Studies on the growth and production of six major and exotic carps in Nasti baor, Jhenaidah, Bangladesh

An investigation on growth, production and fishery of three Indian major carps: rohu, Labeo rohita, catla, Catla catla and mrigal, Cirrhinus mrigala and three exotic carps: silver carp, Hypophthalmichthys molitrix, grass carp, Ctenopharyngodon idella, and common carp, Cyprinus carpio was carried out in Nasti baor during February to April months. In catch per unit effort (CPUE) study the highest catch/day/person (3.13 kg) and catch/day/gear (40.65 kg) was recorded in the month of March for kochal fishing. In komar fishing catch/day/person (15.08 kg) and catch/day/gear (1206 kg) was also found higher in March. Komar fishing was done only in March and April and its CPUE was greater in both the months than that of kochal. The average recovery rate (combination of all six species) was 37.80 considering the stocking from July month of the previous year. The recovery rate of common carp (54.1) was the highest and lowest (13.90) in case of silver carp. When the recovery was calculated on the basis of one year data and stocking, it was 55.6%. Analysis of production model revealed that the present production (54,806 kg/year) is less than both theoretical production (model I- 85,285 kg/year and model II -75,952 kg/year) estimated. Therefore, it may be concluded that the fish production from Nasti baor could still be increased from the present level of production.

The socio-economic and cultural structures of the fisherfolk communities

Fishing communities that have exploited the resource for generations constitute the main stakeholder groups in the fisheries of Lake Victoria. Several studies have examined Uganda's Lake Victoria fishing communities and characterised key stakeholders at community level over the last decade (SEDAWOG 1999a and b; Geheb 1997; FeSEP 1997; Kitakule 1991). The communities are made up of scattered settlements at the shores and on islands. The categories of people living in these communities include fishers who consist primarily of large numbers of male youths who provide labour to boat and gear owners. There are resident and non-resident fish traders who after securing their supplies at the beaches, depart for their market destinations. In addition, there are fish processors, mostly operating traditional and improved smoking kilns. Many other people, dealing in provisions and supplies also stay at the beaches, their activities depending on the level of fish catch. The fishing communities of Lake Victoria, Uganda, include auxiliary livelihood activities such as boat building, net repairing and transportation; bait supply and beachside kiosks, video halls and retail shop business. Other economic activities are brick making, charcoal burning/wood trade, farming and livestock keeping.

The potential for co-management in fisheries

Concerns have been raised over the sustainability of the fisheries resource base of Lake Victoria for some time. The draft National Fisheries Policy states: "The key issues in the fisheries sector are resource depletion through overfishing aggravated by use of destructive fishing gear and methods" (MAAIF 2000). A fishery is said to be degraded if any or all of the indicators begin to show including decline in catches from the fishery, higher proportion of immature fish in the catch and reduction in the species composition of the catch. Inadequate implementation of fisheries management is considered the main cause of resource degradation. One of the factors identified as constraints to fisheries management has been lack of involvement of the resource users.

Assessment of the performance of beach management units (BMUs) on Lakes Victoria, Albert, Kyoga and George

Until the late 1990s the fisheries of Ugandan lakes had been managed by government where stakeholders were excluded from the decision-making process. In order to involve other stakeholders, co-management was adopted. Operationalising Co-management on landing sites has led to the formation of BMUs at gazetted landing sites. A BMU is made up of a BMU assembly and the BMU committee that it elects. A BMU committee should be: 30% boat owners; 30% boat barias 30% including fish processors, boat makers, local gear makers and repairers, fishing input dealers and managers and 10% fish mongers/traders; and if possible, 30% women. To operate at a particular landing site, one must be registered with the BMU. The BMU assembly is the supreme organ of a BMU empowered to elect, approve and remove the BMU committee

The need for a trawl fishery on Lake Victoria

The idea of mechanised fishing on Lake Victoria is not new. Trawling experiments have been carried out in the past by the East African Freshwater Fisheries Research Organisation (EAFFRO), the Lake Victoria Fisheries Service and the Uganda Fisheries Department. In 1950 it was recognised by EAFFRO that commercial possibilities existed in the exploitation of Haplochromis by this gear. However, it was not until 1966 that, by a happy collaboration of the Uganda Fisheries Department and EAFFRO, the vessel 'Darter' was converted into a stern trawler and serious and successful experimentation into trawl fishing commenced. Darter has continued to undertake trawling work ever since and this work was augmented by the arrival in 1967 of the Lake Victoria Fisheries Research Project's vessel 'Ibis'.

