Crescimento alométrico dos tecidos ósseo, muscular e adiposo na carcaça de cordeiros Santa Inês e Bergamácia

O trabalho foi realizado com objetivo de realizar um estudo alométrico dos tecidos ósseo, muscular e adiposo na meia carcaça esquerda de cordeiros em crescimento. Foram utilizados 36 cordeiros machos inteiros, sendo 24 Santa Inês e 12 Bergamácia. Os animais foram confinados em gaiolas individuais e alimentados ad libitum. O abate ocorreu quando os animais atingiram os pesos vivos de 15, 25, 35 e 45 kg. Após a carcaça ter sido limpa e resfriada, foram obtidos os cortes comerciais a partir da meia carcaça esquerda. A quantidade dos diferentes tecidos foi obtida a partir da dissecação da perna, do lombo, da costeleta, costela/fralda e paleta. A quantidade total dos tecidos ósseo, muscular e adiposo foi obtida pela adição das quantidades de cada corte comercial. O estudo do desenvolvimento relativo da composição tecidual foi feito por meio do modelo de HUXLEY (1932). Constatou-se crescimento heterogônico negativo (b < 1) para o tecido ósseo, crescimento isogônico (b =1) para o tecido muscular e heterogônico positivo (b > 1) para a gordura, em relação ao peso da ½ carcaça.

Estudo dos cortes da carcaça de cordeiros Santa Inês puros e cruzas Santa Inês com Texel, Ile de France e Bergamácia

Foram utilizados 103 cordeiros, machos e fêmeas, Santa Inês puros (SS) e cruzas Santa Inês com Texel (TS), Ile de France (FS) e Bergamácia (BS), confinados em gaiolas individuais. Os cordeiros foram abatidos em quatro pesos: 15,0; 25,0; 35,0 e 45,0 kg de peso vivo. Após o abate e resfriamento da carcaça, foram feitos os seguintes cortes e calculadas as porcentagens em relação ao peso da carcaça fria: pescoço (PP), costela/fralda (PCF), costeleta (PC), lombo (PL), paleta (PPA) e perna (PPE), sendo esses dois últimos sem os braços. Os pescoços praticamente não variaram com o aumento dos pesos de abate. Os pescoços dos cordeiros TS e FS foram menores, comparados aos dos cordeiros SS e BS, na maioria dos pesos de abate estudados. A paleta também não variou com o aumento dos pesos de abate, havendo tendência para diminuição. Aos 45 kg, os cordeiros TS e FS apresentaram PPA maiores em relação aos cordeiros SS e BS. Nos outros pesos de abate, praticamente não houve diferenças para PPA entre os grupos genéticos. A costela/fralda elevou-se com o aumento dos pesos de abate, sendo que, em pesos de abate elevados, os cordeiros TS mostraram maiores proporções. Para a PC, praticamente não houve diferenças entre os pesos de abate. As fêmeas FS, entretanto, aos 35 e 45 kg, apresentaram menores PCF que os machos FS. O lombo tendeu a elevar-se com o aumento dos pesos de abate, mas foram detectadas diferenças para os animais abatidos aos 15 kg, em relação aos outros pesos de abate. Entre os grupos genéticos, praticamente não houve diferenças para PL. As pernas diminuíram com o aumento dos pesos de abate. Aos 35 kg de peso vivo, os cordeiros machos TS e as fêmeas FS obtiveram melhores PPE em relação aos outros grupos genéticos.

