sites in a public hospital in São Luis, State of Maranhão, Brazil. Results In total, 1,659 ants from 14 species were captured. The most frequent species were Crematogaster victima, Solenopsis saevissima, Tapinoma melanocephalum, Camponotus vittatus and Paratrechina fulva. Forty-one species of bacteria were isolated from the ants and 18 from patients. Conclusions Ants are potential vehicles for pathogenic and opportunistic bacteria, and they can represent a risk factor in nosocomial infections.
Resumo:
In recent years it has been noticed the progressive disappearance of vernacular sustainable building technologies all over the world mainly due to a strong urban rehabilitation process with modern technologies not compatible with ancient knowledge. Simultaneously new dwellings are needed all over the world and in this sense it was decided to study an ecological and cost-controlled building technology of monolithic walls that can combine the use of low carbon footprint materials, such as earth, fibres and lime using an invasive species: giant reed cane (Arundo Donax). This paper explains the development of this building technology through testing diverse prototypes.
Resumo:
ABSTRACTINTRODUCTION:Cryptococcosis is an invasive disease acquired by inhalation of infectious propagules from the environment. Currently, compulsory notification of the spread of this disease is not required in Colombia. However, reporting of human immunodeficiency virus (HIV)/acquired immune deficiency syndrome cases to the National Surveillance System has suggested that there is a growing population at risk of contracting cryptococcosis. Few studies have described the occurrence of cryptococcosis in Colombia. Therefore, in this study, we examined the pathology of this disease in Atlántico, Colombia and determined the distributions of Cryptococcus neoformans and Cryptococcus gattii in the environment.METHODS:Clinical samples/isolates were gathered from cases of cryptococcosis previously diagnosed at health institutions in Atlántico, and surveys were completed by clinicians. The environmental study considered 32 sampling points and three tree species, i.e., Quickstick ( Gliricidia sepium ), Almond ( Terminalia catappa ), and Pink trumpet ( Tabebuia rosea ). Environmental and clinical samples/isolates were analyzed for phenotypic and genotypic confirmation.RESULTS:From 1997-2014, 41 cases of cryptococcosis were reported. The mean patient age was 40.5 years (range: 18-63 years); 76% were men, and 78% were HIV positive. Isolation was possible in 38 cases ( C. neoformans , molecular type VNI in 37 cases and C. gattii , molecular type VGI in one case). In 2012-2014, 2,068 environmental samples were analyzed with a positivity of 0.4% ( C. neoformans , molecular type VNI) in Almond and Pink trumpet trees.CONCLUSIONS:Cryptococcus neoformans , molecular type VNI had a higher prevalence than C. gattii and was associated with human exposure and the pathogenesis of cryptococcosis in this geographical region.
Resumo:
Both culture coverage and digital journalism are contemporary phenomena that have undergone several transformations within a short period of time. Whenever the media enters a period of uncertainty such as the present one, there is an attempt to innovate in order to seek sustainability, skip the crisis or find a new public. This indicates that there are new trends to be understood and explored, i.e., how are media innovating in a digital environment? Not only does the professional debate about the future of journalism justify the need to explore the issue, but so do the academic approaches to cultural journalism. However, none of the studies so far have considered innovation as a motto or driver and tried to explain how the media are covering culture, achieving sustainability and engaging with the readers in a digital environment. This research examines how European media which specialize in culture or have an important cultural section are innovating in a digital environment. Specifically, we see how these innovation strategies are being taken in relation to the approach to culture and dominant cultural areas, editorial models, the use of digital tools for telling stories, overall brand positioning and extensions, engagement with the public and business models. We conducted a mixed methods study combining case studies of four media projects, which integrates qualitative web features and content analysis, with quantitative web content analysis. Two major general-interest journalistic brands which started as physical newspapers – The Guardian (London, UK) and Público (Lisbon, Portugal) – a magazine specialized in international affairs, culture and design – Monocle (London, UK) – and a native digital media project that was launched by a cultural organization – Notodo, by La Fábrica – were the four case studies chosen. Findings suggest, on one hand, that we are witnessing a paradigm shift in culture coverage in a digital environment, challenging traditional boundaries related to cultural themes and scope, angles, genres, content format and delivery, engagement and business models. Innovation in the four case studies lies especially along the product dimensions (format and content), brand positioning and process (business model and ways to engage with users). On the other hand, there are still perennial values that are crucial to innovation and sustainability, such as commitment to journalism, consistency (to the reader, to brand extensions and to the advertiser), intelligent differentiation and the capability of knowing what innovation means and how it can be applied, since this thesis also confirms that one formula doesn´t suit all. Changing minds, exceeding cultural inertia and optimizing the memory of the websites, looking at them as living, organic bodies, which continuously interact with the readers in many different ways, and not as a closed collection of articles, are still the main challenges for some media.
Resumo:
Based on the report for the unit “Sociology of New Information Technologies” of the Master on Computer Sciences at FCT/University Nova Lisbon in 2015-16. The responsible of this curricular unit is Prof. António Moniz
Resumo:
The “Logoplaste: Conquering the world one bottle at a time” case is based on the real story of the Botton family and their journey to build the globally known company Logoplaste. Famous for its “hole in the wall” strategy within the plastics industry, Logoplaste is not only one of the major plastic bottles manufacturers in the world, but also a company which has been proving us that a shared leadership system can be successful within a family business. This case intendeds to demonstrate the dynamics of a family business, illustrating the complexity of the decision making process and how they have successfully mastered dual management in a family firm. Moreover, it also aims to demonstrate that a family firm can be managed in such way that sustainable growth, as a key pillar, can be enabled through a strong focus on internationalization and innovation. A teaching note is available at the end of the case in order to guide students and teachers in their readings. Discussions questions, for debate in class environment, are also provided together with suggested answers drawn together to increase the critical sense and theoretical application of the themes studied in class.