Final report of the baseline data reconstruction for the Quality Assurance for Fish Marketing Project

A baseline survey for the project which had been conducted in 2009 had gaps that could not allow assessment of project performance in the outcome and impact indicators to be made. This study was, therefore, commissioned to reconstruct the baseline data, aligned to the impact and outcome indicators on the project logframe and results framework, against which project achievements could be assessed. The purpose and scope of the study was to reconstruct the baseline data and analysis describing the situation prior to QAFM Project inception, taking 2008 as the baseline year, which was aligned to the project logframe outcome and impact indicators; to collect data on current status to compare project outcome (and where possible impact) in improved fish handling sites in comparison with the baseline as well as with comparable non-improved fish landing sites as control group. The study was conducted through secondary data search from sources at NaFIRRI, DFR and ICEIDA. Field data collection was carried out using a sample survey covering 312 respondents including boat and gear owners, crew members, processors and traders at eight project and two control landing sites. Key Informant Interviews were conducted with DFOs and BMU leaders in the study districts and landing sites respectively.

Fishery resource assessment and monitoring in the development and control of fisheries in the Lake Volta

Gill-netting and rotenoning have been used for assessing and monitoring fish stock abundance in Volta Lake. The lake and the main gear types used on it have been described. Before a gill-net sampling plan was set up, a preliminary survey was undertaken which largely determined the final form of the plan. An investigation as to whether or not the lake was being overfished concluded that it was being underfished. Commercial and experimental catch data analyses disclosed that the adults of the small species were being little utilized. Commercial sized species were also not being harvested according to their apparent proportion in the population. Production is presently fluctuating between approximately 37,000 and 40,000 tonnes. A high correlation between commercial and experimental catch was realized. Developments which have followed in the wake of stock assessment and monitoring studies include: introduction of monofilament nylon net, development of a special scoop net to permit mass harvest of clupeids after they have been attracted to light, and the design of a larger canoe which would help to extend the fishery into open water. New regulation and management policies will have to be formulated in the light of new findings before a rational exploitation of all the species can be achieved.

Report of the catch assessment survey: fishery survey of Kyoga Lakes August 1990 - March 1991

This report presents the information obtained during catch assessment surveys made by the ADP Fishery Survey of Lake Kyoga and Lake Kwania between August 1990 and July 1991. It supersedes previous interim reports on these surveys. The Kyoga lakes had not been surveyed in a long time. Information on the state of the stocks was largely confined conclusions drawn from data collected along the southern shore of L.Kyoga proper. The effect of harmful/illegal gear types on the stocks was not documented. Part I provides a description of the survey. Part II comprises a review of the fishing strategies. Parts III and IV present the principal results obtained on L.Kyoga and L.Kwania. Part V presents a discussion of the main conclusions.

Modal liquid crystal devices in optical tweezing: 3D control and oscillating potential wells

We investigate the use of liquid crystal (LC) adaptive optics elements to provide full 3 dimensional particle control in an optical tweezer. These devices are suitable for single controllable traps, and so are less versatile than many of the competing technologies which can be used to control multiple particles. However, they have the advantages of simplicity and light efficiency. Furthermore, compared to binary holographic optical traps they have increased positional accuracy. The transmissive LC devices could be retro-fitted to an existing microscope system. An adaptive modal LC lens is used to vary the z-focal position over a range of up to 100 μm and an adaptive LC beam-steering device is used to deflect the beam (and trapped particle) in the x-y plane within an available radius of 10 μm. Furthermore, by modifying the polarisation of the incident light, these LC components also offer the opportunity for the creation of dual optical traps of controllable depth and separation. © 2006 Optical Society of America.