Feed efficiency of Nellore cattle selected for postweaning weight

Foram comparados dois rebanhos Nelore, um selecionado para maior peso pós-desmame e outro controle, selecionado para a média de peso pós-desmame, para avaliar os efeitos de 29 anos de seleção sobre a eficiência alimentar. Sessenta machos Nelore com 205 kg e 267 dias de idade (41 selecionados e 19 controle), foram avaliados em baias individuais durante a prova de ganho de peso. O desempenho e o consumo de matéria seca foram utilizados para determinar as seguintes medidas de eficiência: conversão alimentar; consumo alimentar residual; ganho residual; eficiência parcial de crescimento; taxa de crescimento relativo; e taxa de Kleiber. Após o período experimental de 112 dias, os animais controle apresentaram menor peso vivo final em comparação aos selecionados, contudo, não diferiram quanto ao consumo de matéria seca (% do peso vivo), à área de olho-de-lombo e às espessuras de gordura subcutânea na altura da 12ª costela e na região da picanha. O consumo de matéria seca (kg/dia) e o ganho médio diário dos animais selecionados foram, respectivamente, 19,4 e 26,4% superiores aos dos controle. O maior ganho médio diário dos animais selecionados promoveu melhora significativa, em torno de 6%, na conversão alimentar; 70 g/dia no ganho residual; e de 17% na taxa de Kleiber. As demais medidas de eficiência (consumo alimentar residual, eficiência parcial de crescimento e taxa de crescimento relativo) não diferiram entre os rebanhos. Os 29 anos de seleção para peso pós-desmame não afetaram a eficiência alimentar de bovinos Nelore.

Performance, carcass traits, meat quality and economic analysis of feedlot of young bulls fed oilseeds with and without supplementation of vitamin E

The objective of this research was to evaluate average daily gain (ADG), carcass traits, meat tenderness and profitability of keeping cattle fed different oilseeds and vitamin E in feedlot. A total of 40 Red Norte young bulls with initial average body weight of 339±15 kg were utilized. The experimental design was completely randomized in a 2 × 2 factorial arrangement. The experiment lasted 84 days and experimental diets presented soybeans or cottonseeds as lipid sources associated or not to daily supplementation of 2,500 UI vitamin E per animal. The concentrate:roughage ratio was 60:40. Diets had the same amount of nitrogen (13% CP) and ether extract (6.5%). The data were analyzed by means of statistical software SAS 9.1. Neither vitamin supplementation nor lipid source affected ADG. There was no interaction between lipid source and vitamin supplementation for the variables studied. The inclusion of cottonseed reduced the carcass yield. There was no effect of diets on hot and cold carcass weights or prime cuts. The inclusion of cottonseed reduced the backfat thickness. No effect of experimental diets on the rib-eye area was observed. There was no effect of lipid source or vitamin supplementation on meat tenderness, which was affected, however, by ageing time. Diets with soybeans presented higher cost per animal. The utilization of soybean implied reduction of the gross margin (R$ 59.17 and R$ 60.51 for diets based on soy with and without supplemental vitamin, respectively, vs. R$ 176.42 and R$ 131.79 for diets based on cottonseed). The utilization of cottonseed enables improvement of profitability of feedlot fattening, in spite of negatively affecting some carcass characteristics.

Epitaxially grown LiNbO3 thin films by polymeric precursor method

LiNbO3 thin films were grown on (0001) sapphire substrates by a chemical route, using the polymeric precursor method. The overall process consists of preparing a coating solution from the Pechini process, based on metallic citrate polymerization, the precursor films, deposited by dip coating, are then heat treated to eliminate the organic material and to synthesize the phase. In this work, we studied the influence of the heat treatment on the structural and optical properties of single-layered films. Two routes were also investigated to increase the film thickness: increasing the viscosity of the coating solution and/or increasing the number of successively deposited layers. The x-ray diffraction theta -2 theta scans revealed the c-axis orientation of the single- and multilayered films and showed that efficient crystallization can be obtained at temperatures as low as 400 degreesC, the phi-scan diffraction evidenced the epitaxial growth with two in-plane variants, A microstructural study revealed that the films were crack free, homogeneous, and relatively dense. Finally, the investigation of the optical properties (optical transmittance and refractive index) confirmed the good quality of the films. These results indicate that the polymeric precursor method is a promising process to develop lithium niobate waveguides.

Spectral redistribution of waveguided emission in BEH-PPV films

We report on spectral redistribution of the photoluminescence (PL) emission from the edge of thin-film planar waveguides of the conjugated polymer BEH-PPV [Poly(2,5-bis(2'-ethyl-hexyl)-1,4-phenylenevinylene] induced by self-absorption in the polymer film. The PL spectra present drastic changes and displace to longer wavelengths with increasing self-absorption. We observe an enhancement of the absolute PL intensity at longer wavelengths, which was interpreted as due to re-emission of self-absorbed photons. The significant efficiency for the PL re-emission suggests the use of self-absorption as a mechanism for tuning the emission into the near infrared.

Structural and electrical characterization of semiconducting barium-lead-titanate ceramics

BaTiO3 is usually doped to achieve the temperature stability required by device applications, as well as to obtain a large positive temperature coefficient anomaly of resistivity (PTCR). Uniform distribution of dopants among the submicron dielectric particles is the key for optimal control of grain size and microstructure to maintain a high reliability. The system Ba0.84Pb0.16TiO3 was synthesized from high purity BaCO3, TiO2, PbO oxide powders as raw materials. Sb2O3, MnSO4 and ZnO were used as dopants and Al2O3, TiO2 and SiO2 as grain growth controllers. Phase composition was analyzed by using XRD and the microstructure was investigated by SEM. EDS attached to SEM was used to analyze phase composition specially related to abnormal grain growth. Electrical resistivities were measured as a function of temperature and the PTCR effect characterized by an abrupt increase on resistivity.

Avaliação da composição química e física dos cortes da costela para estimar a composição química corporal de novilhos nelore

The objective of this study was to establish equations to estimate the empty body chemical composition of Nellore steers using the following indirect techniques: 1) physical composition of the 9-10-11(th) rib cut;) physical composition of the 10(th) rib cut; and 3) chemical composition of the 10(th) rib cut. Thirty-one Nellore steers with weights ranging from 245 to 489 kg and ages from 20 to 29.7 months at slaughter were utilized. The empty body chemical composition was established through samples collected after grinding all animal tissues. The equations using the percentage of dissectable fat in the 9-10-11(th) rib cut shored a high precision for estimating the percentage of water (r(2) = 0.91; Syx = 1.168) and ether extract (r(2) = 0.94; Syx = 1.298) of the empty body; the same was observed when the percentage of dissectable fat in the 10(th) rib cut was used (r(2) = 0.82 and 0.85; Syx = 1.658 and 1.942, respectively, for water and ether extract). The equations using the percentage of ether extract in the 10(th) rib cut showed a high precision for estimating the percentage of water (r(2) = 0.89; Syx = 1.311) and the ether extract (r(2) = 0.89; Syx = 1.730) of the empty body, but there was no advantage over the physical composition of the 9-10-11(th) and 10(th) rib cut. Multiple regressions using carcass weight and the percentage of bones and kilograms of lean, fat, and bones dissectable in the 10(th) rib cut improved the coefficients of determination for water and ether extract to 0.87 and 0.91. The equations to estimate the percentages of protein and ach showed a low precision, indicating that those techniques are not recommended to estimate these components in the empty body of Nellore steers.

Predicting beef carcass retail products of Mediterranean buffaloes by real-time ultrasound measures

Twenty eight Mediterranean buffaloes bulls were scanned with real-time ultrasound (RTU), slaughtered, and fabricated into retail cuts to determine the potential for ultrasound measures to predict carcass retail yield. Ultrasound measures of fat thickness, ribeye area and rump fat thickness were recorded three to five days prior to slaughter. Carcass measurements were taken, and one side of each carcass was fabricated into retail cuts. Stepwise regression analysis was used to compare possible models for prediction of either kilograms or percent retail product from carcass mesaurements and ultrasound measures. Results indicate that possible prediction models for percent or kilograms of retail products using RTU measures were similar in their predictive power and accuracy when compared to models derived from carcass measurements. Both fat thickness and ribeye area were over-predicted when measured ultrasonically compared to measurements taken on the carcass in the cooler. The mean absolute differences for both traits are larger than the mean differences, indicating that some images were interpreted to be larger and some smaller than actual carcass measurements. Ultrasound measurements of REA and FT had positive correlations with carcass measures of the same traits (r=.96 for REA and r=.99 for FT). Standard errors of prediction currently are being used as the standard to certify ultrasound technicians for accuracy. Regression equations using live weight (LW), rib eye area (REAU) and subcutaneous fat thickness (FTU) between 12(th) and 13 (th) ribs and also over the biceps femoris muscle (FTP8) by ultrasound explained 95% of the variation in the hot carcass weight when measure immediately before slaughter.