Optical tweezing beam control using liquid crystal adaptive optical elements

Liquid crystal (LC) adaptive optical elements are described, which provide an alternative to existing micropositioning technologies in optical tweezing. A full description of this work is given in [1]. An adaptive LC prism supplies tip/tilt to the phase profile of the trapping beam, giving rise to an available steering radius within the x-y plane of 10 μm. Additionally, a modally addressed adaptive LC lens provides defocus, offering a z-focal range for the trapping site of 100 μm. The result is full three-dimensional positional control of trapped particle(s) using a simple and wholly electronic control system. Compared to competing technologies, these devices provide a lower degree of controllability, but have the advantage of simplicity, cost and light efficiency. Furthermore, due to their birefringence, LC elements offer the opportunity of the creation of dual optical traps with controllable depth and separation.

Application of level II reliability theory

Level II reliability theory provides an approximate method whereby the reliability of a complex engineering structure which has multiple strength and loading variables may be estimated. This technique has been applied previously to both civil and offshore structures with considerable success. The aim of the present work is to assess the applicability of the method for aircraft structures, and to this end landing gear design is considered in detail. It is found that the technique yields useful information regarding the structural reliability, and further it enables the critical design parameters to be identified.

Holographic offset launch for dynamic optimization and characterization of multimode fiber bandwidth

Optimization of the bandwidth of a 2 km 50 μm multimode fiber at 850 nm is investigated theoretically and experimentally by steering a single spot, or two in antiphase spots across the core of the fiber in two dimensions using a ferroelectric liquid-crystal-based spatial light modulator. This method not only allows an optimal offset launch position to be chosen in situ but can also characterize the geometry and position of the core, identify defects, and measure the maximum differential mode delay. Its ability to selectively excite specific mode groups is also of relevance to mode-group division multiplexing. © 2012 IEEE.

Fabrication of carbon nanotubes on inter-digitated metal electrode for switchable nanophotonic devices

This paper reports the modeling and characterization of interdigitated rows of carbon nanotube electrodes used to address a liquid crystal media. Finite Element Method modeling of the nanotube arrays was performed to analyze the static electric Fields produced to Find suitable electrode geometry. A device was fabricated based on the simulation results and electro optics characteristics of the device are presented. This Finding has applications in the development of micron and submicron pixels, precise beem steering and nanotube based active back planes.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering.

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69μm unsteered, 3.70μm steered; elevational precision 38.67μm unsteered, 3.64μm steered. Similar results were found in the phantom data: lateral precision 26.51μm unsteered, 5.78μm steered; elevational precision 28.92μm unsteered, 11.87μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates.

Ultrasonic imaging of 3D displacement vectors using a simulated 2D array and beamsteering

Most quasi-static ultrasound elastography methods image only the axial strain, derived from displacements measured in the direction of ultrasound propagation. In other directions, the beam lacks high resolution phase information and displacement estimation is therefore less precise. However, these estimates can be improved by steering the ultrasound beam through multiple angles and combining displacements measured along the different beam directions. Previously, beamsteering has only considered the 2D case to improve the lateral displacement estimates. In this paper, we extend this to 3D using a simulated 2D array to steer both laterally and elevationally in order to estimate the full 3D displacement vector over a volume. The method is tested on simulated and phantom data using a simulated 6-10 MHz array, and the precision of displacement estimation is measured with and without beamsteering. In simulations, we found a statistically significant improvement in the precision of lateral and elevational displacement estimates: lateral precision 35.69 μm unsteered, 3.70 μm steered; elevational precision 38.67 μm unsteered, 3.64 μm steered. Similar results were found in the phantom data: lateral precision 26.51 μm unsteered, 5.78 μm steered; elevational precision 28.92 μm unsteered, 11.87 μm steered. We conclude that volumetric 3D beamsteering improves the precision of lateral and elevational displacement estimates. © 2012 Elsevier B.V. All rights reserved.