Desempenho em pastagens e características de carcaça da 16a progênie dos rebanhos Nelore, Guzerá e Caracu de Sertãozinho (sp)

Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.

Distributed feedback multipeak laser emission in Rhodamine 6G doped organic-inorganic hybrids

Organic-inorganic hybrid materials were prepared from an ureasil precursor (ureapropyltriethoxysilane designated as UPTES) and acrylic acid modified zirconium (IV) n-propoxide. Thin films containing rhodamine 6G (Rh6G) were prepared by spin-coating on glass substrates with different Zr:Si molar ratios (Zr:Si = 75:25, 50:50 and 25:75). Refractive index, thickness, number of propagating modes and attenuation coefficient were measured at 543.5, 632.8 and 1550 nm wavelengths by the prism coupling technique. Distributed feedback (DFB) laser effect was observed and studied as a function of films thickness and refractive index.

Photoexpansion and photobleaching effects in oxysulfide thin films of the GeS2+Ga2O3 system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photopatternable di-ureasil-zirconium oxocluster organic-inorganic hybrids as cost effective integrated optical substrates

Organic-inorganic hybrids containing methacrylic acid (McOH, CH(2)= C(CH(3))COOH)) modified zirconium tetrapropoxide, Zr(OPr(n))(4), classed as di-ureasil-zirconium oxo-cluster hybrids, have been prepared and structurally characterized by X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), Fourier transform infrared (FT-IR) and Raman (FT-Raman) spectroscopies, Si and C nuclear magnetic resonance (NMR), and atomic force microscopy (AFM). XRD and SAXS results have pointed out the presence of Si- and Zr-based nanobuilding blocks (NBBs) dispersed into the organic phase. Inter-NBBs correlation distances have been estimated for the pure di-ureasil and a model compound obtained. by hydrolysis/condensation of Zr(OPr(n))(4):McOH (molar ratio 1: 1): d(Si) approximate to 26 +/- 1 angstrom and d(Zr) approximate to 16 +/- 1 angstrom, respectively. In the case of the di-ureasil-zirconium oxo-cluster hybrids, these distances depend on the Zr relative molar percentage (rel. mol. Zr %) (d(Si) ranges from 18 to 25 angstrom and d(Zr) from 14 to 23 angstrom, as the rel. mol. Zr % increases from 5 to 75), suggesting that the Si- and Zr-based clusters are interconstrained. Complementary data from FT-IR, FT-Raman, (29)Si and (13)C NMR, and AFM support to a structural model where McOH-modified Zr-based NBBs (Zr-OMc) are present over the whole range of composition. At low Zr-OMc contents (rel. mol. Zr % <30) the clusters are well-dispersed within the di-ureasil host, whereas segregation occurs at the 0.1 mu m scale at high Zr-OMc concentration (rel. mol. Zr % = 50). No Zr-O-Si heterocondensation has been discerned. Monomode waveguides, diffractions gratings, and Fabry-Perot cavities have been written through the exposure of the hybrid monoliths to UV light. FT-Raman has shown that the chemical process that takes place under illumination is the polymerization of the methacrylate groups of the Zr-OMc NBBs. The guidance region in patterned channels is a Gaussian section located below the exposed surface with typical dimensions of 320 mu m wide and 88 mu m deep. The effective refractive index is 1.5162 (maximum index contrast on the order of 1 x 10(-4)) and the reflection coeficient of the Fabry-Perot cavity (formed by a grating patterned into a 0.278 cm channel) is 0.042 with a free spectral range value of 35.6 GHz.